[Ma.K.] Started building A8/R8 Maschinen Krieger plastic model! Body assembly ~ Poly cap painting 

I'm making Maschinen Krieger's plastic model "A8/R8"!
This time in the first production video, we are assembling the body and painting the poly cap.
As always, I'm slow, but I'm aiming to exhibit at the 12th Ma.K. tamagawa meeting.
It supports subtitles in several languages including Japanese. Please turn on [CC] (subtitles) in the RU-vid function.
[S.A.F.S. Mk.III A8/R8]
S.A.F.S.'s assault type, A8/R8 is finally here!
The "S.A.F.S." lost its superiority against the Strahl army's combat armored suits, requiring an increase in output and the addition of heavy armor. The "S.A.F.S.Mk.III A8/R8" with a bore-up engine and armored front and rear engine parts is finally added to the lineup.
The kit is a snap-fit type that does not use adhesive. Various poses can be enjoyed with the polycap joints. A characteristic detonation cord is also included.
(From WAVE HP)
It's a snap fit (a kit that can be assembled without glue), but there are places where it's easier to glue. Be careful not to let it flow into your joints~
amzn.to/3NHXLAt
[Tamiya cement (pour-in type)]
Ideal for gluing while temporarily assembling and assembling large models. This is a type of adhesive that is poured into the gap by aligning the adhesive surfaces. Reliable adhesion is possible by securely entering even small gaps. It comes in a 40ml square bottle, and the cap is set with an ultra-fine face brush that is convenient for pouring. If you use it in combination with conventional adhesives, the efficiency of assembly work will be further improved.
Styrol resin adhesive. Application: For plastic models Ingredients: Organic solvent (100%), butyl acetate, acetone Net amount: 40ml
(From TAMIYA HP)
It is a smooth and non-viscous adhesive, and I use it a lot. Since it is not viscous, it is troublesome if it leaks onto the surface of parts, so be careful only there.
amzn.to/3ppAWIv
[Zoukei-mura Serakanna (thick blade)]
The step exposed on the part surface is the parting line. Just hang "Zoukei-mura Serakanna" parallel to it!
The ceramic blades are safe and do not cause injury, and once you experience the "crispy feel", you will be addicted to it! Here too, the trick is to "apply the edge of the blade gently at first and see how it goes" so that you don't shave too much.
(From Volks HP)
I think that it will last a lifetime if it is a plastic opponent.
hobby.ec.volks.co.jp/category...
[Argo File Electric Stroke Sander Ultima 5e ARE105]
Pen-type back-and-forth motion, lightweight, AC adapter compatible
A hand-held speed control dial allows for 1,000 to 5,000 reciprocations/minute fore and aft strokes.
By adjusting the vibration frequency according to the work content, it is possible to polish the surface of gaps, recessed areas, and narrow spaces without destroying the delicate molds of 3D printed models output by 3D printers, which has been time consuming. It is now possible to cleanly finish only the lamination marks and bridge marks.
It can be used for a wide range of purposes, from plastic models to figures, and can be completed more quickly than ever before.
High-precision drive parts used in the high-end model Altima 7 are used to achieve high stroke accuracy and quietness.
(From Argo File Japan HP)
It's really easy to file with this.
amzn.to/3NtiW82
[Funtech slashing series carved carbide 0.3mm SB-03]
A precision tool developed for streak carving.
By using a very hard cemented carbide (tungsten carbide)
Achieves amazing sharpness and high durability.
The edge of the blade is sharp and flat, making it possible to carve lines of uniform width.
can. Even if you carve deeply, the thickness of the line does not change.
Since the cutting edge is sharp, it is possible to carve streaks from the corner as shown in Figure (1).
13 blade widths. Wear a color-coded ring for each size.
It is used by attaching it to a sword holder or a pin vise.
(From Fantech HP)
When using it, I use it by inserting it into the shaft of the pin vise.
amzn.to/3Xmusqv
[PLA-MODEL DAYS Blog]
This is the blog version of our channel.
We post small stories, game stories, event reports, movie impressions, etc. that can not be included in the video.
Of course, there are many articles linked to videos of figures and plastic models.
Ma.K. tamagawa meeting: Tamami information is also posted.
Come see it!
plamodeldays.com/
[Jack Abe FACEBOOK]
This is the Facebook account of Jack, the manager of this channel.
I'll post updates on Tama~.
/ jackswansong
[PLA-MODEL DAYS Twitter]
Twitter as well.
We send retweets and the latest production status.
/ modelingjack