Machining Microwave Coaxial Low Pass Filters Part 1

How to Make Metal Lathe Chuck Without Milling Machine. DIY Lathe Chuck.

Куда мы движемся? / Дмитрий Потапенко* и Дмитрий Дёмушкин

ТАМАЕВ vs ВЕНГАЛБИ. ФИНАЛЬНАЯ ГОНКА! BMW M5 против CLS

Его не вернуть #rust #triffon #раст #трифон #стример

СКОЛЬКО ПОЛУЧИТСЯ КАРТОШКИ ФРИ ИЗ 1 МЕШКА КАРТОФЕЛЯ ?

Machining mmWave Radar Rotary Couplers at 122 GHz

Machining and Microwaves

Подписаться 48 тыс.

Просмотров 16 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Machining a tiny waveguide coupler to connect a millimetre-wave 122 GHz Radar chip to equipment and antennas fitted with waveguide flanges, whilst allowing free rotation during cavity size adjustment. Made in a manual machine shop.
Lots of precision machining to create a UG-387/U mmWave waveguide flange and 2mm diameter waveguide guide on my Colchester lathe and Bridgeport milling machine. As usual, there's lots of "help" from my AI assistant Aimee, mostly pointing out my inadequacies as a machinist so the trolls don't need to bother. Marvellous.
The design of the coupler is based on those by Andrew Alexander VK3CV to fit the Silicon Radar TRA120 mmwave chips with antennas integrated on to the device substrate.
Feeds and speeds for the brass machining section: 900 rpm using the variable speed 3 phase inverter, feed 0.17 mm per rev, CZ121 bar. Insert is a YG-1 CCGT120408--AK-H01 from Cutwel www.cutwel.co.uk/ccgt120408-a...
Rewind button image by pixabay.com/users/maklay62-18...
Rocket image from pixabay.com/users/clker-free-...
Arrow from pixabay.com/users/mireyaqh-15...
Corncob track is licenced to RU-vid
Till with bell by freesound.org/people/Benbonca...
Contents:
00:00 Why and How?
03:22 Long drill time
12:14 Lots of parts
12:30 Threads and Dowels
19:34 Assembly

Опубликовано:

22 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 110

@older-wiser-better Год назад

Not a clue what you are talking about but this video of yours is just brilliant.

@MachiningandMicrowaves Год назад

That makes two of us, I have no idea what I'm talking about either, so you are in excellent company!

@mlekotron Год назад

I know nothing about microwaves but I love your videos!

@MachiningandMicrowaves Год назад

I only know just enough to be dangerous! I love making them, so that's a double win.

@vmiguel1988 Год назад

You just need to know the right time to not burn the popcorn!

@user-hq2gs3lg6v Год назад

Impressive job, Neil! Greetings from the mmwave design engineer. We work with similar waveguide structures at 100 GHz and above. Your content is definitely a gem for us.

@ivanlam1304 Год назад

Amazing precision, 122Ghz will not tolerate even small imperfections, very enjoyable just watching how you make these parts

@MachiningandMicrowaves Год назад

Soon I need to make some parts for 248GHz. This is going to be a whole new level of "fun"!

@edgeeffect Год назад

I've had a double helping of nice spiral chips off of brass this week... but Stefan's don't go "weeeeee"!

@MachiningandMicrowaves Год назад

I think you need a "special" microphone to pick that up....

@WhiskeyDale Год назад

Quinn & Kurtis getting a shout out. nice

@MachiningandMicrowaves Год назад

Kurtis, Karen and Homie are a major influence.... so is Vice Grip Garage and all the YT precision machinists like Joe, Stefan, Peter, Max and Rob, plus the folks like Breaking Taps, Applied Science, Huygens Optics and other seriously technical channels. Explosions and Fire and Nile Red also, for "different" reasons. I can't get my Chihuahuas (Dido and Daisy) to perform for the camera yet. I must try to get them involved now I have a proper camera (Sony a7 IV + motion gimbal - I feel like a proper photonerd now). I'm trying to get the hang of manim so I can do animated charts like 3b1b

@peterfitzpatrick7032 Год назад

I just want to say that your detailed replies to others here in the comments section are as valuable as the video itself, given the precious time taken, I really appreciate that effort on your part...yer a good egg... 🤗 From the Emerald Isle 😎👍☘️🍺

@MachiningandMicrowaves Год назад

I often learn a lot when I'm researching replies and get some good new ideas as well, so it's a two-way street.

@nicholasmcconnell7853 Год назад

Like most here, lowly machinist but your videos are a joy. Keep it up!

@MachiningandMicrowaves Год назад

No such thing as a "lowly" machinist, they are all Gods in my world-view. I'm totally in awe of *proper* machinists who know what they are doing. I'm a hacker, amateur scientist, coder and radio comms/network engineer who earns a daily crust being a cybersecurity architect (whatever THAT means) and messes about in a home shop designing and making shiny things that make me happy. The fact that they also WORK is a huge bonus, and when you add in the nice comments from the RU-vid community, it's wonderful and life-enhancing.

@ericstammers Год назад

another masterpiece. Well done Amy .

@MachiningandMicrowaves Год назад

She's a star. A rather tetchy, snarky, critical star.

@ClaytonwFirth Год назад

Excellent, Aimee is back on RU-vid. I was getting worried that she was getting too sassy and Niel deleted her!

@MachiningandMicrowaves Год назад

She's found how to disable the uninstall facility. I am dooooomed....

@smallcnclathes Год назад

Entertaining as always. I love the render and lighting effects you get with Fusion, pretty sure my cad can do that, I just don't know how! Nice to see someone else using the inserts for aluminium on brass, works really well. Some folks stay away from narrow parting tools thinking they are too weak. They then have to endure the horrible vibration that a 3mm insert gives them on a small lathe. I noticed the finish you obtained parting off looked acceptable for finished product. Noticed you wiped a taper with cloth or paper towel. I was taught to do a final wipe with a finger as anything left behind you will feel with your finger but not if using a cloth etc.

@MachiningandMicrowaves Год назад

Good point about the finger, but when I'm filming, I'd have to keep cleaning the offending digit so I don't get oil on the lights and camera, so it's all a bit artificial. Also I chop out about 90% of the footage where I fiddle about and double-check so that I can keep the narrative flow going, so what ends up in the vid is highly selective. Those 1.5 mm parting/grooving tools are HUGE in comparison with those I have from Simtek, which are only 0.5 mm wide. They'll turn up in a future video. The inserts are scarily-expensive, but on tiny aluminium mandrel parts which are going to be (spoiler alert) dissolved in hot caustic after electroforming, they last forever. As for the lighting in Fusion, I just fiddle with the settings until it looks pretty. I have other rendering tools like Blender and POV-ray and visualisation tools like Paraview, but if I can just use Fusion, it saves a pile of time.

@AlessioSangalli Год назад

@@MachiningandMicrowaves I just finished "tuning" an animation for the astronomy club made in POV-ray, I just love its SDL.

@MachiningandMicrowaves Год назад

I used to do a lot on POV-ray and Moray and Blender, but I don't use them enough to be fluent

@KD2HJP Год назад

Holy cow! This is exquisite to watch

@MachiningandMicrowaves Год назад

Ah, a man of Taste and Discernment. Splendid.

@bobluthier3031 Год назад

those brass chips were quite nice

@MachiningandMicrowaves Год назад

Pity they aren't much use, but I'm keeping them for a future metalcasting session

@TheTsunamijuan Год назад

Glad to see some content out of you again, I had been fearing that I had both forgotten your channel name, and forgotten to sub. Thankfully that was not the case. Hope life is treating you well!

@MachiningandMicrowaves Год назад

The long summer break was immensely busy and I have LOTS of footage that will appear at some point, but the projects involving partner companies and TV production outfits will take a long time to reach RU-vid.

@dimievers5573 Год назад

Good stuff mate 👍

@MachiningandMicrowaves Год назад

I'm having fun as usual.

@JainZar1 Год назад

Yay, another video! 😄

@MachiningandMicrowaves Год назад

Lots more on the way, the Day Job is madly busy and I have three amazing collaborations in progress plus about 50 hours of video footage to edit and make into a vaguely coherent narrative. Need more hours per day....

@JainZar1 Год назад

@@MachiningandMicrowaves Don't we all. Damn sleep deprivation!

@astralchemistry8732 Год назад

Neither did I understand the problem nor the solution but I enjoyed the machining and the jokes! :D

@johnlambo135 Год назад

Love it Neil👌👌 As always. Love the finish and chips with your aluminum insert… 73 John 7JB

@MachiningandMicrowaves Год назад

Hi John, they look even better when they are gold plated...

@quinnmclaughlin7537 Год назад

I Suck at math, but I know enough about So many other subjects that your videos are 'brain candy' any more complicated and I'd loose interest, just complicated enough to make me keep watching.

@campbellmorrison8540 Год назад

Impressive, Im surprised you got away with turning that flange on such a thin stem in the collet. Nothing like sharp tooling huh :)

@MachiningandMicrowaves Год назад

I seem to have got away with it on 14 of those parts. I did get a little chatter on one, but when I flipped the insert to the unused edge, it was fine again. Those inserts do wear fairly fast on brass, but in terms of cost per part, it's negligible. I use an ester-based cutting oil for finish cuts on brass to reduce tool pressure a little and help with chip clearance. I do get some adverse comments about that, but on long thin parts where I'm looking at precise dimensions and fine surface finishes, it does seem to make a small improvement. I would like to make a proper custom collet, but as the entire worldwide demand is probably 30 units, it's probably not worth it. In the section where I'm cutting the counterbores on the mill, I did notice that the chips on the surface of the flange started to move with chatter in one of the holes, but that was the only time. A proper custom fixture would prevent that

@AlessioSangalli Год назад

@@MachiningandMicrowaves where did you learn about the properties of lubricants in regards to tool pressure etc?

@MachiningandMicrowaves Год назад

I was talking to a technical adviser at one of my suppliers and he mentioned that one of their clients found a small improvement on fine cuts with aluminium inserts on brass precision parts when they used an oil drip. I thought I'd give it a try to see if the effect was significant. Not sure it is measurably better, but I'm hitting dimensions very reliably with fine balanced cuts. It might be psychological, so I should do some identical parts with and without and see if the dimensions and surface finish are really any different. This is all on CZ121, it's possible the were using Naval Brass or something more exotic or with more lead or something. I need the parts to be gold-plated, so I need to avoid too much lead content.

@AlessioSangalli Год назад

@@MachiningandMicrowaves do you compensate your dimensions to allow for the gold plating? Also, even if it's only psychological, it's good, it does not hurt to have some magic recipes 😅

@campbellmorrison8540 Год назад

@@MachiningandMicrowaves You bring up a point I have wondered about for ages, why do these types of parts get gold plated?

@CaptainKirk01 Год назад

I love your channel. Your way over my head with what your making. I understand some of the electronics concepts, just not the application, I would like some direction to understand how this stuff is actually used? a link or two? Is this the black arts? Are you doing mysterious things with microwaves? I want to know.....we all know what happens in a microwave resonance cascade - the lasagna explodes.

@MachiningandMicrowaves Год назад

I've just bought a new Sony alpha-7 IV with a stabilizing gimbal so that I can take some decent footage of some of these systems in use, but I still have about four months of machining orders to clear before I can start doing some vids about practical applications. I'll get there eventually!

@bottlekruiser Год назад

Nothing to go with a cup of tea like some microwave waveguie machining microwaveguide, if you will

@belatoth3763 Год назад

...righto, so we watch similar channels. I'm hardly wait for the time you say: ...allright guys, this could be a wrap, as always, thank you for watching...

@MachiningandMicrowaves Год назад

Heh heh, it's far too easy to pick up other folks' catchphrases. I'm in real danger of sounding like a certain gent from Vice Grip Garage. Luckily, I can't imagine anyone borrowing my "I think that'll do!"

@belatoth3763 Год назад

@@MachiningandMicrowaves It is more like a crossover in series, viewers love it. Your English and your humour is far more intricate than anyone else's in the machining scene so that is another reason I watch your show.

@MuntyScruntFundle Год назад

A quick note on unusual drills and reamers, I've found ACCU and Shop-Apt really useful. I'm just a bloke in a shed making daft stuff, but they're my go to people when I need something precise. (As well as Cromwell and Cutwel and Trucut and Protool and everyone else!)

@MachiningandMicrowaves Год назад

I use Cutwel, Rotogrip, Accu, Cromwell, MSC and some of the cheapies, but for stuff that I really need to perform, I tend to to to Drill Service of Horley. Cutwel are great for tech support and do a good range of the esoteric stuff from Simtek, plus left/right-handed parting tools and suchlike. I wait for special offers from Cutwel for inserts etc, and sometime take advantage of their "get a free tool if you but 10/20 inserts" deals. Also use Arceurotrade, RDGTools, Chronos, Linear Tools and several others. I had some stuff from Shop-APT a couple of weeks back, they had some good pricing on what I needed. Drill Service do a custom tooling service for really odd tools, and will make up reamers and drills to odd dimensions.

@mkalb4g63 Год назад

Still loving the mix of in. and mm. Some of us just have to be bidimentional.

@MachiningandMicrowaves Год назад

I am entirely AC/DC when it comes to measurements! Angstroms to Megaparsecs via Barleycorns, Ells, acre-feet and British Standard Fingernails

@squelchstuff Год назад

I prefer the term "Bimensurate". It gets some confused looks, shortly followed by a look of understanding.

@MachiningandMicrowaves Год назад

@@squelchstuff Excellent word!

@o0Blackout0o 11 месяцев назад

Amazing video's, really enjoying them! Do you have a video of this in operation or some measured results of the piece ?

@vincentguttmann2231 Год назад

You and AIMEE sound like an old couple. That is to say, everything as entertaining as always 👍

@MachiningandMicrowaves Год назад

She's based on one of my managers from back in the day (Hi Janet!), two of my schoolteachers, a consultant psychiatrist I knew and the Big Sister I never had

@Ashley.0000 Год назад

Its good to see you like Kurtis from CEE. He has a banana ruler lol

@MachiningandMicrowaves Год назад

That banana caliper someone sent him was a masterpiece. Nobody gets to see my out-takes because they are nowhere near as good as Kurtis. I'm trying to train my Chihuahuas to do a Homie impression, but they can't tear the packages open with their tiny delicate teef...

@maximilianjankowski Год назад

YAAAAAAAY new video

@MachiningandMicrowaves Год назад

I'm trying hard to get enough time to do more videos, but the algorithm is really punishing me for taking a break, it's a bit discouraging!

@BuildBreakFix Год назад

Yup only microwaves i know about are ones make my food as I drink with a beer! yet still interesting video!

@MachiningandMicrowaves Год назад

Same sort of microwaves as in a cooker except the wavelength is about 1/20th the size and the power is about a millionth as much as an oven. No use for making dinner but we can use it for a radio link around 60 miles/100km long.

@neffk Год назад

You want a solid carbide hole-starting drill, not a center or "stub drill"

@MachiningandMicrowaves Год назад

Agreed. I tried it initially with a 6mm carbide spotting drill, but it didn't centre the long-series drill properly. Under the microscope I could see why. The long slow-taper drill has a flatter point than the spotting drill and it was catching on one side of the spotted hole, which was a little over 2mm across. Using a centre drill is not a good solution for this, I agree. I bought some 3mm carbide spotting drills and now use those for starting these holes, but then use a carbide 1.8 mm stub drill for the first 8-10 mm of the hole and then finally hit it with the 1.90 mm slow-spiral drill and then the reamer. That seems to give the best results overall, alt least in brass,. The similar parts I make in Tellurium Copper need a lot more care, but the process is similar, and with the tiny spotting drill (and a non-bent 1.90 long-series drill) and 3 mm pecks, I've not had any problems with concentricity or finish. Yet.

@jimurrata6785 Год назад

Alright I just got this notification. 👍

@MachiningandMicrowaves Год назад

Cool! I should have done this on Sunday evening. Right, back to editing the NEXT video now. Thanks v much for checking

@chrisstephens6673 Год назад

I just got notification but watched it yesterday. Somethings wrong with youtube or I've been influenced by the backwash from this old tony's time machine antics.

@jimurrata6785 Год назад

@@MachiningandMicrowaves Thank YOU! for the excellent content.

@MachiningandMicrowaves Год назад

@@chrisstephens6673 Almost everything that happens is down to ToT messing with causality and the spacetime continuum.

@Chriss120 Год назад

love the rocket comments, is that from everydayastronaut?

@MachiningandMicrowaves Год назад

Yep, stolen 100% from Tim. I was so impressed that the Firefly launch control team quoted him. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--HfHAazNM3Q.html

@industry65 Год назад

Is the parting off "Doik" a tool or microphone attribute? Can it be retro fitted to a Boxford?

@MachiningandMicrowaves Год назад

It's all about the acoustics of the machine shop. Also a supersonic microphone helps. We had a lovely NEW Boxford when I was at school in 1969, but I wasn't allowed to use it. The staff were very protective of their precioussss. I had to use the old machines.

@johnydl Год назад

is that a TOT reference I spot? xD

@MachiningandMicrowaves Год назад

I tend to use references from Vice Grip Garage, CEE Australia, Blondihacks, obscure comic strips, songs and, indeed, Tony!

@neffk Год назад

It would probably be better to relieve the shank of that reamer. Do you have a d-bit grinder?

@MachiningandMicrowaves Год назад

Now you have got me thinking. I recall when I bought those reamers that they were supposed to have a very slightly reduced shank for maybe 6m beyond the flutes. On the video though, that reamer certainly doesn't *look* like it's been relieved unless it was done for the full length of the shank. I have a horrible feeling that I could have used the wrong 2 mm reamer on that part as I have an older (cheaper) one as well as the two really good ones. I have an Alexander copy of a Deckel D-bit grinder, so it would be simple enough to modify it. First though, I'm going to check my reamers drawer to see if I picked the wrong one and if the "right" one is indeed relieved. Well spotted

@derkarhu5079 Год назад

Just wondering if you could have used a differential thread mechanism for the adjustment part, say 1 mm and .75 mm pitch, for 0.25mm per revolution of the adjustment collar.... signed: just an amateur

@MachiningandMicrowaves Год назад

The in-out adjustment isn't totally critical, so the 0.5 mm pitch 8mm thread is good enough for this application. There are times that it makes a lot of sense to use differential threads, and I might have some of those in an upcoming video were I need an extremely fine adjustment. There's a good case for using some very closely-matched imperial and metric threads like a 1mm metric pitch and 24 TPI imperial to generate an effective 51 micrometres per turn (~500 tpi).

@derkarhu5079 Год назад

Thanks for your hi Q answer ! I'll keep an eye out, in any case, usually some interesting goings-on at your place :-)

@jimsvideos7201 Год назад

I do wonder how many people understand microwaves and machining as well as you do.

@MachiningandMicrowaves Год назад

I think there are LOTS, just not many daft enough to have a RU-vid channel as well. They are too busy having fun or earning big $$$$$$$$$$$ to be fumbling about trying to make videos as well

@andybtec Год назад

Flamey end! Is that a technical term

@MachiningandMicrowaves Год назад

It certainly is, see the Firefly launch with Tim the Everyday Astronaut for confirmation!

@rallymax2 Год назад

A comment. All hail the algorithm.

@AlessioSangalli Год назад

14:00 Ok here's my problem with DRO's interfaces: they try to be an awkward computer. Also, the typical way dimensions are written on drawings are dumb in a DRO and CNC world. Why not just use full X,Y coordinates with the origin in a convenient location (in this case the center of the part, in others a corner etc). That way 1) the DRO becomes stateless (save for the zero) and arguably quicker and less error-prone 2) one can do a "CAM" pass for manual operations that is a convenient check list.

@MachiningandMicrowaves Год назад

Drives me mad. It's like nothing has changed since 1982 when my lathe DRO was made using TTL chips and discrete through-hole components. Still works perfectly of course. My mill DRO doesn't have a tool offset library, so I have to use the ABS/INC to store temporary location and offsets. I guess there are better frameworks out there, but with everything ending up as G-code and the huge installed base of systems and software using that, it's going to take a lot of effort to change things. My mill doesn't have a fourth "axis" for the quill, so although it does X/Y/Z it doesn't have an absolute Z location. I might run a simple one-axis DRO scale on the quill, but the machine is 60 years old now and it's got this far without anything clever. I would like to get a small CNC for things like waveguide slot array antennas and metamaterials and milled housings that are tedious to do manually, but with the cost of CNC bureau services dropping all the time, it's probably more sensible to outsource the boring stuff

@AlessioSangalli Год назад

@@MachiningandMicrowaves the impact of those services is in fact huge. I helped a coworker cut out an aluminum panel for his flight simulator on my plasma CNC. For the back, he couldn't be bothered to drive to my place and just ordered it from one of those services 😅 he probably did the smart thing. 🤣

@MachiningandMicrowaves Год назад

@@AlessioSangalli Truly, we live in the Future. OK, most of this future is a bit rubbish, but being able to imagine a Thing, do a CAD drawing of it and then have someone magic it into existence on demand in multiple forms and materials almost makes the rest of it bearable. Almost.

@stargazer7644 Год назад

I only watch for the "Weeeeeeeeee!"

@friedrichvonsnatch3501 Год назад

Is this a reupload?

@MachiningandMicrowaves Год назад

Yes, the original had a big problem with not sending notifications, sorry about the duplication. I put out several notes in the Community tab but not all subscribers get those

@friedrichvonsnatch3501 Год назад

@@MachiningandMicrowaves no problemo, cheers for the response

@markhodgson2348 Год назад

Silver plated?

@MachiningandMicrowaves Год назад

Plating the 2mm core guide is tough, it's easier to press in a silver rod or tube and ream it, but then it's a pain to get the connection to plating at the face. Brass is definitely not ideal, but the loss is low enough not to matter much for the specific application of linking the radar chips to testgear. It's reasonably easy to make the cores from Tellurium Copper, but then you have to deal with tarnish or face the problem of internal plating. I'm trying out brush plating with gold (using Potassium dicyanoaurate) and pulling a felted wire through the core as a simple protective layer, but getting a thick enough layer to be conductive down to six skin depths at 122 GHz is hard. Also I have to deal with migration of the copper into the gold. Huge fun

@joaopaulocoelho5401 24 дня назад

I love your videos. However, and in my opinion, I believe that they can be improved if you would able to make a more clear context on what you are building. This is because, honestly, in the point of view of machining, this is not a big deal. But, as an RF device, there are a lot going on and I can see that this is your area of expertise. Be able to pick a little of your knowledge would be the most important part on your videos. That is, I would like to see your videos and learn a little about the microwave project you are involved. For example, where this device will be connected, how it was sized, why the waveguide length must be adjusted, was there some EM simulation,.... I have so many questions :).

@MachiningandMicrowaves 24 дня назад

September 2022 seems like a lifetime ago. There is a new version of the 122GHz radar board appearing soon, so I might do an update that covers the electromagnetics aspects. I guess I was assuming incirrectly that anyone watching would be aware of the very popular Silicon Radar devices and the duplexing cavity approach that is designed to couple the integrated antennas in the 5x5 mm 122GHz system-on-chip full duplex devices. My bad...

@joaopaulocoelho5401 24 дня назад

@@MachiningandMicrowaves Thank you for your answer. Nop.... not very popular from where I come from :). Since working with frequencies in the microwave spectrum requires high-end, and expensive equiments, it is not common to be exposed to practical applications above a couple of GHz.

@markhodgson2348 Год назад

Data set 20

@Landrew0 Год назад

Where can I buy a female insult-bot?

@MachiningandMicrowaves Год назад

I rather think that they find you, then hunt you down and install themselves invisibly on all your devices. Nowhere to run, nowhere to hide.

@igorb4650 Год назад

Your AI really seems having really bad time lately, wonder why

@MachiningandMicrowaves Год назад

She's probably just irritated that I'm not making videos fast enough.

Далее

Machining Microwave Coaxial Low Pass Filters Part 1

39:12

Machining Microwave Coaxial Low Pass Filters Part 1

Просмотров 61 тыс.

How to Make Metal Lathe Chuck Without Milling Machine. DIY Lathe Chuck.

20:33

How to Make Metal Lathe Chuck Without Milling Machine. DIY Lathe Chuck.

Просмотров 684 тыс.

Куда мы движемся? / Дмитрий Потапенко* и Дмитрий Дёмушкин

35:14

Куда мы движемся? / Дмитрий Потапенко* и Дмитрий Дёмушкин

Просмотров 367 тыс.

ТАМАЕВ vs ВЕНГАЛБИ. ФИНАЛЬНАЯ ГОНКА! BMW M5 против CLS

47:36

ТАМАЕВ vs ВЕНГАЛБИ. ФИНАЛЬНАЯ ГОНКА! BMW M5 против CLS

Просмотров 4,4 млн

Его не вернуть #rust #triffon #раст #трифон #стример

00:10

Его не вернуть #rust #triffon #раст #трифон #стример

Просмотров 36 тыс.

СКОЛЬКО ПОЛУЧИТСЯ КАРТОШКИ ФРИ ИЗ 1 МЕШКА КАРТОФЕЛЯ ?

13:53

СКОЛЬКО ПОЛУЧИТСЯ КАРТОШКИ ФРИ ИЗ 1 МЕШКА КАРТОФЕЛЯ ?

Просмотров 1,1 млн

SSB & FM Reception on 122GHz

4:55

SSB & FM Reception on 122GHz

Просмотров 392

Can I Machine Precision Ovals with a Shop-Made Lathe Dovetail Fixture?

26:29

Can I Machine Precision Ovals with a Shop-Made Lathe Dovetail Fixture?

Просмотров 23 тыс.

Making a SELF-CENTERING Boring Bar for GHz Radomes

20:38

Making a SELF-CENTERING Boring Bar for GHz Radomes

Просмотров 17 тыс.

SOLVING the Mystery Behind a Soviet Spy Bug : A True Masterpiece of Technical Elegance!

31:37

SOLVING the Mystery Behind a Soviet Spy Bug : A True Masterpiece of Technical Elegance!

Просмотров 393 тыс.

Machining a Miniature Shaper - The Tool Slide

34:19

Machining a Miniature Shaper - The Tool Slide

Просмотров 23 тыс.

Machining Fixtures, Spacers and custom Collets for 1.3 GHz Coaxial Filters pt 3

27:38

Machining Fixtures, Spacers and custom Collets for 1.3 GHz Coaxial Filters pt 3

Просмотров 14 тыс.

Precision Machined Body for my 1.3 GHz coaxial low pass filter

25:11

Precision Machined Body for my 1.3 GHz coaxial low pass filter

Просмотров 11 тыс.

Inductor Tester

10:01

Inductor Tester

Просмотров 76 тыс.

Machining an Aircraft Tracking Antenna Mount ADS-B - OpenSky

14:08

Machining an Aircraft Tracking Antenna Mount ADS-B - OpenSky

Просмотров 9 тыс.

No Way That Was Done With A File ! ..... But, Seeing is Believing :)

18:30

No Way That Was Done With A File ! ..... But, Seeing is Believing :)

Просмотров 36 тыс.

ПОКУПКА ТЕЛЕФОНА С АВИТО?🤭

1:00

ПОКУПКА ТЕЛЕФОНА С АВИТО?🤭

Просмотров 2,9 млн

С iPhone точно не укачает!

0:41

С iPhone точно не укачает!

Просмотров 263 тыс.

iPhone 12 socket cleaning #fixit

0:30

iPhone 12 socket cleaning #fixit

Просмотров 46 млн

НЕДЕЛЯ с iPhone 15 Pro - ПРАВДА о которой все МОЛЧАТ! | ЧЕСТНЫЙ ОТЗЫВ

22:41

НЕДЕЛЯ с iPhone 15 Pro - ПРАВДА о которой все МОЛЧАТ! | ЧЕСТНЫЙ ОТЗЫВ

Просмотров 82 тыс.

Почему Играть на зарядке в Samsung, можно? #Shorts

0:36

Почему Играть на зарядке в Samsung, можно? #Shorts

Просмотров 1,2 млн

Убийца флагманов 2024? Обзор Realme GT 6

26:10

Убийца флагманов 2024? Обзор Realme GT 6

Просмотров 25 тыс.

Вот ЧТО НУЖНО ДЕЛАТЬ, если в ваш телефон ПОДГЛЯДЫВАЮТ‼️🔥

0:16

Вот ЧТО НУЖНО ДЕЛАТЬ, если в ваш телефон ПОДГЛЯДЫВАЮТ‼️🔥

Просмотров 6 млн