lost wax technique jewellery || without bournout oven 

make sure the heat is evenly distributed on each side of the tube

@@JNDjewelers thanks bro I'm planning to use my propane furnace for this so the heat distributes evenly you really proved everyone wrong and showed this is possible man amen to u

Thanks. . Around 50 - 60 minutes

@@JNDjewelers Thanks! long time! I gotta be patient! xD

I usually 30 0r 40 minute. . .make sure that tube around 550°

@@JNDjewelers Thanks!

i use burnout never master, i have a headache thinking about it

@@Fidcincin terus coba bang..nanti lama2 bisa. . Saya aja sering gagal

@@JNDjewelers ok mas terus mencoba , wax saya ingat sudah 30 batang sudah habis hasilnya tiada, mas bgi whatspp nombor mas.

About 40 minutes

@@JNDjewelers Thank you! Did you try other castable resins? Which ones also can be burned out with open flame? Which are the best to your opinion?

I've used phrozen wax-like castable resin for LCD printers. this is also good. but I've heard that this resin also has to use a 3d printer brand phrozen. If you use a 3d printer machine with another brand, the settings must be reset. but I prefer to use BLUECAST X-ONE resin. This is for DLP 3d printers. .

@@JNDjewelers Thank you!

@@JNDjewelers What temperature is at your workshop? Do you preheat this resin before printing?