LOKLiK Crafter: Print and Cut Calibration

Подписаться 31 тыс.

Просмотров 13 тыс.

50% 1

We have made several attempts to get our LOKLiK Crafter to do a print and cut calibration, and every attempt resulted in a slightly inaccurate offset. LOKLiK support has reached out and sent us a fairly comprehensive document with several steps that may resolve this issue. We'll publish an updated video as soon as we find one that works. Thanks!
#loklikcrafter #loklik #printandcut
Cricut recently experienced a similar problem that has since been resolved. Hopefully the engineers at LOKLiK will figure this out soon and issue a software or hardware update. Hit us up with any questions in the comments and we'll try to answer them as best we can. We'll be producing several unbiased LOKLiK demonstration and how-to videos on this channel on our own dime, so 👍 and subscribe to our channel here: www.youtube.co...
✅ Materials used in this video include (affiliate links):
➡ LOKLiK Crafter Cutting Machines - amzn.to/48B4XXB
➡ LOKLiK Idea Studio Software for PC and Mac: www.loklik.com...
✅ Need more crafting products?
👉 Visit Cricut's Official Site: cricut.pxf.io/...
👉 Check out our Amazon LOKLiK Idea List: amzn.to/41NlwMR
👉 See What We've Made on Etsy! www.etsy.com/s...
👉 Teckwrap: teckwrapcrafta...
✅ Subscribe to our channel!
Did you enjoy this video? Do you have any tips to share? Let us know in the comments section below. We appreciate every 👍 and would love it if you’d subscribe to our channel! It's free! Subscribe here ➡ www.youtube.co...
✅ Join our LOKLiK Crafter Cutting Machine Facebook Group - / 6770205346369071
✅ Let’s Connect!
😎 Instagram ➡ / familyunit_on_youtube
😎 Facebook ➡ / ourfamilyunit
😎 TikTok ➡ / familyunit_on_youtube
😎 For all inquiries ➡ hello @ freshandfelicia.com
🎞️ More Helpful How-To Videos
✓ How to Use a Cricut Maker - • Best Introduction to C...
✓ Brother Scan n Cut SDX125 Review - • Brother Scan n Cut SDX...
✓ Brother SE1900 Sewing and Embroidery Machine - • Master the SE1900: A B...
❇ Disclosure
Links included in this description and comments include affiliate links. If you purchase a product or service with the links that we provide we may receive a small commission that helps us pay our bills. Don’t worry - there is no additional charge to you. Thank you for supporting our channel so we can continue to provide you with free content!

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@craftwithfelicia Год назад

✅ Materials used in this video include (affiliate links): ➡ LOKLiK Crafter Cutting Machines - amzn.to/48B4XXB ➡ LOKLiK Idea Studio Software for PC and Mac: www.loklik.com/download

@wendymasters367 11 месяцев назад

Interesting

@shellywunderlich6751 Год назад

I mainly bought this machine for print and cut (and the price being new to cutting machines), but your video at least told how to do that even though it's not working properly. It was very helpful!

@craftwithfelicia Год назад

Thank you. I’m still hopeful it will be working soon and will update if it goes. 🙂

@cresencioprintingservices4187 7 месяцев назад

@@craftwithfelicia Hi I also have problem. I have alot of trash from machine calibration.. huhu.. the left side is almost accurate but the right side of the sheet is off it's offset in the loklik studio. 😭

@admtim Год назад

Gave up and returned mine to Amazon today.

@craftwithfelicia Год назад

I really want this machine to rock but they have some kinks to work out.

@mollygreathouse1191 Год назад

I was looking at this machine but I bought the Cricut Joy Extra because I know print and cut works.

@craftwithfelicia Год назад

It works great! I’m hopeful LOKLiK will get this working for their machine soon.

@FreshandFelicia Год назад

You would think they would have learned from Cricut print and cut calibration problems 😢

@craftwithfelicia Год назад

True.

@FrancisArmstrong-vu4cg Год назад

@@craftwithfelicia Great video, thanks. In your experience, what was the resolution time for Cricut? Secondly, anyone know how to let Loklik know they have an issue? Lastly have you noticed any other issues known at this time?

@craftwithfelicia Год назад

@@FrancisArmstrong-vu4cg GREAT questions! The Cricut debacle took at least a month to resolve, but it's perfect now. LokLik has a support email on their website. We heard back within 48 hours on one resolved issue, but radio silence on the print and cut issue. Zero other known issues on our part.

@DonluNatic 8 месяцев назад

Hola, he hecho todo esto pero no me aparece la cuadrícula en la derecha. ¿Me puedes ayudar? Gracias.

@craftwithfelicia 8 месяцев назад

The print then cut registration marks are only on the left top and left bottom on the latest software v1.9.7 and firmware v0010.

@eliteplus4742 11 дней назад

Hi Felicia, i was going to buy a cutting machine and from the price point, Loklik look unbeatable but did they fix the print&cut aligning in the latest update? if no, any recommendations? i will not use the in-house app to create designs, will be using .AI to import most of the time. thanks

@craftwithfelicia 10 дней назад

You can get LOKLiK at a good price, but there are limitations/frustrations. I still haven't been able to get print then cut to work with the 2.0 software update. With the holidays coming, I'd keep an eye out on a Cricut or Silhouette....personally. Here's a Facebook group you may want to join, if you haven't already - lots of helpful people. facebook.com/share/knzUcx8XHGQk6qeN/

@admtim Год назад

I wonder if anyone else is able to get this work and what their secret is

@craftwithfelicia Год назад

Wondering that too. Gonna try again.

@sabeyneh Год назад

its perfectly cut mine 😊 visit my wall for the process and settings

@admtim Год назад

@@sabeyneh You do not show finished cut

@craftwithfelicia Год назад

We watched your video. We completed the same exact process. The problem is with the actual cut, which you did NOT show in your video. I am sure when you cut your sticker you will see the same error we did.

@FreshandFelicia Год назад

@@craftwithfeliciashe’s probably a shill 😂

@wendymasters367 Год назад

Ouch that is going to hurt them. A lot of people buy these machines to make stickers and a print and cut doesn’t work, they’re out of business

@craftwithfelicia Год назад

True. I'm not giving up trying and I did reach out to LOKLiK but haven't heard back yet.

@FrancisArmstrong-vu4cg Год назад

I heard back from loklik europe ... Could you sent us a picture of the offset or the issue , so we can have a better understanding what is wrong? This way we can contact the development team to solve the issue. I was hoping for a we are aware and working on it reply, anyhoo, I'll provide the information requested on my return from holiday.

@jasonmachugh Год назад

Just returned mine and bought a Cricut Joy Extra.

@ruthanneguiangpascual 2 месяца назад

@@jasonmachugh Hello, does Cricut Joy Extra supports A4 sticker paper?

@bumpsandhollowsboutique 11 месяцев назад

I got this with for the sole purpose of print to cut. I hope the steps they send you work and you are able to do an update video.

@craftwithfelicia 11 месяцев назад

We continue to work with them and hope this is resolved soon. 🙂

@donpayne1040 5 месяцев назад

Hey good to see neutral Loklik info on YT. You are not a vinyl cutter agony aunt, but, multiple passes on MY Loklik are not aligning, does anyone know why?

@craftwithfelicia 5 месяцев назад

I hear that people are calibrating many, many times before they get accurate cuts. I'm waiting for the new version of the software/firmware that I'm told will be out in June. I have high hopes it will fix a lot of the issues people are having.

@yanxacreations Месяц назад

I am not able to gwr it to read the valibration so mine is not calibrated at all. Is there anyrhinf i can try

@craftwithfelicia Месяц назад

Make sure you’re on the latest version of the software and firmware. I haven’t tried stickers in a while or with the latest release. Check this Facebook group - they may be able to help. facebook.com/share/xAwXiG6mKpL6jjaL/?mibextid=K35XfP

@LissettetorresG 8 месяцев назад

Still no update on this thing fromLoklik I've noticed.. I am going to have to buy the circuit joy extra especifically for print and cut. WOW. I am still hoping they get this right.

@craftwithfelicia 8 месяцев назад

I’m hoping so as well. Fingers crossed. I I heard some are having good luck with firmware v0010

@judithschwesinger4959 4 месяца назад

When I try to calibrate it, it brings up a print page that has two corners one on the upper left and one on the lower left. When I put it into the machine it says fail to track and spits it out. I am so frustrated!

@craftwithfelicia 3 месяца назад

Newer versions of the firmware only have 2 registration marks. Software version 2.0 Is out and I’m putting a tutorial on it together as well as a new print then cut video to test if it’s working better. Stay tuned.

@juancarlosquevedolusson351 21 день назад

@@craftwithfelicia Looking forward to that updating video, mine is less than a month and still dont see it working properly, I have the version 2 also. But since I am new, I am just searching around to see if anybody has a solution. In fact my version is 2.0.1

@KhimmySedillo 6 месяцев назад

hello, have you solve this kind of problem? i am having the same. no matter how many time i calibrated it but it is still the same. Hope you can help or anyone?? thank you

@craftwithfelicia 6 месяцев назад

I had much better success upgrading to software version 1.9.7 and firmware v0010. You can see in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dZYc8JCkqNA.htmlsi=jnBFZC7Nv_RrxAWR that I was able to get better results. Cailbration is key.

@myrnaparedes3475 10 месяцев назад

Is that just a plain piece of paper to calibrate? I’m sorry I’m just completely new to this and bought this machine a few days ago. 😩

@craftwithfelicia 10 месяцев назад

Yes you can! Make sure you use an inkjet printer. Our LOKLiK can't seem to see laser printed lines - too shiny I guess.

@RadioLaUltimaCosecha 6 месяцев назад

My issues is the following. The print and cut doesn’t not work with Printable Vinyl. But if I use other paper it’s working well. I was making stickers and with printable vinyl never work and I used sublimation paper and cut very well. 😢

@craftwithfelicia 6 месяцев назад

Interesting. I may give this a try to see if I have the same problem.

@RadioLaUltimaCosecha 6 месяцев назад

@@craftwithfelicia Hello. Tech support said loklik isn’t compatible with glossy. The glossy interfere with the laser and cannot read the marks. But with matte is work perfect. Try use glossy to see if this a general issues. Thanks

@LissettetorresG 9 месяцев назад

They have had a couple updates. I'd love another video. Maybe it will work.

@craftwithfelicia 9 месяцев назад

We will give another try and post a video.

@LissettetorresG 9 месяцев назад

Thank you so much. I truly appreciate it. @@craftwithfelicia

@Faith-x1x Год назад

What size can you print and cut on there doing printing sublimation? Thanks

@craftwithfelicia Год назад

Looks like the space between the registration marks is 6 7/8” wide by 9 1/16”. I can’t find anything official from LOKLiK with the exact measurements.

@rheamaebellete3790 3 месяца назад

This is my frustrations right now. Can't seem to perfect the calibration. D is always off at 5 or 6 🤦‍♀️

@craftwithfelicia 3 месяца назад

Yeah…. A frustration for many. I’ve had more success with Sure Cuts A Lot - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YiASRT8EyNA.htmlsi=oz9O88tomvdpPTg_

@supernoochieTTV 10 месяцев назад

Do you know if there is a way to reset the calibration I set mine the wrong direction and now it won't scan the registration lines

@craftwithfelicia 10 месяцев назад

We’ve had some of those issues as well and know the LOKLiK is working to get them resolved. We’ve had better luck printing calibration sheets on our inkjet printer than our laser one.

@robertboudreauxxx 14 дней назад

the program don't look like the Loklik software I downloaded, I'm trying to connect my computer running the loklik software to connect to my printer so I can run the calibration what am i dong wrong

@craftwithfelicia 13 дней назад

The software has been updated since this video was published. Are you able to print to your printer from programs other than LOKLiK? It should see your printer and allow you to make the connection.

@kiddiesplay226 10 месяцев назад

I was told to wait 2 months for them to figure it out. I don't know if it still doesn't work after waiting, will they let me return then? It was promising until I tried to calibrate it before using it.

@TheUNDERPRESENCE 10 месяцев назад

We actually got ours to work, but the calibration was not perfect. We did speak with support via email and they are working on it. For the price, you really can’t beat it. It does everything else perfectly.

@craftwithfelicia 10 месяцев назад

We had print the cut working perfectly today. Check out our latest video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8Kk44iUYEZk.htmlsi=tyrN5jWVXmHKUFPl

@aracelysanchez9849 8 месяцев назад

I bought a new machine got it today but it’s not even reading the lines. So it’s not even cutting. Did it many times but I get an error on it. What can I do

@craftwithfelicia 8 месяцев назад

What version of the software and firmware are you on? Update to the latest which is v1.9.7 software and v009 for firmware.

@sweetnsour321 8 месяцев назад

I got a more serious problem with my loklik. When I print the calibration sheet it only shows the 2 left registration marks. So anything I do with print and cut is just a mess. Sent messages but no answer from them at all.

@craftwithfelicia 8 месяцев назад

We will be back in the craft room this weekend and will do some testing and report back.

@melllmason1546 8 месяцев назад

Mine too, having a nightmare with this 😭

@SublimeMindsSublimation 7 месяцев назад

This machine is a nightmare. I got mine today, and it won't calibrate 😢 only got it today, and im thinking of returning it already!!

@craftwithfelicia 7 месяцев назад

UGH....it has been challenging for many. I've had fairly good luck with ming, but it an be trying at times. The next big software release is supposed to be in June 2024. I'm hopeful we will see improvements. There are lots of people helping each other out on our Facebook group facebook.com/groups/6770205346369071/ but I understand your frustration.

@sylviaeibl9137 2 месяца назад

Hallo, ich habe Kalibriert und es hat alles funktioniert aber ich bekomme das Papier überhaupt nicht wieder ab. 😢 Auch nicht mit dem Schaber. Können sie mir helfen? I am from Germany 😅

@craftwithfelicia Месяц назад

Use the blue light grip mat for paper materials. It works better. I tend to use 24lb copy paper and it’s ok on the green standard grip.

@itsmochi7078 4 месяца назад

I tried calibration, it says failed to track the marks

@craftwithfelicia 4 месяца назад

I’m hoping the software update coming in June will help resolve issues like this.

@tinaj2101 2 месяца назад

What if it doesn’t read the registration marks???

@craftwithfelicia 2 месяца назад

Are you on the most recent version of the software and firmware?

@tinaj2101 2 месяца назад

Firmware v0010

@tinaj2101 2 месяца назад

I’m v2.0.0 and firmware idk how to check I’ll look now

@craftwithfelicia 2 месяца назад

In v2.0, go under Device at the top left, then Firmware Update.

@tinaj2101 2 месяца назад

@@craftwithfelicia firmware v0010

@apriljoylopez1405 10 месяцев назад

i wasted lot of papers in print and cut😢even already calibrated still doesnt work😢

@craftwithfelicia 10 месяцев назад

I was able to do print and cut without calibration and it worked great. I did open up the clamp for the pen and let it remain open while I did it. Not sure if that had an affect or not. Here’s the video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8Kk44iUYEZk.html

@craftwithfelicia Месяц назад

Same...it's unfortunate.