MAKE A STUDIO DELAY WITH SCIENCE AND A HOSE.

Подписаться 636 тыс.

Просмотров 106 тыс.

50% 1

After the fun @Hainbach and I had recording "Rotopops", We decided to do a follow up! Here is a Vinyl release of them both :-
hainbach.bandcamp.com/.../rot...
-----
Full length videos from this project and the rotopops project and loads more! it also helps fund projects like going to hainbachs to make these videos :-
/ process-of-100411443
-----
@Hainbach video on another song on the EP! :-
• Making beats on a pian...
-------
PIPE DREAMS EP :- hainbach.bandcamp.com/album/p...
---------
The original ROTOPOPS Project :-
• THE STRANGEST SPEAKER ...
--------
found the mic here! :-
amzn.to/3vl0JV7
---------
THANKUS HUMUNGOUSO to :-
Johnny Prime
Annina H. Rokka
hans bricks
Bob
Simeon Peebler
3D6.Space
michaelian
Markku Rontu
Jason Kostempski
TheTechromancer
Space Pope
Cameron Luteraan
Ande Spenser
Arnix T-Bone
Aaron Ritter
David Boudreau
Butterbrot
Polykit
Matthew W
Blakwater
David Dolphin
Matt Followell (PDP-7)
Miles Flavel
Systems and Smiles
-------------
Paypal :- www.paypal.me/lookmumnocomputer
Facebook :- / lookmumnocomputer
Website :- www.lookmumnocomputer.com
Instagram :- / lookmumnocomputer
#synthesizer #microphone #experiment

Видеоклипы

Опубликовано:

5 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 426

@LOOKMUMNOCOMPUTER Месяц назад

You can now get both of the EP's on vinyl!!! there is a bandcamp vinyl campaign link above!!! PEACE

@AquarianSoulTimeTraveler Месяц назад

Would be very interesting to cast the whole thing in concrete with the hoses and all to make it more solid and see how different it sounds

@AquarianSoulTimeTraveler Месяц назад

Imagine you get more volume from a concrete cast because it can't vibrate as much forcing the sound to go down the pipe instead

@Nervejam Месяц назад

Unfortunately, postage to the UK appears to be more expensive than the record?

@LOOKMUMNOCOMPUTER Месяц назад

@@Nervejam yeah its mad int it :(

@thorloki5449 Месяц назад

Sam when you gonna make a rotory subwoofer?

@TheGaryHughes Месяц назад

Sir there's people blowing in the hoses... again

@kassemir Месяц назад

I seriously don't think that is a regular thing :) Though, with the funnel too, they definitely thought they were gonna be cooking up some drugs or something :D

@danpatterson8009 Месяц назад

I do that all the time.

@themadsamplist Месяц назад

@@kassemir You have no idea how often stuff like this happens. Also with wastewater pipes

@anagram-3kp0 Месяц назад

Hey, help me here! What is your best hose for delay-based applications?

@baltimoreluke Месяц назад

eh, it was only the 4th weirdest thing the store employees saw that day

@elijahmadden4057 Месяц назад

You and Hainbach make a great Adam Savage / Jamie Hyneman-type duo

@B-Nice Месяц назад

Synth-Busters!!!!!

@entropybentwhistle Месяц назад

@@B-NiceBut who are the Grant, Kari and Tory of the synth world?

@Kington99 Месяц назад

except these guys seem to actually like each other

@Alkatross Месяц назад

They do have good chemistry

@MrOtistetrax 28 дней назад

Neither of them are as annoying as Adam.

@jzero4813 Месяц назад

6:38 : 89ms is just around exactly what you would expect -> 30m hose divided by (speed of sound) 343m/sec = 0.0874sec, or 87.4ms. This will change depending on temperature but the hose is probably a bit longer than 30m (so they don't go to prison for false advertising) and that's likely where the other 1.6ms came from. 89ms is 1/16th notes at 168bpm.

@phluid61 Месяц назад

And to take it a step further, if you want 30 ms specifically, 343 m/s × 0.03 s = 10.29 m

@TeTe76VTheChiken 24 дня назад

We can estimate the temperature of the studio in kelvin with (30/(0.089*20))^2, we do -273,15 to the result ans we get about 11 °C

@TeTe76VTheChiken 24 дня назад

It's not precise because if we take 88 ms instead of 89, we obtained 17 °C

@jzero4813 24 дня назад

@@TeTe76VTheChiken Yes, and there is uncertainty on the length. Hardware store labels are not exactly NIST quality measures.

@dav1dbone Месяц назад

Can you call the manager there's two weird guys lurking about up the plumbing aisle, they're making strange noises and blowing in the hosepipes! "Excuse me lads, can I help you?" "We're fine, we are going to be recording a song called Pipe Dreams."

@Felttipfuzzywuzzyflyguy 26 дней назад

😂

@jochenstacker7448 Месяц назад

When Hainbach and Sam are going to Obi, you know it's gonna be good. I wish there was a regular segment where those two could go to a hardware store and build mad instruments from random stuff they buy there.

@drworm5007 Месяц назад

Cool idea for a reality show.

@AlphaNovaOfficial Месяц назад

That was almost the concept for the show that he made a couple years(?) back! Really entertaining, maybe this could be the V2.

@kramer26 Месяц назад

Wasn't that Sam's original "regular segment" from the early days of LMNC??

@Hainbach Месяц назад

Good to have you back!

@KeritechElectronics Месяц назад

Damn right! Always a joy to watch you two work together.

@TanzmitTransmit Месяц назад

I thought today would be the day I hear the words “Hainbach goes to Hornbach” (album name??) but I fear I may still have to wait a bit longer 😊

@KeritechElectronics Месяц назад

@@TanzmitTransmit just don't get too horny about that, haha!

@MrTomb789 Месяц назад

This was an absolute joy to watch...

@dengyun846 Месяц назад

Watch out, he's going to steal your spare room and declare WG, and never return to Britain.

@Murgoh Месяц назад

Back in the 70's when I was a child my grandfather had a huge coil (maybe some 100 meters) of 1" polyethene water pipe at the summer place. I would always be shouting and speking into the pipe and listening to the echo coming through the other end.

@axel_is_gaming Месяц назад

You need to get a hose that is made of plastic, one of those pexal hoses, that also has aluminium insertion. This hose is rubbery, it will dampen the sound. 100% procent will sound a lot beter with a pexal hose.

@Hainbach Месяц назад

Cool tip!

@TDOBrandano Месяц назад

the black PVC pipes for drip irrigation might work well for this, and should be fairly cheap. the box will have to be bigger though.

@confuseatronica Месяц назад

theres so many different hoses, you could just have a collection of different ones to swap in

@kschleic9053 Месяц назад

@@TDOBrandano Heat it up and you could pull it into a tighter coil than it ships in...

@pauljs75 Месяц назад

I'd bet wall thickness affects the sound too. So it could be more "echo-y" with something thin-walled and made of a relatively stiff material.

@ChristianBehnke Месяц назад

Two guys tooting into hoses in the hardware store is one of the best things I've seen on the internet this year. 😂

@cyberyogicowindler2448 26 дней назад

Together with mouthpiece and a traffic cone it makes an Alpschlauch (portable wannabe alphorn).

Месяц назад

IIRC, the og. Time Cube had 2 hoses of 14ft. and 16ft. respectively, which gave it 14 and 16 ms of delay. For practical purposes, you can calculate delay times with 1ft.=1ms or 1meter=3 ms.

@kensmith5694 Месяц назад

If I was designing a thing like it, I would use 13ft and 16ft. The lengths share no divisors. And the difference shares no divisor. This way when you loop it back for feedback to make a sustained echo, you get the signal repeated at times of: 13ms 16ms 13ms + 13ms 13ms + 16ms 16ms + 16ms 13ms + 13ms + 13mS .... etc ... The list goes on with no two sums equal until you get out to 2.08 seconds.

@GizzyDillespee Месяц назад

Ideally you'd want to tune it to the root or key of the track. As far as L-R detune, I'd cut 1 side slightly longer than the ideal length, and the other slightly shorter. IDK the ideal offset, so that it separates, but doesn't quite chorus. I guess trial and error is difficult when you have to cut more material, from one side or the other, for each new trial. You could figure it out the best sounding detune amount digitally, and then do the math to find the correct difference in hose length, for that detune amount.

@MrJonBertsch Месяц назад

I work in a plumbing warehouse and I’m surrounded by coils of pipe in tons of sizes and materials. Wonder what a 100 foot coil of 2” copper would sound like? Or maybe a 500 feet roll of gas pipe?? Gonna have to try this out on a few 😊

@alexandremargat2350 Месяц назад

"Next week, we'll learn how to make a looper with a coffee grinder. Stay tuned!"

@HyraxAttax Месяц назад

DIY talk boxes use speaker horn drivers for the speaker, which are designed to pump sound out of a small hole that you can just shove a tube into.

@nigelworwood8530 Месяц назад

Back in the early 60s I had an earthing spring from a TV CRT. At one end was a loud speaker attached by 3 x threads through the cone at the other end was a record player cartridge. This used a stylus that was held in by a screw. The stylus was replaced by a sewing needle and again thread was used to attach it to the spring. This gave a beautiful sound to the input. Although my mother didn't agree! Also you could tap the spring and produce noises that would considered to be in the Star Wars canon.

@cyberyogicowindler2448 26 дней назад

Sproing reverbs... Also don't forget the non-electronic Echo Mike soundtoy.

@theonlywoody2shoes Месяц назад

Speed of sound in air 330 metres per second. 30m of hose pipe = 30/330 = 0.909 seconds, or 90.9mS, so you measurement in the video at 6:36 of 89mS is pretty spot on. I love old school solutions that are sadly just digitised these days. I’ve been aware of spring reverb and delay units, but pipe delays were not something I’d come across before, so thanks for sharing.

@kaitlyn__L 24 дня назад

I saw another cool video about a pipe delay that used larger-diameter rigid PVC pipes, and could disconnect sections to reduce the delay time. It sounded pretty good!

@fissionchips8840 Месяц назад

It's worthy of a like just watching you two walk around a B&Q playing a hosepipe. I wish we could have caught a customer or workers reaction. Oh it's those two nevermind 😁

@actodesco 16 дней назад

In the 60s, reverb was something everyone seemed to want, even in our cars. They made reverb units especially for car. These used the spring units that were originally designed for Hammond organs, only smaller. When you went over a bump in the road, ....twang, twang, twang. Anyway, Popular Science or Mechanics, I think Mechanics, did a thing where they used a garden hose, a funnel, speaker and microphone, similar to the one you built in the video. I always wanted to build on myself, however, I never seemed to have the time or money at that time.

@michaelcherry8952 Месяц назад

As a Canadian, all I can say is: "What a pair of hosers, eh?"😂 When I was a kid, we used to fool around with garden hoses like this all the time, talking to each other . You had to be careful that your friend didn't get cute and attach his end to the outside water tap!

@entropybentwhistle Месяц назад

Came here looking for who made the Bob & Doug reference first. We’ll have to send them emergency toques and donuts since there was a serious lack of such in the vid.

@keeperofthegood Месяц назад

Air/Water Tube delays are watery cool :) Like trying to sing in an indoor pool room. Ive often wondered about flat springs as delay (laser cut sheet metal to a spiral, place a driver element at the center, and pick up points along the spiral arc) or using the spongy action of a column of magnets in a tube, South to South then North to North, as there is a period of absorption time before each repelling magnet moves next, drive one end and pick up on the other :)

@marksieczko7766 Месяц назад

What a great idea. Could even be expanded on by using electromagnets to damp/excite the spring rhythmically.

@marksieczko7766 Месяц назад

With the dry/wet ratio set right it's blimmin' great.Quite inspiring really.

@qpouvtmvoelxjtu458 Месяц назад

Watching two buffoons trying out the accoustics of garden hoses in a store makes me feel so much less lonely in the world it actually brings tears to my eyes.

@PaulSpades Месяц назад

Aye!

@industrialmonk Месяц назад

Love it reminds me of old CRT TVs that had a time delay component that was just a length of wire proper old school.

@McSlobo Месяц назад

Well, weirdly enough, in modern computing devices circuit board's wire lengths have tight tolerances, and occasionally some extra curves are made to have them in sync. Especially visible in devices like high frequency oscilloscopes.

@cyberyogicowindler2448 26 дней назад

@@McSlobo The traces for RGB components in high quality graphics cards often had additional curves to make them exactly same length to avoid delay.

@EarthWalkerOne Месяц назад

Awesome. I had a lot of fun playing with stuff like this a while back. My favorite was a using the speaker and mic from an 60s telephone with bamboo and a really thin-walled plastic tube.

@Richardincancale Месяц назад

Perfect timing - I was just thinking about making an analogue reverb last night! You could put some diverter valves in the tube to vary the delay!

@Stereomoo Месяц назад

Maybe you could adapt a slide whistle to tune its resonant frequencies, really dial it in to the key you're playing (or just wiggle it to get weird delay effects)

@hoboroadie4623 Месяц назад

Much more scientific than when I tried this out. Just like a hoboroadie, I first got Butyl Rubber hose, which is the most expensive, and also the most effective at attenuation of the SPL. Twenty feet to deadness. Hard pipe is where it is at. When my Uncle rebuilt his house in Berkeley, he installed speaking tubes from the kitchen to the library and to the kid's playroom. Like the tubes from the Bridge to the Engine Room. (Full speed ahead!) One of my favorite mics is the SM-11, which is essentially a free-ranging Cartridge from a SM-57 or 58 mic, Omnidirectional so it doesn't do the proximity thing and you can drop it into spots for a sample of the sound.

@Alacritous Месяц назад

I've been wanting to make a Talk Box and you putting that speaker on a funnel is the last piece of the puzzle. Cheers.

@DjDoggDad Месяц назад

Putting a hose on a speaker is the only piece of that puzzle 🤣 you can also just put a funnel and hose on any old practice amp for your own talk box

@ironchimpo 28 дней назад

Try a PA horn. Works great and pushes a bit of air

@hobbified Месяц назад

Just a couple weeks ago I was at the Norwegian Museum of Science and Technology (Norsk Teknisk Museum) and they had this as an exhibit, only without the electronics. Just a big length of pipe coiled up on the wall, with a couple funnels arranged so that you could put your ear next to one while you yelled into the other. It was about a quarter second of delay, so maybe 100m of pipe.

@ervinpoljak8332 27 дней назад

The guys at OBi were like wtf dudes, when they saw you blowing these pipes :)))) ❤

@donm1547 18 дней назад

Ok, guys great video. Reminds me of 40 years ago and a Studio that a friend was building had an array of 3" in pipes up in the ceiling all of different lengths, probably 5 different lengths, ranging from 10 ft to 30 ft and each one equated to a different delay value, the delay calculation is approximately 1 millisecond per foot of pipe, you can use one speaker to Source all the pipes at once and One mic in each one of the ends of the tubes to record five different tracks of different delay values, and select the delay that works the best, also, when you use a larger pipe like a 3-inch irrigation pipe you don't have as much of the muffling as you experienced with the hose tube , try it and I think you'll be amazed!

@leopiipponen7693 Месяц назад

The hose delay could also make multiple analog signals of the hose mixer into one , Y-Type Tee :)

@PaulSpades Месяц назад

A mechanical mixer. Needs some valves for each channel, but I like it!

@kensmith5694 Месяц назад

Interesting! A huge number of years ago I helped someone with the design of a quite different delay but a few of these things may still apply 1) If you equalize on the way into the speaker you can get the frequency response back closer to flat. 2) Reversing the polarity of the drive to the speaker (input transducer) in one case helped to defeat oscillation 3) This one is a bit complex. If you bring the output transducer back to your mixer to do feedback you can get a long echo. If however, you combine with the singer and then compress before feeding it into the speaker, each new sound from the singer tends to replace the sound that is echoing about. A bit of a volume expand on the output of the total system before you go to recording makes the fading echo drop away faster after a bit of time.

@bylescx Месяц назад

that green flexible conduit was corrugated? i wonder how the turbulance might affect your delay. much wider diamater and less rubbery too, maybe less vibration would be absorbed too? .. dunno 😊

@geraldfriend256 Месяц назад

I only know this much from homemade wind instruments.: corrugated hose gives more growl.

@feltusfeicit Месяц назад

Seriously, I've had a length of 10mm copper pipe wrapped around a big cardboard tube for over a decade, specifically for this purpose (and without knowing about the legacy equipment). My plan was to have the coil, which is about 80cm long, with several t-junction 'taps' with mics down the length for different amounts of delay. I think I bought the pipe from the scratch and dent shelf at a plumbing supply shop in Edinburgh after seeing a doc on the basement reverb that Abbey Road used to have.

@Jonathan_Doe_ Месяц назад

You can buy 25M coils of 15mm copper pipe… Not cheap, but it’d probably have more high end to it than the rubbery plastic.

@JH-lo9ut Месяц назад

Yeah, the rubber (soft plastic probably absorbs a bit of sound. In the picture of that original pipe delay it looks like they might have used pressurized air-hose, wich makes sence, since it is pretty rigid and doesn't expand.

@PhilR0gers Месяц назад

Never seen coils of 15mm, but you can get coils of 10mm and 8mm.

@Wagoo Месяц назад

yeah I've wondered about these too.. but in the case of tight coils of copper.. perhaps you need to insulate each loop of the coil from the next.. to avoid metal->metal transmission of the signal "jumping ahead" through the system. May or may not be a bad thing, soundwise, though

@ErickvdK Месяц назад

PE hose for drinkingwater or floorheating is probably cheaper.😊

@guitfidle Месяц назад

You can also do this with headphone elements, both as speaker and microphone. My daughter gets these cheap on ear headphones, the cord wears out really quick, so I save the elements for experiments like this. You can even get broken ones from a flea market or second hand store- usually the cable is the issue, and the elements work fine (usually).

@guitfidle Месяц назад

Man, I gotta try this right away.... pretty sure I have a scrap hose to use, I have several of the headphone elements, plenty of cabling.... got a Field Kit, has 4 inputs, could do 4 different lengths....

@musiqtee Месяц назад

I did sessions in Stockholm’s long defunct Decibel Studio in 1986. They had two pipe-delays in full operation - I used them for mainstream synth pop… What would I know, I was 20 ½. _“What do you mean ‘retro’ 38 years into the future…?”_ 😂

@brittmurray9818 12 дней назад

Cool idea. I still remember from one summer I did some construction work that a piece of metal duct work does an amazing reverb. Fun stuff. :)

@Elluvis72 14 дней назад

I love the chemistry between you guys!

@theokidokis Месяц назад

You can use the speakered tube as a talkbox also!

@thomasrosebrough9062 Месяц назад

Wow what an awesome effect from such a mechanically simple idea!!

@robomatrix4582 25 дней назад

this is actually some of the most entertaining content online, next to what rob scallion and andy huang do. their all wildly talented.

@Wagoo Месяц назад

I love this kind of shit. I've often wondered if you could put multiple mics at tap points down the length of the tube, or if that'd ruin the signal. It sounds pretty filtered anyway, though.. so just need to give it a go really

@bubbasplants189 Месяц назад

That sounds so awesome! Thanks for the video!

@olivier2553 Месяц назад

Analog TV camera used length of coaxial cable to create some accurate delay (like line sync, etc.) to create the appropriate TV signal.

@PaulSpades Месяц назад

Hah. Very cool.

@kramer26 Месяц назад

I would have loved to have been a musician back in the early days of electronics and tape recording... imagine the fun to be had with seemingly unrelated, everyday items... and that case for the hose reel is just perfect! Imagine carrying it to a gig or something and someone at the bus stop notices the 2 innocuous connectors in the side, would be a great conversation starter!

@lemn8 Месяц назад

I was wondering if you could 3D print a cube with a complex tunneling system inside. The material like PLA is much harder so it wouldnt muffle the "highs" as much like the rubber hose.

@snoballuk Месяц назад

You might want to look into the Xophonic, made by Radio Craftsmen Inc. in the 1950s. A similar idea, but using metal pipe and marketed at home hi-fi enthusiasts of the time.

@PhilR0gers Месяц назад

I can't believe how good this sounds.

@SpruceHouse Месяц назад

really liked the vlog style part at the beginning, Good to have you back!

@GistOfItMedia Месяц назад

unbelievably righteous commitment to the craft

@audhen1 Месяц назад

Always happy seeing you both :D

@Divinebelf Месяц назад

Love your video's and I have nothing but respect for you and the way you make good music. Keep it up please!

@frankl5963 Месяц назад

I wonder if some insulation between each loop of the hose would keep vibrations from traveling through the walls instead of just through the air in the hose.

@jzero4813 Месяц назад

Wonder not - it would. Significantly. In rubber the speed of sound is about 60m/sec, so across a 0.2m wide bundle that's approximately a 3.3ms delay. Around the whole 30m it's a half second delay, but the damping would be so strong almost no power would be left in the wall vibration at the other end. It's a really good idea.

@Flako-dd Месяц назад

Hainbach and Sam you two remind me of Pinky and the Brain, but you are both Pinky and the Brain at the same time. 😅 What are we going to build today Sam? The same thing we do every night, Hainbach: Build a crazy music contraption!

@gorak9000 Месяц назад

You forgot the "the same thing we do every night, pinky..." bit

@ViktorNova 23 дня назад

Seeing you two playing together like adult kids in an audio candy workshop makes me so happy 🖤

@gorignac7487 Месяц назад

Some ski resorts in the USA use a hose between the top and bottom of the lifts for communication. The harder the material of the hose, the better it keeps the sound without dampening it.

@cyberyogicowindler2448 26 дней назад

These things were also used for communication from bridge to the engine room in steam ships.

@seedmole Месяц назад

Nice, I spent all morning making a test environment to check my roundtrip latency for what would ultimately be a multitrack recording system in puredata. It's all delays.

@KeritechElectronics Месяц назад

Always loving the Hainbach/LMNC collabs! A synthesis of Law and Chaos, you guys are hella creative. This reminds me of the magnetostrictive torsional delay line memory used in Soviet Iskra 111 calculators. As the name suggests, that also conveys mechanical pulses through a long physical object.

@batchrocketproject4720 Месяц назад

"basically, a long corridor in a box" I love this, real ingenuity creating a great effect. I also enjoyed your clever testing method in the hardware store (I'd have been the idiot who bought three different lengths to try out at home). Best of luck with your vinyl release! (By the way, ignoring other effects, each 10 metres should produce ~30ms delay, based solely on the speed of sound in air. The hose wall itself might also propagate significant sound and that would travel much faster, maybe a 3ms delay per 10 metres, depending on material - check the isolated recording for its own echo).

@TheDistur Месяц назад

That is so cool. The things people think of!

@tomholroyd7519 Месяц назад

I put my PhD advisor in headphones connected through a digital delay to the mic in his hand. Set to ~1 second delay. He said, "It doesn't seem seem to be doing anything." I said, "You said 'seem' twice." Delayed Audio Feedback really messes with your speech brains at long delays. OTOH at 30~40 ms you are getting into beta/gamma Hz range which is a very important frequency in the brain; those sorts of frequencies cause ENTRAINMENT of neurons, which does strange things. Neurons are little non-linear oscillators (not computers) and they will easily couple at 40 Hz. You can even see BEAT frequencies in the BRAIN data if you add two close sinusoids together for the auditory stimulus. (IDK when the last time you listened to a pure sine wave was, lol ...)

@BobBrandon 13 дней назад

Back in the 60s and 70s, there were some radio stations that used similar hoses in the audio chain to add echo to their announcer's voices.

@PierGen 29 дней назад

Super good content! thank you for sharing.

@ferrifet7267 Месяц назад

Thats really quite effective, might have to build one! ❤

@billybob915 Месяц назад

During the quadraphonic boom in the 70s there was an article, maybe popular electronics, had a DIY that used a 3" speaker stuck into a funnel, 25ft of garden hose and a mic at the other end. Times two, sending each to the opposite rear channel. Poor man's ambient, or synthethized quadraphonic.

@PhilLesh69 9 дней назад

I took a sound reinforcement and studio engineering course at the Loudon campus of Northern Virginia community college about thirty years ago. They had a gigantic plat reverb in the classroom. Everyone thought it was a giant rolling chalkboard because it was mixed in with that sort of stuff along a back wall. It was a big rectangular frame with a wooden enclosure and a four foot by eight foot quarter inch steel plate suspended from the top on springs and stabilized by sound isolating rubber mounts along the other sides, and it had a transducer attached to the top left corner and a pickup on the bottom right. I also went to see John Scofield about twenty years ago. He has a moog synthesizer or maybe it's called something else. It was a keyboard/organ powered by a giant spinning wheel that pumped air through the pipes. It had a separate box for the "air powered amplifier".

@PhilLesh69 9 дней назад

Plat = plate.

@Jamslerr 17 дней назад

Glad i'm not the only one who checks to see if the glue is still hot right after it's put on.

@sgctactics Месяц назад

Copper tubing comes in coils, I bet it could provide more of a high/band pass effect. Mix that with the hose one and I bet you could get all sorts of sonic range. Voltage controlled tubing delay/filter? I think VCTDF should be a common acronym

@hoboroadie4623 Месяц назад

sgctactics, exactly!

@m0les Месяц назад

Is there a Nobel prize for "two dorks in a hardware store misusing the garden hoses"? You guys just won it. I hope this is all that remains of human culture when extra-terrestrial archaeologists discover our ruins millions of years in the future.

@cyberyogicowindler2448 26 дней назад

I thought the Alpschlauch was the strangest such contraption (portable alphorn surrogate with traffic cone end).

@carstenvalentina Месяц назад

I made one of those long time ago. They were used as Pre Delay in movies. Like when a person walking through a tunnel, and then added reverb ...

@ssmedia Месяц назад

Probably a good thing you left it with Hainbach.. Imagine trying to explain that to airport security 😂

@Oglokoog 27 дней назад

definitely a bomb

@CensoredByYouTube. Месяц назад

The speed of sound is around 342.6m/sec, or roughly 2.92ms per meter. If the original unit had a delay time of 30ms, you would have wanted a ~10m hose, not 30. Also, a more rigid-walled plastic tubing (PEX, maybe?) would prevent dampening the sound to the degree that a softer garden hose would. Some have suggested copper, but that has its own resonance if you're trying to keep the delayed sound as clean as possible.

@antivanti Месяц назад

Delay lines were used as digital memory in the early days of computers. They used a metal wire instead of a hose but otherwise the same thing. You had to read the entire memory and retransmit it constantly

@cyberyogicowindler2448 26 дней назад

The Friden EC-130 calculator use a coil gong and all-transistor circuit for a serial 1-bit digital computer with CRT that fits onto a desk. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-N9cUbYII5RY.html

@slooberslodge Месяц назад

I've got a Urei time cube, it works best feeding one pipe into the other and then feeding back the whole thing using a mixer. The feedback has quite a different quality than any other delay, its not amazing but pretty cool, I like it a lot. BUT i read an interview with the original designer and he said Urei messed up his design as they used garden hose but he originally used Copper pipe ! One would think yes Copper or some other metalic pipe should sound better as hose pipe is pretty dead and boring, I never got around to trying it though...i was hoping u2 were going to do it!

@meistudiony Месяц назад

Cooper time cube was an ingenious and awesome bit of kit! If im not mistaken the had 2 hoses so you could get 2 different delay times. This is awesome! Love seeing creative solutions like this. Almost sounds like a reverb with the feedback. LOL i sent my comment before the video was over, and yeah you guys mentioned that. So cool! Congrats!

@cyberyogicowindler2448 26 дней назад

Add an Y junction between 2 hoses for mixing the outputs. I guess that plenty of brass instrument principles may be repurposed for this.

@DetroitMicroSound Месяц назад

Love real-world echos, and reverbs. Now I want to try a "Y" shaped hose, with one side of the "Y" reaching just a little further than the other, with two mics. A quickly doubled echo returning....

@sharptrickster Месяц назад

I wonder what a "physical scanner vibrato" would sound like. Imagine instead of having a rotary contraption tapping signals from different points on the resistor-inductor ladder for different phases, you had the hose drilled with electrets every ~1 or 2 meters for example, and a sequencer switching their output for modulating the delay times? In my mind, the hose would look like a "flute" drilled at the diameter of the electret, which would be placed and covered in epoxy so the sound would continue travelling until the end. Not covering the end and letting the sound go through the other end should give a more "open" sound too, maybe? (open ended) I love your videos, they are really inspiring. Keep doing your experiments and sharing with us please. Thanks o/

@FredBloggs919 Месяц назад

What about running sound through pipes, say like an old house’s plumbing or some industrial machine full of pipes or coils…

@gorak9000 Месяц назад

pretty sure the blue man group owns the patent on that - they'll sue you

@NathanSeeley Месяц назад

If you put the ends of the hose out the sides of the box, you can fill it with expanding foam to isolate it better

@matthewday7565 Месяц назад

Maybe you could apply an ascending EQ to the drive, to balance the muffling

@hoboroadie4623 Месяц назад

Harder pipe. Brass was used in old ships and submarines. Or embrace the tone- I just scored a Western Electric Carbon Cartridge mic to capture my Talkbox tone. (Two hoses fed from a Stereo Leslie Emulator is the latest trick)

@gorak9000 Месяц назад

Need to calibrate by running white noise through it and looking at the resulting spectrum. Then pre-compensate with an EQ that's opposite the spectral response from the hose. Might need to notch out the resonant frequency as well - you can hear some feedback forming towards the very end of the video.

@alishatruman Месяц назад

I found a video on here with an engineer digging a well. It's about a foot wide and a few hundred feet deep. Reminds me of the time cube. It made the most uniquely pleasant sounding delay and it's my dream to have one for the home studio!

@TVPiles 16 дней назад

The first time I saw something like that was in Popular Electronics some time in the 60s, now they tried to make a pseudo Quadro sound and had 2 boxes with tubes.

@martattacks Месяц назад

Very classy. I am quite surprised about how "expensive" it sounds.

@JanicekTrnecka Месяц назад

Call the psych ward, there are some guys in the garden accessories aisle needing help. Also get someone to announce on PA, that garden centre is being closed down due to maintenance...

@Felttipfuzzywuzzyflyguy 26 дней назад

These guys are magicians.

@kingpishful Месяц назад

I've heard of Sylvia Massey doing this on drum kits with a hose. You guys would probably like her book. There is stuff on RU-vid with her and the Melvins where she uses an old bulb(also a pickle) to make distortion too. RU-vid Melvins Pickle Solo

@Bridge_Studios Месяц назад

So good to know others have also seen Sylvia Massey and read her book Recording Unhinged 👍🏻

@kingpishful Месяц назад

I'm yet to get her book but im aware that its got some cool creative techniques in it. Some which she has shared in videos@@Bridge_Studios

@AM2PMReviews 29 дней назад

Nice homemade delay….Thank you….nice homemade delay….Thank yooouuuu

@davidpotsdam Месяц назад

Sounds Way GOOD

@TDOBrandano Месяц назад

I think a small hole at both the speaker and mic end will reduce the resonance of the air column in the hose, and shift the frequencies that get through a bit higher. A bit like playing the highest notes on a recorder.

@kensmith5694 Месяц назад

A bigger volume at the speaker filled with something like fiberglass would help a lot. This thing is far from airtight.

@InVacuo Месяц назад

Crazy! Literally 2 days ago I thought of this idea and wondered whether it would work! I was thinking of it in the context of hammering tuned PVC pipes but still. 😄

@Antony_Jenner Месяц назад

Musical plumbing for the 21st century!🤣🤣🤣🤣 Nice one guys.

@StellarWorks2023 Месяц назад

That Pipe Dreams track is dope!

@scottvogel8477 Месяц назад

I would gladly watch a series of you two just messing around with music ideas.

@dancoroian1 Месяц назад

Nice Rusko reference with the album cover! Got _Songs_ on vinyl 😁

@Krzychu-bh4rl Месяц назад

I would never think that such a simple thing would actually work 😮

@kensmith5694 Месяц назад

I dealt with coil spring delays a lot time ago. Instead of sending the sound down a pipe it sent it down a coil spring. They sounded good for being such a strange thing.

@timonsku 29 дней назад

Cool stuff! Maybe give hoses for pressurized air a try, the material used is much stiffer than the rubber in garden hoses which should muffle it less and they are equally cheap if not cheaper!

@HonestAuntyElle 3 дня назад

It'd be interesting to hear a side-by-side and removing the delay in post, so you can hear the sound difference a pipe makes.

@nathanherrold6887 Месяц назад

Loved this video

@sparkyprojects Месяц назад

Seeing you with the funnel and hose reminded me of Urban Spaceman by bonzo dog doo dah band, excet they used it like a trumpet, but swung it around The delay reminds me of The Symphony of Bang Goes The Theory