LOWERING MY 2022 BRZ with BC Racing Coilovers! 

New neighbor stops by to say hello.... Neighbor: Hi there. You getting it fixed alright? Cameron: perturbed because he is being interrupted because gearheads hate to be interrupted when wrenching unless it is a naked woman demanding sex... Cameron: Hi homie. Nice to meet you. I am not fixing it per se. I am modifying the car. Neighbor: Huh? Why in the world would you modify an automobile? Sounds complicated. Cameron: Not everybody likes to lead a pedestrian life and follow the path of lemmings that only do what others dictate. I pulled the digital fake sound module also. Neighbor: Sound module. What the? Oh, gulp, I never thought of that. I only do what my wife tells me. I can't even use a pair of pliers and never really had a man card. I cry when I get a paper cut. Cameron: Maybe you could hold the camera for me in the future and bring me a beer when I am finished. Nice to meet you.

take the BRZ to an autocross event, this way you can drive the car to its limits in a safe environment and not too expensive. Also, get an alignment after lowering the car.

noohh, don’t use torque wrench to break bolt lose, get 1/2” impact wrench, you’ll enjoy more working on cars with good power tools.. 👍🏻

Thanks for showing us your install. I've followed jobs people have posted on RU-vid and doing it yourself is usually nothing like what you see on RU-vid. I find RU-vidrs will usually edit out all the hard parts for car maintenance and installs.

Loved the video Cam! It looks great man. I lowered my 06 Mustang about 7-8 months ago, and I’ve loved every bit of it so far. As you’ve seen, with lowering your car you get the reward of the awesome aesthetics as well as the performance boost they give when taking turns quickly! As you mentioned, scraping is always a possibility, however, over time you’ll learn certain spots you need to avoid and honestly, just going slow over inclines and taking them at an angle one wheel at a time goes a long way! Because you’re so low to the ground and because these performance suspensions are meant to be more stiff than stock, you’ll definitely notice an increased road feel, which can be great for joyriding, but sometimes it can be annoying feeling every bump and crack in the road when daily driving. But hey! Coilovers are for fun not comfort haha. Keep up the good work man!

SOOOO Happy for you man. That was really cool. I apprecaite the realistic weekend mechanic's experience you provide. Looks great, and I'm sure you'll find that perfect balance for the dampers as you drive it more. Great vid

I've never lowered a car either. So this is a fantastic video and a learning experience. Well done.

I lowered my 9th gen si with springs and I loved the way it looks. My first lowered car too and at first when I started scraping I almost didn’t like it and I was going to go back. But now, I’ve gotten used to it and I just try to avoid it. Love the way it looks. Can’t wait for the next episode

I lifted my truck 6". Never had done anything like that before either...lemme tell ya, cutting into your frame with a Sawzall will make your butt pucker! Nice job brother!

Loved this video, reminds me of my first time doing some serious work on a car. Things I recommend are a good battery powered impact to make removing bolts and nuts faster, and jackstands to put the car on so you can use the jack to hold suspension up for coilovers install. Also relying only on the floor jack to hold up the car is generally bad practice, as the hydraulics in the jack could fail at any time.

I always say, the best time to meet the neighbor is when you're working on your car.👍🏻😏 Btw, congratulations on doing the suspension yourself, and the car looks great. Waaaay better. That BRZ comes with a lot of wheel gap. Lowering is a must.🚘👈🏼👍🏻

it looks awesome!! Gonna look even better with your new wheels too😎

No joke this is the best step by step coil overs swap for beginners; I appreciate how in depth you went on every bolt, it's good for people like me that don't modify car so often......and I'm sure other beginners will enjoy this to!!!!!

Great job! waiting for my GR86 to come in and I’m a total mechanical noob for the most part so these videos will help when I start mods

Great vid man, I've lowkey been on the fence on bc coilovers for aw11 MR2 but now you've convinced me I should tackle it on myself as well.

These look so good! Loving the content brother!🔥

Good for you for doing this yourself. Saved a bunch of cash and learned a lot along the way. I hope you take on more projects for your BRZ.

Nice! But just a tip bro. Never use a Torq wrench to break bolts. Torque values change when you do that and sometimes doesn't work anymore. Nice video!

DUDE! Thank you so much for posting this video and keeping everything raw. I hate when I'm following a youtube video and something goes completely south from what you're watching. Being in a similar boat as you which is new to working on my car, I always feel like I seriously messed something up. I'm looking at getting a 2023 GR86 in a few months and I can't be more excited! This will be one of the first youtube vids I come back to when modding the car. Keep up the good work and keep posting mod videos!

Yassss nice job Cameron, was rooting for you in the background ⚡️

Looks awesome Cam!! Can't wait for more

Love these videos mate, thanks for sharing.

I'm laughing and crying this whole video I'm a technician so I know the pain and how much harder your doing things but we all got to learn.. and I love the just loosen the bold while your looking at a nut its just great can't wait to put some suspension on my 2022 brz

Get you a set of jack stands cameron. That way instead of struggling to lift you can use the jack. Nice vid

19:32 Both. I was shaking my head wondering why it took you 3 days to do something that would take me 3 hours (granted that's if no bolts strip due to rust lol). But then you said you had never done this before, and I remembered my awful first time. Watching you learn through the process and doing it on your own, successfully mind you, for the very first time was pretty neat. I'll tell you straight up, I had to have my dad help me through everything in the beginning because I was hopeless. Stripped bolts, broken parts, not being able to get the holes to line up. But with lots of time and practice (changing out so many different parts), I learned how to do it all on my own, in a timely manner. It's all a learning process, just like everything else. The more you do it, the better you're gonna get at it. Great video, and sweet car.

You did it!! Looks 👍🏽 great. We had a hell of a time lowering the SI. The 2 fronts were really hard to get in there. But it’s done and the car corners like it’s on rails.

I hope you don't stop making vids man these are great and I really enjoy them!

Looks great low..Those truly are a great looking car..I still miss the cobra tho…

im using this type of coil overs but for the 10th gen civic... makes a real difference. lowered it a bit only compared to stock as daily driving and set the hardness to the middle... been on it for 2 years now and really transforms the car handling. less body roll and car feels more planted.

Just a man with some time, some wrenches and some perseverance. Good for you man! This is why your fan base comes back for more content!

Congrates! Lowered over a dozen cars. If you like BC coilovers, you'll love KW, Bilstein, Ohlins, Koni. BC are just ok in my experience. My favorites have been KW. Now for an alignment!!

Yo the music at 2:00 slaps! I'm enjoying your content man, going through all your BRZ videos. Good stuff. Ordering a 2023 in the exact same spec as you. Your car is beautiful. Hope you are enjoying Florida!

I put BC coils on my civic Si last summer, first time lowering a car too, and the stiffness is definitely worth it for the handling benefits

Awesome vid! For the average Joe like me it helps to see other go through the same struggle installing mods 🤣

Looks so sick !! Great job man !!!

Letttss gooo! Been waiting for this video! Bout to be a banger!

I can appreciate lowered cars, my last two VWs were lowered. It's definitely worth it to get rid of fender gap, and if using the right setup, you improve ride and handling characteristics. Well done Cameron.

Finally 😩 Must be one hack of an install Anyways great job man your videos will be my reference in the future !

Great install vid!!!

Get a second floor jack, push up for you to line up bolt holes, and it'll come in handy again.

Great job man!

Great video bro!

installing these on mine this weekend I'm excited

Well done buddy. Love from Australia

can’t wait to see your impressions on the R being lower i personally liked my R lowered but i’m going bags soon after my coils came loose while going to work

Love the videos Cameron, the Type R brought me here but I'll watch whatever you put out. As I've said before I rarely comment, But I'm always watching from start to end.

damn ur reaction to first time driving a lowered car. ive never driven a car with coilovers either, but you're making me excited and really want to get a set and install them on my is300

great job man! 👌👍💪🏻

Looks great man!! Cars always look better lowered. You should take it and have it corner balanced by a shop that knows what they’re doing and let them dial it in for you and make them adjusted the best way for your driving style. That will get the best out of a nice set of coilovers like the BC Racing ones you’ve got.👌🏽🔥🔥

Awesome job! I lowered my Miata to 5 inches and it takes 90 turns at scary speeds. My only issue was no more automatic car washes! Great tutorial!

Nice job tackling this project! Coilovers are surprisingly easy to install just time consuming as you found out.

Looks great looks like the handling is amazing now. Good time to take a two a shop to get a front end alignment after doing suspension work. Enjoy the ride!

Good job man!

Nice install! I want these Coilovers now too

Congratulations 👏 Cool suspension, corners just on rails)

Do not break bolt loose with a torque wrench, get a breaker bar. Love the vids 🙏🏽

a hear tutorial, great video to learn for beginners , thank u for the detail’s

Nice vid. Next is the brakes. That is one of the biggest weak points of these cars, they come with very weak brakes from the factory considering these are meant to be momentum, handling HPDE type of cars. Don't forget to do the stainless steel lines when you get the new brakes, most kits come with them included but just double-check.

George is the neighbor we need~

I love that lower spring!!!

Always a good day when Cameron posts 🙌🏻

Just came here to say should've went with the DS Series. Digressive is absolutely the way to go. Rides like a dream on the street.

Mine is GR86, I’m glad to see your Subaru BRZ. From Japan.

love all your videos bro

Loved the video man. And I felt it when your girl said she doesn't like it lol. My girl is the exact same way!

I think it’s definitely a good low, once you get wheel on the fitment will be 🔥

sick video. I think you got me sold on that setup. Probably just gonna do an 1in 1/4 lowered and prob set damps to 20

Drop looks perfect 👍🏼

Looks good on it!

not too big on cars that are lowered but the brz looks way better. love the vids cam. also when you knocked on wood and ended up knocking on your tree, something I would do 🤣🤣🤣

Nice job looks great

We all had to learn sometime good job your first time.

Looks good man

Whaaaaaaaat? First time taking off a wheel?? Wow man, congrats on the install.

Thing about lowering a car...looks good..feels good..until you hit the bumps..then you're like.."oof" 😅

Those coilovers are super nice👌

Awesome content. I like the way you explain how to install and whats hard. This is how boostedboiz got popular too.

I just went through this process for the first time as well with RCE Yellow Lowering Springs on my 2020 BRZ - and my first time taking wheel off my car as well!! haha- first time for everything. Lowering Springs was a total B - cos had to compress the springs and remove from the struts etc

Nothing went wrong with the install!!!! Congrats, seems like a first

Time to lower the Type R! Love the videos bro! Keep up the work!!

Love the lines of the car and duck bill

Great video brother lower car is the best 😎 nice Subaru

I'm lowering my car next week and I can't wait to hit those turns myself!

CamHSquad!!

Looks great

Looks great.

Really cool video. Just a good advice, get some good jack stands and use them to hold the weight of the car after you jack the vehicle up. It is super unsafe and dangerous to let the hydraulic jack hold the car while you go under it, you don’t want to get killed by your car, remember safety first. 😎👍👍

had to come back to this video never really appreciated it until I needed it 💀

Looks great! Did you need to get an alignment? Did you get control arm bushings returned since you changed the geometry and those bushings will always bearing that tension. Bushings is part of reason I am not touching mine…

Cameron..... that roundabout told me everything I wanted to know! 🤤🤤

This makes me feel a lot better about me doing it myself.

Get that thing aligned and let it eat! A touch more low, about 1/2 an inch would get it sitting perfectly 💯👌🏼 Enjoyed the video for sure

Good on you for being honest with how long it took you. To give some advice you should go to Harbor freight and get some cheap impacts, shortens the time of everything

great video! Did you ended up lowering more?

You’ve got some nuts to do that 👍

Hey big fan! I would recommend an alignment at Dealer(highly recommend) after lowering ur car. I do work at dealer and we get a lot of modified cars and always ur alignment is off center due to lowering. Just my thought on my experience

For the rear, connect the damper to the LCA first then Jack up the LCA until the top of damper is through the chassis.

I remember hanging my first suspension… took me the whole day and j was so long on how to remove some bolts. It’s very common to have to drop most of the crossmember or subframe so the bolt can come out

Best coilovers for quality, comfort, handling and price point.

Looks good Cameron but add a bit of camber to it then take it out again😮‍💨👌