Тёмный

Make a Medicine reminder alarm using DS3231 RTC Module and 16*2 LCD with Arduino Uno 

REES52
Подписаться 4 тыс.
Просмотров 51 тыс.
50% 1

🎤🎤🎤INTRODUCTION🎤🎤🎤
The application of Smart Medicine Reminder is very wide and can be used by patients at home, doctors at hospitals and at many other places to take medicine on time. We are making a simple Medicine Reminder Using Arduino which reminds us to take medicines 1 or 2 or 3 times a day. The time slot can be selected using push buttons. Also, it shows the current Date and Time.
📦📦📦KIT INCLUDED📦📦📦
+ Arduino Uno with USB cable -1
+ RTC DS3231 module -1
+ 16x2 LCD Display -1
+ Buzzer B-10 - 1
+ Led 5mm red - 1
+ 830 pt. Breadboard -1
+ Push Button - 4
+ 10K Potentiometer -1
+ Resistor 10K - 4,1K -1
+ Jumper Wires (Male to Male) - 20pcs
+ Jumper Wires(Male to Female)- 20pcs
+ Single stand wire 2mt -1
💽💽💽Software Required💽💽💽
Arduino IDE 1.8.10 (programmable platform for Arduino)
Click To Download: www.arduino.cc...
💰💰💰Purchase Link💰💰💰
rees52.com/lea...
📃📃📃USER MANUAL📃📃📃
rees52.com/lea...
🎁🎁🎁Discount🎁🎁🎁
Get 5% discount on your first purchase, Use "FLAT5"
📝📝📝CODES 📝📝📝
drive.google.c...
🔔🔔🔔SUBSCRIBE🔔🔔🔔
For more tutorials subscribe our channel REES52 on RU-vid
/ @rees5286

Опубликовано:

 

24 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 100   
@314srinija3
@314srinija3 2 года назад
The presentation is pretty well...but the connection of 10k resistors were wrong
@artorias7750
@artorias7750 Год назад
do you mean the resistors should be with the positive and the jumpers with the ground?
@sponx6521
@sponx6521 Год назад
I am not getting any text in the display
@yugendravenkatadurgamruthk7797
@yugendravenkatadurgamruthk7797 4 года назад
Its an awesome contribution and I loved the explanation. It would be great if you can explain us to control a Solenoid Valve at predefined times as this alarm system. :)
@rees5286
@rees5286 4 года назад
Sure !! We will make it soon.
@user-wh5fk1rl4k
@user-wh5fk1rl4k Год назад
Thank you so much 3>
@umadeviborra9217
@umadeviborra9217 2 года назад
Hey can I get the connects properly because the code is working but, the display is not shown
@theblitz6537
@theblitz6537 4 месяца назад
Mine also same what can i doo😢
@sumanthvarada-rq3lc
@sumanthvarada-rq3lc 3 месяца назад
adjust the potinetometer @@theblitz6537
@seajuanjo
@seajuanjo Год назад
Hi, great work, thanks , ¿Can You make same, but using a board esp8266 scrol ky040 and an LCD display 26x2 i2c? .
@robertheselwood4207
@robertheselwood4207 Год назад
I get an error when compiling the sketch : Compilation error: invalid digit "8" in octal constant, here: int buzz8amHH = 08; . I am using the arduino IDE 2.0.3
@theblitz6537
@theblitz6537 4 месяца назад
Same thing bro the display is not showing anything
@MansiDivekar-pu7qk
@MansiDivekar-pu7qk 3 месяца назад
hi lcd is not displaying any text plz give me such solution on this
@mamidivasudev5988
@mamidivasudev5988 2 года назад
You are awesome .. thanks for it.. is it possible to make alarm clock without rtc
@avi7380
@avi7380 Год назад
Help me if you have completed this plz I'm having trouble with led there is no output on my led
@fannsrw2037
@fannsrw2037 4 года назад
can you use esp32 microcontroller?
@hninnuhtwe4406
@hninnuhtwe4406 Год назад
Can you help me please Push button doesn't work Waiting for your reply
@wyvac
@wyvac Год назад
connect to 10k potentiometer
@theblitz6537
@theblitz6537 4 месяца назад
Mine also bro wt can i doo and display is not showing output😢
@east2000
@east2000 4 года назад
what about add notification on this device ? how it is going ?
@apichetsrisuk9095
@apichetsrisuk9095 3 года назад
Can i ask button 1 , 2, 3 , 4 is use for ?
@adilinthiyazshaik3860
@adilinthiyazshaik3860 3 года назад
Hello.... Iam doing the same project ..... Can you please help for me to complete this project....
@babulocal3162
@babulocal3162 3 года назад
Mggg
@manarmourad2736
@manarmourad2736 3 года назад
@@babulocal3162 CAN YOU HELP ME TOO
@devikakunapareddi6561
@devikakunapareddi6561 3 года назад
Do you have the code with u..... I'm too doing this project now
@devikakunapareddi6561
@devikakunapareddi6561 3 года назад
Will u plz send it
@adilinthiyazshaik3860
@adilinthiyazshaik3860 3 года назад
@Devika kunapareddi i have code
@NGXUANXUAN-tz8kd
@NGXUANXUAN-tz8kd 2 месяца назад
how to get the code?
@MAU0812
@MAU0812 3 года назад
How to connect via wifi ? Is there any method it could be very helpful and i qm planning to use weight sensor to chevk how many pills left and if the patient haven't taken the pill it will buzz the sound and make a notification to the guardian mobile for that any idea ?? How to get the notification using wifi or by bluetooth?
@pallavigokhale3595
@pallavigokhale3595 2 года назад
i am doing the same... did u get any solution?
@lymonwysonsoko7575
@lymonwysonsoko7575 2 года назад
@@pallavigokhale3595 even me 🙈🙈
@alyssab5780
@alyssab5780 3 года назад
can connect to smartphone or not?
@avi7380
@avi7380 Год назад
Hello mam I'm having issue I have uploaded code in Arduino Uno but it's not showing on led display plz help reply mam I have to give this project tomorrow
@prabhdeepsingh4879
@prabhdeepsingh4879 Год назад
same with me bro:(, Did you get any Solution for that??
@danikkpatel9775
@danikkpatel9775 7 месяцев назад
hello bro did u get the solution for this problem @@prabhdeepsingh4879
@danikkpatel9775
@danikkpatel9775 7 месяцев назад
hello did u get the solution for this problem
@theblitz6537
@theblitz6537 4 месяца назад
Same bro pls help me😢
@visiontravel9900
@visiontravel9900 4 месяца назад
Any solutions plz reply????
@FNurulFathiha
@FNurulFathiha 9 месяцев назад
can i change arduino uno to esp8266 ?
@ashifurrahman4194
@ashifurrahman4194 3 года назад
Display dose not show any massage , how can i solve it
@avi7380
@avi7380 Год назад
Same I'm having same issue help me brother if you know how to solve it plz reply
@danikkpatel9775
@danikkpatel9775 7 месяцев назад
Even I'm facing the same issue what's the reason
@muhammadadamamli6501
@muhammadadamamli6501 3 года назад
Can u make this project with iot ? 🙌
@MAU0812
@MAU0812 3 года назад
Where to get the code
@SanthoshKumar-dn9vn
@SanthoshKumar-dn9vn Год назад
Could u plz paste the code here in comment session plz
@nityasrivastava918
@nityasrivastava918 8 месяцев назад
Where I can get the code for this connection
@vishnukk6857
@vishnukk6857 4 года назад
Will you please send me the program
@rees5286
@rees5286 4 года назад
drive.google.com/file/d/1_QqmBwnIfnGi_Y51ROzGj6YwKhD68LKT/view
@lymonwysonsoko7575
@lymonwysonsoko7575 2 года назад
@@rees5286 can you resend it again
@farahhana8971
@farahhana8971 3 года назад
If I want to add temperature sensor how can I add
@abiramis9552
@abiramis9552 Год назад
Can we use nano
@surnamukesh3291
@surnamukesh3291 Год назад
How to get this instruments and cost of this project please
@user-mm2lt9uq7r
@user-mm2lt9uq7r 2 года назад
Can you send the code, it won't open for me please?
@lelalela6547
@lelalela6547 Год назад
Can you send the code that in the description does not open it says it is an unsupported file
@abdurRahman-od3fd
@abdurRahman-od3fd 7 месяцев назад
just download it
@nikhilvaybhat9858
@nikhilvaybhat9858 2 года назад
Jumper wire 13 che use kele ahet bake che kay kare che ane te chota pins kaselya ahet
@nikhilvaybhat9858
@nikhilvaybhat9858 2 года назад
Please help me this project
@dignagpakhare2138
@dignagpakhare2138 Год назад
Can you provide circuit diagram
@saisunilkanneti5814
@saisunilkanneti5814 2 года назад
Hello
@nivipavi3423
@nivipavi3423 11 месяцев назад
Will u sell this project?
@brandonkalathil9694
@brandonkalathil9694 Год назад
Does someone have the Github master zip file?
@rahulfantastic889
@rahulfantastic889 Год назад
Bro can you tell me if the lcd screen is soldered to the bread board or not?
@darishettysahaja7908
@darishettysahaja7908 2 года назад
Could you plz send the code
@al23wi
@al23wi Год назад
Kur yra kodas?!
@muskanbagban537
@muskanbagban537 2 года назад
How to connect LED??
@avi7380
@avi7380 Год назад
Same there is no output on led plz help me if you know solution
@helloworld-on3oq
@helloworld-on3oq 2 года назад
@AdiL Inthiyaz Shaik can u please send me the code i am not getting anything on the display
@lauretomanueljefferson1300
@lauretomanueljefferson1300 2 года назад
What should i do if the lcd does not display any text?
@ramesharakeri4908
@ramesharakeri4908 2 года назад
Same problem
@avi7380
@avi7380 Год назад
Same brother if you know solution then help me too plz
@avi7380
@avi7380 Год назад
@@ramesharakeri4908 help me if you know solution
@ramesharakeri4908
@ramesharakeri4908 Год назад
@@avi7380 connect the potentiometer and reduce the intensity of display because whenever we bought a lcd it will be having a high intensity by default
@sponx6521
@sponx6521 Год назад
@@ramesharakeri4908 when i reduce the intensity of the potentiometer the lcd just turn completely blue and if i move it up it displays white squares but not any text
@swasthinayak3140
@swasthinayak3140 Год назад
I am really in need of this code Plzzzzzz help me🙏🙏🙏
@avi7380
@avi7380 Год назад
Code is in description my friend
@avi7380
@avi7380 Год назад
Is your led working?
@avinandanchandravanshi2425
@avinandanchandravanshi2425 3 года назад
Which model of potentometer is used in this project
@anshikharoy9913
@anshikharoy9913 Год назад
Total price ketn lagyeg banne me
@avi7380
@avi7380 Год назад
Around 1500 lagenge
@pochinkipothuaraju6589
@pochinkipothuaraju6589 Год назад
how to purchase this device can you send email
@rees5286
@rees5286 Год назад
you can purchase this from www.rees52.com
Далее
How to use DS3231 RTC module to build OLED clock
15:34
Medicine Reminder System With Arduino
10:35
Просмотров 13 тыс.
Automatic Medicine Reminder System Using Arduino
7:46
Просмотров 4,7 тыс.
Simple & Easy Arduino Alarm Clock with DS1302
7:17
Просмотров 45 тыс.
How To Make DIY Arduino Gesture Control Robot At Home
8:53