Little Changes Make A Big Difference For The Mini Jeeps 

Seeing one lil jeep winching up another lil jeep over that hump has to be one of the most ridiculous things I've ever seen. LOVED it! 😂

Always love getting notified about some good old MisAdventures!!

I am really enjoying this mini jeep series. I am sure you guys will get everything figured out.

The lab coat/white board lesson was the best part!

Trevor has a gas leak. The float maybe a little high. Great to see you two. You both seem so much happier.

I am so glad that you guys eventually made it through the funnel. Matt's offroad recovery said that one can be a doozy!

Things to try, smaller gear up front with a bigger gear at the axle will bring low end power. Or a bigger carb, with opening up the intake on the head to match the bigger carb and open up the exhaust will bring a huge different feel of the power. good luck great show

You guys are great entertainment for the 8 year old within me 👍🏻👍🏻 Im impressed by the wheel spin.. you need front wheel drive too 😂😂

Need to put a wheelie wheel on the back to keep from going over backwards! The smaller sprocket helped.

I know Trevor must have drawn that owl. It looks just like him! Love watching you guys mess around with these mini jeeps. Makes me smile every time.

Install a HUGE oil cooler. Probably somewhat solve the issue. And if u want to get fancy, install a thermostatic fan switch and electric fan on the cooler!

If you have the time and money, that is a ton of fun. LOVE seeing your videos.

There needs to be a mini wrecker build for mini recoveries. Should be a fleet of mini crawlers, bloggers, drag, drift, mini lowboys.

I am calling it now This channel is gonna make it big

You guys are awesome! Every video I'm jealous that I'm not there with you guys goofin' around and having fun :) Maybe let Eric drive one of those jeeps next time, perhaps he'll realize the golden nugget wasn't so bad after all :D

This video of how much upgrading stock equipment is really fun. There is always a better part out there but at what point can you tell the difference? Seeing how much things improved here was a good time. If that is the LAB part of your channel name... I like it.

I guess I'm just like Tucker. "here we go" then Tucker and I both started laughing simultaneously. You guys are absolutely the best entertainment out there! Thanks for taking us along!

Tucker and Trevor... This looks like a lot of fun!

It's always good to measure the sketchiness of what you're doing. I think you need to drop an LS into one of those things....

I deeply appreciate the mad mad behind the scenes joke about Morr. Mini jeeps vs the worlds largest off-road wrecker. The exquisite tongue in cheek sarcasm is one of the most interesting and intellectual things I have ever witnessed.lol

Holy cow! It's Trevor from MORR! One of the best folks that was on that crew! Subscribed.

This channel is one of my new top favorites. I’m not a fan of channels with scrips or plan sayings or whatever. I know channels have to have plans on videos and purchase the products then be organized but there is nothing better than “mad lipping” and going with the flow of the series. You guys missing from Matt’s off-road was a big change and not sure in the best way? I love that channel but I love the mixup of the things you guys bring. Keep it going!!!!!

like the bus camper home outbreak is there like a mini jeep adventures outbreak recently? they keep popping up on my feed ever since I discovered this channel and c90adventures 🤣🤣🤣🤣🤣

I figured changing sprockets would be your best bet. Of course, when I mentioned it, I was thinking front and back. How's the drive train set up on those things? I take it after watching this video the clutch is on engine crankshaft, kind of like a chainsaw. But then what, chain drive to gearbox then to rear end or is the gearbox part of the rear end? When I mentioned experimenting with belts on the earlier video, I was picturing more of a snowmobile setup.

You guys are a riot! I've still got that OEM service manual for a '99 XJ I'll send you Trevor!

Many many years ago, trials bikes were mostly 250cc Bultacos, and much heavier than what we think of as Trials bikes nowadays. Then in 1972 Honda produced the TL125, which most of us pretty much laughed at. The first time I saw one, I was waiting for my turn to climb a long steep section, and a large lad turned up on a TL125. We were 100% certain that he had no chance, but he crawled up that hill going slow so as not to lose traction, and shocked the bejezus out of us. Tucker climbing the slope in the modified Jeep reminded me of that day.

What you guys are proving to me is it may be better to build my own off-road go-kart. The only thing I won't have is the cool Jeep body.

Keep ‘em coming! Great videos! Enjoying them all!

3rd video in a row I'm saying just fit a Hi/LOW CT110 motor. You will not regret it with on and offroad usability. Plus they are 4 speed. Also use an intake manifold adapter plate, can put the manifold at any angle then. I build custom race and adventure 125cc bikes for a living

Love the content guys. Just good, simple interesting fun

This channel reminds me of Thanksgiving, lots of turkeys but it tastes so good! Great video guys!

How did I not know this channel existed? Awesome, guys! I loved your lecture on knowledge and power and owls! Subscribed, fo sho! Great branding too... _someone_ has a design eye...

Have you guys done anything to take the rattle out of the body? My x-pro sounds terrible at top speed….everything vibrates like crazy. Thanks for the other tips!

By the time you're finished with them, you could have bought full size Jeeps. But where's the fun in that?😅

This series are awsome. Please go full send and give them a real offroad rebuild. Would be awsome to see you guys do that.

man you guys are fun to watch all i ask is that you dont break your necks while hooning around out there

im loving your content!! you guys just do what makes you happy and it is brilliant to see the smiles on your faces when you do stuff

I was waiting for bubbles to come out of the Jeep 😂😂

Tucker's a huge dude for one of these jeeps, but Trevor and George aren't far behind. This is a good series, keep it up.

If I drink enough Big Mac shakes I hope to grow up just like you guys. Yeah. I want a mini Jeep.

Well, atleast you are on the right track to learning what RORY DOES ON THE TRAIL AND IN THE GARAGE

Those things look like a lot of fun.

Trevor, Barnes& Noble needs to jump in on this project.

This whole mini jeep stuff is just wonderful crazy fun.

I swapped out the 14T to a 12T today. I used the original sprocket retainer instead of using the one that came with the sprocket. Still touches the chain a little but holy smoke did that change it. It can climb hills with much left effort. Going to 20s is my next move. I know I will loose a little of that bottom end we got today but there is plenty to spare. Thank you for doing this series you guys!

Love your channel. You guys are a riot. Can't wait for the next one. 😂😂😂😂

You guys Rock!!! Keep up the great content.

I have a Masimo tsc brand mini Jeep. Who makes a lift kit for them ? They set to low in the front even with the shocks turned up.

This looks like the most fun you can have with your pants on

So what shocks are everyone using to replace the stiff stock ones?

This and Ben's (B&M Garage) are among our favorite channels.

....as always guys, riveting information thrown in with a whole wad of entertainment. Well done.....

Clutch part link, thank you in advance

You guys are making these things awesome. I cannot wait to test them out the next time I'm down there.

Where did you purchase the new clutch?

The amount of math and computer simulations you guys must be doing behind the scenes is mind-boggling! And I know the whiteboard presentations done by Trevor, although concise, were most likely toned down for those like me with limited technical skills.😊 I really enjoy your videos! One thing I might point out is that when those Jeeps stop moving with the engines still revving, the clutch is likely slipping and heating rapidly. It would be really good if you could switch over a manual clutch so it could be controlled better.

I might do that gear change on ours. We never run it full speed anyways and would rather be able to cross a ditch

You guys are an absolute riot. Quickly becoming my favorite channel!

More misadventures…yay!

Funny stuff, Trevor, Tucker love it!

Great video, bro. Had a great time watching y'all sort everything out!

"...i saw a RU-vid video...im an expert.."😁i can relate!! i appreciate the diagram...the officious white coat was a clear indication of your expertise.... 😆🤣😅😁😀😂

You think one of these would pull a pull behind grass cutter on level ground?? I'm looking at one of these as a cheap mower replacement

Bigger muffler and pipe makes a big difference!! 😊😊 I just did it on my 125

Again, the Duck Dynasty dudes of the desert! I get some of the best laughs from you guys!! Thanx for the giggles.

you need to watch luke fugate improving my mini jeep and more mini jeep mods

I recognize these guys. Good for you!!

Standard these are good for kids, 26mm mikuni and a 38mm bore exhaust from header get them gases out there pulling 45to 50

that loon that drove one to moab probably can give some tips on improving them things. i'd only be using one of them on relatively improved roads, so i'd need a proper diff, and a more flexible rear suspension. the swingarm assembly under my weight would get destroyed, so, ball joints at the end of independent arms and a proper panhard rod.

It's about time for a new mini-jeep-adventure, PLEASE !!!

"...to see if they _still_ can't do, what they can't do now, or whether they _can_ do what they can't do now, or whether they can _can_ do what they can do now." Yes, you should do that. I think? Or maybe not. I honestly have no idea what you said lol

Glad I watched your videos this morning it made me laugh and feel better. Now to get this Day started

😂this channel is awesome! Can’t wait to see the mini Jeeps in more episodes

Sorry to hear about your recent operation Trevor. My sister had my brother-in-law "fixed" and his voice has gone up two octaves ever since!

Can you text one to see if it would pull a harrow/drag?

Tucker . . . what in the world was that helmet in the outro? 🤣🤣 I NEED ONE!

I've had riding lawn mowers that were faster! 😂 Thanks Guys!

I liked the logic about the clutch. Not having the knowledge absolutely equals not having the power.

Is there a way to adjust the clutch on these mini jeeps so they don't slip so easily?

U need to adjust what u thought was clutch bolt hit the screw in middle turn it out then turn it back in till it just engage pressure the more u turn the center screw the more the clutch will slip. That will work if it hard shift u just need little more tension as clutch wares u back that center screw out . Ive done things with that motor u never could imagine and any time u take the exhaust open they will run lean factory are lean and if u get clutch right it should walk right up them hills I use to take 70 3 wheeler on Hills that were way stepper but I wish I was there to show u the simple and cheap way to make them run better.i wish I had funds to own one I would love to stretch 8-10 inch right at the center door area so u could mould new rocker panel to connect the body together kinda like diamond plat e lower rocker guard and it still look ok because of no door also small roll bar with 1inch wider hub or axel maybe bigger cam or bigger bore cylinder lot them copy motors are interchangeable and u can do upgrades from a factory big cubes motor because there's so many Chinese copy's old Honda with bearings in cam area and 4 valve head lit little things old Honda motor back when I was building those motors I swap them on every i could riding tractors go karts even use bed frame L channel all bolt together with lawnmower reàr axel and front before I could weld things I was the kid if it had motor I would ride it or make it propelled something.

You guys are having way too much fun!!!! 😂 That was awesome!!!!!

Try doing that climb in reverse.

I saw in one of the RU-vid channels a guy put a 440cc engine. They beefed up the frame and did a lot of modifications to handle the new engine. This would be a different challenge for you. Food for thought.😂

Haha.... Every time I see those dang jeeps for sale online, I think how ridiculous it would be for me to buy one. Having said that, Y'all really make me want one now.....bahahahahaha!! Keep having fun!!

Met you guys at SEMA this year. Keep up the great videos. The mini jeeps are awesome!

I had a Yamaha blaster 200cc two stroke and I only weigh 170 lbs and that quad was weak . Especially one you get into the dunes. You two should consider putting 650cc vtwin's in those jeaps.

i like the whiteboard. i like the whiteboard slaps. that was hilarious

So we are not talking about the fluids gushing out of Tucker's jeep?! Also, when are you converting to 4 wheel drive?

for oil, the best you can use is rotella T4 oil. yes the desiel stuff. it will allow yourt motor to run so much better and smoother.

This channel should be at 100k subs. Great synergy!!!

You look like diesel Dave so much. Love the series.

You guys are having way too much fun!

HERE'S A CRAZY THOUGHT IDEA I HAD, JUST SIMPLY SWAP FROM A ATV ENGINE, TRANSMISSION, PARTS, TIRES ONTO THOSE MINITURE JEEP

You guys crack me up, you lot are funnier than a fight in a wheel barrow. From kiwi land.

Maybe a wheelie bar… (Wonder if you could mount those Jeep bodies on a 4x4, 4wheelers?) Use the four wheeler seat, and handlebars… I wonder what that would be like?🤔

You got some Roll, Pitch, AND Yaw on that winch!

I just got my jeep for Christmas. My only concern is where do I find parts like you do in your videos.

have you looked in zorst for restrictor ring

Do you guys all get different brand or different models I noticed some little differences and didn’t know if there is one that’s better? Are they all the exact same engine?

this is awesome you know the big upgrade would be 4x4 great video keep them coming