Hello George, excellent video. I have an Elite Miracle One gates opener set up with master and slave motors for double doors and currently I have a Genie compatible radio receiver wired with 3 wire: ground, radio, and 24v; I want to replace my radio receiver with Liftmaster 859LM as I need to make it Chamberlain remotes compatible and I am not certain if I can wire the new 850LM with only the 3 wire or do I also need to add 24v power to the unit? Any advice is much appreciated. Thank you
you can use a wifi controlled I/O switch, something like this www.amazon.com/Controller-Smartphone-Compatible-Assistant-Required/dp/B07QG7RGFW/ref=asc_df_B07QG7RGFW/?tag=hyprod-20&linkCode=df0&hvadid=343181709993&hvpos=&hvnetw=g&hvrand=12302785113405512879&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031019&hvtargid=pla-737912266293&psc=1&tag=&ref=&adgrpid=71699974200&hvpone=&hvptwo=&hvadid=343181709993&hvpos=&hvnetw=g&hvrand=12302785113405512879&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031019&hvtargid=pla-737912266293 there should be two terminals that go to the open/close switch on the garage door opener, you can wire in a wifi controlled relay to trigger the switch remotely.
I put a 365lm to my commercial liftmaster T 5011 to remote control the open and close. The problem is that it has to wait the door fully open or close before I can reverse it. Any suggestions?
That's usually how most all garage door openers function. I don't think you can do anything to change that. There might be an additional switch for a "stop" button that you can wire to a button though.
@@harbinguy1 I did not do that in my video but I saw another video of your liftmaster T 5011 and someone had a controller that had 3 buttons, up, down and stop.
