The ACC line is a smart line, which can solve many problems during use. It is generally recommended that you install it. The standby current of the meter is very low, only 1.5MA, which has little impact on the battery. OBD2 interface. Most cars can be used normally without ACC line, and some cars need to be installed with ACC line
Hey, I have a 2002 Ford Mustang GT, when I connect OBD2 it says "Searching Protocols" and shows no data. My car has many data points by OBD because before I purchased, I used Bluetooth OBD scanner and can see many gauges via phone app. Why does your product not work with my car? Programming issue or software update needed?
LUFI XF installed on the 2002 Ford Mustang GT The search agreement appears because the two are not compatible, and the problem cannot be solved by updating the software. For your benefit, please choose to return it on Amazon. The recent feedback from netizens and his 2018 Ford Mustang is very suitable, a small number of cars before 2006, there will be incompatibility between the two, thank you
@@lufi-xf6224 Hi, thanks for your quick reply. After doing additional research - I see the problem is 2002 Ford Mustang GT uses 'SAE J1850 41.6k baud' protocol (pins 2 & 10) for data. Lufi device uses ISO 15765-4 (pins 6 & 14) for data. I tried shorting the corresponding high and low pins (6 to 2 & 14 to 10) on my car but I still couldn't get data. Can you please look into supporting these older cars? Many of us car enthusiasts want this device for monitoring data on old project cars. I think by expanding the compatibility of your device, you can sell to much larger customers. I have an engineering background and can help with developing and testing this with you / your company. Would you be interested? A $15 KONNEWI Bluetooth OBD can read every car from 1996 including mine, why not this $120 item? Thanks.
XF no G value function only XS has, gear display is analog gear, the car has several gears, you need to set the corresponding number of gears in the instrument, when the speed reaches the corresponding gears will display the number of gears
Interesting to learn the details, I have one of these, just noticed as soon as you plugged it in there was a beep. Does this mean they use battery power even if the ignition is switched off? If yes can I set the device to be completely off when the car is not in use..?
LUFI-XF standby current less than or equal to 1.5MA three months without driving do not affect the battery, automatically start with the car, do not need to shut down separately,thank,you
Hi, I am using a Lufi XF but it only has 3 interfaces intstead of 5 as shown in your video. I tried to toggle multiple times but only could see the same 3 interfaces, anything i can do?
There will be no new models in June, because it is difficult to purchase chips recently. If there are new models, I will leave a message to you, thank you
My car does not show my oil temp or oil pressure any way this can be fixed ? Especially with the oil pressure as that what I was hoping for :/ I have a 2013 Genesis coupe 2.0t
Your car may not be equipped with an oil sensor, if so you can attach a sandwich plate to the block but I think to my knowledge it would only work with an analogue gauge unless there are more expensive ones on the market that allow it to connect to Lufi.
Does the odometer mileage reset every time you use it? Or does it keep track of the mileage between sessions? Also, can you manually set the mileage to match the car's odometer?
The odometer, like a car's meter, starts at 0 miles, you can't manually change the mileage figure, and after resetting the system, it starts at 0 miles again and then accumulates the mileage
Does the meter keeps on draws power from the OBD port when we dont connect the IGN cables? I tried mine without the IGN cable the meter tur off the display when ever I shut down the engine. Display OFF = Meter completely OFF?
The standby current of the instrument is only about 1.5MA when the car is not working, and the car battery will not be affected if the car is not used for 6 months
May i know whats the volt adjust for? Before i change my battery, it reads at 13.7 but after i change to a new battery it reads at 11.8 - 12 .. do we need to adjust the volt manually or will it calibrate on its own? Tried adjusting manually but it doesn't read at the right volt of a new battery.. pls help
I’m wondering if I can provide a signal from a vacuum/pressure sensor that I would have to install, could this unit possibly give me a readout for boost and vacuum? It does everything else except EGT, and I’m very happy with it, especially compared to the other one that looks similar for $46, but doesn’t have all the features this one does.
For design reasons, the original packaging does not have an external warning light. Friends who have purchased our meter can give us the order number, and we will send one to you after verification
@@StevenAngGTI yes i bought a lufi xf, just receive yesterday every function work fine. Only boost meter not working any idea? Try update it but still not working
There are turbo A and turbo B in the instrument, just to adapt to different models, you first adjust to turbo A to see if it can be displayed, then you can find turbo B. This will solve most problems, if it still doesn’t work, send me an email , Send me the picture, I see if it can be resolved
Because the number of gears of each car is different, it is necessary to set the corresponding number of gears in the instrument in advance, and then when the speed reaches the corresponding value, the reminder of shifting will be displayed
I have seen the address you emailed to me. The lamp will be sent by the U.S. Postal Service, and it is expected to arrive within 10 working days. The order number is: 92144902485321000198919395. Inquiry website: WWW.USPS.COM
Need to switch to replace a new SD card of less than 8M, and then send an email to the engineer: lufigauge@outlook.com,He will send you the update program
