LS2 Subverter Helmet Review 

How do you like it?

I fell like bell and ls2 are basically the same but bell is overpriced

Same doubt here

The LS2 should provide more room for your nose. Keep in mind that you can also trim that piece a bit if you want. -DrewZilla *www.revzilla.com/ls2-subverter-helmets

No, you cannot remove those back vents. -DrewZilla

In most cases, yes, you would get a small. -DrewZilla

Medium cheek pads are actually thicker, as the outer shell is the same for both helmets, but the cheek pads need to fit a smaller head in size medium (so bigger cheek pads to take up the extra room). Unfortunately, you can only swap large cheek pads with medium, so you cannot get a looser fit. The only option is to step up to the size XL helmet. -DrewZilla

Ls2 just sent me some large liners since my medium felt super tight

That's just a helmet donut or "service pad," as Icon calls it. Check out the link below. -Kraus-e *www.revzilla.com/motorcycle/icon-helmet-service-pad

58cm is normally a size medium, but you would probably want to size up to size Large. You do not need XL. -DrewZilla

@@RevZilla So I must have large cheek bones or something because I ended up buying a LG and it was super tight on the sides of my mouth. I traded it for a XL and now it's better but still pretty snug.

How about painter's tape over the vents, on the outside, when cold? Haven't tried it but blue painter's tape doesn't normally leave a residue.

There isn't really enough flat/clean surface area for the adhesive mount. However, we've seen a ton of people at the track and dual sport rides with some cheap chin mount strap options that work with most GoPros. We don't sell any at the moment but there are plenty out there on the market to grab for a few bucks. I used one during the NE24 hour race last year to hold a chin light without issues. If you have any other questions or concerns, please feel free to reach out to our Gear Geeks at 877.792.9455 or cs@revzilla.com. Ride safe, -Pat

The biggest difference is shell construction. More expensive helmets tend to use a fiberglass composite shell construction, while the Subverter uses a more affordable polycarbonate shell. Additionally, while the Subverter has a pretty nice liner, nicer helmets generally have nicer padding as well. The Subverter is a really good value, so if you find it comfortable, then you don't necessarily need to spend $450. -DrewZilla

Only if you're at the top end of a medium in Shoei, for example closer to 58cm rather than closer to 57cm. -DrewZilla

I have an M size Shoei ex-zero which fits perfect, and the L size LS2 Subverter fits snug. The LS2 will probably break-in to be perfect.

Probably yes, though this has a slightly narrower fit compared to Fox helmets. -DrewZilla

Nah I’m a large in normal and wear xl

No different than any other dirt helmet. You'll get a bit of drag with head checks, but otherwise it's fine. -DrewZilla

You would need to see if there is a distributor of LS2 in NZ. -DrewZilla

EPS is a material that will deteriorate over time with the elements like water and excess sun-exposure, yes. But that is a problem all dirt-style helmets have to contend since dirt-riders are more concerned with ventilation than the occasional rain storm. EPS is much more at risk from excessive sweat and lack of cleaning than it is to rain from time to time for what its worth though. Something to consider, but something all dirt helmets encounter.

@@RevZilla thanks for the reply! I see. I will consider it. While saying sweat, are you referring to sweating due to offroad biking? My requirement is for street riding in India. However, unlike the western world, riding in India is pretty slow. I usually cruise at 30-40kmph. Also, unlike the west, India has pretty bad roads. So I was considering an offroad helmet (especially since rotational forces are given attention). Due to the legal restrictions of helmets in India, finding big brands is difficult. I have shortlisted two options. LS2 Arrow R Evo (2021 import year) and LS2 Subverter. Assuming the only things considered are safety and not venting, which one would you pick (Arrow, Subverter) if you had the same usage as mine mentioned in the above paragraph? Thank You! Yours sincerely, Varad

@@RevZilla Sorry for another question, But if I were to buy the Arrow, then I would be getting it at an discounted price. This is mostly because in India, the Arrow is discontinued. Is there anything I should check. I wont be getting any warrnaty (if I had been LS2 gives only 1 year warranty in India). So I would like to check the helmet thoroughly. What should I check and how? Thank You!

Yes, and you can swap them within the same shell size but not from one shell to another unfortunately. www.revzilla.com/motorcycle/ls2-subverter-helmet-liner www.revzilla.com/motorcycle/ls2-subverter-cheek-pads

That helmet has been discontinued, and will not be restocked. -Zack

RevZilla ok thanks for the reply !

RevZilla why was it discontinued?

The LS2 Subverter is based on the same size chart as regular full-face LS2 helmets, but the internal head shape is not quite as narrow as other helmets like the Arrow and Citation. I would still get the same size, but would recommend wearing it in your house for at least 30-60 minutes before taking it out riding to make sure it does not cause uncomfortable pressure on the middle of your forehead. -DM

I've done 8hr plus adventure rides in mine without any issues. Wicking is very good

... and yet; we are wearing it in this video that you just commented on.