Тёмный

Magnetizing the Invictor Tactical Warsuit to use both main weapons 

Good Enough Wargaming
Подписаться 2,3 тыс.
Просмотров 13 тыс.
50% 1

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 41   
@GoodEnoughWargaming
@GoodEnoughWargaming 5 лет назад
I'm also celebrating the fact that I did this without gluing anything to my fingers, including but not limited to, my other fingers.
@ptitbass
@ptitbass 5 лет назад
i use a piece of paper between the magnet and the rest of the other magnets to separe it when i put a magnet in the hole where there is glue. A trick that work like a charm.
@admiral_ej5765
@admiral_ej5765 Год назад
Thank you!! Managed to build my invictor after weeks of hesitation
@GoodEnoughWargaming
@GoodEnoughWargaming Год назад
Nice! It's always daunting to start knowing if you mess it up there's no going back
@GreyHunter88
@GreyHunter88 2 года назад
This was great! I'm always hesitant to magnetize because I find the process stressful, but this method was pretty painless. It worked really well, too. Feels a lot better to have both weapons as an option now, given there's no obvious pick like there are with some kits. Thanks for sharing!
@GoodEnoughWargaming
@GoodEnoughWargaming 2 года назад
Glad it helped! I like to magnetise only because I'm to cheap to buy twice ;)
@medusawhitewolf8498
@medusawhitewolf8498 6 месяцев назад
Thank you! This helped me with not just the invictor, but learning to not be scared to magnetize my minis in general!
@GoodEnoughWargaming
@GoodEnoughWargaming 6 месяцев назад
Nice. Just don't get too obsessed with magnetising everything ;) I've a few models in the pile of shame I'm putting off building until I work out how to magnetise them.
@rain6353
@rain6353 Год назад
Thanks for the vid. Wanted to repeat just how important it is for them to be flush. all but one magnet in the cog was SLIGHTLY sticking out and it was enough to push the gun apart. Filed it down and it fits proper.
@RogerVicki
@RogerVicki 2 года назад
Thanks for the help I received a warsuit for Christmas and been thinking about how to use both guns and thanks to you I now know what to do
@GoodEnoughWargaming
@GoodEnoughWargaming 2 года назад
Glad you found it useful. Just take your time and always check the magnets polarity twice. Then check it again.
@irapalmer734
@irapalmer734 5 лет назад
I just finished three sets of magnetized weapons for the invictor. Generally, this is a great method. I found that a dremel high speed cutter bit worked better than a 3mm (1/8) drill bit for boring out the holes in each side of the weapons. I used a cordless drill with either a 1/8 bit or the dremel high speed cutter (#193) to do all the holes. I found that it was effective to put bit #74 down on a piece of wood with blue tac then drill. It was also helpful that the drill bit I used had a small hole starter point, it made drilling the pilot hole unnecessary.
@GoodEnoughWargaming
@GoodEnoughWargaming 5 лет назад
I don't like to use the Dremel for this just because I like the control you get with the hand drills, but if you can get the Dremel to work for you then it'll certainly speed things up.
@irapalmer734
@irapalmer734 5 лет назад
@@GoodEnoughWargaming I used a dremel bit in a cordless drill rather than a dremel tool. The cordless drill doesn't spin as quickly, but plenty fast for plastic. You could also use a dremel with a variable speed.
@irapalmer734
@irapalmer734 5 лет назад
Also I didnt have a hand drill.
@GoodEnoughWargaming
@GoodEnoughWargaming 5 лет назад
@@irapalmer734 that usually guides the choice of tools to use :)
@irapalmer734
@irapalmer734 5 лет назад
@@GoodEnoughWargaming Since I'm talking through my whole process here. I was doing three sets of weapons and joints at one time. I wanted all the weapons to work with any joint. To do this it was important that the polarity of each joint and weapon was set up the same way. I made sure to mark each joint which direction was facing forward and then make sure the polarities matched based on that orientation.
@MotoErgoSum
@MotoErgoSum 3 года назад
Oh god... I would have made a mold and copied that bit in green stuff before drilling and practiced on one of the copies first. Might do that as I'll be building two of these.
@mid-lifecrisis3622
@mid-lifecrisis3622 3 года назад
This is so helpful thx, I'm about to magnatise my in invictor warsuit.
@lgyamjr
@lgyamjr 4 года назад
Great video thanks. Just about to embark upon this process and will definitely follow this method
@GoodEnoughWargaming
@GoodEnoughWargaming 4 года назад
Good luck
@lgyamjr
@lgyamjr 4 года назад
@@GoodEnoughWargaming mission successful! Two invictors done and only 4 cuts to the fingers (that's a win) thanks again for the tutorial it was really easy to follow
@GoodEnoughWargaming
@GoodEnoughWargaming 4 года назад
Nice, hope you didn't get too much blood on the model ;)
@Jimmy-pf7kr
@Jimmy-pf7kr 2 года назад
Great stuff man! Goin to do mine finally
@ger5956
@ger5956 3 года назад
Super helpful video, thank you! Liked and subbed 😁👍🏻
@GoodEnoughWargaming
@GoodEnoughWargaming 3 года назад
Thanks, I'm just working on the new gladiator tank, should be done in a day or two ;)
@ger5956
@ger5956 3 года назад
@@GoodEnoughWargaming that’s awesome! I’m waiting for my Gladiator to be delivered, so I’ll look forward to that video. Have fun and stay safe 👍🏼
@ptitbass
@ptitbass 5 лет назад
Thanks for this video. Yeah in the redemptor dreadnough there was 2 pivots.. annnd offcourse they wouldn't do the same in this kit like the redemptor kit..
@GoodEnoughWargaming
@GoodEnoughWargaming 5 лет назад
I actually did the same process on my redemptor as I did here. I've probably still got the old sprue somewhere.. I think this way of magnetizing it is probably the easiest even with two pieces.
@ptitbass
@ptitbass 5 лет назад
@@GoodEnoughWargaming i agree.. way simpler than when i did the redemptor
@MuphynDragon
@MuphynDragon 4 года назад
i much prefer this method to spikey bits method of cutting into the part and adding a bit of sprue
@GoodEnoughWargaming
@GoodEnoughWargaming 4 года назад
Thanks! I usually try to keep things as simple as possible.
@gmorlang
@gmorlang 4 года назад
I literally was about to use Spikey’s method and thought, “hmmm, let me do one more search on RU-vid.” Glad I did!! This way is was easier and cleaner looking!
@davidma6616
@davidma6616 3 года назад
Good video, let’s get this channel to 1K subs.
@GoodEnoughWargaming
@GoodEnoughWargaming 3 года назад
Thanks!
@Tr1ckyD84
@Tr1ckyD84 5 лет назад
Good informative video, any chance of a tutorial for magnetizing the fist hand and boltgun pistol?
@GoodEnoughWargaming
@GoodEnoughWargaming 5 лет назад
If I ever get another one I will but it's not likely in the near term, I'm saving money to blue on the Christmas battle boxes... I tend not to magnetise the visual options only the weapon choices, to many bits to lose.
@dinosuarman13
@dinosuarman13 Год назад
So I know this video is old, but if you super glue something wrong and it's a fast drying glue, you can stick it in the freezer overnight to make the super glue brittle
@bobdole8830
@bobdole8830 2 года назад
it's cheaper if you fill the center with green stuff and place one magnet at each side
@TheHiscock
@TheHiscock 3 года назад
Would this work with 2mm by 1mm magnets? I ask because that what I have and I’d like to finish building this model.
@GoodEnoughWargaming
@GoodEnoughWargaming 3 года назад
Probably. I don't want to say it 100% will because I haven't tried it, but the ones I used have a good grip so slightly smaller should still work.
Далее
How To Paint The Primaris Invictor Tactical Warsuit
43:12
MAGNETS: Helpful, Economical, and Really ANNOYING!
14:42
How to magnetize the Primaris Repulsor tank
6:20
Просмотров 14 тыс.
Building a Tiny Office Pod Under My Stairs
51:47
Просмотров 7 млн