LG 65" LED TV No Backlight Or Blue/Purple Tint EAV63673007 65UJ6300-UA 

I want to express much appreciation for your video. It helped me fix my 65UJ6300-UA TV. It was perfectly shown and it took me a lot longer than your video but it very clear. I was slow because I don't usually do this but you gave me the confidence! Again, thank you🙂My TV picture looks brand new!!😎

I replaced mine with the help of this video, so thank you! I saved myself a few hundred instead of replacing my TV. Took me about 3 hours (because I'm overly-cautious). I have some notes based on my experience that will hopefully help others: The address bars on the bottom have some sort of fabric-like tape. It's okay to remove them when disassembling the bezel frame, just don't cut them because you can stick them back on later. The reflector frame is a hassle to remove. Just pull up on the frame gently while prying the bezel clips. Most importantly, carefully align the LEDs before taping them down. You have to ensure the raised circular bumps on the frame align with the holes in the led strips. I had to cut holes into the double sided tape so the strips could make proper contact with the frame.

Thanks to this video I was able to fix my LG 55 inch 55UJ635V which I bought second hand off ebay. Thank you for the brilliant step by step guide 😁

Just successfully repaired my 86" using this as a guide and parts from shopjimmy. The suction cups are a must and I recommend getting them a little wet before you grab, at least that was the case with a big panel. I initially dropped mine about 6" but luckily nothing broke.

Thank u shop jimmy!! I fixed my 82 inch lg tv. It had a couple more parts than this one but it was more or less the same. Picture is great now. Keep doing these videos!

I just took mine apart and replaced the LEDs and now I have a black screen. I'm guessing I didn't hook something back up but I'm spent as I cracked one of the corners and it spiderwebbed.

Your awesome my tv this exact model has the same issue and although I'm handy I would have never tried this repair without this video. Now I have full confidence in making the repair myself. I had basically written off this tv. Thank u so much for sharing videos like these.

Some notes. The edges of this thing are SHARP, and I don't mean the brand. Do not try to lift it for leverage with your bare hands. If your model has a power button in the bottom middle, it just slides off once the back is removed. There's another screw underneath that has to be unscrewed afterwards. some of the procedures shown in this are incredibly difficult on real models, and it may be worth paying someone insured to do it. I had to sever ribbons that appeared to be plain cloth to free the chips, and even then I had to saw off a plastic tab with a razor blade to free one of them without damaging the circuit board. I also cut my hands on the frame nearly a dozen times and bled all over the the light filters, and broke the plastic bevel layer in two places while trying to release the snaps. Only to find that when I finally reached the light strips, apparently I had followed the link on v=Lv4pJgwHYjs instead and accidentally ordered the wrong part. At this point I do not have high hopes of successful repair when the right part comes in. They make it look easy in this video because this unit has already been disassembled in the past. This is not my first time repairing sensitive electronics, but nonetheless I'm an amateur and would recommend caution to other amateurs. In my case I don't really care too much if the TV can't be fixed, so it's not a huge loss, but if your TV is important to you and you wish to avoid having to replace it with a new one, it's likely worth getting someone experienced specifically in large TV repair to do it.

Thank you. The video helped me a lot. I replaced the LEDs and it works great..

These steps worked perfectly for me. Saved having to go buy a new TV.

Tip: this is the only LCD I've seen that won't turn on backlights unless panel is connected or PDIM signal is disconnected. I usually do tests to make sure all is working before proceeding.

when you turn the tv to reach the front panel wat did you do with the back ? did you put the back cover back to protect the mainboard ?

Used SJ and this video to fix my LG 86” with blue clouds. If I can do it, you can do it!

Note: he is using quality metal vacuum clamps, not the cheap plastic(red) ones as shown in other vids. Broke my 55" glass...

I bought mine 2nd hand, it had been stood in a pub, iv got blue tinting blotches but not gonna risk it so getting a proper repair man in, but thanks, just hope its not totalled 😢

Hi Jimmy, I installed the strips which had double sided tape on the back already. They are lifting slightly in a couple of places. Is there anyway to fix them without having to take them up and start again?

Thanks 🙏 was really just looking how to pry the back off 👍. The local “YOU BREAK WE FIX” repair shop said it was a non available part and will be $450 to fix which is almost a new TV 🤦🏽 so they said we can toss the tv for you !!!! 🤬 this is what they told my brother, so I went and picked it up to fix it and all a sudden they could find the part and do it for $150 (with asurian) insurance 😡 it’s a $25-$50 part for the dim screen ! Not the first scam from them I heard after this

You sir, are a hero

with my patients ill break it. great video i thought it was a simple fix but it looks like time consuming which i don't have thanks anyway

I fexed my tv. Tank you so much

Hello What order should the light filter sheets be in as ive mixed them up i know the thickest one is the last one but i think out them the wrong way as ended up being able to see the LED circles since repair

So when you have a dark screen how are you able to tell if the leds are bad or its maybe the wire harness for the leds?

Is this for a screen that is black with no image but still has sound? I was expecting a bulb replacement instead of LED light strips.

I have a 65UJ630V and want to take the back light from a 65UM7400PLB, any idea if this will work, appreciate your advice thanks.

Does the Stripes work also for my lg 65UK6300LLB?

Used suction cups on the screen and replaced the LEDs fine. Thought there was dirt under the screen when I laid it back in the tv frame. Lifted the screen and it broke. Is the glass available to buy?

سلام عليكم المشكلة مشعارف ارفع غطاء شاشة 65 ال جي وهل هناك قفل داخلي مع العلم هناك صورة قفل على الغطا ارجو اسعافي في هذا الوضع وشكرا

thank you

In my screen I have the light filter scratch I need to replace it where can I find it ?

I guess Its the same for the 65UJ6309?

Thanks a lot!!!

I followed step by step & the tv doesn’t turn on anymore. What could’ve possibly went wrong?

I got LGTV 49"inch Broken Display, Model # LG49UJ6300 where can find Flat LCD Screen for Replacement.

How many stripes do I need if I have to replace everything? On eBay I found them in an 4, 8 and 12 pack? How many did you use?

I've got an LG 65uj6309 (65uj6309-ZA) The TV you've shown seems similar to mine. Am I right or is it the wrong Tutorial for me and my TV? Thx for any information

The suction cups put a spot in the screen on one side 🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️

Just ordered the parts from Shop Jimmy for my 86" with a blue tint. Do you think the 86UM8070PUA model is similar in process?

65 диагональ сложно матрицу одному снимать....

Does the 65” use 12 LED strips?

So looks like just need to buy the suction cups to remove screen no other extra parts or tools needed.

That was soo expensive... It is much cheaper to verify what LEDs are faulty and just replace them.

LG tv's are the worst to strip Down

For what you doing this? Scratches everywhere 🤦 put this tv to the bin.