You might actually be able to get away with the stock wire on anything under a 6.5 riser, but don't quote me on that. I will say it sucks to find out you're wrong in the middle of an install, because then you have to put everything on pause until the extension comes in. But in your case, if it was me, I might roll the dice. Hope that helps. Let me know how it turns out.
Yup, I had to extend all the wires (including the throttle by wire wires). I purchases a wire extension kit for the speedo display, but for all the other wires I soldered in extensions.
Amazing video, one of the best I have watched so far! I have ordered the same OG 10.5-inch raiser and handlebar. I am going for 6" wires extention (plug and play). I am planning to keep the oem brake line however I can't find the proper lenght for the clutch cable. Any advise on what length I need and where to purchase it? are 6" wires extention long enough? Thanks in advance!
Appreciate it. 6" wires for plug and play will be perfect. I used the LA Choppers Upper Quick-Connect Clutch Cable (12"-14") and I've got no complaints. I purchased it from Revzilla. www.revzilla.com/motorcycle/la-choppers-upper-quick-connect-clutch-cable-for-harley-softail-2018-2022?sku_id=10175135
I got away with reusing the break cable, but I had to get a clutch cable extension and a digital speedo extension. I also extended all the internal wiring. Thanks for the confirmation on the heated grips cable.
I got away with reusing the break cable, but I had to get a clutch cable extension and a digital speedo extension. I also extended all the internal wiring.
