LOW END MIX TRICKS

Подписаться 139 тыс.

Просмотров 37 тыс.

50% 1

IN DEPTH MIX TUTORIALS, Music Business advice, Live Q&A, Awesome Merch
Join my Patreon here! / coltcapperrune
Instagram / coltcapperrune
My Photography / coltcapperrunephotos
Vero vero.co/coltcapperrune
Website coltcapperrune.com
My Tech RU-vid Channel / @coltcapperrunetech
Purchase All Music Gear HERE: imp.i114863.net/BXPvkJ
Gear In This Video
Fabfilter EQ imp.i114863.net/LJP2V
Brainwork EQ www.plugin-alliance.com/en/pr...
My Studio Build • EPIC Home Studio Build...
Music I’ve Worked On / from-the-studio-of-col...
Favorite Plugins
EQ Plugin imp.i114863.net/LJP2V
Mastering Limiter imp.i114863.net/D5V35
Compressor Plugin imp.i114863.net/zWMom
Best Vocal Mic Under $100 imp.i114863.net/nazLR
Best Budget Interface imp.i114863.net/Z2dKK
Best Budget Studio Monitors imp.i114863.net/EkaeW
My Gear:
Studio Desk dangerfox.com/products/genesi...
$100 off Dangerfox Desks Discount Code: coltcapp
Ultra Wide Monitor amzn.to/3DaYR2G
Monitor Arm amzn.to/3cV7mo8
Microphones
Lauten Audio Atlantis imp.i114863.net/QOqDqz
Neumann TLM 67 imp.i114863.net/5bLzqN
Neumann KM184 imp.i114863.net/x9bom1
Manley Reference Cardioid imp.i114863.net/QO0G5a
Shure SM7B imp.i114863.net/g9bgX
Royer R-121 imp.i114863.net/LJEOO
Beyerdynamic m201 imp.i114863.net/9Nqne
Warm Audio WA_CX12 imp.i114863.net/JrNQ1r
Pearlman TM-47 pearlmanmicrophones.com/produ...
Lewitt LCT 1040 imp.i114863.net/VyWRAR
Rack Gear
Audioscape V-Comp www.audio-scape.com/products/...
Audioscape Spring Verb www.audio-scape.com/products/...
AudioScape 260 VU www.audio-scape.com/products/...
UA 1176 imp.i114863.net/DVBq25
SPL BiG imp.i114863.net/7m66XO
Pope BAX 2020 EQ www.popeaudio.co.uk/copy-of-n...
Interface imp.i114863.net/QBO46
Drum Bus / Vocal Comp imp.i114863.net/RzynX
Radial EXTC imp.i114863.net/vnvj4v
Mix Buss Comp imp.i114863.net/2Or50
CAPI Mic Pre www.capi-gear.com/
Coil Audio Mic Pre coilaudio.com
Power Conditioner imp.i114863.net/qndKG5
Interface imp.i114863.net/QBO46
Monitor Controller imp.i114863.net/Po04R
Patch Bay imp.i114863.net/oAe0W
Monitors / Headphones
Favorite Monitors imp.i114863.net/15WKQg
Second Monitors imp.i114863.net/YOgNe
Make any Speaker SOUND BETTER imp.i114863.net/mgbnNy
Favorite Speaker Stands imp.i114863.net/LPv4yV
Budget Speaker Stands imp.i114863.net/rnvOqj
Best Mixing Headphones imp.i114863.net/MXmdAo
Tracking Headphones 1 imp.i114863.net/0bJjO
Tracking Headphones 2 imp.i114863.net/X6qYy
Bose Bluetooth imp.i114863.net/DV1aqd
Plug-ins
Fabfilter imp.i114863.net/e42J5g
Noire Piano imp.i114863.net/b3MJR9
Komplete 14 imp.i114863.net/WDMrBP
KIT (Neve) Channel imp.i114863.net/ORZK9W
Melodyne imp.i114863.net/e4JLvr
Waves Tune imp.i114863.net/6vjYN
Slate Trigger imp.i114863.net/4eL13G
Waves Element Synth imp.i114863.net/jWD9Xe
Instruments / Amps
Favorite Synth imp.i114863.net/5b6qKo
Acoustic Guitar imp.i114863.net/P0qKgX
Resonator Guitar imp.i114863.net/x9gOG3
Maschine imp.i114863.net/EkaJD
Keyboard imp.i114863.net/bL32M
GTR Amp imp.i114863.net/WbEKJ
Iconic Guitars iconicguitars.com/
Lauren Audio www.lauren.audio/
Camera Gear
Main Camera bhpho.to/3P0Iyt1
Main Lens bhpho.to/3ZqcHHi
Vlogging Lens bhpho.to/3ykQG1F
B Roll Lens 1 bhpho.to/3l61Qj3
B Roll Lens 2 bhpho.to/3sj70Mh
Telephoto Lens bhpho.to/3CCYLQD
Camera 2 bhpho.to/3M57U6U
Lens 1 bhpho.to/3KSLAvS
Lens 2 bhpho.to/3KWc53I
Favorite Shotgun Mic imp.i114863.net/AoQk1R
Favorite On Camera Mic imp.i114863.net/EaD6YP
Budget Camera Mic bhpho.to/3wu6qgj
Favorite Field Recorder / XLR passthrough imp.i114863.net/5bereD
Favorite Tripod bhpho.to/3vRkvnN
Budget Tripod bhpho.to/3WZBlwF
Favorit Gimbal bhpho.to/3GU0pzB
Main Light bhpho.to/3MVHncl
Softbox bhpho.to/3OWKRgJ
Budget Light bhpho.to/3IVUnQL
Small Softbox bhpho.to/3XmySMJ
Color Grading Monitor bhpho.to/388EwOs
Favorite Studio Tools / Accessories
Field Recorder imp.i114863.net/5bereD
Mic Stand imp.i114863.net/XxZEoX
Pop Filter imp.i114863.net/e4aLPj
Patch Bay Cables imp.i114863.net/zWarG
Clip On Tuner imp.i114863.net/QBOna
Hard Drives imp.i114863.net/do3Nmj
Ultra Wide Monitor amzn.to/3DaYR2G

Видеоклипы

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 137

@ColtCapperrune Год назад

What do you struggle with the most in your mixes??

@tonyzinich9294 Год назад

Getting vocals to sit right without being too loud. I find myself going back and bumping them up and down the most

@abrotherinchrist Год назад

Actually recording myself. It's really hard to write, record, produce, mix and master everything yourself. Also, I sometimes struggle with making decisions in the low mid frequencies (200-500Hz) where it seems just about everything crosses over each other. Also, I find myself getting lost in options in the process and get frustrated from indecision. Doing everything yourself is actually a creativity killer sometimes. It really would help to have a partner to collaborate with. A different set of ears you can trust is invaluable. On a different note, do you ever use frequency following EQs in your mixes to accentuate fundamentals or harmonics, like Melda AutoDynamicEQ or Nectar? Or something like MBassador?

@abrotherinchrist Год назад

@@tonyzinich9294 I actually found that I can duck certain frequencies out of instruments really transparently with Smart:Comp2. It's one of my favorite plugins because I can get the music to be as "loud" as the vocals without sacrificing vocal clarity.

@ToHerbiarz Год назад

Competing with mixes of the best Hip-Hop producer. Songs of Dr.Dre, 50 Cent, Eminem etc. Always is painful process 🤣🤣🤣

@pywidem5823 Год назад

Getting a vocal to sound in the mix and not some kind of in top of it. Not volumewise, but more the unnatural feeling that the vocal is singing „on top“ of the mix.

@SnWlf Год назад

The biggest problem that most people have with mixing low end is that they can’t even hear it in their home/apartment studios. Mixing bass frequencies relies so dang much on the tuning of your room and without proper monitoring you’re pretty much screwed

@PaulEubanks Год назад

This is where headphones come in. Remove the room from the equation entirely!

@Sheriffvlogs Год назад

@Paul Eubanks headphones are not Subwoofers.

@PaulEubanks Год назад

@@Sheriffvlogs Correct, good headphones give you much more accurate sub frequency representation than a subwoofer would, and without room rumble clouding your hearing.

@SnWlf Год назад

@@PaulEubanks The limitation in properly hearing bass and sub frequencies is not isolation but size/distance. An 80Hz sound wave is 14ft long and 40Hz is 28ft. Good luck hearing that accurately in headphones or in a 10x10ft room in a house/apt.

@PaulEubanks Год назад

@@SnWlf Well it's a good thing our ear canals are at least 28 ft. long then! 🤣

@VirginHolyFire Год назад

Another thing to mention is to high pass at the beginning and end of your chain because after dynamic processing and added noise, you will often bring up everything you cut out going into your chain depending on how much processing you did💯

@samson4272 Год назад

This is 🔑✨

@PaulEubanks Год назад

Another thing that makes a huge difference is metering your low end on the master bus. Use a spectral graph plugin (after your limiter!) and reference your low end against other similar tracks low end. Sometimes all you need to do do is boost a kick or bass or sub synth up by a few db with the fader.

@audioglenngineer Год назад

I’ve been experimenting with low shelfs replacing my high pass filters, because of the reduced phase shift and ring. It’s a pretty great way to clean up the bottom, while adjusting the corner Q to emphasize or deemphasize the low end of the track from the corner resonance of the shelf, similar to a HPF. I find, especially cumulatively, across several tracks, shelving VS high passing can make a large difference, particularly in the high mids. It sounds less digital and tampered with to my ears. It’s a bit more dialing and time, but so far worth it for me. I’ll often crank down the shelf as low as it goes, both in gain and frequency, then raise the frequency up to where I would normally put a HPF. Then I’ll go higher with the Q if I want more slope and corner resonance, or lower for less. Got the idea from the “Are You Listening” videos from IZotope. Mixed a bluegrass tune today with way better results IMO.

@machineagevoodoo2106 Год назад

you don't need to experiment anymore good sir because you are right = shelves are the better way to go, HP is over emphasized in our culture, and especially producers and mixers new to the game, shouldn't be taught to do it everywhere. They most likely (I know for a fact that they are) will over do it and end up with thin mixes where the body of the mix exists ONLY in a single bassline or sub synth because everything else is frail as shit

@ts4gv Год назад

if you're tightening a shelf into resonance that's gonna be much less transparent than a HPF imo a gentle shelf, sure whatever but the HPF phase shift on its own isn't gonna be audible

@audioglenngineer Год назад

@@ts4gv I’m uncertain what it is I’m hearing with certain digital EQs, usually stock DAW EQs, that has kind of a digital ring in the upper midrange when high passing. That said, I use HPFs all the time - this (comment above) was an experiment I was doing to see if I liked it better. Ended up not being a very practical one, due to the various equipment/time limitations I encounter in my audio work. HPFs rock.

@ybz.1417 Год назад

I have never heard anyone explain things as clear as you do. thanks, man!

@monotroneofficial Год назад

thanks colt! I used the mono-maker a lot on the mixbus, but I changed my approach recently, due to some feedback from a renowned mastering-engineer (zino mikorey). he says: dont use a mono-maker on the mixbus. a mono-maker is a highpass-filter on the side-signal of your mix. so a filter is gradually changing, turning the phase, while the signal goes down the slope. if you put a mono-maker at 150hz, this means, from 300hz to 150hz, the filter will turn the phase to be out of-phase at 150hz, and the lower down you go, it will turn further and further. what does that mean for the "spacialness" of your mix? the ms-encoding/decoding is an adaptiv and substractiv process (L = M + S; R = M - S; M = L + R; S = L - R). this means, if the side-signal is now out of phase at 150hz, the side-signal is now on the wrong side. and this keeps going on down the slope. so you will lose depth in your mix. if you have any side-problems in the lows, you should fix them in the mix. so for example if you have a wide low-synth-bass and you wanna make it more mono in the lows, do it on its channel. same goes for all the other instruments.

@tomasyte Год назад

Thanks for the info! Very informative

@xianduvallx Год назад

Excellent, especially the first and last ones. Nothing improved my mixes more than simply learning how to set faders and filters properly, and managing the low end in my reverbs.

@davebops2478 Год назад

Thanks Colt, I particularly liked the advice about making the low end frequencies mono.

@BunkerAudioPanama Год назад

Real great advice for mixing!!! My magic spot is 188hz. Low frequencies are so big that in a concert or live scenario, they will sound mono even if slightly planned because of either crossovers and the wave length themselves. That low end advice is solid. Those who pay attention will grow for sure in their asking palette if not already implementing these tips and tricks 💪🏼💪🏼💪🏼 Thanks for sharing!

@jakestoneshow Год назад

Thank you SO much for this !!! I love the clarity in how you explain things You are also an encouragement to the smaller guys learning ways of audio

@marklarm Год назад

Excellent clear concise info Colt tyvm this cleared up some problems i've had in my 'thick' mixes. Cheers!

@miltonex Год назад

Wow!!! this is pure Gold for Low End!!!! thanks for sharing!!!

@kumufan Год назад

Great tips! Can't wait to try them out! Thanks for sharing.

@ThisMichaelBrown Год назад

Man, brilliant tips and I also find myself high passing higher and higher with time...I high passed my bass guitar at 60HZ in a recent tune!...cleaned things up...Thanks Colt, always pick up gems here

@carl_47 Год назад

Thanks! Great form to explain in detail in a easy way.

@johntrentmusic Год назад

This is one of my favorite of your videos so far, thanks!

@klight143 Год назад

Excellent low end advice Colt! Thanks

@iancunningham7344 Год назад

One thing I like doing that I'm surprised you didn't mention is side-chaining bass parts. Side chain a bass synth to a bass drum and it'll pump and give both space

@curtisvincent4104 Год назад

Sevendust! My favorite band! Thanks for the content Colt.

@stevebeaudoin7234 Год назад

Colt. What a killer video great info. More videos like this please

@guitarthug4081 Год назад

Best Video yet! Thank you!

@jakeloban Год назад

This video is GOLD. Thanks Colt!

@ColtCapperrune Год назад

Hope it helps, thanks for watching!

@palmal3542 Год назад

Great video...spot on tips and tricks!

@vmf007 Год назад

This info is gold. Thanks for sharing!

@TheGRider56 Год назад

Great video and info. Thank you!

@TheDaveDodsonProject Год назад

Awesome video thanks Colt! The mono bass at 150hz is something I need to try out.

@ColtCapperrune Год назад

One of my favorite techniques! Thanks for watching!

@AlexCornier Год назад

Colt thank you for sharing all your insight and experience, but I would love to see some practical examples of everything you mention, I think it would really make a difference.

@HzofArt Год назад

Really enjoy ya content homie keep pumping the eduction 👊🏾

@yanudol Год назад

FANTASTIC video ... Everything you say is just what I've got to understand too as the result of 30 years of experience, it's great to see how we all get to the same conclusions LOL.... Also, with the experience, I think that we all learn about the most important thing:: SOUND PHYSIQUEand common sense.

@coryhofing-drummer7441 Год назад

all fantastic tips!

@JTFuller Год назад

Great information dude.. Thanks for this one..

@calihearts Год назад

perfect timing 😭

@ColtCapperrune Год назад

Hope it helps!!

@cycleofficial4744 Год назад

Great video ! in my humble opinion the lowcut is more about the headroom of the whole mix since 90 percent of the energy is from 1 to 125 Hz, so that mids and highs can pop more, it's not so much about the reproduction abilities of different speaker systems. Also with 144 dB of dynamic range at 24 bit a low-cut of 12 dB per octave is more of a gentle decrease of volume, so it rather tweaks than cut the lows (a true cut would obviously be a 144 dB per octave filter).

@mixedbyrogers Год назад

Boost the fundamentals. That’s the trick

@Brutuscomedy Год назад

What's helped me recently is using a new monitor--Yes. I only bought one and mix in mono for the most part.--and utilizing its 80hz high pass option. It's a Presonus Eris E8 XT. I check mixes on a cheap computer speaker setup with a crappy sub but more importantly on Blue Sadie headphones as well. A portable JBL speaker is another tool for checking mixes elsewhere, including outside while walking the city. In terms of plugins, I still like IK Multimedia's Linear Phase EQ for transparently high passing the mix (granted, not turning the linear phase option ON so it's really just a reg EQ) and sometimes adjusting in M/S mode rather than universally, keeping more lows down the middle and shaving from the sides.

@KDgenremusic Год назад

game changing advice !!!!!!!!! thanks for this video!!!!

@petecarrollmusic Год назад

Cheers Colt.

@maxuno8524 Год назад

Great advice 🔥

@postman9699 Год назад

Cool video and it's been shared!👍

@ajcohen2621 Год назад

Your legit the GOAT

@vinny-rebel 11 месяцев назад

Great video ❤

@rock9Tray Год назад

been learning mixing for the past month and I actually understood everything you just said.. Fuck Yes. I've been struggling the most with sonics and frequency matchings

@ryganushly Год назад

Love this

@DanBires Год назад

This is exactly why I work with a mastering engineer. Nails it every time lol.

@Violentic81 Год назад

wait nerdy ingineer stuff is the most interesting stuff^^ For electronic music, this mono thing is also important because lot of club systems are still mono.

@AVDRE Год назад

Great tips!

@ColtCapperrune Год назад

Thanks for watching!

@mixedbyrogers Год назад

It’s like back planning. If you learn mastering you can learn mixing

@davidhellegouarch1622 Год назад

Thank you a lot for sharing this in RU-vid ! Can you make the same topic with low mids ?

@WassupFred Год назад

Bro this video.. top 10

@Yurkinz Год назад

Thank you, very interesting! :)

@yanudol Год назад

For the people who have a lack of bass in there home studio, try to get to know the place where you can hear more bass and lower bass.... it might be very near the wall in front of your speakers, sometimes slightly in the corner...most of the time, with the back of your head resting on the wall ... Then get used to go there sometimes to make sure you have what you want.

@joen4376 Год назад

Legit was having this trouble two days ago... freaky timing.

@mobiusvoid347 Год назад

Trying to decide on a set of mix cubes. Currently between Auratone and Avantone. Maybe make a video?

@SuperLevelone Год назад

I like that hoodie... lol Where can I get one like that. Also love ur videos Thank you!

@benettiproducer Год назад

keep it up!

@pascalmerschaudio Год назад

Great Video Colt, when is it Importent to use Linear Phase on Eq´s ?

@gsasoccer7 Год назад

Nicccce video!!! Can’t wait to use these tips. But quick question does the brainworks EQ live on your MiX Bus or is it per Mono track??? Once again love the videos they’ve helped me out soooo much!

@NUANCEZONRISE Год назад

If ur going to use the monomaker from 150hz below the way he's using it, put on ur mixbus. Otherwise it can still be used on ur other mono channels as well especially for widening in stereo and still set monomaker how needed. Bx is a beast..and actually plugin alliance has a sale for next 24hrs...4plugins for 49.99 as long as they're made by Brainworx. ✌🏽💃🏽

@Spannchez Год назад

The mono below 150hz deal is an awesome suggestion! Any good “mono maker” plugs out there that may be a bit more affordable than the V3 while achieving the similar results? PS - Be my Valentine Colt ❤

@andrewlepard Год назад

Looking forward to trying out these tricks! Quick question- do you use subharmonic plugins like RBass and LoAir to make your bass guitar have more thickness? I like using those when mixing live on big PA, but I've been doing more broadcast mixing recently and my low end is feeling pretty bloated. Just feels like I might lose some magic without those plugins though. Any thoughts?

@jacobkleinberg8055 Год назад

Rbass And LoAir are Saturation Plugins, introducing harmonics above the fundamental, thought I would note that just incase because I know there is a large portion of people that believe what Rbass is doing, is increasing the Sub itself in a magical way. I think after something like Rbass etc. some good sculpting in the low mids and the right Two-pole HP could remedy that bloating especially for broadcasting? Sometimes Tape Saturation can be a great way to get the lowend to cut as well.

@awesomematthews1238 Год назад

Use a frequency analyser and reference your favorite tracks while keeping an eye on your 30 and 62 hrtz. Less is more.

@gisellechacon7081 Год назад

Good stuff here. Sometimes the conceptual stuff goes farther in terms of take away value. Thanks, Colt!

@ColtCapperrune Год назад

Hope it helps! Thanks for watching!

@Brizzo.Oficial Год назад

🔥🔥🔥

@AutoclaveBeats Год назад

Thank you for all these helpful tips... please I have a few questions 1. Is the chop shop eq a good plugin to use on kick and and bass to do high pass on low end instruments? 2. I notice that when I high pass on a kick, the volume increases by a few dbs...is that normal or am I using the wrong type of eq? 3. If your speakers don't go down that low, are headphones good for making theses decisions? Thank you

@mixwithjerry Год назад

I think the peak level increases due to the high pass filter causing a phase shift. Also, there is usually a resonance bump at the frequency directly above your hp filter starting point and this will be brought out more with the steepness of the filter curve.

@ColtCapperrune Год назад

I’ve not ever used chop shop before, so I can’t speak to its quality. As Jerry mentioned above, it is likely due to a resonance in your filter. I would try several different EQ plug-ins and see if you can find one where this doesn’t happen, or lessen the slope of your high pass. I use a 12 DB per octave, or 18 DB per octave for most things. The steeper the slope, for instance, a 48DB per octave, will likely have more phase, and resonance, then a shallow slope like 12 db per octave. Most certainly headphones are a great way to check low end

@petefaders Год назад

Right, those low frequencies that you can't even hear are still giving energy and even moving the speaker cone, really for no reason. It just interferes with what u can hear.

@gregtapevideo1464 Год назад

When mixing drums I try to emulate the stereo image of the way the drums are set up. Is that a mistake? Should I mix them in mono? Or partially in mono?

@timothygurung1398 Год назад

I have two speaker at my Church hall I have been following your tips and advice and I have been doing really good and everyone is saying that you are doing good. But the only thing i stuck is the sound track. I don’t know how to get the perfect sound track from the speaker 🔊.

@pedrodyck95 Год назад

To all yes except for making sub mono, my kick and bass are mono anyway, and I actually want my toms, snare and Guitars to have stereo information en the Low frequencies, I actually think that having a good amount of stereo information in 90 to 200hz is what gives a wide mix.

@garagestudioguy 3 месяца назад

Is the Braiworx V3 “mono maker” on the mix bus? I assume so..🤔

@machineagevoodoo2106 Год назад

the problem with this advice regarding HP is that experienced professionals understand what you mean, and do it already, but people new to this type of work will most likely have sub-par monitoring systems, and listening experience, to judge how to properly HP things and most surely overdo it. Which of course you can hear already in music that is out there. If you have a boomy bedroom, all those cuts aren't going to become apparent before you sweep across 100hz or more, and in reality your mix will become frail and thin. On top of this, most of their source audio is samples, that already have been (lets face it) rehashed and recompressed after being lifted from OTHER sample packs in most cases, and so already hipassed several times. Jeez.

@ryanmcconnaughay5078 Год назад

is there any other way of achieving the mono-bass trick without that brainwork plugin? i have the fabfilter ProQ3 if that helps.

@andrewdevlin2255 Год назад

I am going to try mid side on the pro q3, take the below 150 out of the side, where the low Tom is panned, and leave all below 150 in the middle.

@tylerbreckling6974 Год назад

low end is the struggle! seems to be either too loud or too quiet. i started recording my bass guitar to have a more (midrange) tone rather than womby (Bass tone) helping a bit, however it seems theres still that one missing piece to the puzzle..

@unclemick-synths Год назад

Check out Colt's video on limited bandwidth monitoring. If you set the level of the bass guitar in limited bandwidth and then switch to full-range and use a low shelf to adjust the low end of the bass to bring it back into line, you'll find it a lot easier to get the bass to sit right. The mids are the cake (i.e. the mix), the lows and highs are the icing.

@JeroMusicLT Год назад

I dont like hi-cuting everything as it’s shifting phase too much and use more shelving.

@RAZALAHORI Год назад

hey colt is making everything mono under 150hz same thing as high passing 150hz on sides in mid-side situation?

@ColtCapperrune Год назад

Great question! No, if you high pass the sides, you would lose all of that low end information from that floor Tom panned all the way left or right that we discussed in the video. You want to make sure you have something that just makes everything below a certain frequency mono, rather than just high passing the sides, hope that helps!

@RAZALAHORI Год назад

@@ColtCapperrune thank you for answering

@technoworlddd Год назад

The name of the intro song

@ralfmoss Год назад

Intro wow

@80s_kid Год назад

Everything mono below 150 Hz seems interesting, although I find 150 a bit much, maybe 80-100 Hz.

@MicahBuzanMUSIC Год назад

It seems like the safest bet is to cut low end rather than boosting it. Most people don't have systems that can play anything below 30 HZ anyway right? But if there's too much low end it muddies up the mix.

@chocomalk Год назад

My general rule for EQ'ing bass is "does that frequency sound good as a note on a piano"? If the answer is no, its gone. And if that frequency is not on a piano, its gone.

@sleonse Год назад

You should have a Spotify playlist of all the project you've mixed.

@camronferguson7564 Год назад

I am FRUSTRATED.!!! Have one set a kind of cheap monitors PreSonus package Studio One 5 artist.. and a decent set of headphones.. I play all instruments.. Having trouble with mixing a finger picking guitar with a keyboard with piano sound.. now 50% of the time they blend awesome..other 50% they are fighting for domination.. I tried doing it from a visual point..but ear is better..both are secondary and intros and throughout to my vocal... Other than that some of the mid areas of the bass guitar I'm also not hearing... did a trial mix on a rewritable disk.. and bass keys of the keyboard and bass are jumbling together as well.. I have a great ear for this and use to play in a band.. that's the sound I want.. totally new to compression... Compressed vocals with no issues.. compressing the bass helped a little.. I've been watching all your videos.. could really use some advice Colt .... pretty tight in EQ separate..so now what.. Thank you for your page and time😁

@conjarson 11 месяцев назад

Gang maybe i need more hi passing hmmmm good thoughts

@MrJinusean90 Год назад

After 20 Years of professional mixing i can say when your low end in the mix doesn't sound good, you can high pass what you want, it will not sound better. I don't know why so much engineers low cut low cut. The best engineers on this planet rarely using low cut. Only if it's really clashing and the most of the time there is no clashing. The only thing what you do with a ton of low cuts is to kill the energy of the instruments.

@supergman312 Год назад

Anytime I see a thumbnail with q3 in it I can’t help but click that shit

@akumusik3582 Год назад

🎶🎚️🎚️🎚️💯

@HzofArt Год назад

Yo I’m sure you got some spammer scammers claiming to be you in the comments ⬇️

@cryptout Год назад

Be wary on phase shift if you high-pass your bass... oh sorry no Psytrance producers here 🙂

@Aqua_1014 Год назад

Ikr when he said high-pass the mix bus I was like???? Just came from a baphometrix vid explaining why high-passing the bass elements is usually not the best option bc it'll wreck phase.

@Stereomono11 6 месяцев назад

Very dangerous advice, especially for beginners and those with poor acoustics in the room. All they will do is make loud bass frequencies even louder (principles of psychoacoustics) and create a poor mix that sounds bad on any good audio system.