Let’s Kick Off This 35 Year old 4WD Build!

Подписаться 74 тыс.

Просмотров 40 тыс.

50% 1

#build #4x4 #offroad
Kicking off the build with some engine mods, rear quarter chop & chassis bracing on our cheap td42 GQ Patrol build!
Our Website: roamlyfe.com
Socials: Roam Lyfe
Supported by;
www.superiorengineering.com.au/
www.dieselconversionsaus.com.au/ (code: Roamlyfe10)
www.kingfabkustoms.com/
destaautomotive.com/ (Code: ROAMLYFE15) 15% Off
Quarter chop td42 injectors injector install chassis bracing clearance wheels lift tyres build how to diy cut chop replace full build rock crawler overlander camping

Авто/Мото

Опубликовано:

11 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 107

@SpikerDragon95 10 месяцев назад

Man the TD engines has such a nostalgic sound for me, my dad (rip) used to drive an 1990 D21 with the NA TD27 and man I got such good memoried with that truck, right now is sitting in our warehouse waiting for new cylinder head

@MattysWorkshop 10 месяцев назад

Gday, congratulations on number 2, I hope Mum and bubs are all well, the quarter chop is heaps easier with the pre cut plates, top job mate, cheers

@RoamLyfe 10 месяцев назад

Thanks mate!! Oh god, I’ll never do another chop again without the plates 😆😆

@WHATTHE4X4 10 месяцев назад

Some weld through primer would be good on the panels

@lockednloaded_4x4 10 месяцев назад

watching this gets me motivated to get cracking on the shorty

@SarahandKeelanTravels 10 месяцев назад

what a weapon! patrol goes pretty good too! love the cinematics!

@RoamLyfe 10 месяцев назад

I’m gonna have to start doing my hair before I film if I get more comments like this 😆😆 Thanks guys, been repping the shirt everywhere 🫶

@mangoboyz4209 10 месяцев назад

Hi from the UK... Love watching you do your stuff...

@RoamLyfe 10 месяцев назад

Thanks so much mate!

@jimsbbqs4320 10 месяцев назад

10 years adventure corp will be doing weld in chassis with all the rust that will be happening under their DIY products

@leightonB69 10 месяцев назад

Congratulations on baby 2 GQ is going to be awesome

@RoamLyfe 10 месяцев назад

Thanks mate!!

@Patrols4Lyfe 10 месяцев назад

Make it a Sleeper weekender patrol from the outside look close to stock with no bar work, but go all out with Big wheels and suspensions but others keep it quiet from the outside and loud exhaust ❤ love Roam Lyfe

@RoamLyfe 10 месяцев назад

Not a bad idea hahaha!

@OscarCondon 10 месяцев назад

perfect timing

@SchysCraftCo. 10 месяцев назад

Rome it's coming along nicely man. Can't wait to see more videos soon. Congratulations on the new kid.

@RoamLyfe 10 месяцев назад

Thanks a lot mate!

@thomasclaes6140 10 месяцев назад

Great video like always, keep it up 👍💪

@coopergeurts6196 10 месяцев назад

Your killing it man, grand to see how far you have come 👍🏼

@RoamLyfe 10 месяцев назад

Thanks Coops!! 🫶🫶🫶

@Gemidrift 10 месяцев назад

Congrats to you and the Mrs on the safe arrival of apprentice number 2 ! I figure it was about time

@RoamLyfe 10 месяцев назад

Thanks mate! Two little helpers Yeww 🤘

@Deano_GU 10 месяцев назад

Congratulations on the 2nd mate! I’ve got two boys 4 and 7 and as much as they can be a pain I wouldn’t change it for the world 😎 keep up the good work man love the builds 👌🏼

@RoamLyfe 10 месяцев назад

That’s awesome, I’m really enjoying being a dad hey! I’m assuming it gets a lot harder but the good out ways the bad! 🤘

@alexanderpitt8672 10 месяцев назад

The quality of the shots and editing where elite

@RoamLyfe 10 месяцев назад

Thanks mate!!

@Getuppa 10 месяцев назад

🔥

@jessetink3753 10 месяцев назад

This will be an awesome build 💙👍🏽

@RoamLyfe 10 месяцев назад

It’s got me excited that’s for sure!

@nathanknibb8634 10 месяцев назад

Keen to take it wheeling bro! Single cab vs wagon

@RoamLyfe 10 месяцев назад

Sounds good bro!!

@psyco9991 10 месяцев назад

When are u putting a roof rack on the gu patrol? vid for it, maybe a custom made one?

@sweetrider34 10 месяцев назад

just a tip! when ever welding a plate or metal on metal, make sure to clean/prep and paint the under surface with a weld through primer , that bare metal that's now exposed under the metal is prone to potential rusting even if fully welded, its good practice! other then that, its looking good!

@RoamLyfe 10 месяцев назад

I actually have been looking for some weld through for ages!! Do you think the sikkaflex will help if I fully seal it?

@harro9447 10 месяцев назад

@@RoamLyfe Definitely seal it but the main issue is condensation behind the plate which is bound to happen with temperature changes then rust will set in I have seen it on a few cars

@andrewt3952 10 месяцев назад

Weld through primer is a must

@sweetrider34 10 месяцев назад

Yeah I would, sikkaflex will get into all the weld crevices to help seal it the best it can, just make sure you apply and press it in over the welds

@ScooterProductions96 6 месяцев назад

@@RoamLyfesearch Weld #2 Upol weld through primer I’m a panel beater and that’s all we use good stuff

@TommyVulzz 10 месяцев назад

Congratulations on number 2 mate 👏 👍🎉

@RoamLyfe 10 месяцев назад

Thanks bro!!

@Big-Blueo6 10 месяцев назад

Just have a question man if your putting a tube rear bar on a series 4 gu do you have to do the rear quarter chop

@Moretrailsmorecamping 10 месяцев назад

I pick up my patrol next week, this is only making me more excited. Really nice work man and congrats on the second boy, I have two boys myself and it's the best. I know the fam keeps you busy but we really appreciate the time you put into these vids, look forward to the next one.

@RoamLyfe 10 месяцев назад

Yeww, go the patrol! You’ll love it when you get it 🤘 And thanks mate, very busy at the moment but I love making content so I’m keen to knuckle down again!

@harrywalker968 10 месяцев назад

@@RoamLyfe i see you got the torque specs right,, on the 1940,s engine.. go look up specs on an mwm sprint. 4.2tdi.. mine has 700nm.. 97 - 07. still built in brazil, under german licence.. there a german tractor engine. fitted to s/duty & silverado.. had mine 7 yrs, no probs.. 260 ks. 01 s/duty. aus.. just bought a nissan,,so my nightmares begin,,eh..i just dont like toyotas.

@harrywalker968 10 месяцев назад

@@RoamLyfe ???????????.. you dont get new seals,?????????? what sort of rip off is that,, fuck,, there a dollar for 100.. never use old seals, gaskets, ect..

@harrywalker968 10 месяцев назад

@@RoamLyfe waaaaat,, yu need to do,,is piss off that tow bar. put a decent rhs, between the chassis under the doors, weld thru a hitch reciever. like i do..front & rear, for winches.. your lowest point is,, the tow bar..

@harrywalker968 10 месяцев назад

@@RoamLyfe shoulda used weldable primer, front & back.. welding, do 1/2 to 1'' welds every 6'' to 1', stagger weldes, like torque ing a head.. then weld back to the previous weld not away from it, stops warping..

@jakekingston5263 10 месяцев назад

what are your setting for Mig welding sheet metal?

@bendodd1964 10 месяцев назад

keens as for more videos congrats on number 2!

@RoamLyfe 10 месяцев назад

Thanks mate!

@skoyment1297 10 месяцев назад

how did you do the pump adjust bit??

@jaidenjefferies3474 10 месяцев назад

Hell yeah

@CodPlaya68 10 месяцев назад

Hell yeah man

@brentmcd12 10 месяцев назад

Goodwork! cool to see! 🛻😎🤙📹

@robertbland1673 10 месяцев назад

Congratulations on number 2. I love the chassis braces but the A cut in to it i would be welding up. I am worried water will get in behind it and not get out with the rest being welded up. Keep it up

@RoamLyfe 10 месяцев назад

I’m gonna smear sikka inside the A to stop exactly that! I’ll smooth it off so you can see it etill

@1hzisgodsengine 10 месяцев назад

Love the vide mate 👌

@RoamLyfe 10 месяцев назад

Thanks legend!

@MicahBell_1860 10 месяцев назад

Not another bloody Patrol!

@RICHYSUNCLE 10 месяцев назад

Tb on 🔝

@Dms37. 10 месяцев назад

Yew love ya content bro

@kasonknox1173 10 месяцев назад

finally doing some stuff to it yewww

@RoamLyfe 10 месяцев назад

So keen to get started!

@Suitmyselff 10 месяцев назад

Do you have to brace the inside of the chassis as-well? or is the outside sufficient enough, been looking into doing mine at some stage!

@RoamLyfe 10 месяцев назад

Oh my last Ute I did the inside as well, I think it’s worth doing on a rusty looking chassis but if your chassis is in good condition I’d say just the outer would be enough!

@leighchaseling7102 10 месяцев назад

Just wondering about the welding, are you supposed to fully weld or leave a gap to allow flex

@RoamLyfe 10 месяцев назад

You’re supposed to fully weld as it stops the dirt sitting being the plate, alternatively you could weld sections and seam seal the rest!

@andrewt3952 10 месяцев назад

Hope u swapped out old washers with new injectors

@cal6303 10 месяцев назад

ill take it thanks haha

@RoamLyfe 10 месяцев назад

😆😆😆

@nickunw 10 месяцев назад

Loving the vids. What crack pressure injectors did you go? Think 100psi is standard

@RoamLyfe 10 месяцев назад

Tbh mate I have no idea, I just called Desta auto for them and he sorted it out 😆

@nickunw 10 месяцев назад

@@RoamLyfe thanks man. I was doing some reading. Many shops up them to 130psi. Need to advance the pump a smidge to compensate. Maybe that’s why you had to wind yours forward a little. Apparently better fuel atomisation and efficiency. Keen for the build!

@bendella8827 10 месяцев назад

I feel I’ve been waiting forever for another ep

@RoamLyfe 10 месяцев назад

Sorta mate! I’ve just had a lot on but will be getting back into the swing of things now!

@qubepoint3968 10 месяцев назад

Looking at buying the same injectors from desta can find them?

@RoamLyfe 10 месяцев назад

If you call them they can supply them! They don’t list them on the website!

@joshpresto9289 10 месяцев назад

hey i ordered a sticker over a week ago still hasn’t been shipped just wondering when that will happen ?

@RoamLyfe 10 месяцев назад

Hey mate sorry we have been flat out, your sticker is on the way if you havnt already gotten it!

@darcywoolley9351 10 месяцев назад

Desta doesn’t even have any TD42 injectors on there site. Does anyone know where I can get them from?

@RoamLyfe 10 месяцев назад

Call Desta auto and he will sort them for you

@RoamLyfe 10 месяцев назад

Just say you watched my video, and also ask for washer kit for them!

@user-fh5so6rw4e 10 месяцев назад

Hey mate love the vids!!! Can you tell me what a 10-15k 4wd I should be looking at? I want to start out but not go crazy on one

@RoamLyfe 10 месяцев назад

Hey bro! I’d honestly Probly look at a cheap patrol! Or go a RC Colorado !

@user-fh5so6rw4e 10 месяцев назад

@@RoamLyfe cheers, but what would you say they’d have to meet? Like kms wise?

@RoamLyfe 10 месяцев назад

@@user-fh5so6rw4e it’s a hard one, 200ish is a good aiming point, try for a rd28 patrol maybe too

@user-fh5so6rw4e 10 месяцев назад

@@RoamLyfe cheers mate keep up the good stuff keen to see where this patrol ends up

@manlyfan101 10 месяцев назад

1fz 80, 400k kms is bugger all can find them in much better condition than nearly all gqs

@nickunw 10 месяцев назад

One more Q, what pump advance are you running? Thanks mate

@RoamLyfe 10 месяцев назад

Another one! Haha I actually jsut winged it dude, till it sounded good, could Probly use someone that knows that they are doing with it 😆

@nickunw 10 месяцев назад

Love it man! Cowboy spec

@Tb48life 10 месяцев назад

When are you getting more merch in?

@RoamLyfe 10 месяцев назад

Hey bro, I got a new design just trying to sort the shirts out, might have to do a pre order again! 🤘

@shugie2199 10 месяцев назад

Hey mate, just went to put through an order through desta using your code and it doesnt seem to be working as of right now, just thought I'd let you know. I'll be trying a few times in the next couple days for sure

@RoamLyfe 10 месяцев назад

Hey mate try and give them a ring and make sure it’s in all caps !

@shugie2199 10 месяцев назад

@@RoamLyfe ah okay the caps might be the problem. Whenever I enter in caps it defaults to lowercase after entering it. I’ll let Desta know