Liquid Hydrogen and Oxygen Tutorial | Oxygen Not Included

Просмотров 46 тыс.

% 2 183

A tutorial on building a closed system for liquid hydrogen and liquid oxygen production.
Opening music: Summer of 1984 by RKVC
End Screen music: When Johnny Comes Marching Home by Cooper Cannell
---
Patreon: www.patreon.com/EchoRidgeGaming
RU-vid Membership: ru-vid.comjoin
Twitter: EchoRidgeGaming
---
Echo’s Gear - Stuff I use and would recommend (Amazon Affiliate Links)
Arozzi Arena Ultrawide Gaming Desk - amzn.to/3IhbKIM
Corsair K95 Platinum XT Keyboard - amzn.to/3ohY8VM
Corsair Vengeance RGB Pro 32GB (2x16GB) Ram - amzn.to/2ZVdypE
Blue Yeti USB Mic - amzn.to/3xU4RrX
Synology 2 Bay NAS - amzn.to/3It70jw
LaMetric Clock and Sub Counter - amzn.to/3xQ92VM
Logitech HD Pro Webcam C920 - amzn.to/2ZQtedB
EVEO 17-35” Dual Monitor Stand - amzn.to/3dfItjq
Mobile Computer Tower Stand - amzn.to/3lwTtxk
InnoGear Microphone Arm Stand - amzn.to/3piGY9O
Vertical QI Fast Wireless Charger - amzn.to/3rwRmgX
Disclaimer: These are Amazon Affiliate links, if you make a purchase using them, I will earn a small commission at no additional cost to you.

Игры

Опубликовано:

16 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@ladyruff4333 2 года назад

You make it look so simple! Absolutely loved it!

@mazfars 2 года назад

This tutorial was on my wish list. Thank you for making it easy to replicate without adding anything complicated.

@kasuha 2 года назад

Regarding solid hydrogen forming in your hydrogen freezer part: there's a way to regulate temperature of the coolant down to 0.1 C. Just put liquid storage behind the aquatuner and regulate for temperature of the liquid going out of it. It does not have to be full, a few hundred kg of supercoolant in it is enough, that way the 14 C of cooling by the aquatuner gets spread over whole contents of the storage and causes only slight change in output temperature. May be only necessary for perfectionists who don't like messy designs, though :)

@kennyholmes5196 2 месяца назад

Alternatively, cool it down to a higher-than-needed temperature that is close to the target temperature, and then once the cooling's evened out that first time, set it down to the actual target temperature.

@dyanpanda7829 Год назад

Great tutorial! thanks! One suggestion: Since you built your fuel system in space, you dont actually need the layer of polluted water at all. Just put 20-50 kilos/tile of water, and seal it off. Space will keep any gas out while you work on it. The Aquatuner can then make only steam and no dirt :)

@ivankulakov7509 2 года назад

The second type of water in steam room was unnecessary. Usually it's done to push out any gases that are around, but since we're in space simply one layer of about 100kg of clean water would do the thing.

@EchoRidgeGaming 2 года назад

Wow... 100% correct. Muscle memory I suppose. Thanks for the comment.

@scarletpathcat 2 года назад

@@EchoRidgeGaming The jetpacks let out a little CO2, so probably still a good habit!

@queenkalero 2 года назад

I'm sure I'll end up watching this a few times before it clicks as I'm not quite there yet. Thanks for taking the time to break these things down. Sometimes Francis John is just over my head lol

@snackjunkie9367 2 года назад

You can get a much more stable coolant temperature if you output the aquatuner directly into a liquid reservoir with a couple hundred kilos in it and put your thermo sensor on the output of the liquid reservoir. Then your coolant loop fluctuates by only a few degrees above and below your target temperature.

@Babyjoker2222 11 месяцев назад

Does the reservoir go inside or outside the structure? I already have it built they way he did so im not sure where to put it.

@snackjunkie9367 11 месяцев назад

@@Babyjoker2222 it needs to be outside the steam room so it doesn't exchange heat with it

@Babyjoker2222 11 месяцев назад

@@snackjunkie9367 Does the automation need to be connected to the reservoir and the auquatuner or just the reservoir?

@Babyjoker2222 11 месяцев назад

Seems like just to the reservoir the aquatuner just keeps running until max causing the hydrogen to freeze, and then when i connected it it still continued to run.

@snackjunkie9367 11 месяцев назад

@@Babyjoker2222 none of the above. You still connect the automation to the aquatuner. You're just measuring the temperature from the reservoir output.

@danny98432 7 месяцев назад

exactly what i was looking for. thanks!

@NoMusiciansInMusicAnymore 2 года назад

Great set up! I haven't done Liquid H2 since the spaced out DLC haha, this has me keen to give it another crack!

@slapman7646 4 месяца назад

OVERLAYS AT THE BEGINNINGS NG OF THE VIDEO! Awesome.

@jannefock9337 2 года назад

The difference between insulated pipes and regular pioes is how thermal conductivity is calculated. With regular pipes you calculate the average of the two items. So it would be half of liquid hydrogen. Same with heat feom outside the pipe(if you didnt stop the loops when rockets leave or come back). With insulated pipes the lower thermal conductivity is used. So with insulated pipes made with insulation thermal conductivity is 0, with ceramic its really small

@MrPlacka71 Год назад

great tutorial mate!

@EchoRidgeGaming Год назад

Thank you.

@mattf4239 2 года назад

Love the actual tank part, my preference for cooling the steam turbines is a powerless loop of hydrogen in a gas pip looping through window tiles along one side of the oxygen tank and behind the turbines massive thermal mass to hold the temp and it doesn't effect the cooling of the oxygen at any point either, excellent work though. Have you tried the trick with piping through bridges with 1 pipe segment between them to save on pipe costs?

@jeivalien7253 Год назад

This is amazing, I feel like the creation of liquid hydrogen and liquid oxygen is the final boss of the game, you need to apply everything you've learn to make such contraption work.

@AkouBudo 2 года назад

Great video, love your content, sub smashed

@EchoRidgeGaming 2 года назад

Thanks and welcome to the community!

@MrRiccochet Год назад

Like meany have pointed out using a buffer tank helps evening out the temperature and you don't get spikes in it. It was also pointed out that normal pipes of insulation will change temperature as it is an avarage between the thermal conductivity of the pipe and liquid. Think Francis john explained the math it in one of his videos. Areas in space you don't get rocket exhaust to (insulated wall on the side of the rocket) you can use radiant pipes in, as they instantly cool down as most have a low specific heat capacity.

@mowinckel10 8 месяцев назад

A trick I used, was to pre-cool the hydrogen to -255 via the gas version of the aquatuner. I also had a full tanks of super-coolant after the aquatuner and used the thermo sensor on its exit. The more super-coolant the more stable it is. I got the hydrogen to be -261.5 Then, whenever I had both enough of it to fill the chamber, AND it was colder than -261, it was pumped through the pipe system fueling the rockets and was then lead back to the hydrogen chamber. Even when no rocket needed fuel. That cooled all the pipes to -260 too, so the pipes no longer sucked chill out of it. That way, I could run it longer and longer, even before getting insulation.

@maxstr 4 месяца назад

They made supercoolant way harder to make. Now I have to go find a graphite asteroid and ship it over, along with sulfer and aluminum. It's definitely late game stuff

@DokterRhezaGaming Год назад

20:18 i realized this since the beginning and i was that positive thinking that you might be have a good explanation with that, but it's not. and it's hilarious.

@randomsandwichian Год назад

Just recently been hooked on this game, so just wanted to know what material is best suited for high heat capacity buildings, tiles, liquid and gas conduits? I've only basically been using copper, granite, mafic and igneous so far.

@larrylindgren9484 2 года назад

Hydrogen at -254 you get less of it freezing. Still turns in the liquid. Just keeps it from freezing up.

@theanthillfromknow.theanop3960 2 года назад

Chekking in again. Oh did stil not tested the food whit the bufs always late ad home. Greatings

@behbeh2 2 года назад

Hey ERG! A little noob over here but with the SPOM wouldnt building airflow tiles vent the gases into space? As you can't build drywalls behind it.

@ryanm9318 2 года назад

I am working on automation so when the rocket lands it turns on the pumps. Then when over flow is detected it turns the pumps back off. Nice since they added the automation sensors on the landing pad.

@EchoRidgeGaming 2 года назад

Great idea.

@agentx2338 Год назад

the liquid pipes are getting cold damage from output thermo aqatuner

@TimTimYoutube 2 года назад

Is aluminum still the only radiant pipes that will work?

@sha46327 2 года назад

Bookmarked this for later (at which point I'll watch it all of the way through again, bc screw you youtube algorithm!). Thank you!! ... I'm embarrassed to admit, but despite hundreds of hours in ONI, my dupes have yet to enter space. 🤦‍♀️ I really need to stop playing it like a colony survival and get them out there exploring! lol Tyfs! Hope you're having a good week, Echo!

@ptilrem 2 года назад

I feel you brother. Almost 300 hours for me, and not a single dupe in space yet. And also, most of my colonies died out on me.

@grezamisoit Год назад

Hello! Why to use isolated pipes in space ? There is no loose of heat as there is nothing in the environement. Isn't it ?

@Babyjoker2222 11 месяцев назад

How much steam / water do you need per tile for this? Also what are the atmo sensors in the bottom room set to? I made two of them, 1 instantly stabilized and the 2nd is no where near stabilizing after many cycles.

@Purrfect_Werecat Год назад

I get the need for the waste into space but I can't help seeing that and wanting to store a bunch of it for later just in case because I hoard resources in all games lol. I wonder if it would be doable though to have a usable stash of o2 or H via the overflows that you could use elsewhere or if it would mess something up.

@Purrfect_Werecat Год назад

then again I can't even make it to/through mid game legit so maybe I should start there first lol

@Archeos92 2 года назад

This will come in handy soon! Im going to start playing on a better computer that will actually manage several planteiods and space travel. My current does not. One thing I was wondering tho, would you consider using the excess hydrogen in a generator instead of venting it? It could feed some energy back to the net.

@EchoRidgeGaming 2 года назад

You definitely could do this, but, by the time it is running fully, there will not be any excess hydrogen.

@ptilrem 2 года назад

Ever thought of the mod Piped Output? That mod saves a lot of space and time. No need for gas-pumps for taking care of the gas that's being output from machinery.

@EchoRidgeGaming 2 года назад

I try to play the game the way the developers intended for the most part. No shame on others who don't, just tends to be how I play games. I have a couple of mods but nothing that changes core functionality.

@ptilrem 2 года назад

@@EchoRidgeGaming And full respect to that. I just find that mod very useful.

@liamt9976 2 года назад

good video, gotta say though, if you’re building a liquid oxygen/ hydrogen setup you probably know how an electrolyser works 😁

@EchoRidgeGaming 2 года назад

Fair point, I just hate assuming.

@Dude29 11 месяцев назад

What is a full Rodriguez?

@potatopotpie6108 8 месяцев назад

whats the atmo sensor settings at?

@SkaiCloud562 2 года назад

Echo i like your idea of the polluted water and clean water aquatuner setup but I'm worried about the polluted oxygen of gasing when I sealed everything up furthermore, doesn't polluted water leave polluted dirt behind once the water evaporate?

@EchoRidgeGaming 2 года назад

Won't off gas because there is enough regular water that turns to steam first, which overpressurizes the room. Yes, it will leave some dirt around.

@SkaiCloud562 2 года назад

@@EchoRidgeGaming"leaving polluted dirt behind" 😵 that don't make you twitch? 😆 why not crude oil or petroleum?

@IamCoalfoot Год назад

You _say_ that insulated pipes inside insulated tiles prevent heat transfer, but for some reason my l.ox build just seems to transfer surprising amounts between the insulated pipes and the l.ox, and running them through insulated tiles just made it worse; five tiles would see the l.ox jump nearly one hundred degrees. Rather annoying. =_=

@blazeraz7666 Месяц назад

But aren't you in vacuum? what are the pipes gonna exhance heat with and they need to be made with ceramic and stuff

@jpopperman9369 3 месяца назад

I don’t think you needed to break into the hydrogen side at all, with the disconnect tool you could have disconnected the pipe and built one more then connected them again

@megamiana-spaceforcecomman705 Год назад

Watfching anyone vent gas into space hurts me a little inside. I always use singularity tanks but I know a lot of people see that as an exploit.

@rafaelbiriba 2 года назад

There is a typo on my name at the end :)

@EchoRidgeGaming 2 года назад

I fixed it. So sorry about that!

@rafaelbiriba 2 года назад

@@EchoRidgeGaming zero problems :) keep doing the good job!

@benitocamela6017 2 года назад

Watching this videos and how easy you describe everything but ho hard it actually is in real game time... Make me think you are Ellon Musk's lost brother lol!!

@EchoRidgeGaming 2 года назад

Coming home for the holidays: Moma Musk: "So boys, what have you accomplished this year?" Elon: "I invented a rocket that could land itself vertically and took it to space." Echo: "I made a tutorial video for a game that is set in space." Haha.

@joelernst8815 2 года назад

Hey there, can we have a save game of this game? Its extremly irritating having to keep everything in mind and doing it copy by on the screen. There are blueprint mods that make copying possible.

@EchoRidgeGaming 2 года назад

We share save files in the Discord. Right now only current playthroughs are uploaded (we started the discord recently). Some save files are too large to upload because we are not boosted as of yet.

@dzuchun Год назад

-271.2°C is like -0.5K. say hi to themodynamics.

@HenryLoenwind Год назад

No. It's 1.95K. I can understand that not everyone can remember -273.15°C, but it's so easy to look up nowadays. Most web browsers directly answer unit conversions without even having to press enter.