Welcome back to Robu's Two Minute Tutorials!
In this quick 2-minute tutorial, we'll show you how to install the necessary library and interface an ultrasonic sensor with your Raspberry Pi. Ultrasonic sensors are a popular choice for projects that require distance measurement, like robot navigation or home automation.
First, we'll guide you through installing the required Python library to communicate with the ultrasonic sensor. Then, we'll demonstrate how to wire up the sensor to your Raspberry Pi and write a simple script to read distance measurements.
Don't forget to subscribe to Robu's Two Minute Tutorials for more quick fixes, helpful tips, and in-depth guides to enhance your Raspberry Pi experience. Hit the notification bell so you never miss an upload!
Useful Commands:
1. To update packages: sudo apt update
2. To install library: sudo apt install python3-RPi.GPIO
Refer this link for circuit diagram and code:
github.com/Rob...
==========================================================================
Visit the product used in this video:
Raspberry-Pi 4 Model B: robu.in/produc...
Ultrasonic sensor: robu.in/produc...
Breadboard: robu.in/produc...
1K ohm resistors: robu.in/produc...
Also check out this helpful videos:
• HOW DOES AN ULTRASONIC...
• How To: Interface HC-S...
Visit our store: Robu.in
======================MUSIC CREDIT =====================================
Space Technologies by MaxKoMusic | maxkomusic.com/ Music promoted by www.chosic.com... Creative Commons Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) creativecommon... ========================================================================
1 окт 2024
