Loudness Targets for Mastering (...It's not what the streaming services tell you.)

Подписаться 141 тыс.

Просмотров 24 тыс.

50% 1

How loud should your master be? It's a common question, but the best answer depends a lot on your genre, production style and goals.
Streaming services like Spotify would have you believe that shooting for -14 LUFS in your masters should be good enough, once their automatic volume normalization does its job.
But most producers working in popular styles of music find that this target doesn't allow their music to stand up to their favorite releases on playlists. And as they investigate further, they find out that practically none of their favorite records are this quiet.
What are some better real world targets for mastering levels? Justin Colletti advises.
Spoiler alert: Some good "safe" targets for mastering are:
Pop and Rock: -13 to -10 LUFS (possibly louder)
Hip Hop: -10 to -8 LUFS (sometimes louder, sometimes quieter)
EDM: -8 to -6 LUFS (sometimes louder)
When, why and how should you go outside these ranges? And how can you get loudness without squashing the life of your mix? All that and a lot more in the video.
►See free audio tutorial videos with Justin here:
• Justin Colletti Videos...
►Get Mixing Breakthroughs here:
mixingbreakthroughs.com
►Get Mastering Demystified here:
MasteringDemystified.com
►Get the free mastering workshop:
sonicscoop.com/Mastering101
►Get the free mixing workshop:
sonicscoop.com/MixHabits
►Win free stuff at
sonicscoop.com/contest
►Subscribe to the podcast or leave a rating and review here:
Apple: podcasts.apple.com/us/podcast...
Spotify: open.spotify.com/show/0gEpIPf...
#mastering #loudness #lufs #mixing #-14lufs #audioengineer #musicproducer #perspective #audio #recordingstudio #justincolletti #sonicscoop #colletti #podcast

Видеоклипы

Опубликовано:

24 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 161

@liviowuthrich9709 2 месяца назад

I usually don't comment videos but this is probably the best video I've seen on loudness. Great job!

@VKJ85 2 года назад

Go nerdy, go technical cause it is not time wasting. All information is a blessing. The more we know the merrier.

@MaxRayMusic 10 месяцев назад

amen

@BLACKSYNTH Год назад

Took me sooo long to get loudness right, Like over 10 years. It’s such an accumulation of things it’s hard to teach someone how to get Loud clean punchy mixes as it stems back to choices you make early on many different things. Gone are the days I used to throw an L2 limiter on the master bus and push it 😂. Now I generally get pretty clean -7 on rock and -6 on dense electronic without distortion or pumping. I never thought I could be able to do that even like a year ago and can now dial it back a bit to be safe.

@jyro5924 3 месяца назад

That's reassuring AF to hear.

@rmv9194 2 года назад

Thanks for this video. After uploading some songs to spotify, which I mastered to have an average LUFS level of -14 o -13, because they normalize each track to that level anyway, it was still apparent my tracks were a little bit lower than many other commercial tracks. I looked everywhere for videos explaining why this happens and how to work around it but none were found. They just would stick to the script "everything is normalized to -14 LUFS playback so you dont need to compress more your track" without addressing the obvious fact that even with normalization many spotify songs have different perceived levels. You are the man.

@phadrus 2 года назад

Would love a metering video. Especially how and what metering to use during gain staging, before and after analog plugins, setting static mix levels, bus processing, and mastering, etc. Also, would love your thoughts on managing and optimizing crest factor for increased perceived loudness and how to measure and monitor that properly. (Sorry, that’s a lot of stuff, but would be very helpful-this stuff gets confusing).

@WhattheHelltv 21 день назад

Agreed! Justin, this would be very helpful!

@MaPa60 2 года назад

Thanks Justin, awesome episode!! It”s really helpful information. No. 1 mastering video on YT 👍

@g_fx 2 года назад

I really appreciate the detailed, clear, well edited explanations. Thank you.

@maxmileski1248 2 года назад

This was, once again, most excellent!! Thank you Justin!

@onurpekdemir 2 года назад

Thanks so much Justin! Awesome information ... I love pretty much all of your Videos that I've seen so far.

@MarvelJAM 2 года назад

Probably the best video you have ever posted about music production. I love the honesty, bravo. The streaming services need to do better loudness analysis before penalties matter. Obviously, distortion for a music audiofile is outside of all this conversation.

@davejohnsonmusic 2 года назад

I work on mainly rock stuff and I tend to land somewhere between -6 and -9 LUFS, even with a lowered ceiling on the limiter. I really don't think about it too much. I use my ears to what sounds best for a particular track. I make mix/mastering decisions for my music, not the streaming platforms. Future-proof your work... these platforms will undoubtably change their recommendations down the line.

@realzneo 2 года назад

Hey Justin! Thanks for talking about this stuff!! Good stuff!! Please don't be afraid of going too nerdy and technical!!

@grsfhhytff 2 года назад

The more info, the better. WE ARE THE NERDS.

@23Darrus 2 года назад

Thank you for saying it how it is! I agree. It changed my life when I just started compressing and more important *limiting* my masters to around 8-10 LUFS

@StratsRUs 2 года назад

I loved this.Thank you for the nuanced explanation.Great ! I think you explained things just right for me.

@kenalva7769 Год назад

This is incredible advice. Thank you.

@23Darrus 2 года назад

I 100% need more of this

@-------K------- 2 года назад

Thank you for this great episode! 😍🤗 Very well done! Super useful information you packed in there. And I wouldn't mind if you'd go even more technical. I would like that! 😁

@perhoier2881 2 года назад

More technical and nerdy. Don’t hesitate. And thanks a lot. Message get’s through “loud” and clear.

@danielkisel5661 2 года назад

Thanks Justin, please go full nerd mode on this, I think it's really important but not covered whole lot on RU-vid in such details!

@SouthsideWilly 10 месяцев назад

I've been trying to mix and master my first track after previously outsourcing it and having real problems with getting it to what Spotify recommends without ruining it, so this is just what I needed to hear! I'm going to revisit it with just my ears and a reference track and try uploading it to see what happens...fingers crossed!

@MrJumboblimpjumbo 2 года назад

This was lovely. More please! Maybe with a mini white board to illustrate things like intersample overs?

@josephramone5805 Год назад

Super video. Thanks!!

@SonicScoop Год назад

Awesome! Thanks for watching. -Justin

@JIMIVISION 8 дней назад

Very helpful! Thank you.

@noemiejett4515 2 года назад

Yes we need a lot of technical data, it's the core of our jobs!

@akumusik3582 2 года назад

Great Video🎼🕊️

@FredImhotep 6 месяцев назад

Thank You

@GeorgeAmodei21 2 года назад

Thank you for making this Video on this Subject. ☺️George Amodei

@seamasmanly 6 месяцев назад

Yeah, get nerdy, get down tonight 🎉 Thanks 😊

@mykal92684 2 года назад

thanks for this. i've asked this question many times and could'nt find a real answer. all i found was -14 and im like WHAT. Then i found that EDM -7 and nothing else until this with -8 for hip hop. thank you. i was getting to -10 and it just didnt quite feel as loud so now i know.

@nickhindman 2 года назад

This topic has become almost ideological, which makes it hard to find practical info. Thanks as always Justin for the clarity.

@nickhindman 2 года назад

...and definitely, a similar practical video on metering from YOU would be grand, for the same reason!

@mthomas1091 2 года назад

Good length & explanations 👍 (but yeah, get nerdy! :) Are there downsides of sending to Apple/Spotify at -2 peak? Like, can’t you just give a +2 (0db) copy to clients etc & send the -2 peak to Apple? Does it sound better/worse? Is it not just normalized?

@basscut Год назад

This was great and confirmed some of my observation. How would you master in general ambient music?

@hajiipop 2 года назад

thank you

@tortugulaproductions 2 года назад

Please do an episode on metering! One of the less sexy sides of mixing/mastering that rarely gets talked about and I am 100% here for it. Also, I certainly can't call myself a professional mastering engineer but I have mastered a number of projects for friends and I usually deliver two masters. One at -1.5db peak level for streaming and one at -.2db for CD. I didn't arrive at these peak levels through trial and error, but through a recommendation from Eric Valentine which I figured is safe. Is delivering two masters necessary? Also, do you have limiter recommendations? I have been loving the Brainworx XL V2 personally.

@RiffMusic1970 2 года назад

Interesting. What would be the disadvantage to delivering -.2 to a streaming service?

@tortugulaproductions 2 года назад

@@RiffMusic1970 Honestly, I am not totally educated on this so don't quote me on this. But I think it's to leave headroom for the intersample peaks that may become problematic when converting the file using different codecs. So a track with -.2db of headroom might clip when Spotify or whomever converts it to their codec. This is a problem. So leaving 1.5db of headroom gives room for digital services to do their thing without negatively affecting the music. I don't know if this is 100% how it works, but this is how I understand it. I may be mixing and mastering buzzwords, though. If you want to see Eric Valentine's video I referenced, watch the episode on his channel about mastering. I think it also leaves headroom for your client to convert the file for themselves. If they want to create mp3s of their songs they can do so without introducing artifacts from the conversion process. I think

@EndlessMeece 2 года назад

Please bring on the nerdy esoteric metering episode.

@trv503 5 месяцев назад

This is a great video on LUFS and mastering loudness. My thing is making sure that my mix sounds balanced b4 I go to my 'My Mastering mode". I've been using a True Peak mastering VST that has an Output Dim adjustment. Maybe a mix example where you then take that mix to master it would be cool.

@yrkobeats8966 2 года назад

Vary helpful!!!!

@10ZOBEATS Год назад

I mainly mix hip hop and RnB. My clients typically like a super loud mix so I tend to get between -10 and -6. I use the god particles limiters and find that it doesn’t complete squash my transients and dynamics as much as what I used to use, the L2 limiter. Gain staging helps tremendously

@andrewkerridge2565 2 года назад

Theres no rules with mixing and mastering! That’s why I aim for -60 LUFS, crank up my amps and bliss to the hisssss.

@J77199 2 года назад

Lol

@ryde2012 2 года назад

😁

@GeorgeAmodei21 2 года назад

You can go deeper on subjects. Thx again.

@deviantmultimedia9497 Год назад

I've slowly begun to realize... Justin is the TRUTH

@guthhalf5484 2 года назад

Please do an episode on meters. Would love your common sense explanation. Thanks

@ThisMichaelBrown Год назад

I guess im a DR nut....I just did a mix at -17 LUFS and I really like the space....so fun to crank up those wide DR mixes...I trust folks to use their volume knobs...probably controversial I know. ;) Nearly every album ive spent a ton of time listening to had relatively high DR's.....I like to hear things really bounce around. Thanks for the great content!

@easyvelvet77 5 месяцев назад

Thx man, clear and well to the point. Two questions (between a million others!): - if doing a mastering level of a track with "True peak" meter ON, do we still have a to go for the -1db "safety zone" for streaming services (recommended)? I know the inter-sampled peaks mostly can bother us adding distortion when transcoding to lossy formats. - If the LUFS reading is above -14.0 for a master, then Spotify wants a True Peak value under -2.0. But what if we go -0.5? Any penalty from them on this? For the LUFS i get i they normalize, but what about the "True Peak reading"? Thx for your time and your video! And yes i think you can go more nerdy! Gently...

@YoungNino2017 2 года назад

What makes me crazy about spotify doing this is tracks that are more bass heavy will always be quieter... songs heavy in the 1 to 2K range will appear louder. I've reuploaded my new album 3 times now trying to get the perfect -14 and true peak -2 version for spotify and it always just seems quiet

@IvanLopeztruco 2 года назад

yes get technical!! excellent video.. You should talk about Dithering too please!

@SonicScoop 2 года назад

I got you! Right here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VbRao4yHJG8.html

@geniustracks9213 2 года назад

Justin I've got questions if you get a shot on bouncing things down after the Master. I've seen some casts on dithering and I sort of get it...but are Mastering engineers saving all these copies of single songs? Like dithered, not dithered, WAV, mp3...and do you have a system for the way you name each version. Thanks for all of the content its fantastic!!

@johnb6723 2 года назад

.wav files or .flac files are going to sound the best, because they are lossless. .MP3, .ogg and .aac are going to sound less good because they are lossy formats.

@geniustracks9213 2 года назад

@@johnb6723 my question is more so referring to playback systems and such...like aren't tracks for CDs dithered more than tracks for streaming...for example(I thought I heard that, but I'm certainly no expert hence the confusion!)...and are engineers saving them in all these different ways or how's that work

@wicsiow 5 месяцев назад

Yes please, go extra nurdy into technical derails of mastering & related subjects, it's all good stuff.

@bradferguson9840 2 года назад

Fantastic explanation and example ranges - thanks! Re a 'safe' range for jazz, can I ask what you would suggest?

@radishmonster419 2 года назад

Probably between -14 and -10 or quieter depending on the style of jazz.

@davidasher22 2 года назад

I need more technical and nerdy PLEASE!!

@massapower Год назад

Problem with streaming platforms, they butcher the audio quality and let's face it, too many Dummy phones playing thru their speaker and many don't even care about quality . But KOODOS to you from a Musician who cares about Quality WAV😁👍🏻

@chrisfeatherstone9691 Месяц назад

I measured a few songs off of the new blink album. I think they won the loudness wars. I measured -3 to -4 lufs! Everything was square waves off and I can hear digital distortion.

@amikojean 5 месяцев назад

I'll take technical and comprehensive, aka nerdy, over under-educated any day. Thank you!

@SonicScoop 5 месяцев назад

Thank you for tuning in! -Justin

@barneymiller5488 Год назад

Great video. Two questions: 1. This -14 to -8 LUFS is a what the LUF meter should read POST mastering, not pre, correct? 2. How does the "Loudness Penalty" play into this? I've mastered stuff at -12 yet the Loudness Penalty website says i'll get hit by up to -4? Any answers would be helpful. Thanks!

@larrycavallucci3258 Год назад

I only presently work on my own songs, none of which fit into the very small Genre List used in this video. Maybe some of mine could be squeezed into the "pop" area, but it would be nice to see what the "blurred Genre of Country" would be an acceptable level, and no one ever seems to bother to talk about worship/CCM areas. I use two ADPTR plugins, Metric A/B, which is THE BEST I have seen (you can also upload 16 reference tracks), and its Streamliner, for comparison which also covers Codec, , along with Waves WLM Plus 5.0 loudness meter. Since I have Studio One Pro 5, it has a super duper Project Page module, the ONLY DAW with a built-in mastering module, in which you can tweak a song by going back to the original track to do that for separate tracks. It would be SO NICE if all these services would come together and choose ONE STANDARD LUFS.

@JuanMotta 2 года назад

Go nerdy, thanks !!!

@sagecarter2368 2 года назад

On that last question, I definitely prefer technical and nerdy, but sometimes it gets ahead of what I know and needs to be rewinded a bit lol

@Zugo 2 года назад

What level of mixdowns do you usually get sent in for mastering, what level would you recommend?

@JohnnySpanish9 Год назад

What level should my master fader be at before I master.. should I bounce-3db on the output fader 🎚 or leave it zero ?

@carlos-ni4hn 2 года назад

Yeeessss sir this a hard video , yo bro nba youngboy drop new albun ,u can do a mixing masterclass of any song ? 💗💗💗💗 love too this channel

@isoladellerosetv 2 года назад

Great video. At the end, i didn't understand: you recommend setting the limiter with the true peak of -1 for not extremely loud music (Pop and Rock: -13 to -10 LUFS)? I make rock...

@SonicScoop 2 года назад

With a true peak limiter, you should theoretically be able to go all the way up to just about 0 as it is catching the intersample peaks. Though may as well set it to -0.1 I guess? If you're not using a true peak limiter, I usually find that setting the output to anywhere from -0.4 to -1.0 will be enough to keep the intersample peaks from causing any meaningful issues, depending on how hot you are mastering. This does require a little bit of trial and error. A tool Like ADPTR Audio's Streamliner can help you determine this by looking at intersample peaks and hearing what the codecs will actually do to your master on streaming. Hope that helps! -Justin

@isoladellerosetv 2 года назад

@@SonicScoop I appreciate a lot your answer :)

@FataMorgana-Official 6 месяцев назад

My thoughts on loadness for mastering. Use your ears and make a master that sounds as good as possible and make it as load as you possible can. How much you should compress and if you should use a limiter at the end of the master chain really depends on genre (the more you use compression and limiting, the loader the master can be). I recently remastered a recording I made in 2001. I just used my ears and made an analysis after the mastering was done, it ended up around -9 to -10 LUFS, which somehow is the "normal" level for a rock/hardrock record. Jazz is lower, metal is higher, but the important thing is to be in se same ballpark as your competitors. The band Fata Morgana is not a metal band so I think I did it right. Feel free to listen (just click on me). If you like guitar-driven hardrock with more complex arrangements but still melodic, you should defenetely listen. Remember, your ears are going to tell you whats right. not numbers! // Peter, guitarist in Fata Morgana

@NanoverseProductions 2 года назад

Idk when I start to get to -9 Lufs it feels gross. I prefer my mixes to be around -11. At least that's what works for the music I'm making

@RETCHED-METAL Год назад

The most comon -8 Lufs cause they will mess it up if you try to turn it down and if you just stay with-8 LUFS You will be in the industry standard so they tell me besides why would we make different levels for different platforms. Just bang it but make it clear I say.

@epenington Год назад

Quick question for anyone out there... I've worked with 3 different mastering engineers now and all 3 mastered my tracks to right up to 0.0 db. They were all great at their job and I'm sure they knew what they were doing, but can pushing the peak to "0" cause some distortion on some playback systems? I thought -0.3 db (or -0.2 or -0.1db) was more common. Anyone have any thoughts on this or have any info? Thanks!

@michaelruebusch2275 2 года назад

Do you know if it's possible to master audio for delivery to streaming services like Curiosity Stream in Premiere or Resolve? I would love to find a good tutorial about that process. Thanks for the help.

@ProducedByAGO Год назад

-8 or -9 is def the sweet spot for me ..... mainly do rnb pop style music

@calebneff5777 2 года назад

How do you sort a mix within a genre that requires a lot of low end? I'm making a doom metal personal project, and one of the things I've run into is that when the low end sounds appropriate for the genre, it's destroying my master bus compressor. With guitars tuned this low, it's basically like having 5 basses in my mix once both sides are double tracked. I'm making space where I can, but sometimes the soup just sounds better. Is the solution to just not compress the guitars at all and ride the faders?

@stefanfq6234 2 года назад

Would be nice to talk a bit about how to use K system meters while mastering or mixing.

@larrycavallucci3258 Год назад

Stefan, there are a number of YT vids on that subject. There is also the EBU standard now also popular.

@na_der Год назад

24:34 bro, mastering is all about being nerdy! lol Thnx a million for this invaluable video!

@crushprorecordings3972 Год назад

Go as nerdy and technical as possible… There is no peak level on knowledge!

@jarrodottinger3 2 года назад

Hey, Justin! You did a podcast a month ago arguing against the need for super high resolution audio, and I totally agreed with your stance. However, I was thinking while watching this episode that perhaps using a sample rate of 192kHz or higher might actually help to prevent inter-sample peaks while mastering due to a more accurate representation of the wave shape. What are your thoughts on that? Has anyone done any research on that?

@SonicScoop 2 года назад

Hey Jarrod, that's a fair question! Using a higher sample rate wouldn't totally eliminate this issue, but maybe it would decrease the magnitude of it? I'm not sure. But it's plausible. Would have to look into it. That said, there is already an option to basically do this, regardless of what sample rate you are working in: "True Peak" limiters use oversampling in the detector circuit to help eliminate intersample peaks. Of all the ones I've tried so far, I like the sound of the bx_limiter True Peak. But other brand's limiters will often have this mode. They do tend to sound a little different in their True Peak mode. You'd still need to address the intersample peak problem with a higher sample rate, but maybe they wouldn't be quite as high? I'd really need to do more research and experimentation on it. But honestly, it's not that big of a deal either way, because just turning down the peak level slightly or using a true peak limiter) tends to fix this without issue, and would still likely need to be done at a higher sample rate anyway. Hope that helps! -Justin

@jarrodottinger3 2 года назад

@@SonicScoop Thank you for the in depth response!

@guthhalf5484 2 года назад

More is better. Even break up deeper subjects with part one and part two so everyone is happy.

@oscarvgaa 2 года назад

I'm all about the nerdy stuff. If I don't get it, it will push me out of my comfort zone when I try to understand it.

@robshrock-shirakbari1862 2 года назад

Hi, Where are you getting your client references? Are you using Spotify (which has been modified) are you using the commercial CD, digital download? If Spotify, are you normalizing the file to get a proper master equivalent? I would think the reference needs to be at the actual level to have any relevance.

@SonicScoop 2 года назад

Yes, you used to be able to turn off volume normalization in Spotify. Not sure if you still can. But you can definitely turn it off in Apple Music and other places. That is important. It's another reason RU-vid is not great for referencing. -Justin

@puvaneshganesan 3 месяца назад

For Me Also Same -10 To -13..Because That Lufs Give Best Volume Sound..

@murraywebster1228 Год назад

The loudness of the master should be THAT which is RIGHT for the song,the and the genre. IF THIS MEANS WHATEVER STREAMER WILL TURN IT TDOWN, SO BE IT. The recommended True peak level is the only value that you should adhere too for the different streamers.My experience is that the higher the sample rate and bit file that you deliver the file, the better the sound quality of the song when it appears on the platform, mix and master for for what what believe is right for how the song and bedamned for what the streamers do.KEEPING THE SONG AND INTEGRITY IS THE MOST IMPORTANT THING, MIX AND MASTER FOR THE RIGHT SOUND, if the result comes out very high then ask yourself if you wanted it so loud and maybe let it breath, look at you average LUFS afterwards and make decisions. And Try FIDEF, THIS CAN GET YOUR SONGS TO SOUND BETTER AND ENERGETIC WITHOUT SO MUCH COMPRESSION OR LIMITING ( My little tip of the day…..

@mattymenck 2 года назад

Intersample Peaks: I have found out that most of the hot mastered hit records showing inter sample peaks up to +4dB. Looks like nobody in this field taking care about any headroom below zero and nobody uses true peak limiters. What do you think about that ? Could show some examples if you like.

@J77199 2 года назад

True peak is meaningless since once it hits the converters it cannot exceed 0. In the digital world headroom is infinite so meters reading above true peak in the daw are ignored by 99% of professional engineers

@SonicScoop 2 года назад

Yes! In the real world, you can have some significant occasional intersample peaks and not have an issue. However, if you have a lot of very hot intersample peaks, it can potentially cause issues when converted. Listening through potential end codecs with a plugin like the ADPTR Audio Streamliner or the ones made by Nugen Audio can let you know if this will actually be an issue. After mastering hundreds upon hundreds of projects per year for the last 8 years or so, there has been exactly one time where we heard new distortion added after conversion occurred and decided to re-upload the album. But it made it so that I always check now! Simply lowering the peak level on that record from -.4 to -.8 did it. It's true-not a lot of people use true peak limiters these days, because most limiters sound better in their normal mode to most people who use them. HOWEVER, the new bx_limiter True Peak, only has a true peak mode and sounds really good that way. Its detection circuit is a bit different than the norm, and I've found myself starting to use it for hotter material. Very nice. Hope that helps, -Justin

@mattymenck 2 года назад

@@SonicScoop Thanks Justin, great reply. I just wanted to point this, because almost every RU-vid ”engineer” says: True Peak Limiting is a must and even better bis 1dB of headroom. But if you discover current modern chart music, nobody cares in the real world. I have tested the bx TruePeak Limiter as well and compared to FF Pro-L. In my cases Fabfilter got me better results. So i´m not a big fan of the bx Limiter, but i like the Sonible Smart Limiter. This one works quite well for me. Cheers

@michelrostaing2729 2 года назад

i made some tracks mastered at abbey road studio for an album and they were showing +0,4 db true peak !! i sent the engineer a message, he answered me if it sounds good to your ears don t worry about true peak and it sounds amazing so... and i watched a video too about mastering with the engineer who mastered bad guy from billie eilish and he said: never use a true peak limiter... they all sounds bad... so in the real world nobody cares about true peak because i think that if true peaks stays around 1 db or maybe 1,5 db i m not sure that we can hear any difference.

@mattymenck 2 года назад

@@michelrostaing2729 that's right Michael, only most of the RU-vid guys cares about true peak limiting. But It does not reflect the real world ;-)

@GTSongwriter Год назад

I always just shoot for -1.5 on the DAW. Going over 0 distort music. None of the streaming sites have distorted my music by lowering volume.

@TheRealFieryBiscuits 2 года назад

hey JC the audio version of this had some 'interesting' unedited moments, you might want to check that.

@SonicScoop 2 года назад

Uh-oh haha, I must have accidentally uploaded the not-finished-being-edited version! Thanks for letting me know. Out of the thousands who have heard it so far you're the first one to tell me. My goodness! That's embarrassing :-) Thanks! -Justin

@GILLISH Год назад

do u have a video on Masters for Dynamics and not loudness like they did back in the day when they did not smash the life out of a record?

@substance90 2 месяца назад

Can you comment on recent drum and bass tracks specifically the neurofunk style currently being as loud as -3 LUFS with True Peaks of +2dB, yet not sounding too distorted? How do the mastering engineers achieve this?

@VinylLS. 11 месяцев назад

If I'm mastering an album that's going to be pressed on vinyl and it's electronic music, how should the volume be adjusted?

@ryde2012 2 года назад

Fantastic 👍🏾 would love to see a practical version

@SonicScoop 2 года назад

I got you! Right here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-y4NlW5S8AsE.html

@ryde2012 2 года назад

@@SonicScoop thanks ill check it out 👍🏾💯

@kingillmusic 2 года назад

i did not understand this part - when streaming services turn down ur master level, why do the quieter parts still sound louder than a generally quiet song? is it because the louder song's quiet parts are normally louder, or is it because streaming services only turn down the loudest parts?

@soundbeasttv 2 года назад

This is the mistake I made initially. Mastering to a particular LUFS level. Reason some tracks sound louder is cos they have generally shoot for much louder on the LUFS reading. Sometimes -7 to -8 LUFS. Its not necessarily 'Louder' just more dense.

@kingillmusic 2 года назад

@@soundbeasttv so its the perceived loudness which comes from the added compression?

@soundbeasttv 2 года назад

@@kingillmusic yeh. That and saturation. Anything to bring that RMS level up.

@kingillmusic 2 года назад

@@soundbeasttv ok, appreciate the response!

@danysantiny Год назад

Hi :D Integrated Lufs or Short term lufs from loudest part?

@SonicScoop Год назад

Hi Daniel, All streaming services go by integrated LUFS, so I’m speaking in those terms too. -Justin

@MadACeTeeMack 2 года назад

The Master should be the same loudness as all other commercially released tracks according to FCC rules/calm act?

@SonicScoop 2 года назад

Not for music releases, no. The FCC has no jurisdiction there. The case is different in broadcast, where everything is played back at the same average level. Streaming services too, normalize levels on playback by turning down the loudest tracks. But the real world experience is that even after this occurs, louder masters can and often will still be perceived as louder. Hope that helps! -Justin

@Hugoknots 2 года назад

Don’t hold out on us, we want the technical and nerdy!

@jheronimusduko7998 2 года назад

Go even nerdier, please!

@davidallanmusic 6 месяцев назад

Dan Worrall needs to watch this.

@SonicScoop 6 месяцев назад

Should I invite him on as a podcast guest? -Justin

@davidallanmusic 6 месяцев назад

It'd probably get you a good amount of views, but he seems to be pretty smugly opinionated about a lot of things so it might just be an exercise in frustration. If you do have him on, ask him to show his mixing and mastering credits. I can't seem to find any. @@SonicScoop

@bencarson3724 Год назад

Many pop records go over 0 true peak when I download versions of them. How do they get away with this?

@SonicScoop Год назад

Because it doesn't matter much most of the time? :-) As long as it's not excessive you'll rarely hear it as an issue. -Justin

@bovinebloodline 2 года назад

-2 LUFS only right?

@roomofidiots 2 года назад

-8 to -6 on my final masters for rock anything really. 99% of the songs I ref are fucking loud. Overall Eq plays a huge part. Sometimes when I think it needs to be louder, it realy needs more top end.

@musicislife4916 Год назад

this is the problem of outdated sound engineers, they still carry the old-fashioned Audio CD attitude. They think they are the ones who created the streaming service, If the streaming service engineer has already made -14lufs is the limit, why does the sound engineer need to break it? do you need to download the audio before you listen to it? that's why I said, if there is still an attitude of loudness war, it is better to put the song in the CD store. If you want to really compete in streaming services, try mixing and mastering that sounds loud and clear without changing the -14 lufs, if you succeed, you are a very great sound engineer in this era.

@MikeBrayton 5 месяцев назад

Well, this still isn't that clear. Suppose you have a song that sounds good at -14 and also at -8 and everything in between, what are you going to choose? You get more dynamics with -14, so then that? It seems like the pros aren't doing that, and are just going for louder. Why? Is it just like you said, that the quieter sections of that louder master will sound louder on streaming services? Or does it have nothing to do with streaming services at all? It seems the rule is "as loud as you can get without losing fidelity." Why? For vinyl, or CDs, or radio?

@Hassan_Omer 2 года назад

I would love to see a podcast where you compare different examples of songs that follow the streaming platform guidelines and those that don't. To see what kind of differences we get between the two.

@J77199 2 года назад

Go listen to Jackie Chan by Post Malone and Light Switch by Charlie Puth. Listen on RU-vid Jackie Chan is turned down around 7.5 db by RU-vid normalization algorithm. Light switch is turned down around 1db. You tell me which one sounds better and louder 🤷‍♂️

@akbararfian398 Год назад

@@J77199 damn how to know if the song got turned down?

@prodbykaifas Год назад

@@akbararfian398 right click on youtube video and press on stats for nerds

@hrflikk 2 года назад

I just keep my (low parts) at minimum -14. after that, i dont care what level its on, aslong the LOWs sounds Fat!!

@orrinogen 8 месяцев назад

What about soft acoustic music? For example just two guitars and voice..

@SonicScoop 8 месяцев назад

Usually you’d lean on the quieter side, -13 to -12, but there are cases of modern, loud production aesthetics, even in these styles. Depends on how processed vs natural you want things to sound. The Johnny Cash American recordings for instance are QUITE loud, even when it’s just a solo guitar and voice. If you want that kind of tone and aesthetic, more limiting is part of it. Ultimately, you should study records you really love the sound of. Hope that helps! -Justin

@orrinogen 8 месяцев назад

@@SonicScoop that helps a lot, thank you so much for answering!

@e1szn 2 года назад

Between -7 lufs and -9 lufs and true peak is -0.1

@SonicScoop 2 года назад

For some genres and styles that's perfect! For some it's too loud and for some it's too quiet :-) But if that range works well for what you're doing, keep at it! -Justin

@BennyParcher 2 года назад

I push my music louder and it sounds like shit. I have to have it down to 18 lufs for it to sound good idk how to fix it

@SonicScoop 2 года назад

If your music sounds really bad at -18 LUFS then something is wrong. That's super quiet. I'd recommend checking your low end. You may be piling in a ton of low frequency sub energy that you can't hear in your room, but that's eating up all your headroom. Hope that helps! -Justin

@BennyParcher 2 года назад

@@SonicScoop thank you bro

@BennyParcher 2 года назад

@@SonicScoop also it's my vocals that sound bad. My beat sound great when I push it. I'm using the neuman tlm102 to record and my voice is a little higher pitched for a male. But im going to try what you recommend first then maybe I'll try digging around to see what else it can be