Long travel 670cc Buggy First Drive after wreck! Does wheelies (Pt. 6)

Подписаться 384 тыс.

Просмотров 133 тыс.

50% 1

The moment is here. I test drive my once Chinese buggy with a full reworked rear end with IRS and boasting over 10" of travel. The air cooled v twin sounds mean and revs to 6700 rpms with ease. We tune the cvt for a high stall do some launches and jumps
🔴Thank you for watching!🔴
www.gopowerspo...
CVT system designed for 30hp+
www.gopowerspo...
Engine parts from here
www.performanc...
IRS CROSS-SECTION PARTS:
91-93 Mazda miata 1.6 axles: www.summitraci...
1991- 98 spindles from local junkyard/ebay
-Azusa 4x4 hub 1" straight through (need to be machined down 1mm)
www.ebay.com/i...
(Needs to have a 1.56" OD)
similar ones: www.gopowerspo...
1" axle: www.gopowerspo...
1 9/16" pillow block bearings
1/2" heim joints: www.amazon.com...
Follow me on Instagram @vasilybuilds
/ vasilybuilds
New merchandise: teespring.com/...
For all inquires email me vasily1fab@gmail.com
🡆PayPal Donation Link: goo.gl/ZxbUeG
-----------------------------------------------------------------
🎵 Music used from epidemic sound
Family friendly

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 405

@supermotofeann 4 года назад

that cable thing with the welder is THE BEST I HAVE LEARNED MY ENTIRE LIFE!!!!

@NiTecIndustries 4 года назад

You need to take this Mini Mayhem with CarsamdCameras! Glad to see this running.

@georgesnell2414 4 года назад

so true!!!

@bbroken1 4 года назад

I liked the torque it had with the stock weights in her she pulled harder.

@reggiexp69 4 года назад

stock weight heaver? so more direct power but less high speed. lower weight later power but more top speed...

@jefflarson4117 4 года назад

I agree. It seems to be in the motors torque curve with the stock wieghts and probably more fun to drive off road. With a flexy front that would be a bad ass rock crawler. Great job you inspire me.😀

@rhinorider7328 4 года назад

Hey dude you are getting there the lighter weights are only keeping it like in a lower gear ratio longer its not stalling it you need stiffer springs to make it stall more bro but im proud to see you are way ahead of some of the other people i see doing stuff like that im about to start building a buggy like that in a few months for my son im gonna use a 700 king quad engine an make it 4x4 so he can go where we go on sxs

@deborahchesser7375 4 года назад

It needs a 4 spd tranny at least, I hate belt drives they don’t last

@sender6994 4 года назад

To help the clutch slipping get a stiffer secondary spring. It will drop your rpms a little bit to get her in the sweet spot and it will really help the slipping

@kartnerds 4 года назад

That 670 is a beast! Rear IRS is so sick. By far the best Chinese buggy build I've seen! Turbo is gonna be nuts!!!!!!!

@homemade_madness 4 года назад

Nice buggy, great sound🤙🏻, i also like the lexus at 6:44🤩

@flatlineryan 4 года назад

HOMEMADE MADNESS and the g35

@koppletonclopp7952 4 года назад

This thing needs a turbo. I've seen these 670 v-twins turbocharged and their sick.

@johncholmes643 4 года назад

*they're*

@NIGHTMARERICA 4 года назад

They make great superchargers for them.

@averagecarguy420 4 года назад

Since it has a “crazy reworked rear end” 0:24 you should name it Kim Kardashian

@jewboy761 4 года назад

Seriously? Change your thinking man.

@averagecarguy420 4 года назад

Garrett Moore ever heard of a joke? Loosen up buddy.

@Mikefestiva 4 года назад

Nice it’s alive! It looks like the ride is nice and makes good power!!! Thanks for posting 👍 Those snail chain adjusters are really simple and work great.

@shancyroesner9212 4 года назад

The only difference between this and a side by side is that this sounds WAY more BAD ASS 😎

@austinisaperson6093 4 года назад

LØx Shansway also 4wd in some cases... (that would be really cool Vasily...)

@nathankaiser5592 4 года назад

LØx Shansway and a side by side is way better 99% of the time. Also have you ever heard a can am maverick x3 turbo with a straight pipe and open headers because that sounds way better than this Lawn mower motor.

@shancyroesner9212 4 года назад

Nathan Kaiser nothing sounds like these old pushrods

@ourlifeinwashington4114 4 года назад

I love to watch you build and work. So many guys try to do it like B is for build and all he does is talk talk talk and then he shows a tiny bit of work and the vids over, mani hate that. Your a master builder brother I'm so impressed with the work you do. Keep it up.

@VasilyBuilds 4 года назад

really appreciate the support

@Spec_D 4 года назад

YES! THE BUGGY MOVES! awesome build man.

@mrnautilus 4 года назад

Been looking forward to this for months! I've been looking for an engine to use for a buggy build, looks like I'm going with a built 670!

@frankyalvarez7160 4 года назад

This is not very cash money of you.

@liamwatts8597 4 года назад

I'm glad to see you sending it after getting healed up!

@mattburns545 4 года назад

The crash was the first video on this channel that I watched. I’m glad to see the progress you’ve made. Stay safe and keep enjoying life to the fullest.

@GoKartsorGoneFishin 4 года назад

I love the longer videos and that thing looks so good!..keep doing what your doing! 😀🤜👍

@kyledus4609 4 года назад

Drilling with your impact driver... something you would catch me doing if no one was looking. Haha

@Tracks777 4 года назад

lovely video

@csiguy6 4 года назад

"Give it the full beans" .... I love it, that needs to be on a t-shirt! I think the buggy has a lot more power and speed in it, you just have to get everything set up just right!

@getoutmecar2940 4 года назад

U are an amazing RU-vidr you’ve accomplished so much in these past 7 months

@getoutmecar2940 4 года назад

@indyjones3287 4 года назад

Was watching you drive the Honda, and was like, "That looks like the goonsquad lot!". I enjoy your builds and content; keep up the good work. Cheers

@mahlonpeachey7667 4 года назад

That thing is awesome sounds like a real rock bouncer

@gragra556 4 года назад

Man i am amazed at your skill level for your age, also i am amazed that the cops are not camping out in front of your house waiting for you to come rolling out, ha ha anyway keep on wrenching & racing.

@dorranrobinson6207 4 года назад

That thing sound so great..

@richardgreen7811 4 года назад

Great work Vasily, as always. She is running very sweet. The tires look great.

@The_one_alah 4 года назад

Awesome suspension

@dorranrobinson6207 4 года назад

Ur doing a good job youth big up from jamaica...❤👍👍👏👏👏

@theunseen8054 4 года назад

I've watched this vehicle progress for sometime now. I'm glad you're ok too.Stay safe.

@mykee426 4 года назад

That thing sounds mean af! Love it

@joetupou154 4 года назад

peeking through the curtain" there's Vasily and his toys again"....puts earmuffs on😂😂

@williamcallaghan5271 4 года назад

Haven’t finished the video yet but I’m glad to see it’s a good bit longer.

@motomule 4 года назад

Cool beans!! Awesome to see it finally rip!!!

@carlosgarza8441 4 года назад

Dannnggggg that travel is sick, great job man keep doing your thing. 👍🏼

@jordanpanich 4 года назад

So rad! Nice work, man!!!

@outbackboy128 4 года назад

I wanna see that turbski on that buggy suspension can wait 😂

@fredpinczuk7352 4 года назад

Nice build, well done. Watch that seat belt drag onto the pulley (11:58). Be safe.

@ils360 4 года назад

That's awesome man!!! I LOVE the build!!

@bryanmayes9234 3 года назад

Sick man. And yeah the yamaha XYZ is a beast with a gear drive trans and actually has a nice launch control. Like a stock 2step.

@TheWorkbenchPT 3 года назад

Awesome build, but remember that safety comes first! Look at shock bolt at 12:05

@roxxxstarmania7670 4 года назад

Video came in just in time for lunch!!! Good video to watch during it

@robinbuddha 4 года назад

Hi guys!! I'm watching your video from Nepal. I like your all videos so much.👍👍👍

@emmettcarr2988 Год назад

Love that cable trick man.

@robrobitaille4235 11 месяцев назад

Not gonna lie, that thing sounds awesome!

@TRX450RVlogger 4 года назад

They used those old Chain Tensioners on the old XR250R, and XR400 and so on. Those type of tensioners been around for a long time. Also BE CAREFUL with some of those CVT Variator Clutches, some of them have a very Powerful large spring inside of them that if you take off the large Nut have been known to cause really bad trauma. Great stuff bud!

@ParadiseAtvTrail 4 года назад

I have been watching all of your videos and am exited for the this one keep up the good videos. It’s good motivation for my own builds.

@dorranrobinson6207 4 года назад

Yoooooow to much power...!!!!👍👍👏👏👏

@GregoryBrown-fe5js 4 года назад

Nice one man you are on a roll.

@richtracy8336 4 года назад

Keep up the good work you remind me of the way we grew up building some pretty crazy stuff.hope you have a kill switch this time.luv the vids keep them coming.

@07TriggerHappy 4 года назад

I’d say front suspension and then turbo. Just because the rear is super nice so it’ll be more benefit. But I’m down for whatever you want man. I dig the videos!

@2wheelLove 4 года назад

i cant wait to see the front end man. one of my fav builds on youtube man!

@petekim6755 4 года назад

As someone else said, u need stiffer springs in the primary clutch! Ths is how u adjust the engagement rpm and allow it to rev up a bit more before engagement, it'll launch way harder also!!

@justlive56 4 года назад

Man that's one bad ass buggy/go kart! Keep the muffler on sounds good, and keep up the good work. Love this build

@Glenda-rg4pj 4 года назад

That exceeded my expectations! Nice work! 👍

@driveitbreakitfixit7496 4 года назад

Love the longer video dude! Great video like always

@garyburbank8895 4 года назад

Bad ass side by side buggy

@peterw8690 4 года назад

Wow some power fantastic keep it up bro.

@tazyt3388 4 года назад

She's a beast mate glad u finally got to thrash it .mite I suggest adding some roll pads to the area where your legs are guna smack about if you crash ,might save more hospital time stay safe mate cheers

@ethansouder 4 года назад

Such a good guy

@dropsofink1336 4 года назад

Great video! Glad your leg is feeling better!! Next video I vote for seeing the front end mod. What shocks do you recomend?

@robinj357 4 года назад

Get that front end looking like a Talon. Great job that thing looks awesome

@kswan4235 4 года назад

I use to have a little buggy similar to this, 250cc though. I put a performance clutch on and put the weights in for more top speed, ported and polished head, bigger carb, and exhaust. I don't remember what brand of clutch and the exact weights I used but I would definitely recommend the weights for more top speed instead of acceleration especially with the engine you have in yours. You might loose a little acceleration right off the line but really makes it feel faster out of a corner and pretty much everywhere except from a dead stop. Cool build!

@its_robbietime1333 4 года назад

Can’t wait for this boi to get a turbo

@jamesmac2513 4 года назад

That beast realy got a tooken!

@jasonscott2759 4 года назад

Longer vids is my vote, awesome stuff bro!

@joseffinklematter6256 4 года назад

You gotta make that thing street legal

@TJ-ux6ng 4 года назад

Nice build awesome video 👍

@Drunken_Hamster 4 года назад

Built 670 makes in the range of 50hp and revs out pretty good. Straight pipe idles like a Harley and sounds like a dragster on ripp. You should take this bad boy to CarsandCameras' mini mayhem event in North Carolina. Reply to me and I'll get on desktop later and give you the link to their RU-vid, Facebook, and the event page.

@FutureEnjoyer 4 года назад

I was watching you rip the x3 and I was like man that looks like the goonzquad x3

@andybaker5787 4 года назад

Keep up the good work

@brockviau7832 4 года назад

Look great

@NiteHawk861 4 года назад

That thing is bad ass! 🤙🏼 you should build a water proof box for your cvt for serious mudding action 🤘🏼💪🏼

@stinkintoad 4 года назад

This kid lives near Goon squad, he has a tractor rig in the front like goon also. Must be a Tennessee thing. And he is super talented like those guys also

@BruceLyeg 4 года назад

That looks like a lot of fun

@Lylo-mj8ek 4 года назад

Nice job! Good on ya Man! Peace.

@theproudONE92 4 года назад

Honda has been using that chain tensioner or cam tensioner as you called it since the 90's on the XR650L

@coteye8526 4 года назад

Mussels alot of motorcross bikes use them!! Is he daft or summit

@mxrider2strokebraaap54 4 года назад

Man she looks good 😍

@tshupp72 4 года назад

Excellant built ... get the front done before you go turbo. Also I would have kept the 26 in on to get that power to the ground better. ....get some limiter straps for suspension as well ...okay I'm done ...super Impressed

@BakersLawnCare 4 года назад

Great video really enjoyed it keep up the amazing videos

@redneckpapaw3683 4 года назад

Great job. That thang is awesome.

@tom4od 2 года назад

Nice video. You should get some drone footage of you driving your creations. It would take your videos to the next level

@simocreations 4 года назад

Both. Got to turbo it man

@leightonchapman9581 4 года назад

Turbo looks awesome, but I would like to see front suspension in the next video.

@marcosurrecio92 4 года назад

Man you really need atv air suspention up front... everything else in the back just looks perfect

@aaronfarrin4057 4 года назад

Awesome build I don't know if you noticed it or not but I coulf hear it before It started in the video the torque converter and your drive pulley are hitting each other

@funnerthanbefore4947 4 года назад

i knew you'd get back on the horse!!!!!! proud of you bro! your gonna need EFI with that turbo....

@agent0444 4 года назад

longer ... but not long enough bump them numbers up by at least 5 minutes😂😂🤷🏼‍♂️

@stonedfrosty448 4 года назад

Love this build!

@ACplanet 4 года назад

what a great build! turbo? :D +1 for the longer videos

@voided76 4 года назад

Vasily! It's time to get a budget AMR500 supercharger off of ebay and throw another 25-40hp at that thing. bonus points for rollbar mounted intercoolers!

@shakobutika5981 4 года назад

love these guy

@MaxMax-vu5dw 4 года назад

yea buddy finally got her done

@Chuffin_ell 4 года назад

That rear suspension is doing exactly what it’s supposed to by absorbing the engine torque as it squats when you launch. Stiffen up your shocks and see what happens...

@mitchlec8916 4 года назад

I am curious about your drivetrain, how has nothing snapped while turning on cement? Your rear wheels are technically a locked diff no? Shouldn't one of the tires drag a little when turning on cement? I'm just puzzled how the stress on the components haven't resulted in something breaking. Love the channel btw!

@jacebigelow 4 года назад

Great video !! Sounds like a Ducati ! What is the muffler you used ? I like that you made your own header, tensioners, and thank you for sharing the tip on weld-cutting the throttle cable. Wonder if plasma cutter would do the same trick ?