Replacement and control of modules: transfer, fusing, drum unit, cleaning optics and paper pickup rollers. Stapler and booklet test. Ricoh Aficio MPC3003, MPC3503, MPC4503, MPC5503, MPC5003 color photocopier how to properly maintain the device.
PART REPLACEMENT PROCEDURE
1. Enter the SP mode.
2. Output of SMC registration data using SP5-990-004.
3. Set the following SP to "1" before turning off the power.
4. Replace the PM parts and turn on the power, then the device will automatically reset the PM counters. In the case of a developer (developer), the initiation will also be done automatically.
5. Exit SP mode.
AFTER INSTALLING THE NEW PM PARTS
1. Turn on the main power switch.
2. Output the SMC logging data with SP5-990-004 and check the counter values.
3. Make sure that the PM counters for the replaced units are "0" with SP7-803. If the PM counter
for a unit was not reset, then reset that counter with SP 7-622.
4. Make sure that the exchange counter counts up with SP7-853.
5. Make sure that the counters for the previous units (SP7-908) on the new SMC logging data
list (from step 2 above) are equal to the counters (SP7-803) for these units on the previous
SMC logging data list (the list that was output in the "Before removing the old parts" section).
6. Make sure that the unit replacement date is updated with SP7-950.
Are you interested in cooperation? Very good. Feel free to contact: copy-expert@wp.pl
You can add subtitles in your language, welcome: www.youtube.com...
For filming I use:
Camera: SONY HDR AS200, GOPRO HERO 5
Palette lighting: Sachtler Reporter 200D + 2x400W constant light lamp
Microforn: Trust GXT 252 + Emita Plus Steraming
Movie editing program: WonderShare Filmora
Spare parts for copiers www.copy-expert...
Facebook: / copy-expert-1134316788...
Used parts www.copy-expert...
Ricoh Copier Service Warsaw sprintprintserw...
19 сен 2024
