Lumino 42-120" Single Rod Set Installation 

The wall this video was shot on, has studs, so dry wall anchors were not needed. My favorite type to use for drywall are the screw in drywall anchors. You use a screwdriver or drill to push in the anchor until you meet the threads. Then screw in until it is flush with the wall.

Was this able to help with putting your rod set together? Or do you have additional questions?

I don’t understand how to extend my rod.

@@kirawalmer6988 There should be a smaller rod located inside a larger one. Pending on the extension you want, you can pull that out to your desired extension. If you wish to have a larger extension, then you will need to pull the smaller/inside rod out a little bit and connect it to the third pole. If you have additional questions, feel free to email support@luminodecor.com.

We have a separate video for how to install a double rod. Please note this is the single rod instructions. If you click on our logo it should bring you to our video library.

The middle rod has one end that is made for the decorative end to connect. If you switch the pole around, then the other side should have the end to attach the decorative end.

My rod is the same way It doesn't fit into the other end. It doesn't fit so it can extend 120 feet long