Make A Knife With Cheap & Basic Amazon Tools | Knife Making

Подписаться 104 тыс.

Просмотров 699 тыс.

50% 1

Get into the knife making game on a budget! This is how you start making knives with a fairly low cost to entry in your garage or home shop (probably with tools you already own). The cheap tools used in this build can be found on Amazon and can get you working in no time. So hopefully this video will give yall some ideas for crushing your day from home while in quarantine!
Skinner PDF - / 44182621
Filing Jig - • How to make and use a ...
🔨Tools Used:
Angle Grinder - amzn.to/39GEUhU
12’’ Bastard File - amzn.to/2UVUQaS
3/8’’ Drive Drill - amzn.to/3aECPV9
Digital Calipers - amzn.to/2Z6EsUZ
Chain Saw File: amzn.to/2LH4Ly2
Jig Saw 5AMP - amzn.to/2Jx2zH2
C-Clamps - amzn.to/2x1mdbB
Sand Paper Pack - amzn.to/3dZXxRw
Auto-Center Punch - amzn.to/2yppeCM
⭐Want to support the channel and also gain access to my knife templates? Become a patron here - / redbeardops
🔥Heat Treating:
Watch this Video to make mini-forge - • How To Make A Mini For...
How to HT 1084 Tutorial - • How to Heat Treat 1080...
Soft Fire Brick - amzn.to/3aEMtHd
Bernzomatic TS8000 Torch - amzn.to/34d8vP6
⚠️PPE:
Resp-O-Rator (for beards) - amzn.to/2M6PMN7
Basic Respirator - amzn.to/2xLvxjE
Cheap Ear Plugs - amzn.to/2UEFY1J
3M Bluetooth Hearing Protection - amzn.to/38ock4U
✅Materials:
Brass ¼’’ Rod - amzn.to/2UCoR0d
Canvas Micarta Scales - amzn.to/39Dq6k7
Canvas Micarta Alternative - www.alphaknife...
1084 Steel - amzn.to/2UE2ZSv
1084 Steel (Alternative) - www.alphaknife...
✅Epoxies:
Epoxy Testing Video - • Epoxy Comparison | G-F...
G-Flex Epoxy - amzn.to/2UDSWwA
BSI Mid Cure Epoxy - amzn.to/2Jx4dZe
CA Rouge Epoxy (Alternative) - www.combatabra...
🗡 Beginner Knife Builds Like This One:
Knife From Kit - • The Easiest Way to Sta...
Knife Making 101 - • Knife Making 101: How ...
🗡 Advanced Knife Builds:
Twisted Damascus Bowie - • "That's TWISTED!" -- L...
Insane Fantasy Build - • "This is Madness!" -- ...
Takedown Bowie - • This BOWIE took MONTHS...
**************************************************
Subscribe Here: / @redbeardops
**************************************************
IInstagram: / redbeardops
✖️ | Twitter: / redbeardops
Facebook: / redbeardops
#knifemaking
#howtomakeaknife
#redbeardops
**********************************************************
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and I will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@RedBeardOps 4 года назад

The free template for this knife is linked to in the description. If you want access to all RBO templates they're on my Patreon - www.patreon.com/RedBeardOps

@ScrapMetalTherapy 4 года назад

I wish I had such a guide when I started making knives a few years ago. Perfect guide, 30 minutes passed by like 30 seconds. And some humour as well :) Great job mate.

@RedBeardOps 4 года назад

Hey man, I really appreciate your comment! I'm hoping that maybe it can get some people into the game of knifemaking!

@SeyriwebBlogspotTr 3 года назад

you should look at this :: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tTIj5-fgg5w.html

@liamryan7614 4 года назад

"If you grow a beard you will gain 10% in strength and your awesomeness will also go up" HAHAHA Subscribed!

@RedBeardOps 4 года назад

Hell yeah, thanks Liam! Glad you liked it!

@neverlandxx73 4 года назад

@@RedBeardOps ditto subbed too :)

@gopro2804 4 года назад

Didn’t work for my girlfriend. She’s only 9% stronger. And I don’t like her beard!

@crashdummy40 4 года назад

@@RedBeardOps idk if you ever noticed but the more polished blade is it's harder for the patina or cold blueing to set it. But more so a patina issue. I struggled to the point of frustration. Last blade i was doing i was lazy on the polish said screw it. Patina was much more efficient. I roughed up the other blades a tad it made a significant difference in all 5 of my blades i did a patina on.

@hebelphilippe3311 4 года назад

one problem, i dont have enough hairs! -10% strength for me.

@NRiggiKnives 4 года назад

Great job as always James. I had a similar experience when I started making knives- but I purchased everything from Harbor Freight. I made a bunch of blades with minimal equipment- then moved to a 1x30- whatever it takes but the important thing is that is can be done.

@RedBeardOps 4 года назад

Awesome Nick! In reality you could do this whole project with a drill and a file! I started in a similar manor as you did. Thanks for your comment!

@shaynebates912 3 года назад

I loved your honesty. Yes you can make a knife with cheep tools, yes it will work, yes the feeling of accomplishment is second to none, but to make something truly great it sometimes requires just that step above. That could be time, equipment, skill (from doing/learning) or just a continued love of what your doing and trying to better it and yourself. Either way for me nothing compares to the felling of achievement and the joy I get from making simple knives for my family and friends that I have been able to make from watching people like you. So thank you.

@RedBeardOps 3 года назад

Thank you very much for your comment Shayne! Much appreciated.

@sudo_nym 4 года назад

There are a couple of take-aways here, for me (a knife-making noob, but knife fan of over 40 years) 1) The chainsaw file plunge idea is inspired! How I wished I'd seen THAT idea when I started making this knife! 2) The chainsaw Spanish notch idea afterwards makes a lot of sense, too. Cheers James, for the info and PDF! (I saved it 😉) Keep safe! 🇬🇧🤜⚡️🤛🇺🇸

@RedBeardOps 4 года назад

Heck yeah man! Glad you liked this one. That chain saw file has been damn handy for me! lol

@matthewmcnabb7437 4 года назад

Very informative video. Wish I had a tutorial like this when I started knifemaking. A simple yet in depth look, very through on the points that really matter for beginning knifemakers.

@RedBeardOps 4 года назад

Hey Matthew, I really appreciate your comment! That is exactly what I was going for. Cheers man.

@brucecapitell7337 4 года назад

I've watched tons of videos on knife making. Step by step with full explanations, this one was probably the best I've seen for people who don't have all the equipment like a forge and belt grinder. Subscribed!

@RedBeardOps 4 года назад

Thank you sir! Glad you enjoyed this one. I really appreciate your comment!

@RedBeardOps 4 года назад

@@meyou-mk3qz Make Everything has a great channel! I haven't "ripped anyone off" though. ? Sorry you feel that way. Hope you have a great week!

@badmfthompson7820 3 года назад

@@meyou-mk3qz that channel does not exist

@Maggioretom 4 месяца назад

A full users manual on "How to make", well explained and full of useful tricks, not only for beginners! Ty very much for your work!🙏

@RedBeardOps 3 месяца назад

Glad it was helpful! You'll love the video I have dropping tomorrow!

@exhaustedpacman1233 2 года назад

Hey!! I wanted to let you know I have been working on getting into knife making, and your channel has been a huge source of information for me. I just quenched my first blade and got it hard enough to skate a file. My blade also started out life as your skinner design, and I had to make a few adjustments. Thank you so much for your videos.

@RedBeardOps 2 года назад

Good luck man!

@shdyximtk5348 3 года назад

Stuck at home during lockdown, was bored as hell, needed a new edc knife, found this video. Thank you very much!

@RedBeardOps 3 года назад

Heck yeah! Glad you enjoyed it!

@JorgeVelazquez09 4 года назад

My man, you are an absolute genius! I grew up in a machine shop with mills and lathes, you have done the equivalent on a much lower budget. I love it. Great looking knife!

@RedBeardOps 4 года назад

Thanks Jorge! Really appreciate your comment! I'm still learning on the milling side... lots to learn. Hope to see you around the comment section to learn me up!

@JorgeVelazquez09 4 года назад

@@RedBeardOps Major props for displaying the TEXAS flag, as you can tell from my pro pic, I'm also Texan!

@VIDEOEPPO 4 года назад

Rather than watching so many videos, I should have this one video...30 min approx..but loaded with information. I am going to try knife making on my channel and a big thank you for this video. This is a proper video that gives out all necessary information for a beginner

@RedBeardOps 4 года назад

Heck yeah man! Glad you enjoyed it sir! Good luck with your channel!

@victorkempe5661 4 года назад

As a bearded man myself i can say its true about beard giving you AWESOMENESS and Strength

@RedBeardOps 4 года назад

Heck yeah Victor! 100% accurate!

@ulisses.cavalcante 2 года назад

Wow. So much quality information in under 30 minutes. Thank you, sir.

@RedBeardOps 2 года назад

Glad it was helpful!

@waynewalker315 4 года назад

Absolutely enjoyed every second, especially the ending. Doing things like that gives you so much information about how you did on your heat treatment as well as handle construction. Great video as always brother!

@RedBeardOps 4 года назад

Thanks Wayne! I do wish I would of thought about ordering some soft fire bricks before taking on this project... would of had much better HT results, but hey... live and learn. Thanks as always for the comment. Cheers!

@MakersMovementDIY 3 года назад

Very cool primer for beginners. This should help get anyone stated on a makers journey.

@RedBeardOps 3 года назад

I hope so!

@TheBarnacleBlimp 4 года назад

What a thorough and comprehensive video. Knife making in new to me and I thoroughly enjoyed this video. I have to say the costing aspect really gave a new dimension to the possible taking up of this hobby. While a lot of people will have some of the tools and some may have all, it shows the potential knife maker that you can start cheaply and progress with better equipment as your skill levels improve too. Great video, thank you.

@RedBeardOps 4 года назад

Hello sir! I really appreciate your comment! My exact goal with this video. Really happy you enjoyed it

@TheBarnacleBlimp 4 года назад

@@RedBeardOps I have subscribed and look forward to more great videos. Many thanks Brian.

@bigviper64 Месяц назад

Thank You! This was a perfect video for me, I am “thinking” of getting into knife making and you have made this less worrisome.

@RedBeardOps Месяц назад

Heck yeah! Good luck with your build. Cheers man

@Dearoldad 4 года назад

Thank you from a veteran with 34 years in, getting ready to retire and begging for a hobby.

@RedBeardOps 4 года назад

Heck yeah, thank you for your service sir! This is a great hobby man. You won't be disappointed!

@Aleeknives 4 года назад

Amen bro! This is a great way to pass the time!

@richardnineteenfortyone7542 4 года назад

Hobbies to avoid: telescope mirror making, ham radio, soaring, sailing, oboe playing, stock trading, golf, harmonica, and a few others. The knives I have made were made from rebar, so they are not as robust as the one in this video. For everyday carry, I like a Swiss Army knife... because it has a phillips screwdriver.

@miso1002 3 года назад

Vegans and vets have similarities

@scrappybobbarker5224 3 года назад

How to make the best of it and I got some food out of the refrigerator what did I get you might ask that's right I got some food out of the refrigerator what did I get you might ask that's right you have a good day I love you so what do you mean by this afternoon to get to the bottom of the things you say you were going the other way around I can tell you that I love you an somegot Id food outside and it helped you get the package 📦📦📦📦📦📦📦 you are doing well and that you are doing well and that he is not 🚭 you I will get you might ask that's right ▶️⏯️ you are very beautiful and I love 💕 you are very welcome to be a good day to come in and talk to him I will be there is to do a little more research your day going baby 🐥 you are doing well and that you have a wonderful night and I got some you can bring it to you all and I got a good day sir please 🥺 you have any I can do that for you and I can go to the store and get to hevean they are you can you please try I'm not sure if I can make it to the meeting tonight I can do that day but I will get you might ask though I don't understand please I have not received it yet but I will let you know you are doing I hope your family is you can use I will be there on the cros there are a few be ⛑️ it to you and your family you and I got s willIo food out me in the I th and Oink oink she's going to be morning a and Intended afternoon and I will get back to you on that afternoon pink ones that's togo to hear if you want talk today or tomor Gerrie you are very welcome to come by this afternoon to get to the bottom of this email 📨📨 to be a good day to come in and talk to you soon and have a great day and I will be there at the same time I don't have to work at a woman♀️♀️♀️ to get to the bottom of this email and I will be there at the same time I don't have a great time in the morning and to

@MrTommybadger 4 года назад

The angle guide for your file is brilliant and simple. That's what's it all about.

@RedBeardOps 4 года назад

Cheers sir! Thanks for your comment!

@adam7.633 4 года назад

I appreciate that the video without music so we can feel the work you put on this nice job.

@RedBeardOps 4 года назад

Cheers sir, Thanks for your feedback. Have a great weekend and thanks for watching!

@bushna2007 4 года назад

10% awesomeness and strength? Priceless!

@RedBeardOps 4 года назад

Lol, glad you liked it Owen! Cheers man have a good one.

@H2OMANLV 4 года назад

What a great video!!! Even for those of us that have been making blades for awhile, reminds us of when WE first started. AND GOD BLESS THE GREAT REPUBLIC OF TEXAS!!!

@RedBeardOps 4 года назад

Heck yeah man, glad you liked this one. Texas is the best state in the USA for sure, hands down.

@toastrecon 4 года назад

Dude, genius. Thank you!

@RedBeardOps 4 года назад

Glad you liked it sir! Have a great Sunday!

@Imwright720 2 года назад

Super useful especially with the chainsaw file for the plunge.

@RedBeardOps 2 года назад

Glad it was helpful!

@scottriddle5468 2 года назад

Dude your channel is killer. Seeing you test the knifes endurance was good. I'm learning how to make my own knives so this video did help alot. Thanks Red Beard

@RedBeardOps 2 года назад

Heck yeah, glad you liked it Scott!

@jonreno4389 4 года назад

Usually Videos talking about simple tools are complete bs. This guy did it right tho, Amazon tools and a torch for edge hardening. Finally I'll be able to heattreat the stuff I make.

@RedBeardOps 4 года назад

Heck yeah Jon, thanks for your comment!

@SeyriwebBlogspotTr 3 года назад

you should look at this :: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tTIj5-fgg5w.html

@daveintheshed4870 4 года назад

This is how I started, it's a great way to get started and turn out some really cool blades.

@RedBeardOps 4 года назад

I agree, thank you sir!

@a.g.silverbane6335 4 года назад

I am very much a beginner and really appreciate all the links to other makers and helpful videos that you shared during the video. Thank you for the great content.

@RedBeardOps 4 года назад

THank you very much sir! Good luck on your journey!

@mbarker_lng 4 года назад

One thing that is helpful with the angle grinder: Save worn sanding discs for the edge work. It will be slower, but a little more forgiving. Still must be careful though. Same is true of cut off wheels. I save some that have worn down (smaller radius) to get into tight spots. Dont take them all the way down to the drive-dog of course- they will break apart at some point.

@RedBeardOps 4 года назад

Great tip! The're a useful tool for sure. You can do a lot with an angle grinder.

@caleb3476 4 года назад

this was absolutely perfect

@mightymik3yb1008 4 дня назад

The seriousness of the beard joke was excellent man. No change in tone lol had me rolling

@RedBeardOps 4 дня назад

lol, glad you liked it!

@simonforeman261 4 года назад

I made a tanto out of an old file using only a grinder and diamond stones. Oh and torch for soldering the habaki.

@RedBeardOps 4 года назад

Very nice sir!

@andrewcampbell2955 2 года назад

Your health and Safty is amazing, the beard part is so true. 🤣🤙🏼 thanks for the great video.

@SOCMMOB 4 года назад

I’ve got a grinder and a hacksaw, I’m gonna make an Ultratech clone.

@RedBeardOps 4 года назад

Good luck SIr!

@jeremypetix4493 4 года назад

Your filing jig is genius. I’ve done a ton precision file work, and I can’t tell how much time this would have saved me compared to other filing methods I used.

@RedBeardOps 4 года назад

It is awesome. Got it from here - Filing Jig - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r9iNDRwwBQQ.html

@nt_wicked_bunch2717 4 года назад

Cool to see a video like this! I started out with all amazon bought tools and as Walter Sorrells put it I “polished a turd” tools really didn’t last more than a few knives, a few rounds of those tools and wouldn’t you know I’m still a turd polisher😂 getting better though!

@RedBeardOps 4 года назад

Very cool sir! Thanks for your comment!

@swapnilmule3922 4 года назад

Wow...I just watched first 4 mins of the video and I am writing this comment....you have made a great video...with such good detailed information giving in the corner. Let me see a full video...thanks brother...you are an awesome RU-vidr.

@RedBeardOps 4 года назад

Thank you very much sir!

@JKoehr27 4 года назад

Harbor freight has large propane a torch for weeds at 20$ that can connect to your standard bbq tank. I use it for lighting up my smoker also.

@RedBeardOps Год назад

Have a great day!

@djmartin6852 4 года назад

I love finding a fellow TEXAN !!!!!!!!!!!!!!!!!!!!!! on youtube subscribed

@RedBeardOps 4 года назад

Thank you very much DJ!

@HalfInsaneOutdoorGuy 4 года назад

you the wooded beardsman's brother? damn sir! Also doing exactly what this video shows for my own channel over the past few months. I'm working and learning as I go. Thank you fro teaching me another slice of what I need to know!

@RedBeardOps 4 года назад

Awesome man, glad you enjoyed it! Thank you!

@gavsgav90 2 года назад

Thanks!! I’m about to start making my first knife and so far your videos have helped me loads. I really Appreciate the hard work you put in!

@RedBeardOps 2 года назад

Hey yeah, Garry. I have a video coming out in about 20 min that you'll love when researching making your first knife. Cheers

@gavsgav90 2 года назад

@@RedBeardOps Thank you. I will definitely check it out right away. So far at least I have the steel resembling that of a knife, but it still needs a bit of persuasion before it can call itself a knife 😄

@Aleeknives 4 года назад

Once again another excellent production! I especially like how you went to hand sanding in your filing jig that was a neat idea

@RedBeardOps 4 года назад

Thank you sir! I made a good deal of knives on that jig! If you have the patience you can turn out some great products with it. Glad you enjoyed this one, have a great day!

@Satria7ati 3 года назад

I really apreciate your safety explanation dude.. Thanks, so usefull 100% 👍👍

@RedBeardOps 3 года назад

Happy to help!

@mattstratemann7430 4 года назад

If this video doesn’t get get a person who is thinking about getting into knife making off the fence, I don’t know what will. Another great video!!

@RedBeardOps 4 года назад

Thanks Matt! That's the goal for sure! Thanks for your comment.

@codyorvis6598 4 года назад

Another good video like this is one from outdoors 55 grinder knife

@Sct5mn 4 года назад

Great video. I’ve made my knives using tools I have laying around at home and love seeing what’s possible on a low budget.

@RedBeardOps 4 года назад

Right on man! Glad you liked this one.

@jasonwilliam2125 4 года назад

That gaining 10% strength with a beard = new sub:)

@RedBeardOps 4 года назад

Heck yeah, thanks Jason! Have a great week!

@jezzgates67 Год назад

Great teaching video again👍 You have definitely given me the confidence to try a few of these techniques before I commit to buying a whole load of forging equipment and tools. Great looking little knife too. Thank you sir. 👍

@RedBeardOps Год назад

Glad you enjoyed it! Cheers

@HWPcville 4 года назад

I'm currently making a knife for a friend using ordinary hand tools and a thought occurred to me. Know the difference between a $50 knife and a $500 knife? About 5 hours of polishing. I don't make a lot of knives and I've never sold one (I manage to give them away) so I'm making him a $50 knife. Thanks for your tutorial, it will definitely help beginning knife makers on a budget. Update: I believe Geough is pronounced "Jeff". The "gh" is a soft "gh" as in "enough". Update to the update: Well I was wrong. I watched Geough's video and it sounded like he said "guff".

@RedBeardOps 4 года назад

Man I'm terrible with names. You're 100% right on the polishing... Teaches for patience for sure.

@JoeDebono 4 года назад

Gough is pronounced “goff”. (gh as in cough)

@papi4308 Год назад

I cannot begin to express the gratitude for this video! I will begin making knives with my youngest brother very soon & as much as I want to get all the GOOD gear and I will eventually I have an itch to start as soon as possible, and this gave me so many good ideas to get going! Unfortunately, the "pretty" fence my girl wanted for our new place took priority and that is OK, safety for our pup comes first!! Long story still long, THANK YOU R-B-O ! The very end of the video killed me, thought it came out great but much respect for showing us newbies the realities, pros and cons of knife making in this aspect!!! You are awesome!

@RedBeardOps Год назад

Thank you very much sir! Glad you enjoyed the video! Good luck with your builds!

@justicar5 4 года назад

their are guides to make a heat treat oven with a large can, and some fire clay, and a socket for the torch to sit in.

@RedBeardOps 4 года назад

Yep those would be good options for this project. Cheers sir!

@Ravigyne 4 года назад

Safety briefing during the 'boring' bit. Instant sub right there.

@RedBeardOps 4 года назад

Lol, thanks man

@Ravigyne 4 года назад

@@RedBeardOps Its wort it. Most creators kinda gloss over the most important part. Can't make anything pretty if you are blind, or worse.

@samoanSAIYAN 4 года назад

I actually watched to see your Beard but man, you put out one fkn good good video! SUBSCRIBED!

@RedBeardOps 4 года назад

Heck yeah! Thanks man, glad you liked it. Have a great weekend!

@MrDragonUTube 3 года назад

Don't be too hard on yourself. You did say budget build with cheap tools. That was an awesome tutorial!

@RedBeardOps 3 года назад

Thank you, Charles! Glad you enjoyed this one.

@funnymanhaha6329 3 года назад

If you REALLY have a lot of time you could make a knife using only a file, I actually tried it and only got it really roughly shaped it took about 40 hours in total or maybe less but I almost lost my mind.

@RedBeardOps 3 года назад

This is true! And I would lose my mind as well!

@BoxingMoogle Год назад

I’m just getting into bladesmithing and am fortunate enough to have bought a forge, anvil and belt grinder, but I love the work you’ve done with just basic tools. I was feeling pretty overwhelmed when it came to fitting the knife scales, but your technique in this video is very approachable. Thank you!

@RedBeardOps Год назад

Good luck with your build! Check this one out too ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7Zio-gupl-U.html

@MrSoloun 4 года назад

Interesting and well explained and discussed as always, good stuff. I couldn't help but cringe at the end with the testing hehe. Yea it looked a bit cold when you quenched but that's the limit of that method as you said and the little brick forge will overcome that for very little extra outlay.

@RedBeardOps 4 года назад

Thank you! Yeah, wish I would of bought a couple of small bricks before this project, but hey... part of the learning. Cheers man.

@adrianbadea1179 4 года назад

Try some charcoal and a fan blower next time 😉 You can use a cheap fan to make a blower.. And some bricks to build a small forge 👍 Appreciate your effort

@secure844 3 года назад

This video reminds me why I like belt sanders.

@RedBeardOps 3 года назад

For sure, Rob! I agree!

@whiteskullz 4 года назад

I had this sitting in my recommended for a while, and I was hesitant to watch it, but I'm glad I did. You've earned yourself another subscriber... have a cookie.

@RedBeardOps 4 года назад

Lol, thank you sir! Appreciate that.

@mohammadsaedi5723 2 года назад

Thank you sir! I'm 14 but very very interested in knives camping fishing etc your video helped me a lot! I also love your knife designs. 👍🔪🔪

@RedBeardOps 2 года назад

Very cool! Take your time and be carful. Good luck with your builds

@gundanium3126 4 года назад

PPE: I wear a pair of Noise-canceling ear muff style headphones when i am in my shop (that i actually on amazon) and listen to audiobooks or music as I work

@RedBeardOps 4 года назад

Heck yeah. I love being able to listen to music and podcast while working!

@toma1460 4 года назад

PPE: Short story.... 20 years ago I was in at 1 of the big 3. Back before all this technology so I was fortunate to have that job. When it came to rules/ regulations of course we needed PPE, but no headphones. They provided the ear protection. I was 19 and wanted music but my job more. There was this guy 1 machine over who did wear phones and lost his arm shoulder and bit of his left ear. I learned real smart real quick about the policy protection for our ears not distraction from our jobs. Had to be aware enough to hear the machines when they go off, or back up, or any sound they should not be making. Ready to hit the BIG RED button when needed. Yes I did say when not if. So filing away with a file .... sure have some shop music from a radio. But please don't plug your ears with music to the point you can't hear your equipment. Thanks guys

@wvboy350 2 года назад

I just built a jig earlier today cant wait to make blades wish me luck!!!

@RedBeardOps 2 года назад

Good luck! 🙌

@Andy-in8ej 4 года назад

Be extra careful when drilling the tang, one slip and you will have to learn to play the flute.

@RedBeardOps Год назад

Have a great day!

@MichaelRagnarok 4 года назад

Great video! Right now where a lot of people have time on their hands and are at home, a good video for picking up knifemaking, AND it shows what can go wrong, good. Keep it up and stay safe!

@RedBeardOps 4 года назад

Yes sir! Thank you! I try to keep these videos honest, so I'll show my mistakes too. Like you said, I hope this motivates some people to get in the shop!

@MnPfan 4 года назад

I have used Gough's file guide to sharpen knives too using a Smith Tri-hone I had. I removed the stones from the plastic base and glued them to scrap wood so I had a surface to put the hose clamps on while using the full length of the stones.

@RedBeardOps 4 года назад

Very cool Mike!

@josheakins5137 4 года назад

“You could bring it all the way up to a mirror polish if you wanted to...and you’re a masochist” 🤣😂

@RedBeardOps 4 года назад

LOL, the truth! Not my jam for sure!

@ryanm5510 Год назад

Hey, I typically don't comment or leave reviews. But BRO. What an Excellent video. You showed us how to get into knife making on a budget. The different ways to do things. Sources on techniques other people have done. And you brought science into it to show us the quality and how strong the material or knife you made could hold up to some grueling punishment. Very well done man. Subscribed for sure.

@RedBeardOps Год назад

Thank you greatly Ryan! Glad you got something out of this one. Cheers!

@joshwebb4442 4 года назад

Most places charge more for a single knife to hear treat than to buy the torch

@RedBeardOps 4 года назад

This is true, good point.

@kgradio 10 месяцев назад

I hit the like button after only seeing the first 5 seconds; I saw that big American flag in the background and I knew you're an awesome dude and this video is going to be good.

@RedBeardOps 10 месяцев назад

heck yeah, cheers! Glad you enjoyed it!

@LegacyGuitars 4 года назад

The testing at the end felt like killing puppies. We all got invested in the knife, we gave it a name, then it died.

@RedBeardOps 4 года назад

LOL, sorry about that sir! It's a necessary step though. Breaking knives is part of the game! Glad you enjoyed this one.

@LegacyGuitars 4 года назад

@@RedBeardOps Great vid tho, I enjoy your content :) In all fairness that would have happened to the knife when you started using it anyway.

@zulfanhutasuhut9207 3 года назад

Thank you for sharing this awesome knowledge, and will try with my cheap tools

@RedBeardOps 3 года назад

Good luck! Cheers!

@Schnozwangler 4 года назад

Heed the warnings, tinnitus is a bitch (got some complementary of uncle sam). Great video mate very informative and easy to follow 👍🇺🇸

@RedBeardOps 4 года назад

Thank you sir! Glad you enjoyed it!

@ALWhiteAuthor 4 года назад

Hell... all of my knives are made with cheap Amazon and Harbor Freight tools. Started with just an HF 1x30 and a corded drill.

@RedBeardOps 4 года назад

Awesome man! That's how I started too!

@neilfurby555 3 года назад

Really well presented, and great filming. Quality stuff...thanks...

@RedBeardOps 3 года назад

Glad you enjoyed it! Thanks Neil!

@Shorty_Lickens 4 года назад

Next time, are you gonna make a knife with Harbor Freight tools?

@RedBeardOps 4 года назад

Maybe, that's not a bad idea sir!

@nelfredmagallon6659 4 года назад

one of the best videos so far that I have seen... very detailed and clear

@RedBeardOps 4 года назад

Thank you very much, sir!

@PearBearCam 4 года назад

So what you're telling me is...I'm going to use alot of sandpaper.

@RedBeardOps 4 года назад

Lol, yes sir! Lots of sand paper for sure.

@justinsmith9808 3 года назад

Your a god bro that jig is amazing and definitely something I will use in the future

@RedBeardOps 3 года назад

Glad you like it! Good luck Justin!

@BlessedDad1819 10 месяцев назад

Black and decker will get the job done but id recommend looking at the drills at harbor freight like bauer or hercules. They are cheap and tough as nails. I’ve personally used my hercules drill to drill through 5/8 inch steel many times and i still have it. It will be so hot its smoking and burning my hand and i just let it cool down and it keeps on going. Some of the tools at harbor freight are awesome.

@masoncragg1902 4 года назад

“Just a little bit of time” (takes 5 hours) just a bit of time a “little bit”

@RedBeardOps 4 года назад

Hey man, that's not much when it comes to making knives! LOL

@masoncragg1902 4 года назад

Red Beard Ops yeah it’s pretty cool I would like to make knives but I just feel like I would waste my money on the tools but how much would a knife like that be worth?

@timmura 3 года назад

@@masoncragg1902 it would probably cost around 100 dollars to make your first knife if you dont have tools.

@scottadams3625 4 года назад

Love that honemade Lasky system!

@RedBeardOps 4 года назад

Thanks Scott, glad you enjoyed this one.

@multidimensionaltraveler806 4 года назад

From the thumbnail i expected an Irish accent

@RedBeardOps 4 года назад

LOL, sorry for the disappointment!

@soupsock9743 4 года назад

For making handles I often like using a scroll saw. Just another pretty good option for it.

@RedBeardOps 4 года назад

Good option for sure!

@ajsironworks3937 4 года назад

Dude you are cool!!! Not an elitist but a guy who wants others to learn cool stuff that you enjoy. I respect that very much sir. I subbed to you a while back. Have a great day and thanks again.

@RedBeardOps 4 года назад

Hey man, I really appreciate that! Cheers man, thanks for your comment.

@zacharymoore642 3 года назад

Nice work and very helpful

@RedBeardOps 3 года назад

Thanks and welcome

@kensmapleleafretirement 4 года назад

Well done, I think this will be a winner. Great title too, should draw a crowd. Thanks for putting this out. I never made a knife even though, I have most of the tools needed, just not motivated to do so. This video help keep it simple and easy for a guy like me to follow.

@RedBeardOps 4 года назад

Hey Ken, thanks for that! It's a fun weekend project for sure. Defiantly can test your patience! Hope all is well. Cheers

@MrLexxmorelia 3 года назад

Great informative video, also good to se someone promoting entry level stuff as opposed to complicated builds with expensive forging/finishing equipment

@RedBeardOps 3 года назад

Glad you enjoyed it!

@djericanthony 4 года назад

I clamp a sharpened nail down to mark the center line of the edge. May work a little better. I love your improvised rotary sander for the finger well

@RedBeardOps 4 года назад

Cheers Eric

@CynicalDad81 4 года назад

The drill bit center mark 😲 Meta 👌🏻

@RedBeardOps 4 года назад

Thank you sir! Glad you liked it! Sorry for my delayed response.

@younanpolousy4345 10 месяцев назад

You are professional 😮😮😮😮😮 thanks

@chrismous29 3 года назад

love your way to share your knowlege to us, thumbs up!

@RedBeardOps 3 года назад

Thank you! Cheers! Have a great weekend

@gregholt Год назад

Hi James, You've inspired me to have a go at this. Thanks for your content, I'm now a subscriber. From Australia.

@RedBeardOps Год назад

Awesome! Thank you! Good luck with your build Greg!

@SonoraSlinger 2 года назад

Great video fellow strong beardsman. Here's a sandpaper hack- put duct tape on the back of the sandpaper to increase it's strength and lifespan (it's a beard for sandpaper) You can also put chalk on your file or sandpaper to reduce the gumming up effect that tends to happen.

@RedBeardOps 2 года назад

Thank you for the tips!

@racheltruitt8981 4 года назад

Woah! Right on Jimmy 😂😂 ! I'm glad you are still at it!!! I was on here catching up on soldering and you came up on my list!! -Rachel

@RedBeardOps 4 года назад

Hey, thanks! Good hobbies are good to have I guess. Keeps me busy. Hope all is well! 🙌

@chrisfurry766 3 года назад

Love your instructions. I have made a few knives but cant wait to employ some of your methods on my next build.

@RedBeardOps 3 года назад

Thank you sir! Glad you enjoyed it!

@MrTimmmers 2 года назад

Worth a look at Aldi or Lidl for a combo disc / belt sander, they often have them there pretty cheap, around 80 pounds, usually equates to dollars roughly. Nice video. Love that jig.

@RedBeardOps 2 года назад

Thanks for the tip!