No video :(

Maintaining a Perlick Forward Sealing Beer Faucet w/600 Series Parts List

Подписаться 1,7 тыс.

Просмотров 17 тыс.

50% 1

In this video, Paul from Rapids Wholesale takes apart a Perlick (Perl) Forward Sealing Faucet (Series 600 Perlick Beer Faucet) to go over the parts, washers, and gaskets that you will want to check and clean regularly. He does speak briefly of the advantages of a forward sealing faucet over a standard beer faucet with a shaft.
Perlick beer faucets, forward sealing faucets and parts are all available for purchase at rapidswholesal...

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@zachmalecha579 9 месяцев назад

Thank you. This is the only video that talks about the forward sealing O-Ring!

@Ken-rw5ds 2 года назад

Thanks for the video Paul. How do you remove and the replace the forward sealing O ring?

@bassickcris9344 2 года назад

I wanted to see the magnets that are inside these things

@echardcore 5 лет назад

After disassembling my Perlick 630SS, it seems that tje compression bonnet takes a different gasket than the 9P206. It is an L-shaped gasket. The 9P206 is flat.

@doncameron7600 3 года назад

Hey Paul, I have a 680SS creamer draft faucet. I can sneak the bearing cup off but am unable to remove the lever handle. Is the disassembly and gaskets the same for the 680SS model as the ones listed in this video? or should I be looking at a different video and parts list?

@echardcore 5 лет назад

Also after using my new gaskets, the forward sealing gasket doesn't seem quite OEM. I don't get a full seal with the faucet closed. There is a slow leak. If I open and close the faucet a 2nd time, it seals.

@Rapidswholesale 5 лет назад

That's bizarre, I wonder if there is any needed for these to "break in" so to speak..? Let me know if this persists. We might need to send you a new set. -Paul

@echardcore 5 лет назад

@@Rapidswholesale I may have over tightened everything. I wound up purchasing the gaskets from somewhere else to compare. I have to do so with the other faucet but I won't replace them. I'll disassemble and clean and tighten correctly and try that. Thanks for the reply!