Logic Pro Busses - Absolutely Everything You Need To Know!

Подписаться 11 тыс.

Просмотров 75 тыс.

50% 1

Pre Fader, Post Fader, Post Pan, you have the choice, but when should you use them and why??
In this video I'm going to show you everything you need to know about using busses in Logic Pro X; why each is useful, and how to know the difference between the options!
✅BECOME A MEMBER OF THIS CHANNEL FOR MORE GREAT CONTENT AND PERKS!
✅www.youtube.co...
Make sure to subscribe, like this video and check out the rest of the channel
‼️ROCK SNARE SAMPLE PACK‼️ - shop.nastudios...
💪Multi velocity, powerful, natural snare samples for hard hitting drums💪
‼️BIG FAT KICK SAMPLES‼️ shop.nastudios...
🥁FREE SNARE SAMPLE PACK🥁 - shop.nastudios...
Get 7% off your first year of DistroKid here: distrokid.com/v...
💻 www.nastudios....
☕️ buymeacoffee.c...
📱Instagram: / samlooseaudio
📱Facebook: / nastudiosuk
▶ALL THE GEAR I USE:
🎛️Audient iD44 - amzn.to/3VZP4Gd
🎛️Focusrite Octopre Dynamic - amzn.to/3vVTLq3
🎛️Scarlett 18i20 - amzn.to/3UktpYh
🎧Behringer Powerplay Pro-8 - amzn.to/4bdaog3
🎧AKG K240 mkII - amzn.to/3xuRLp2
🎤Shure SM7B- amzn.to/4aR3kW3
🎤Shure SM57 - amzn.to/3TX8wRh
🎤Shure SM58 - amzn.to/3Q1vAx8
🎤Audix D2 - amzn.to/3U1W4Qi
🎤Audix D4 - amzn.to/3VUN5TL
🎤Audix D6 - amzn.to/3vIeI7X
🎤Audix i5 - amzn.to/3JDYLD7
🎤Audix DP5 - amzn.to/3vUxCsa
🎤sE Electronics Arena Pack - amzn.to/3vTxMju
🎤sE Dynacaster - amzn.to/3vVU18v
🐜Radial SB-1 - amzn.to/3Q4v0yO
🐜Radial SB-2 - amzn.to/3Q0vEgw
📷Sony A6400 - amzn.to/3vGXpnK
📷Sony 35mm f1.8 - amzn.to/3vIeUEd
🖥️Samsung U32J59x 4K Monitor - amzn.to/49Cx0oE
🖲️Kensington Expert Mouse - amzn.to/49KFdri

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 173

@SamLoose 7 месяцев назад

Thanks so much everyone for the great feedback on this video! For more content, early access to videos, and custom made videos, check out the member's section of my channel! ru-vid.comjoin Take care.

@dclaman 2 месяца назад

Excellent, clear explanations. Thank you.

@biachi4011 Месяц назад

Do you have any videos on how to mix drums and base on an analog board for instance the Soundcraft MTK 22 and then have it print back in logic? I can’t find videos on that anywhere.

@IScottTheScotch Месяц назад

In two minutes I learned more from this gentleman than some donkey who prattled on with confusing similes for 11 meandering and unhelpful minutes. thank you sir, you made busses make so much sense.

@s.l.2227 Месяц назад

Your series and parallel explanation is the first time buses have made sense to me. Thank you so much!

@chumcool 9 месяцев назад

When you get to a certain age where you realize you don’t have enough time left on earth to learn and master the one thing you’ve always wanted to do…

@jameswhitaker4357 6 месяцев назад

That’s why I started young bc I’m still figuring this shit out 8 years later lol

@dijital4588 5 месяцев назад

I started getting into production during Covid @ 40+ years of age. I’ve seen kids with a few years experience wow me with their skills and knowledge. Jimi reached goat status before his 30th birthday. If I’m fortunate to have another 40 years on this ride, then there’s no room for excuses. “Do or do not. There is no try.”

@slipperychugger 5 месяцев назад

@@jameswhitaker4357I stg lol I started when I was 12 gave up like 3 times got back into it around 17 and I’m 20 this year and it’s still so hard

@jameswhitaker4357 5 месяцев назад

@@slipperychugger that’s funny af I basically opened up fruity loops 3 times in high school and threw drums on a song no tempo set😂 but became fye in college I would make beats Inbetween classes in the library 📝 still going now at 26 it’s def worth it. I’m really just getting my stride now fr took years of learning my boi 💯

@slipperychugger 5 месяцев назад

@@jameswhitaker4357 damn bro can I ask what the most difficult thing for you to learn was?

@vladibarraza Месяц назад

I edit video, so the analogy with serial and parallel nodes was brilliant.

@enginpolat-t1f 3 месяца назад

Excellent Teacher !!!! the method you transfer the datas to the minds is great.Thank you for this video efficacious lesson.

@vewilli Год назад

If only I had a bit of knowledge of yours. Incredible. I’m far away of that knowledge how to use buses like you do! Great, but I‘ll have to listen to this many more times, and even then I won’t understand everything concerning buses. But this explanation tells me you’re a complete expert for/in Logic. It’s worth to subscribe. 👍🏻👏🏻🙏🏻

@SamLoose Год назад

You’ll get there I’m sure 🙂 Thanks for watching!

@Sujimon1 11 месяцев назад

Good one. Sir, you have explained all about Busses in a brilliant manner. Thanks a lot.

@babonneau 6 месяцев назад

Very good, clear and structured tutorial! Bravo, excellent job! Your good video deserves at least just as many views (5 times more) as Nathan James Larsen’s video about it. His video is not as clear and structured as yours, lacks an intro and starts off with begging for likes and subscribing for far too long before the viewer even gets any value from the content. Good that you don’t do that. Maybe it’s about the video poster showing him with a cap and a pointing finger? People may find it familiar (I don’t, as I dislike caps and clickbait video posters with OMG faces). There was my feedback! Continue the good work 👍

@jjgillo 9 месяцев назад

Thanks! This was a very informative demonstration.

@whitenoisebe 10 месяцев назад

Very useful indeed, finally I start to grasp it!

@peteharman1061 Год назад

Spot on Sam I will eventually absorb all this excellent knowledge much more quickly now thanks to your .......way of putting things... thanks

@WorldOfArtWorld 5 месяцев назад

Great video, thanks!

@SamLoose 5 месяцев назад

Glad you liked it!

@AndreaGirelli-di9sc Год назад

Clearest content on the bus topic. Well done man👏

@SamLoose Год назад

Much appreciated!

@stevewalsh1718 Год назад

great delivery.

@SamLoose Год назад

Thanks for watching, Steve 👍

@janetperryman9074 6 месяцев назад

great video

@wernerm.7003 Год назад

Very well explained! A big thumb up from Germany!😊

@SamLoose Год назад

Glad it was helpful!

@shazmirshahi4973 Год назад

Thank you what a godsend you are a definitive must watch tutorial video thank you once again

@SamLoose Год назад

Thanks for checking it out! Glad it helped.

@coachglenn4 8 месяцев назад

Well done. Great presentation. Thank you!

@SamLoose 7 месяцев назад

Glad you enjoyed it!

@davidcooper2750 11 месяцев назад

everything i needed to know :)

@danielstartek9729 9 месяцев назад

He's still on the Merry Pranksters bus!

@jastinartis 11 месяцев назад

Well explained. Thank you so much!

@SamLoose 10 месяцев назад

Glad it was helpful!

@mrskint55 Год назад

Many thanks for posting very well explained .

@SamLoose Год назад

Thanks for watching!

@naynayw Год назад

This is so helpful thank you!!!

@SamLoose Год назад

I’m glad it was useful to you 👍

@joeviegas 6 месяцев назад

how do you export busses without creating and bouncing external bus tracks

@lisaheesters4508 9 месяцев назад

sick

@randomstation8820 Год назад

wow 101/10

@vtenort 3 месяца назад

Please remember that, you know all of this, and we don't. I come to listen to your knowledge and learn from a higher level than I am right now, I much appreciation that you are sharing your experience and knowledge. It would be nice if you would slow your delivery down and take a millisecond or two breath, for some of us that need that to obsorb what you just said. It would lesson the amount of rewinds. I understand that Time is Money but, but spend that extra 3 cents. Thanks. 😀

@vas_car Год назад

You've got it locked. Excellent presentation. Thank you.

@SamLoose Год назад

Glad it was helpful!

@chrisb8429 6 месяцев назад

How do I increase the Send Level Knob using a keyboard shortcut? I want to use it to automate my delays using touch/latch mode

@SamLoose 6 месяцев назад

I’m not sure you can unfortunately 😞 not without a controller of some sort.

@patrickevanfleming3469 Год назад

I've transferred my old analogue cassette recording from the 90's as a single track in Logic Pro and am trying improve the sound quality. Do you know what that process is called? I can't find anything about this subject online. The only thing the internet talks about is how to make new digital recordings sound more Analogue. I'm trying to do the exact opposite. Any advice? Do you have any tutorials on that subject? Anything? Thanks

@SamLoose Год назад

Hey Patrick. Drop me an email at sam@nastudios.co.uk and let’s see what we can do 👍

@babyjuan7276 Год назад

I am currently a developing engineer, this was helpful , but still a little lost. Can we use those same buses in a different template for another mixing session?

@SamLoose Год назад

I’m glad it helped. Yeah absolutely, you can add them in the same way as the tracks 👍 If you’re adding tracks that have sends going to busses, Logic will ask you if you’d also like to add the busses, which is handy.

@frederikgroborsch3367 Год назад

Why the heck ist bus 16 called aux1?

@SamLoose Год назад

There is a reason…I just can’t remember what it is…

@DeeJayRel Год назад

This was the best explanation of busses I've encountered on YT for Logic Pro X Thanks!!!

@GladysGrace001 Год назад

Totally agree

@SamLoose 9 месяцев назад

Glad you think so!

@SamLoose 9 месяцев назад

Thanks so much!

@toddmaek5436 3 месяца назад

As a former electronics technician by trade and a hobbyist wanna be music producer when you made the analogy with series and parallel that opened a dimension of new understanding for me.

@chrislarnder3357 7 месяцев назад

Without doubt, the most understandable explanation of this subject I have ever seen……or maybe I’ve watched so many it’s finally making sense 😂…..clear….concise…..great visual demonstration……..THANKS!

@jas_bataille 9 месяцев назад

I love this, but what I never understood is why busses are labeled as such in Logic... because those effect sends, and should be called aux sends (which they are in the mixer; very weird) rather than buses. Obviously, you can bus tracks together differently, but I like it emulating an in-line console workflow, and that part always confused me. Since when are we engineers calling it a reverb buss instead of a reverb send?! It's not bussing tracks together... I think they just reverted "aux" and "buss" somehow. Kind of like how Fender reverted trem and vibrato on their amps. A bit of a pet peeve of mine xD

@SamLoose 9 месяцев назад

It’s a good point. Bus is just the default way of saying “this route takes audio somewhere.” So it could be the master bus, an FX bus, a monitor bus. It’s just talking about audio taking a certain path to go somewhere. It’s really a cover all term, so a bus could be a send, or a return, or an input, or an output. It either makes it simpler or more complicated, depending of which way you look at it! Thanks for watching!

@joelaplaca1546 Год назад

What a clear and concise explanation of buses in Logic. Thanks for sharing your expertise. There are times when we don't want busses though (or create our own)! Would you know how to load a drummer tracks without the busses it creates? I know you can do so with instruments by 'enable patch merging' and turning off sends. The same doesn't work for drummer tracks though. Any help appreciated . Thanks again!

@buzzfretwear2906 Год назад

VERY well done. This was a great refresher for me but I also learned some new things. Your manner of presentation is excellent and your explanations are clear and easy to understand. Thank you!

@SamLoose Год назад

Thanks for checking it out! I’m glad it made sense and was presented in a way you could relate to 👌

@gred808 8 месяцев назад

That was a lesson well done!!! This is the best tutorial on utilizing Logic's bus and send functions that I have found. Exactly what I needed in order to create some custom ambient guitar channel strip settings. Opens up many creative pathways that I have not thought of before. Thank you very much!

@jeffrey.a.hanson 8 месяцев назад

Try subtly adding some of your other instruments to your ambience busses. It can create a really cool buildup effect if you add tracks as the song progresses. If done right, by the last chorus/outro, the mix will sound huge and more layered than it actually is. You have to use automation or new tracks for this but it’s worth it.

@southisaac 2 дня назад

I notice in your description you use the Behringer Powerplay personal monitoring system. Do you have any videos explaining how you route instruments in logic pro to the P16? I can’t figure it out for the life of me.

@LeeWaltonUK День назад

Thanks. That was a really good explanation for noobs like me on how to use buses. Just what I was looking for!

@ianevans7110 11 месяцев назад

Thank you for this. At last I found someone who would explain this simply and concisely without being bombarded with complications that I did not want to know about. Well done !

@shazmirshahi4973 Год назад

Sorry mate I just checked mistakenly gave you thumbs down while you truly deserve is thumbs up I've corrected and adjusted and I'm very thankful for this informative video we love you thank you once again, this is by far the clearest definition and tuition on buses thank you thank you thank you

@dangha5942 25 дней назад

i've watched many tutorials on youtube about logic busses and until this one i have to say that this is the best one!!! thank you somuchh Sam

@colewade8767 Год назад

I’m about to get logic and I think this video final helped me get a solid grasp on audio buses thanks mane

@Andrewvictory 4 месяца назад

Incredibly helpful. Thank you.

@hartleygabolinscy3152 Год назад

Thank god for Sam. Brilliant way of showing the way to go with options. Sam , you are of the highest value for us simple brassed off musicians and writers. Fantastic. ❤️ cheers from nz.

@SamLoose Год назад

I appreciate that! Thanks for watching 👍

@johnchristopher32 Месяц назад

Really useful tip about the mix all the way up on the plugin, for a long time I struggled with the concept of balancing the 2 signals and it always used to sound muddy so having the bus plugins purely wet is a great shout!

@saraferrandez.violist 4 месяца назад

Great vid

@786Muzik 3 месяца назад

Thank you for sharing this!!!!

@ANDYFIRTHSRETRO-SOUNDS-fc2hg 3 месяца назад

Calm, informative, expert knowledge without carrying on like you're auditioning for a Hollywood action movie. Great work! Thanks much.

@21stCenturySin Год назад

I have a question about this. If you have plugins on the main track, does it send the audio including the plugins to the bus? Or does it send the audio without the plugins to the bus?

@jaybuck9124 3 месяца назад

Ok but where can I buy a commuter pass to use the bus?

@fiveshorts 6 месяцев назад

How many times did you say Final Desination?

@GladysGrace001 Год назад

This was very thorough but I got lost at the Pan, Post, Pre fader. I’ll need to watch this 5x to get it. 1. Series vs Parallel - Got it 2. Studio Out is final destination- Got it👍🏾 All the in between I’ll have to figure out. 😩

@SamLoose Год назад

Hope you got there in the end 👍 Let me know how you get on.

@MrSoloPaul 4 месяца назад

You are a GREAT teacher! You speak slowly, you speak clearly, you don't assume the person listening has a lot of prior knowledge, and you're NOT trying to show off!, as so many of the other so-called experts do. I can actually understand you! I just wish I'd discovered you sooner. Thank you Sam!

@hikstrmusic Год назад

Thanks, no wonder my mixes always cloudy, the effects been still washing both channels

@SamLoose Год назад

The more you know!

@Yinyanchant Год назад

Me now overthinking…why bus 16?. Why not 1 ?🤔🤔

@SamLoose Год назад

16 is a good number, and I always save bus 1 for my drums out of habit 😉

@60beatsCrimeFamilyEnt Год назад

BEST VIDEO, DUE TO THE HOST THANK YOU SIR🎉🎉🎉🎉

@SamLoose Год назад

Thanks so much!

@MentalS6k 10 месяцев назад

I don’t know why you haven’t come up on my RU-vid feed b4, but I am so happy I have. I subbed within 30 secs! Brilliant explanations & style of content. Absolutely amazing. I look forward to your future & past videos. Cracking job. Well done & keep up the good work Sam. 👏🏾

@SamLoose 10 месяцев назад

Happy to have made it your feed! 👌

@LisaWaterhouse-t8q 4 месяца назад

Some people are born teachers!!!! That is you for sure. Having knowledge and being able to impart or share that knowledge are 2 very different things. You're one of the best teachers I've encountered.

@SamLoose 4 месяца назад

I appreciate that, thank you 🙂

@thebassgum Год назад

Thanks im a beginner in logic and will try this out on my distorted guitar tracks Just subbed also

@SamLoose Год назад

Awesome, thank you!

@cajuncrackerranch7990 Месяц назад

Gratitude 🙏

@quantum_ocean 5 месяцев назад

ok i want a mono kick with a mono delay. I have a mono channel with my kick audio and send to a mono bus with a dual mono delay but the output is stereo because I only hear the delay on the left. how to make left and right the same? I added a Utility > Gain effect set to Convert Stereo to Mono after the delay but still, same issue. it's not really mono

@SamLoose 5 месяцев назад

Which delay are you using?

@quantum_ocean 5 месяцев назад

@@SamLoose OK i figured it out. I was using a mono bus and mono version of the Gain utility. SEems the bus must be stereo (counter intuitive) and only the Stereo version for he Gain utility includes the "mono" toggle ¯\_(ツ)_/¯

@Karlagarciamusic 7 месяцев назад

great explanation ! thanks

@SamLoose 7 месяцев назад

Glad it was helpful!

@cassetteo Год назад

I only use busses and have for years in logic. More busses = more control. None of my source tracks go to the stereo output or a bus. Each track goes to a dry aux as well as a wet aux, then the wet and dry are then summed into a stereo bus.

@bsilentmusic Год назад

Interesting. What effect does this have on the overall sound or track?

@SamLoose Год назад

That’s pretty wild, but I like it. So you have a regular mix bus and an FX mix bus, which are then summed together to create your final output?

@iceshcratiote3635 11 месяцев назад

Barbacode

@tymelyneentertainments7478 3 месяца назад

Very well explained!!! I use busses and sends and aux always, but it's always good to know that you're doing it right and find out other ways to use them. Thanks very much

@Hecreoquesoypancho Год назад

hello sir, nice class, the best teacher I've seen here in RU-vid. i have a question, I try to do the same as you, when I turn down the volume of the guitar, I have no sound but also no bus sound, just no signal, do you know what am I doing wrong?

@MattandCamrynReact 6 месяцев назад

I have watched so many videos recently in this one finally made it click… Thank you!!

@MichaelBrookins-xx5cy 5 месяцев назад

Great Info. Been looking for an explanation that didn't take a degree in the How To? Thanks a Platinum 😎👍

@bulletsandcaskets45 10 месяцев назад

I appreciate you a lot brother

@bulletsandcaskets45 10 месяцев назад

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

@robsauls5302 6 месяцев назад

Is this good for vocals?

@SamLoose 6 месяцев назад

Busses in general?

@Ronholtmusic 10 месяцев назад

Great info thanks

@SamLoose 10 месяцев назад

Glad it was helpful!

@theofficialsirwilliam 6 месяцев назад

im new to logic and had no idea what buses were.. now i know. you explained it so simply. greatly appreciated. i just subscribed to your channel to get some more learning tips

@ErikAnders 8 месяцев назад

Oh that’s great for trigger! I’m so glad I watched this whole thing 😅

@bobgennovario2839 Год назад

Great explanation! Very easy to follow and understand. Thank you!

@SamLoose Год назад

Thanks for watching!

@EmilyLeeMusician 7 месяцев назад

Thank you so much for this video. I have spent ages trying to find a coherent video explaining the very deepest regions of how buses work without it being brief, badly explained and done with a loud voice. Subscribed!

@SamLoose 7 месяцев назад

Glad it was helpful!

@malikahpowell3285 Год назад

Thank you for clarifying that in your video found it pretty informative:)

@tukimono Год назад

Hi, thank you for you contribution to humanity, this video is very helpful. May I ask you a question about some minor issue regarding the send tab configuration. I see, when you click on the send tab, it shows the BUS option and right below it shows an OUTPUT option. In my logic it only shows the BUS option. I want to use the OUTPUT option in order to use an external effects procesor such as a Lexicon. How do you assign this OUTPUT option? Sorry for bothering with this, but I'm a little frustrated. Thank you for your time.

@SamLoose Год назад

Hi, thanks for watching! When you see this (or rather, don’t see this) are you connected to an interface? If you’re just running off your computers soundcard then it won’t show any other outputs as there aren’t any to speak of.

@JulianHarris Год назад

The first Logic Pro bus video that I actually understand. Nice work! I’ve subbed. I wonder when Logic Pro’s UI will be updated to visualise the audio routing on a big 2D panel … 🤔

@SamLoose Год назад

I’m glad it was easy to understand!

@justinngariki 7 месяцев назад

Awesome, man. Thanks.

@clowncarqingdao Год назад

Nicely explained, mon ami! Up vote for you! Thanks!

@SamLoose Год назад

Much appreciated!

@paulanderson73 Год назад

Excellent explanation!!!!

@SamLoose Год назад

Thanks Paul 👌

@Salantsoundstudios Год назад

Cool trick with slate trigger! Thanks!

@SamLoose Год назад

Awesome, right? So helpful!

@shazmirshahi4973 Год назад

this is by far the best explanation of bus in Logic Pro i've watched and listened to others explain this you do it with only one example one channel and one bus and you show where the child exists in the mixer where we can see this happening I could only understand you to your explanation your teaching your delivery, couldn't thank you enough

@SamLoose Год назад

Thanks so much for checking it out, I’m glad it helped!

@jonahwaltonmusic Год назад

There is no 'X' any more. ;)

@Ak.studio58 10 месяцев назад

Best video thx

@davidbrown3902 10 месяцев назад

thank you !!!😇

@BCHEENI Год назад

of all the bussing videos ive watched, this is by far the most informative. subbed

@SamLoose Год назад

Awesome, thank you!

@vraalten Год назад

Thank you for this very clear explanation! Very helpful!

@SamLoose Год назад

Glad it was helpful!

@deborahdyer-w9j Год назад

this was exactly what i needed to know, thanks!

@SamLoose Год назад

Glad it was helpful!

@irinalensky7403 Год назад

Brilliant explanation, thank you!

@SamLoose Год назад

Thanks for watching 👍

@barnabythwaites5277 Год назад

Excellent vid and very fluently presented

@SamLoose Год назад

Thank you kindly!

@iamdjtab Год назад

Excellent tutorial

@SamLoose Год назад

Glad you think so!

@jonatanzawistowski933 Год назад

You’re an great teacher ! Thank you !

@SamLoose Год назад

I appreciate that, thanks!

@guckfoogle2779 Год назад

Thank you!

@SamLoose Год назад

Thanks for checking out!

@bradferguson9840 Год назад

Fantastic explanation - thanks! Can I suggest some content? How to evaluate the results of Plugin Doctor (e.g. what are second and third order harmonics in analogue emulations) and more generally, how to use it. Thank you.

@SamLoose Год назад

Thanks for watching, Brad. I’ll certainly keep it in mind, sounds like it could be really interesting.

@bradferguson9840 Год назад

@@hardlines2635 If you went to college, you'd know that in this context 'there' is spelled t-h-e-r-e. Just sayin'.