LM3914 vs LM3915 vs LM3916 - What are the differences?

Подписаться 61 тыс.

Просмотров 102 тыс.

50% 1

■ JLCPCB Prototype for $2(Any Color): jlcpcb.com
In this video, the three ICs (LM3914 - LM3915 - LM3916) are compared.. and what will be the best to realize a Vu-Meter?
The main differences between these ICs are:
• LM3914 is a linear display.
• LM3915 is a 3db increments logarithmic display.
• LM3916 is a VU-Meter display. (-20 to +3db)
And from this we deduce that:
The LM3914 is typically used to create a voltage display using 10 LEDs, while the LM3915 and LM3916 are typically used to display audio signal using 10 LEDs.. And now that I've explained everything to you, SUBSCRIBE =)
After trying the excellent service offered by JLCPCB I recommend it, the quality of the PCB is high, customer service is always available and professional, the time of realization is short and the delivery of PCBs is by express courier. JLCPCB is a great place to get hight quality custom circuit boards at an extremely low price, you can buy 5 PCB Boards (Any Color) for 2$ !!!
More About JLCPCB: support.jlcpcb.com/collection...
Components:
- 1x LM3914
- 1x LM3915
- 1x LM3916
- 4x DIP 18 Pin
- 30x LEDs 5mm
- 1x LED 3mm
- 1x 1KΩ Resistor
- 6x 2.7KΩ Resistors
- 3x 100KΩ Resistor
- 3x 1uF Electrolytic Capacitor
- 1x220 uF Electrolytic Capacitor
- 3x 1N4007 Diode
- 2x Pin for Dot/Bar Mode
- 3x Pin for VCC - GND - SIG
- PCB: (Ready for jlcpcb.com): bit.ly/33Z8MUi
*Don't use my PCB for profit or sponsored videos.
This circuit must be powered with 9V DC, below I leave the references to view: the electronic circuit diagram, the PCB and the Gerber file to be uploaded directly on the JLCPCB website.
- Circuit Diagram: 0:35
*You can see the complete procedure to upload the Gerber file on jlcpcb.com in the video from 2:00
**JLCPCB have a Technical Support for exporting Gerber files from many software at this link: support.jlcpcb.com/category/2...
For any other questions you can ask me for explanations in the video comments:)
Music: by Vlog No Copyright Music
- Tide (PCB Assembly)
- Nostalgia Tobu (Music Test)
■▬▬▬▬▬ LINK & Support ▬▬▬▬▬■
Watch another video =)
● Halloween 2019 Ghost: • DIY Halloween Ghost (3...
● Water Level indicator: • LED Water Level indica...
● Police Light: • Police Light DIY with ...
● Electric Field Detector: • How to make an Electro...
● Vu-Meter Stereo: • Vu-Meter Stereo -20 +3...
● Traffic Light: • Make your own Traffic ...
● Vu-Meter 40 LED: • Vu-Meter 40 LED on PCB...
● Automatic LED Light: • Automatic LED Light ( ...
● Voltage Detector: • AC Voltage Detector DI...
● Music LED with TIP31: • Make Music LED with TI...
● NE555 Signal Generator: • NE555 Signal Generator...
Follow me
- RU-vid: / stefano91ste
- Instagram: / stefano91ste
- Pinterest: www.pinterest.it/Stefano91ste
■ If you'd like to support the channel: Like, Subscribe, Comment and Share my Videos :)
■ Do you want to Make a PCB?
Look this: • Vu-Meter Stereo -20 +3...
WARNING: This video is only for demonstration. I don't take any responsibility for damage to things, people and animals.
#LM3914 #LM3915 #LM3916

Наука

Опубликовано:

29 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 150

@manoharmanu1460 3 года назад

Your videos are bliss for electronics hobbyist's like me . Such nice work with pcb designing and execution.

@Stefano91ste 3 года назад

Thanks so much! I'm happy when my work is appreciated :)

@kabeer9744 2 года назад

Electronic hobbyist' like you 😀

@rodrigonishikiori9747 3 года назад

Great comparisson, thanks for sharing.

@Stefano91ste 3 года назад

Thanks for appreciating my work on RU-vid :)

@theplaidgamer1653 4 года назад

Keep up the good work!!

@Stefano91ste 4 года назад

Thank you :)

@electronic7979 4 года назад

Excellent project 👍

@Stefano91ste 4 года назад

Thank you :)

@soerensauber 3 месяца назад

Hey @Stefano91ste , vertreibst Du auch die Leiterplatte? Wegen einer benötigen wollte ich keinen Auftrag bei JLCPCB auslösen.

@kbeceamibala 4 года назад

I love your videos man, you are one of the few yt that makes vumeter videos(sorry for my bad english), btw can you make a simple led spectrum analyzer?9with the lm3915?

@Stefano91ste 4 года назад

Hi, thank you :) It is a project I would like to realize, in the future it will come!

@alikhalili738 2 года назад

perfect.thank you

@gurwindersingh-te5bl 2 месяца назад

How to purchase this vu pc board complete kit

@danialfikri8244 4 года назад

can i use audio jack as an input

@bradricketts6091 2 года назад

question...which IC would be better for measuring the level of the music signal on a mixer board, the preamp signal available on the output of each music channel

@Enigma758 Год назад

Sounds like a serious application so probably the LM3916 would be best for that.

@carriersignal Год назад

Hi, curious to know if this chip (LM3916) offers or needs any type of calibration / adjustment, or is it already leveled and scaled correctly for reading the input of a signal properly? Thanks.

@alaricsnellpym Год назад

They have input pins for low and high voltage - and will measure the signal voltage's position between those two extremes. Often you tie the low voltage input to ground and the high voltage input to a suitable reference. The chip has an internal reference of something like 1.25V (I can't remember exactly) which can be used to measure a line level audio signal (should be max 1V peak to peak) so the yellow LED comes on when it hits 1V and the red ones come on if it goes over, or something like that!

@RODALCO2007 4 года назад

Very nice circuit board. great I C comparison.

@Stefano91ste 4 года назад

Thank you Rodalco :)

@TheSTONEones 3 года назад

Hi I'm trying to build a vu meter for a sound to light project. I've got lm3914s and 15s. 15s are better for audio vu meters. I've got all the data sheets. What I'm struggling with is what circuitry is needed to input an audio signal from a phone or as in my project a sensitive Mic amplifier some with an op amp. My hi gain op amp works ok but my LM chips are not responding. I've wired them correctly, triple checked lol. I understand the voltage divider/comparitor function. The chip will display a signal strength in the range set across pins 4 and 6. That voltage can be the internal reference voltage, manipulated if necessary or the divider can be supplied externally but not usually in most applications. How do I give the correct signal voltage/strength coming from the audio sources mentioned above is my main concern. Thank you for any advice you can give.

@Stefano91ste 3 года назад

Hi, I use a LM386 as a preamp for the LM391X ICs .. it works very well;) Like in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ex3waFdQrHY.html

@TheSTONEones 3 года назад

@@Stefano91ste excellent, thank you or your help

@dyonight 2 года назад

great! is it hard to implement a peak hold function as well? (when the signal hits the red leds) Thanks!

@Enigma758 Год назад

The chip is not designed for that. It is either in "bar mode" as shown in the video, or "dot mode" which displays only one LED at any given moment to show the level. If you want peak/hold, you will probably need to use a microcontroller with a specialized program.

@dyonight Год назад

@@Enigma758 ok thanks!

@juliobernal2463 Месяц назад

How operate on Dot mode?

@mavic6155 3 года назад

I have an Aphex 320A leveler which uses both LM3914 and LM3915. It has a problem now, which lead me to the LM3914 which is broken. The socket of this IC is melted and also the socket of the LM3915 (but this one still works... for now). Any idea what could cause these IC's to heat up so much? They might be 25 years old in the mean time, but I don't know if I should just replace them, or if I must dig a bit deeper. All IC's get 15V, according to a digital volt meter.

@Stefano91ste 2 года назад

Hi, there could be a short circuit in some track connected to the PINs or an abnormal current absorption from the LED side.. have you checked?

@mavic6155 2 года назад

@@Stefano91ste Not yet, but I am going to. Thanks for replying.

@kitlinghou6848 Год назад

Very nice explanation with demo. Could i use WS2812B LED (5050) with 9v input ? please advise

@Enigma758 Год назад

No, you need a microcontroller to drive those, they require a serial communication line.

@dvieira73 2 года назад

Top. Gostei do 3914👍

@MultiANDRE1963 4 года назад

I would like to have a PCB to mount a VU meter usin2 LM3915, do You sel it or could indicate where I can buy it.. Tks

@Stefano91ste 3 года назад

Hi, look at this vu meter ( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RHcf5MlmIC0.html ) in the video description you can download the PCB to order on JLCPCB. in the video there are all the instructions :)

@HOLLYWOODlosANGELES 3 года назад

*Bon test !*

@rogerioguerra4390 3 года назад

Melhor vídeo de comparação entre os 3 CI. Parabéns!

@Stefano91ste 3 года назад

Thank you! Gracias!

@betatester8800 6 месяцев назад

LM3916 and LM3914 are the same! LM3916 is fake! I fell for it too!

@agunghartono123 8 месяцев назад

Hi, i want make scream level for challenge, which one is better for use?

@Stefano91ste 7 месяцев назад

Hi, for this I would recommend the LM3916 as it has a preset dB scale

@agunghartono123 7 месяцев назад

Ok, thanx a lot bro,,😁

@zeljkoadzic1692 3 года назад

SIR, So who are you going to get your LM3915 from, and what are you going to do if it turns out to actually be a remarked LM3914?

@Stefano91ste 3 года назад

Hi, I generally buy LM3915s at electronics fairs.. but now thanks to the virus they are all suspended.. :( Fortunately I have always used DIP for my projects, so I have about 60 LM3915s at home that I can reuse without having to unsolder them.

@stupid464 Год назад

I want to make a vu meter using LM3915 ic. Can I use this for 500 watt amplifier? Please reply as soon as possible 🙏🙏

@shivaprasad2457 Год назад

POSSIBLE Bro

@eddyjohn3022 4 года назад

i want to have 16led in one connection to make like this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Jyrpx9rEGMI.html. what should be changed? please help

@TechnologyTubes 4 года назад

Best sir this is also mh job.

@TheAashishvideo 4 года назад

good work my friend

@Stefano91ste 4 года назад

Thank you!

@osvaldodestro6894 4 года назад

Ola!!! amigo...gostaria de fazer um medidor de tensão de um carregador de baterias com o LM 3915 pode me indicar um

@Stefano91ste 3 года назад

Hi, try to watch this video ( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-b0MZ3Vwh1C0.html ) but I suggest you to use an LM3914 for what you want to do

@cosmepereda2491 4 года назад

Excelente proyecto led's , gracias amigo, ya hice mi vumetro led.me quedó muy bien.gracias por compartir..

@kalyangautam7345 3 года назад

Bro I wanna make led fuel indicator using lm3915ic.We have to give Negative current for input.if tank become full it send 0-20 ohams unit if tank become empty it sends 220 ohams units.will you tell me circuit which works between 0-220 ohams negative current.

@Stefano91ste 3 года назад

Hi, the LM3914/15/16 perceive a change in voltage, not in resistance, and not in negative current.

@kalyangautam7345 3 года назад

@@Stefano91ste will you suggest me which component can i use for these type of circuit.

@borsi99 4 года назад

Hello ‚Stefano the Best‘❗️👍🏼 Which one of your VU Meters would you prefer as a finished give-away to a friend who is a semi-pro DJ and great music freak? Thanks! Boris🇨🇭

@Stefano91ste 4 года назад

Hi Boris, Thanks! I'd be on this with LM3916 and stereo configuration :) - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-l8oUQpGAOCw.html

@borsi99 4 года назад

Electronics Projects - Stefano91ste Yes! This one is also my favourite✌🏼

@agustinwatanabe6449 4 года назад

¿Me podrías pasar el circuito en la protoboard? ¿Could you pass me the circuit on the protoboard/Breadboard?

@Stefano91ste 4 года назад

Hi, the circuit can be seen in the video at 0:35 - the PCB file can be downloaded.. link in description:)

@GRXBDIT 2 года назад

You deserve a like

@Stefano91ste 2 года назад

thank you!

@Lamster66 3 месяца назад

I'm about to build a meter bridge for use with my 32 track mixer my intention is to use 40 leds per meter. I was thinking of using 3x 3915 and then lm3916n but that looks like I need to use 2 of those as i can only use the last 5 pins of each to make the red section Over 0db linear 1 db steps which will add significant cost unless I either try a different way of doing it (either run 35 leds and only have 5 reds. Or with the last 10 leds paired up, or try scaling a 3914 to run the top leds, or trigger them another way or just make the whole thing with 3915s instead) It's probably cheaper to use a micro or a pic. Ut as I have no Idea how to write code thats not going to happen. Of course the other way is to use either op amps or transistors and calculate the resistors to scale everything.

@FareedClarity 4 года назад

Wha, must try

@rodrigolindemberga Год назад

Em resumo: Lm3914 e lm3916 acionam os led de forma linear, porém o 3916 é ultra rapido quando comparado ao lm3914. O lm3915 é logarítmico acionam os led de forma multiplicativa. Sendo assim os LM 3914 e 16 são mais para medidores de tensão ao passo que o lm3915 é mais voltado para sinais de áudio ou qualquer outro que seja próximo ao espectro senoidal.

@rbaleiro 11 месяцев назад

nao, o lm3916 tbm eh escala log.

@betatester8800 6 месяцев назад

i see LM3916 is china fake !

@xiomarabravo1023 4 года назад

excelente . Felicitaciones

@Stefano91ste 4 года назад

Thanks:)

@danielrufino457 3 года назад

ML 3915 is best !

@marcoslazarodesouzalazaro5788 4 года назад

fico show👏👏👏

@mputraaditya9077 3 года назад

Signal input vu meter to speaker or preamp?

@Stefano91ste 3 года назад

Both speaker and pre-amplifier are good

@ohlala9136 4 года назад

Muito bom parabéns!

@Stefano91ste 4 года назад

Thanks! Gracias:)

@juliocesaralonsosanchez6993 4 года назад

Magnifico video amigo. Podrias enseñar como hacer una pequeña camara de eco para un aparato de radio frecuencia " cb " saludos desde monterrey nl. Mexico

@Stefano91ste 4 года назад

- Hola, nunca he hecho nada en un CB, pero suena interesante.. - I've never done anything on a CB, but it sounds interesting

@sajidmahmood4646 Год назад

Yes Vu meter super Old is gold

@mohammadalfauomey3443 4 года назад

Nice

@Stefano91ste 4 года назад

Thank you!

@ovalwingnut Год назад

Thank you. 3915 it is!

@mohammadamin4861 4 года назад

LM3915 is the best IC I use this one for my VU projects

@Stefano91ste 4 года назад

Hi, me too, it's one of my favorite ICs :)

@SachinB.A. 3 года назад

From Where can I purchase readymade circuit of LM3915

@Stefano91ste 3 года назад

Hi, on Banggood you can find dedicated KIT like these: - www.banggood.com/custlink/KmDYSo40qy - www.banggood.com/custlink/mGGYiOg6qi

@kristalmisticok4952 Год назад

...y la función punto??

@dj_sorra8605 Год назад

Which one works best on the signal?

@Stefano91ste Год назад

LM3916 for a more precise Vu-Meter

@karlheisenberg6350 Год назад

O 3915 parece ser o mais preciso.

@status.kingebu5397 3 года назад

Lm3915 ic board price koto

@indianaiscience3670 3 года назад

sir make a audio bands spectrum analyzer with lm3915 /// love from great India

@Stefano91ste 3 года назад

it is a project that I will surely make, greetings from Italy!

@itsaksharmate 4 года назад

So, which ic should be best.

@Stefano91ste 4 года назад

It depends on the use you want to make of it, for a simple Vu-Meter for example the best is LM3915

@thomasdunaway2573 3 года назад

nice soldering

@Stefano91ste 3 года назад

Thank you!

@techinvoke9048 3 года назад

I will go with 3915

@keithking1985 4 года назад

interesting, the 3915 was more sensitive!!

@Stefano91ste 4 года назад

that's right, and it's also the IC that I use most for my Vu-Meters!

@steinmix9448 3 года назад

But slow

@Lamster66 3 месяца назад

Not really that sup😢prizing when you consider what the 3 variants are supposed to do. The 3914 is linear so the voltage increase is the same for each LED if say the audio is 2V it would take 0.2V to light each LED where as the 3915 is Logarithmic 3db steps which is effectively a doubling of power to light the next LED so with the same 2V to light all 10 leds 9 will light at 1V, and 8 at 0.5v and so on. As for the 3916 it is designed to mimic a moving coil VU meter from - 20db to +3db so the steps aren't equal it starts off Logarithmic and gets more linear from around - 3db there is also some hysteresis built in so that it shows average levels not instantanious ones. Therefore it's great for analouge metering if you are recording to tape but no good if you need to see the peaks that clip digital signals.

@320roscoe 4 года назад

Make stream deck with LCD key (macro pad)

@AgentOffice 2 года назад

Can I buy this kit

@Stefano91ste 2 года назад

Is not a KIT, you can buy the PCB only on jlcpcb.com

@hadibq 2 года назад

👍👍👍👍

@bambangtetuko2031 4 года назад

work to 5v dc???

@Stefano91ste 4 года назад

Yes, but the luminous intensity of the LED will be lower

@bambangtetuko2031 4 года назад

okay... thank you .. . input vu meter from input audio(jack /mp3 player) or out amplifier?

@Stefano91ste 4 года назад

Amplifier output

@bambangtetuko2031 4 года назад

thank you :)

@pierch99 5 месяцев назад

travail pro...

@HarpreetSingh-yo9ir 4 года назад

Hi Sir. This is very urgent. I was recently working on rpm meter usinf lm2917 ans 3914 from 4 months.i have cascaded 6 lm3914 .Today i completed my circuit but led arent function properly. Can you send me the circuit diagram or how to cascade them. I watched your rpm meter video but there i did not understand how you cascaded lm3914. I spent lot of efforts on it. COULD YOU PLEASE TELL ME HOW TO CASCADE 6 LM3914. PLEASE😞😞😞

@Stefano91ste 4 года назад

Hi, in this project i cascade 5x LM3415 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ox5TAZAnTrY.html but the diagram is the same for LM3914.. you can use this diagram for add one LM3914.. However to connect the LM391X in series it is necessary to connect pin 6 of the first with pin 4 of the second, pin 6 of the second with pin 4 of the third, pin 6 of the third with pin 4 of the fourth.. etc. PS: in my rpm meter video you can see the circuit diagram, and also in this video with the 5x LM3915 you find the diagram towards the end of the video

@AlfaleoTech 7 месяцев назад

3916 best

@1954charlie Год назад

I respect you and your work. If I praise what he does he will thank you and answer. I asked twice (for a microphone) how much the counterallas should be 2.2k (or 2.7k). I sit here looking at his pages daily. No answer, but I'm just asking for a number. You also understand what you're doing and I'm working against depression. It takes a little bit of success sometimes. My respect.

@FratCan 4 месяца назад

LM3915 is batter than others.

@gerardoaurilio3457 4 года назад

Bella Stefano, ho già ordinato i PCB. Per quello che cerco io mi sembra più indicato il 3914, anche se il 3916 non mi dispiace.

@Stefano91ste 4 года назад

Ciao! Grande😎 Il 3914 l’ho usato tanto tempo fa per un progettino di un contagiri a led

@beeshorts2743 3 года назад

3914 and 3916 work allmost same

@Stefano91ste 3 года назад

Apparently yes, but actually they have been designed for different purposes.. LM3914 for applications like Volt-Meter, Thermometer etc and- LM3916 for audio application. - LM3914 is linear. - LM3916 is logarithmic (with a defined dB range)

@mehdikho 4 года назад

Music name 😃😃😃

@Stefano91ste 4 года назад

Hi, are two songs without copyright, I wrote their titles in video description :)

@tikudjapoweramp9864 4 года назад

Pdf

@Stefano91ste 4 года назад

Hi, you can see the circuit in the video and download gerber files from video description.

@champalalkandara7639 Год назад

Sur mujhe vu mitor ki pcb chahiye apka wat nomber de do

@juliobernal2463 2 года назад

I don’t see a remarkable difference!!

@user-ej8ls1gg7b 3 года назад

هاذا هو ic LM3915 😂

@betatester8800 6 месяцев назад

Я вижу LM3916 это перетертая LM3914?!

@Stefano91ste 6 месяцев назад

Hi, they're like that from the factory

@betatester8800 6 месяцев назад

@@Stefano91ste Yes, the Chinese supply the LM3914 chip in LM3916. I suffered for a long time until I realized what the problem was. I pulled the real LM3916 out of the tape recorder and then I saw the difference. I also make indicators.

@betatester8800 6 месяцев назад

@@Stefano91ste If you compare, your LM3914 and LM3916 look the same. This shouldn't happen. They have a big difference between the comparator divisors.

@serbeer1240 4 года назад

Уродская Схема там есть возможность выбора DOT или Line / //

@Virtualik 2 года назад

не додумался перемычку на музыке снять. остолоп

@sigelander 4 года назад

solo es el armado de un kid,,, nadie hizo nada..xd

@williamguillen4113 4 года назад

Está explicando la diferencia que hay entre los tres ICs. Se dice Kit, no Kid. Y tampoco es un Kit.

@googolmorons620 3 года назад

thanks for info, but... begging for subsliking suxx, videostream-integrated ads - ultra-megadrive-power-suxx so, enjoy your minus)))

@Stefano91ste 3 года назад

What???

@googolmorons620 3 года назад

@@Stefano91ste in case you are really interested: 1. there are pretty effective tools eradicating advertisement out of user's web traffic. the kind of ad they cannot wipe out yet is the ad integrated directly into video stream. i feel almost excellent about web ads using one of these tools - ads just don't exist for me. none of them. except... well... i have to spend time, take some actions to fastforward the ad, etc. and i am not payed for overbullshitting my mind with the ad perception. so i mark the video stream for other people as suxy because it is infected by the advertisement. nothing personal ;) 2. allmost every moron publishing self-made video here is spending viewer's time and attention with "subscribe my channel and click the 'like' button. pleeeeeeeeease"-begging. to be short, "subslike-me-please" or subslike-begging. there are no tools wiping out such begging out of the video stream developed yet. so user is not being paid for mind overbullshitting and have to spend time, fast forward, click "close", etc. again, i mark the video stream for other people as suxy because it is infected by subslike-begging. and again, nothing personal here. good luck and lot of thanks. the info you provided helped me to figure out which one - LM3915 or LM3916 - fits my needs best ;)