Тёмный

Line following robot without arduino || 5V relay line follower robot || motor driver not required. 

Skynet Robotics
Подписаться 340 тыс.
Просмотров 64 тыс.
50% 1

#linefollower #robot #arduino
Business inquires
E-mail : skynetrobotics123@gmail.com
Connect With Skynet Robotics
Facebook: / skynetroboticspage
Instagram: / skynetrobotics
For Ready Made Electronics projects Message me on WhatsApp
+919075800409
WARNING:
This video is for demonstration and education purpose only. Each demonstration presents risk and hazards that must be fully understood before attempting. And should be performed only by professionals.
By Skynet Robotics #skynetrobotics
Avinash Sonawane
In this video tutorial you can learn how to make a line follower robot without Arduino
line following robot is one of the favorite project in the field of robotics engineering.
in this arduino line following robot tutorial you can make line follower robot using arduino and line following robot without arduino.
We can make line following robot with obstacle avoidance. line following car and line follower robot working mechanism is same . simple line following robot can be buid without microcontroller.
arduino line following robot required code to be upload in Arduino.
This is award wining project in line follower robot competition.
line follower robot using microcontroller needs programming and fast line follower robot requires high quality sensor . arduino line following car video i have uploaded you can visit.
By Skynet Robotics #skynetrobotics
Avinash Sonawane
#arduinoproject #engineering #howto #electronic #project #robotics

Наука

Опубликовано:

 

18 ноя 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 234   
@airkehidupan1298
@airkehidupan1298 Год назад
Very nice thank you for your video. waiting for next following robot
@paulmeynell8866
@paulmeynell8866 2 месяца назад
I made one of these at school it worked great
@shivanshguptakhard3447
@shivanshguptakhard3447 6 месяцев назад
This would be more cost effective only worry is if it could work as good as motor driver one or equivalent to it
@shivanshguptakhard3447
@shivanshguptakhard3447 6 месяцев назад
Which robot is better this one or the one you made using motor driver. Which will work better ?
@shaalinishaalini7368
@shaalinishaalini7368 Год назад
Sir now it's working perfectly sir thank you so much tomorrow I submit my project with confidence sir .Thank you
@skynet-robotics
@skynet-robotics Год назад
All the best
@shiv.aff94
@shiv.aff94 Год назад
@@skynet-robotics per inhe oder kaise kare sari link dedo na pls
@manojkumarhalder8226
@manojkumarhalder8226 5 месяцев назад
Why does the wheels keep on rolling even if there is no object and sensor's sensitivity has been properly set
@antoniodias2776
@antoniodias2776 Год назад
Excelente projeto.
@skynet-robotics
@skynet-robotics Год назад
Thnx
@MartyrInside08
@MartyrInside08 Год назад
Does this circuit still work on the black board with white line? If it's not , should i change my Ir sensor position?
@skynet-robotics
@skynet-robotics Год назад
Yes it will work but you have to connect wire to NC port instade of NO on relay
@MartyrInside08
@MartyrInside08 Год назад
thanks a lot
@ArnavGuptaboy
@ArnavGuptaboy 4 месяца назад
Please make a video on it please
@deepavinod7038
@deepavinod7038 8 месяцев назад
Can i use the relay which you used in making" short circuit protection using relay" on your recent video
@skynet-robotics
@skynet-robotics 8 месяцев назад
Yes but u need some extra components like resister , diod etc
@Ratnesh411
@Ratnesh411 10 месяцев назад
Could u please share the link of products
@thegat4091
@thegat4091 Год назад
Can I use 9v battery instead?
@shivanshguptakhard3447
@shivanshguptakhard3447 6 месяцев назад
What is the rpm of motor plz reply
@ScienceOdyssey27
@ScienceOdyssey27 20 дней назад
@skynet-robotics sir the project is working but the motors speed is very fast and that y the robot is unable to turn and it goes out off track can you please help sir. i think that the motor is getting too much voltage(i am using 1 3.7 volt li-ion battery )should i use a resistor or a diode to limit the voltage
@skynet-robotics
@skynet-robotics 4 дня назад
Use speed controller
@user-sl3fx1ex7u
@user-sl3fx1ex7u 6 месяцев назад
Sir please send the buy link of IR sensor
@sol1303
@sol1303 7 месяцев назад
is the gray wire of gear motor connected to NO in relay, positive or negative?
@skynet-robotics
@skynet-robotics 7 месяцев назад
Positive
@skmwonder8660
@skmwonder8660 Месяц назад
Can i use 2 1.5v non rechargeable battery
@sknazrulislam1009
@sknazrulislam1009 11 месяцев назад
Sir my robot is not working. When I turn on the robot , the wheels are not rotating, and the green light on the 5v relay is glowing but it is dimming after few seconds and the in and out LED on the sensor also
@skynet-robotics
@skynet-robotics 11 месяцев назад
Which Battery u r using
@sknazrulislam1009
@sknazrulislam1009 11 месяцев назад
@@skynet-robotics 4v 1.5ah lead acid rechargable battery
@mrindianagamingyt2466
@mrindianagamingyt2466 4 месяца назад
Sir can uh give this project synopsis please
@user-qz6gc5mq9q
@user-qz6gc5mq9q 7 месяцев назад
Sir I have doubt can you please solve it Query : Our left side motor doesn't work but all wire are connected according as you have said in the video And some error sound is forming through it . So please solve our problem
@skynet-robotics
@skynet-robotics 7 месяцев назад
Send video on WhatsApp
@IamToxic_35
@IamToxic_35 Год назад
Sir I am from tamilnadu,Very very thank you sir it's 💯 percentage works tomorrow I submit my project at college
@skynet-robotics
@skynet-robotics Год назад
All the best
@thihamyatthu03
@thihamyatthu03 11 месяцев назад
Which v battery should we use at least sir? I am currently using 9V battery and the speed is too fast.
@skynet-robotics
@skynet-robotics 11 месяцев назад
7.4V Or use 100rpm motors
@chaithu_9993
@chaithu_9993 Год назад
Bro one wheel not working inee To submit tomorrow fasst
@bartist1159
@bartist1159 11 месяцев назад
Sir, can build it only 1 ir sensor
@skynet-robotics
@skynet-robotics 11 месяцев назад
No
@figapebriansyah6545
@figapebriansyah6545 7 месяцев назад
Thank's for your tutor sirr I'm from indonesia I wan't ask you, if we use arduino uno, how to make the wiring for the line follower, because i follow u for this wiring
@skynet-robotics
@skynet-robotics 7 месяцев назад
I hv made video for arduino line follower U can check on RU-vid Line follower robot skynet robotics
@jyotikamishra4829
@jyotikamishra4829 9 месяцев назад
Bro please reply fast, both my light on the sensor are turning on when where is nothing below the sensor
@skynet-robotics
@skynet-robotics 9 месяцев назад
Adjust the sensitivity Rotate potentiometer(blue color) using screw driver
@lokesh00219
@lokesh00219 9 месяцев назад
@@skynet-roboticsnow only one is turning on when i keep it on the ground
@loknathsaha9393
@loknathsaha9393 5 месяцев назад
Will it work if tape is white??
@CDTMOHIT
@CDTMOHIT 10 месяцев назад
which wire you use to connect relay to ir sensors
@skynet-robotics
@skynet-robotics 10 месяцев назад
Female to female
@skynet-robotics
@skynet-robotics 10 месяцев назад
Female to female
@CDTMOHIT
@CDTMOHIT 10 месяцев назад
thank you ❤️
@Adityatech119
@Adityatech119 Год назад
Sir what work does ac connector make
@skynet-robotics
@skynet-robotics Год назад
It's just connector You can give joint instead of using it
@Adityatech119
@Adityatech119 Год назад
@@skynet-robotics thanks brother
@manojkumarhalder8226
@manojkumarhalder8226 5 месяцев назад
I didn't get female to female for connecting ir sensors to relay then what should I do
@skynet-robotics
@skynet-robotics 5 месяцев назад
Solder wires
@lokesh00219
@lokesh00219 9 месяцев назад
One sensor is turning on when in the air and turning off when i keep it on the ground
@skynet-robotics
@skynet-robotics 9 месяцев назад
No it should be off when in air or black surface
@omshreerathore2192
@omshreerathore2192 Год назад
Sir l have created the robot but it is not working because of please tell
@skynet-robotics
@skynet-robotics Год назад
Adjust the sensitivity of sensor
@nottytuktuk9023
@nottytuktuk9023 11 месяцев назад
Wooden block can be of any size?
@skynet-robotics
@skynet-robotics 11 месяцев назад
Yes
@engrasad4913
@engrasad4913 Год назад
So when ir sensor detects black it means logic 0?
@skynet-robotics
@skynet-robotics Год назад
1
@engrasad4913
@engrasad4913 Год назад
@@skynet-robotics black line absorbs ir radiation
@zadaxegaming3160
@zadaxegaming3160 5 месяцев назад
Double Li - Ion battery se kuch short-circuit toh nahi ho na meri 7.4v ki hai , please reply sir
@skynet-robotics
@skynet-robotics 5 месяцев назад
Nhi hoga bas speed badhega
@prabhus3737
@prabhus3737 8 месяцев назад
Relay sound is coming but motor is not rotating... connectivity checked. whatcould be the reason.
@skynet-robotics
@skynet-robotics 8 месяцев назад
Which Battery used
@prabhus3737
@prabhus3737 8 месяцев назад
@@skynet-robotics 18650-1200 mah 3.7v... Also I have attached HW additional batter for testing... just sound is coming in relay and motor is not rotating
@Adityatech119
@Adityatech119 Год назад
My 4wd not following the line and not detecting edges
@skynet-robotics
@skynet-robotics Год назад
Adjust the sensitivity of sensor
@Adityatech119
@Adityatech119 Год назад
@@skynet-robotics I adjusted it does not working
@kushagranews5653
@kushagranews5653 11 месяцев назад
Please iski bhi video dale jaldi
@Pakrailz130
@Pakrailz130 4 месяца назад
line konse marker se draw krni h k ye usko sense kre
@skynet-robotics
@skynet-robotics 4 месяца назад
Electric wire Black tape
@mysterio17
@mysterio17 Год назад
Hello sir pls reply fast in the ac wire connector how to know which is positive and negative
@skynet-robotics
@skynet-robotics Год назад
This connector only connection purpose Identify by battery wire connection Written on battery holder
@mysterio17
@mysterio17 Год назад
@@skynet-robotics so i can put it in any ?
@skynet-robotics
@skynet-robotics Год назад
@@mysterio17 yes but make sure battery + terminal connected to vcc pin of realy and sensor -ve terminal of battery to Gnd pin of relay and sensor
@The_content_point
@The_content_point 7 месяцев назад
Is it necessary to use ac connector??
@skynet-robotics
@skynet-robotics 7 месяцев назад
No need It's use only for wire join
@iconictv234
@iconictv234 Год назад
Does it only follow black line sir plzz reply faster i have to submit it tommorow
@skynet-robotics
@skynet-robotics Год назад
Yes . But if u want to follow white line then it can . U need just change relay connection (very simple) In short it follow black line as well as white
@Rip_sam_blox
@Rip_sam_blox 2 месяца назад
Sir black tape konsi surface pr lagani h? Or mera project line follow nahi kr raha h kya reason ho sakta h?
@skynet-robotics
@skynet-robotics 2 месяца назад
Koi bhi white is best
@ABHINAVKRISHNA-ho5nn
@ABHINAVKRISHNA-ho5nn 8 месяцев назад
I bought 5v relay but not module can i make it using this relay
@skynet-robotics
@skynet-robotics 8 месяцев назад
Yes
@C_ai-chats
@C_ai-chats Год назад
Bhaiya isme jo aapne cap use kari he vo konsi cap he pls tell😢
@skynet-robotics
@skynet-robotics Год назад
Sanitizer ka cap use kiya hain aor usper Caster wheel lagaya
@zadaxegaming3160
@zadaxegaming3160 5 месяцев назад
Brother just tell ki ye black line ko follow kr rha h ya side wale white colour ko?
@skynet-robotics
@skynet-robotics 5 месяцев назад
Black
@kedarjadhav6489
@kedarjadhav6489 10 месяцев назад
What if i use 2 lithium ion battery with switch. Will it work? Plz reply fast.
@skynet-robotics
@skynet-robotics 10 месяцев назад
Yes
@kedarjadhav6489
@kedarjadhav6489 10 месяцев назад
Ok thank
@Sachinkumarjtfgi
@Sachinkumarjtfgi 6 месяцев назад
Sir please share the buy link of Ir sensor
@skynet-robotics
@skynet-robotics 6 месяцев назад
Ok
@pratikrochakanand8255
@pratikrochakanand8255 2 месяца назад
Bhai lithium battery hi jaruri hai ya double a aur triple a ke do tin battery use kar sakte hai
@pratikrochakanand8255
@pratikrochakanand8255 2 месяца назад
Jaldi bata
@MrMaruf-fn3co
@MrMaruf-fn3co Год назад
sir does it need programming or not
@skynet-robotics
@skynet-robotics Год назад
No
@haribhai2493
@haribhai2493 3 месяца назад
Sir the ir sensors are working perfectly but motor is not working
@skynet-robotics
@skynet-robotics 3 месяца назад
Send video on WhatsApp
@Editsportal
@Editsportal 6 месяцев назад
Sir, can we use 100 RPM gear motor in this project
@skynet-robotics
@skynet-robotics 6 месяцев назад
Yes
@Sachinkumarjtfgi
@Sachinkumarjtfgi 6 месяцев назад
Will this have any effect on speed?
@skynet-robotics
@skynet-robotics 6 месяцев назад
@@Sachinkumarjtfgi definitely speed depends on rpm of motor
@jenaissante26
@jenaissante26 6 месяцев назад
Please help. How can I put a switch to turn it on and off please? Thank you
@skynet-robotics
@skynet-robotics 6 месяцев назад
Cut red wire coming from battery and insert switch between the
@jenaissante26
@jenaissante26 6 месяцев назад
@@skynet-robotics between what?
@skynet-robotics
@skynet-robotics 6 месяцев назад
@@jenaissante26 red wire of battery which u hv cut
@skynet-robotics
@skynet-robotics 6 месяцев назад
919075800409 WhatsApp me I will send u diagram
@sitalikasingh8688
@sitalikasingh8688 Месяц назад
sir as demonstrated in the video i have used same materials but the car is not working the relay and the sensors are responding but motors are not responding what to do Please respond as fast as you can
@skynet-robotics
@skynet-robotics Месяц назад
Which battery u r using
@sitalikasingh8688
@sitalikasingh8688 Месяц назад
3.7 volt lithium battery
@sitalikasingh8688
@sitalikasingh8688 Месяц назад
please reply
@shefaly3543
@shefaly3543 8 месяцев назад
Sir this battery kitna mAh?? A Or me agar 1800 mAh use kora to work karega??
@skynet-robotics
@skynet-robotics 8 месяцев назад
Ha
@shefaly3543
@shefaly3543 8 месяцев назад
@@skynet-robotics sir laptop ka ceel use kar Sakta hu?? Sir forgive me for teasing you again😊
@Kalai-m4z
@Kalai-m4z 14 дней назад
But sir we use four motor in which should connect
@skynet-robotics
@skynet-robotics 12 дней назад
Rpm?
@bhawishya8455
@bhawishya8455 9 месяцев назад
I follow your video but the sensor are not working only getting hot plz help me
@skynet-robotics
@skynet-robotics 9 месяцев назад
Check connection polarity
@jobeenashaiju9504
@jobeenashaiju9504 Год назад
Super fantastic thanks you 🙏🏻
@skynet-robotics
@skynet-robotics Год назад
Most welcome 😊
@mysterio17
@mysterio17 Год назад
Hi sir i have done everything but it doesn't work pls reply i have to submit it tomorrow
@str1der-gaming954
@str1der-gaming954 Год назад
What would be the cost?
@skynet-robotics
@skynet-robotics Год назад
450/-
@reehangaming6117
@reehangaming6117 Год назад
Where is the switch sir?
@mysterio17
@mysterio17 Год назад
There is no switch you need to put in the battery to start
@kunalpawar7527
@kunalpawar7527 Год назад
Why did we use a 3.7V battery?
@skynet-robotics
@skynet-robotics Год назад
We are not using any voltage regulator . IR sensor need approximately 5V thats why Otherwise you can use two batteries 7.4 V
@Rip_sam_blox
@Rip_sam_blox 2 месяца назад
Sir black line kese banaya. Black tape h kya?
@skynet-robotics
@skynet-robotics 2 месяца назад
Wire tape
@Adityatech119
@Adityatech119 Год назад
Can we make it 4 wheel drive
@skynet-robotics
@skynet-robotics Год назад
Yes you can use
@Adityatech119
@Adityatech119 Год назад
@@skynet-robotics my 4wd robot is not detecting edges of table and it falls off
@pratikrochakanand8255
@pratikrochakanand8255 2 месяца назад
Ye dc motor aur normal battery se kam karega
@skynet-robotics
@skynet-robotics 2 месяца назад
Konsi wali 9v?
@pratikrochakanand8255
@pratikrochakanand8255 2 месяца назад
Wo hw company ka Jo aata hai
@pratikrochakanand8255
@pratikrochakanand8255 2 месяца назад
Lithium battery use karna jaruri hai
@mohitkanakam3152
@mohitkanakam3152 5 месяцев назад
It work comfortably?
@skynet-robotics
@skynet-robotics 5 месяцев назад
Yes👍
@kushagranews5653
@kushagranews5653 11 месяцев назад
Isko duble chanel rile se bana sakte ha
@skynet-robotics
@skynet-robotics 10 месяцев назад
Ha
@skynet-robotics
@skynet-robotics 10 месяцев назад
Easily bana sakte ho
@user-sl3fx1ex7u
@user-sl3fx1ex7u 6 месяцев назад
Sir can you please share the buy link of IR sensor
@skynet-robotics
@skynet-robotics 6 месяцев назад
Website under construction I will send u link in 2-3days please wait
@user-sl3fx1ex7u
@user-sl3fx1ex7u 6 месяцев назад
Sir please share the buy link of IR sensor
@skynet-robotics
@skynet-robotics 6 месяцев назад
@@user-sl3fx1ex7u 9075800409 WhatsApp me your requirements
@The_jingle_bell
@The_jingle_bell 11 месяцев назад
🎉🎉🎉
@user-zp1fr2sk6u
@user-zp1fr2sk6u 7 месяцев назад
Sir what other thing we can use in place of AC wire joint connector
@skynet-robotics
@skynet-robotics 7 месяцев назад
Yes 👍 That's connector use only for join of wires
@badboy-dj5vz
@badboy-dj5vz Год назад
hlo sir my all sensor is working but motor is not rotating plz help sir
@skynet-robotics
@skynet-robotics Год назад
send video on 9405276005
@shaalinishaalini7368
@shaalinishaalini7368 Год назад
Sir I send you the video sir please help me I have to submit my project on tomorrow sir
@user-sl3fx1ex7u
@user-sl3fx1ex7u 6 месяцев назад
Iski speed increase ho sakti hai kya bro?
@skynet-robotics
@skynet-robotics 6 месяцев назад
Ha Use 300 rpm motor or 7.4v battery
@JEE_ZXY
@JEE_ZXY 7 месяцев назад
Hello brother it is not working in sunlight plz give me any solution
@skynet-robotics
@skynet-robotics 7 месяцев назад
Use thermocol to cover IR sensor
@snvhighschool4816
@snvhighschool4816 6 месяцев назад
NOY GOOD
@skynet-robotics
@skynet-robotics 6 месяцев назад
👍
@nabilkable2597
@nabilkable2597 Год назад
sir please share the components list
@skynet-robotics
@skynet-robotics Год назад
2x Ir sensor 2x 5v single channel relay 2x 150 rpm gear motor 2x Li-ion 18650 battery 2x wheels Ac connector
@saqibmajeed5625
@saqibmajeed5625 Год назад
How will it work without coding
@skynet-robotics
@skynet-robotics Год назад
Ir sensor signal received by relay and relay activet motors
@princeg2229
@princeg2229 Год назад
Hello, can you explain how it stops when detecting an edge?
@skynet-robotics
@skynet-robotics Год назад
When ir sensor not detecting edge it gives 1 signal to relay And when relay recive signal as 1 (high) it disconnect motor connection
@SirvechMusavir689
@SirvechMusavir689 Год назад
@@skynet-robotics the relay often comes out and you need to stick it again and again.
@zadaxegaming3160
@zadaxegaming3160 5 месяцев назад
Mera robot black colour detect nhi kr rha kya karu 🥲
@user-if4yv6mx4q
@user-if4yv6mx4q 7 месяцев назад
My robot is not stopping when it get off from table
@skynet-robotics
@skynet-robotics 7 месяцев назад
Adjust sensitivity
@MC_Facts100
@MC_Facts100 7 месяцев назад
What are the components all
@skynet-robotics
@skynet-robotics 7 месяцев назад
ir sensor 5v single channel relay 18650 li-ion battery 150rpm gear motor
@uttamjangra9185
@uttamjangra9185 15 дней назад
Mobile ki black screen pe chal paye ga
@skynet-robotics
@skynet-robotics 15 дней назад
Nhi
@abdullahafridi.official5226
Kindly share there circuit diagram plz
@skynet-robotics
@skynet-robotics Год назад
Please wait today I will send
@user-hs9tv2mw4u
@user-hs9tv2mw4u 8 месяцев назад
We completed the project. but it won't stop on the black line? It's moving faster.Can you please help on this?
@skynet-robotics
@skynet-robotics 8 месяцев назад
Which battery u r using
@user-jj4bj5xp7z
@user-jj4bj5xp7z 8 месяцев назад
Lithium ion 3.7V
@skynet-robotics
@skynet-robotics 8 месяцев назад
@@user-jj4bj5xp7z rpm of motor?
@user-jj4bj5xp7z
@user-jj4bj5xp7z 8 месяцев назад
150
@user-jj4bj5xp7z
@user-jj4bj5xp7z 8 месяцев назад
It was working but suddenly one sensor started detecting black color though everything is at right place
@tamalpaul7446
@tamalpaul7446 2 месяца назад
Goo
@skynet-robotics
@skynet-robotics 2 месяца назад
👍
@shaalinishaalini7368
@shaalinishaalini7368 Год назад
Sir now two wheels rotating forward but it doesn't follow the line
@skynet-robotics
@skynet-robotics Год назад
9405276005 whatsApp me video
@zzzzzz2458
@zzzzzz2458 11 месяцев назад
sir can i use a diffrent rpm motor
@skynet-robotics
@skynet-robotics 11 месяцев назад
Yes But Use less than 150rpm
@MrMaruf-fn3co
@MrMaruf-fn3co Год назад
sir my robot sensor is working but not following the line
@skynet-robotics
@skynet-robotics Год назад
Adjust the sensitivity
@MrMaruf-fn3co
@MrMaruf-fn3co Год назад
@@skynet-robotics I changed but not happening
@skynet-robotics
@skynet-robotics Год назад
@@MrMaruf-fn3cosend video on whatsApp 9405276005
@MrMaruf-fn3co
@MrMaruf-fn3co Год назад
@@skynet-robotics i have sent
@gulrahana9158
@gulrahana9158 Год назад
Was it solved? What was the problem?
@kedarmahajan8941
@kedarmahajan8941 8 месяцев назад
What's the use of this?
@skynet-robotics
@skynet-robotics 8 месяцев назад
Manufacturing Industry
@ABHINAVKRISHNA-ho5nn
@ABHINAVKRISHNA-ho5nn 8 месяцев назад
Can I get the circuit diagram pls
@skynet-robotics
@skynet-robotics 8 месяцев назад
Given in video
@omshreerathore2192
@omshreerathore2192 8 месяцев назад
@@skynet-robotics sir how to make it
@mysterio17
@mysterio17 Год назад
I have tried everything can contact you some how
@skynet-robotics
@skynet-robotics Год назад
Whtsapp 9405276005
@itsrahul68
@itsrahul68 Год назад
Sir Mera to single batrry se chal hi nahi Raha hai or jab me 2 batrry series me jod kar chalata hu chal to chal jata hai Lekin speed bhot jada hai speed ko kaise Kam Karu sir please jaldi bata do 15 Tarik ko jama karvana hai school me 😢😢
@skynet-robotics
@skynet-robotics Год назад
Use 100rpm motor Or Connect motor connection to sigal battery and sensor connection to Double battery
@itsrahul68
@itsrahul68 Год назад
@@skynet-robotics sir 100 rpm moter ka istemal hi Kiya hai
@chaithu_9993
@chaithu_9993 Год назад
Bro reply fast other wise iwill disqalfy from science fair
@skynet-robotics
@skynet-robotics Год назад
Check connection digram
@Sketchfunartist
@Sketchfunartist 5 месяцев назад
Sir black line kaise banaye
@skynet-robotics
@skynet-robotics 5 месяцев назад
Electric wire tape
@Sketchfunartist
@Sketchfunartist 5 месяцев назад
Thanks sir
@Sketchfunartist
@Sketchfunartist 5 месяцев назад
Sir aap Arduino human following robot bataeya a
@Sketchfunartist
@Sketchfunartist 5 месяцев назад
Sir 2 neon battary use kar sakte hai kya kuch nahi hoga n
@Sketchfunartist
@Sketchfunartist 5 месяцев назад
Sir IR sensor nahi chal raha
@zadaxegaming3160
@zadaxegaming3160 5 месяцев назад
Castor wheel kahi se nhi mil rha aapko kha se Mila 😢
@badboy-dj5vz
@badboy-dj5vz Год назад
1 have send vidio plz sir help mee plz sir check it 1 time plz sirr
@King__vardhan
@King__vardhan 5 месяцев назад
What is its coding
@skynet-robotics
@skynet-robotics 5 месяцев назад
No coding required
@moonknight6994
@moonknight6994 Год назад
How to decrease the speed of motors
@skynet-robotics
@skynet-robotics Год назад
Use 100-150 rpm motors
@moonknight6994
@moonknight6994 Год назад
@@skynet-robotics i used them but the speed is higher than yours
@skynet-robotics
@skynet-robotics Год назад
@@moonknight6994 how many batteries you r using
@moonknight6994
@moonknight6994 Год назад
@@skynet-robotics one
@moonknight6994
@moonknight6994 Год назад
Lithium ion battery
@rashidaazeez350
@rashidaazeez350 6 месяцев назад
hai,my robot is so fast it cant sense the black line .what to do
@skynet-robotics
@skynet-robotics 6 месяцев назад
Use 100rpm motor
@AHalo2019
@AHalo2019 Год назад
Cost kya hoga project me
@skynet-robotics
@skynet-robotics Год назад
1800/-
@amitsah9674
@amitsah9674 Год назад
Sir my robot is not following the line
@skynet-robotics
@skynet-robotics Год назад
Sensor r working properly?
Далее
Breadboarding tips
20:16
Просмотров 425 тыс.
I made a SUPER FAST Line Follower Robot Using PID!
10:02
🎙СТРИМ на 4 МИЛЛИОНА🍋
3:12:45
Просмотров 1,3 млн
Викторина от МАМЫ 🆘 | WICSUR #shorts
00:58
МЕГА ФОКУС С ЧИПСАМИ
00:42
Просмотров 283 тыс.
Line Follower Robot using Arduino🔥
7:01
Просмотров 509 тыс.
The Fastest Maze-Solving Competition On Earth
25:22
Просмотров 19 млн
How to make a Human Following Robot Without Arduino
4:33
How To Make Line Follower Robot      Step by Step
7:33
Просмотров 174 тыс.
Ноутбук за 20\40\60 тысяч рублей
42:36