I got the exact same problem today. I opened it and pushed on the big Grey flat cable socket on the main board and the problem stopped. I tried it during a few hours and everything looks fine for now. Do not push too much on the main board... So it may be à bad contact in this socket..will see 🤞
Any updates?! I haven't tried that but i do know that just by me taking it apart and wiggling some stuff around inside, the provlem was gone for a few days...
Had the same problem, just opened it and pushed the grey flat cable on the socket. Works for now, the problem is gone for now, hope it lasts. Any updates on if the problem returned or is everything still working fine?
Got the same issue. Pushing the gray cable down seems to work also for my case. 2 days now without the issue. I was planning to clean-lubricate the encoders but the design does not help at all. Resolder or replace the gray flat cable it will bemuch easier (if its needed in the future) than fix-replace the encoders. Thank you
What you need to do with the Lexicon that big black button that you see right there with a screening and the numbers just look like it's just going back and forth you need to push the big button in and why don't you put the big button and it going to sit and then you can just turn the big butt and he going to start turning the numbers you can see the number start changing thank you bye-bye
