Download link:
Arkm8c.tar.xz 1.4 - 908 MB
bit.ly/arkm8c14 - Google drive link
bit.ly/arkm8c14M - MEGA link
Use BalenaEtcher to write the tar.xz file to an sd-card.
etcher.balena.io/
For version 1.3 and up there is no need to uncompress it first.
You can find and change gamepad and other settings related to m8c or i3 in the /boot partition in a folder called "m8c-settings"
❗❗❗If you experience latency after starting your device. Put it in standby mode by pressing the power button and wake it up again. Your device will appear unresponsive for a couple of seconds, but after a short wait it should work fine.❗❗❗
Controls:
D-pad = Navigation
B = Edit
A = Options
Y or L2 = Shift
X or R2 = Play
R3 + Up or Down = Brightness Up or Down
FN + Select = Shutdown
If you get nothing but a black screen after booting, copy the rk3326-r35s-linux.dtb file from the original sd-card's /boot partition that came with your device. Then replace/rename it to rk3326-r36s-linux.dtb in the /boot partition of you fresh Arkm8c sd-card.
Headphone problems with the R36S? This adapter might solve it;
bit.ly/43hYwXj - AliExpress link
Changelog:
v1.4 - updated m8c to version 1.7.1
v1.3 - lowered latency even further
- cleaned up the status bar & added battery status (FN button)
- shrunk the image to 4GB (908MB compressed)
- doesn't expand filesystem anymore after first boot.
- pavucontrol doesn't start at boot as default
- added settings folder with symlinks to m8c and i3 configs in /boot partition
v1.2 - we don't talk about version 1.2
v1.1 - lowered buffer size from 1024 to 256
older versions:
bit.ly/arkm8cxz - v1.0
bit.ly/arkm8c1xz - v1.1
bit.ly/arkm8c13 - v1.3
A very special thanks to:
Trash80 - Ditrtywave - dirtywave.com/
and to the creators of:
m8c - github.com/laamaa/m8c
arkos - github.com/christianhaitian/a...
pishrink - github.com/Drewsif/PiShrink
and the entire foss linux community.
27 июн 2024