No video :(

Make ANYTHING look like metal!

Подписаться 79 тыс.

Просмотров 56 тыс.

50% 1

Need to make something look like metal? I got you. In this prop making how-to I'll show you how to make anything look like metal in two easy steps. So whether it's cardboard, plastic, wood, or something else, this simple technique will make your object look like it's made of metal.
Special thanks to Vaughan Baker for sharing this technique. Check out his video here: • Movie Magic. Faux meta...
BECOME A SUPPORTER!
Do you enjoy our episodes? Do you want a behind the scenes look and more? Consider supporting us on Patreon and help us make even more tutorials! / vanoaksprops
OFFICIAL VANOAKS PROPS MERCH:
shop.vanoakspro...
MATERIALS:
----------------------
Zinsser Clear Shellac - amzn.to/3ySZo4W
Graphite Powder - amzn.to/3wKSLQe
1” Chip Brushes - amzn.to/3fGQv6Q
Craft/Stir Sticks - amzn.to/2SK0Tln
150 Grit Sanding Sponge - amzn.to/3g1HPal
000 Steel Wool - amzn.to/3g7D6Uo
Green Scouring Pad - amzn.to/3yVLVcG
Plastic Finials - kingmetals.com
Nitrile Gloves - amzn.to/3cb11Bp
SEE OUR PAST MATERIALS LISTS:
www.amazon.com/shop/vanoaksprops
INSTAGRAM: @vanoaksprops
FACEBOOK: vanoaksprops
DISCLAIMER: Links included in this description may be affiliate links. If you purchase a product or service via the links provided above I may receive a small commission. There is no additional charge to you and it helps to support this channel!
#Halloween #tutorial #halloweenhowto #VanOaksProps

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 248

@evanrose9164 2 года назад

My Halloween costume involves a harness with a faux fence railing stabbed through the chest and I’m so excited to use this technique

@Craftlngo 3 года назад

It’s not that it looks like metal. This technique make everything look like _cast Iron_ which is very appropriate for a fence like you have shown. I could see this technique used for a cast iron cauldron. Great work Derek!

@VanOaksProps 3 года назад

Yes, absolutely. A cauldron would be a great use for this.

@FordFalcon1962nBlue 3 года назад

i like that idea actually because then you could hang it above a make shift ' fake flame ' like a witches brew

@susanowen1709 3 года назад

I wasn't going to save this one, but yes a cauldron you are absolutely right and I am A Fool.

@jhogan9728 11 месяцев назад

I want to make my stairs railing look like metal can I use this technique or should I use some metallic paint over somebody give me some help please

@TotallyTursiops 3 года назад

I love everything that you do…. I’m new to creating my own home haunt but I love getting techniques and ideas from VanOaks! Thanks so much!

@VanOaksProps 3 года назад

Thanks so much!

@Skoden_lures Год назад

This is pure genius, thanks for sharing your knowledge! I would never have thought of graphite powder.

@MsHaunt 3 года назад

Love this technique! I will DEFINITELY be using on our castle theme!!!

@VanOaksProps 3 года назад

Awesome!

@angesoie 3 года назад

consistently impressed by your videos

@VanOaksProps 3 года назад

Thanks so much!

@spoore3fe Год назад

I've got some tiki torch holders I made a while back when I was planning to build a star wars tiki bar for my patio. This will be the perfect bump to make them look better!😊

@VanOaksProps Год назад

That's a great idea!

@NancyPrior 4 месяца назад

Cheers 😊

@colechurch4223 10 месяцев назад

Going to try this on my kitchen stove hood vent surround! Thanks!!!

@jasperjanderson 3 года назад

I've never heard of this technique before. It looks great!

@FordFalcon1962nBlue 3 года назад

same i want to try it too!

@steeloscursehauntedhouse47 3 года назад

this is an awesome method!

@VanOaksProps 3 года назад

Thanks!

@jasoncarbone5553 3 года назад

Another fabulous illusion to trick the eye. Thanks Derek!

@VanOaksProps 3 года назад

You got it!

@VictorouslyVindictiveV 8 месяцев назад

Now that's what I'm talking about! what a great tutorial!

@VanOaksProps 8 месяцев назад

Glad you liked it!

@aliabolhassani5820 3 месяца назад

You are an absolute genius sir! Amazing!

@VanOaksProps 3 месяца назад

I can't take credit for the technique, but I appreciate the compliment!

@impact9310 3 года назад

Again- fantastic tutorial. Love the music. I restore vintage gas pumps but I often leave them rustic and “as found” but sometimes they are missing parts and I have to make them using brand new sheet metal or plastic. This obviously clashes badly with the original paint finish so I’m always looking for aging techniques.

@VanOaksProps 3 года назад

Thanks for watching!

@Samhains_Lot 3 года назад

Wow! I just tried this on something I’m working on and it looks incredible! Great technique…thank you for sharing!

@VanOaksProps 3 года назад

That’s great!

@Joseph.A.Creations 3 года назад

Never thought of using Graphite powder like this. Great job.

@VanOaksProps 3 года назад

Thank you!

@costumesforalloccasions 3 года назад

Great idea Derek!

@VanOaksProps 3 года назад

Thanks!

@RebelBaseBuilds 3 года назад

Very cool

@VanOaksProps 3 года назад

Cheers.

@jdaywork2693 Год назад

Looks great!

@VanOaksProps Год назад

Thanks!

@jdaywork2693 Год назад

I'm working on painting a cross that's designed after the candlestands Peter Cushing uses to seal Dracula's (Christopher Lee) fate. It looks like the idea crossed over (admitted pun) I to the CastleVania video game series, specifically CastleVania 2: Simon's Quest. I think the game requires Simon to have the cross before the final battle of the game. Those games took a lot of ideas from the Hammer films. I bought props that are the total inventory of the weapons and items Simon collects in the game. The Simon Belmont costume I have is based on the Captain N TV series for a bit of light haertness to round out the costume. Adding the cross to my inventory is very exciting! In my excitement, I used a lacquer instead of shellac. It seems like it'll still be ok though. My dad helped by building the cross from wood. Instead of it being separated candlestands, it's actually linked together to be a displayable cross. Thank you again very much for your suggestions! The graphite powder looks like it really brings the shine to the look!

@beautybee2x 6 месяцев назад

OMG it looks soooo good!! I can’t wait to try this for my home decor DIY 😍😁

@VanOaksProps 6 месяцев назад

Have fun!

@blizatrex 3 года назад

A really great trick to add to my tools.

@VanOaksProps 3 года назад

Glad you liked it!

@stephencarr356 3 года назад

Awesome! I'm on a road trip and the whole drive was thinking about watching this week's video! Finally got to watch it! And then realized the fence pieces I'm working on this technique will take forever for almost 30 ft of pvc fencing and finials... Lol

@VanOaksProps 3 года назад

Maybe just in spots?

@flywithbart 3 года назад

I'm in the same boat. I have 48 feet of pvc fence which I've done the faux rust treatment on already but now I want this so, yeah, pretty torn.

@peterheynen 3 года назад

This Halloween I want to setup a graveyard. And I will use this technique for the fence and gate. It simple looks AWSOME!!! Thank you very much!

@VanOaksProps 3 года назад

You’re very welcome!

@paranormalist 3 года назад

These are such great ideas! I run a magic venue in Baltimore and have thought about using some of these ideas to enhance the look of some of our late night shows

@VanOaksProps 3 года назад

You should!

@jessicapilgreen262 3 года назад

I really want to do this to my “haunted urn” to make it look less like plastic.

@VanOaksProps 3 года назад

You should! It's really simple to do and depending on how much texture you add can make something look really old or just kinda old.

@flytrapjohn 3 года назад

More tools to add to the arsenal. Thank you, Sir.

@VanOaksProps 3 года назад

Happy to share

@ROGUESQUADGARAGE 3 года назад

Very cool! Going to try to use this technique on my current project for the New Hope Camper.

@VanOaksProps 3 года назад

Let me know how it works for you!

@TheSmugglersRoom 3 года назад

This is awesome Derek!

@VanOaksProps 3 года назад

Thanks Brian!

@horses2by 3 года назад

It really looks like metal, awesome work and thanks for sharing.

@VanOaksProps 3 года назад

Thanks Susie!

@mariad4183 Год назад

WOW 😍😍😍!!!!!!

@matthewrmyers 3 года назад

awesome

@VanOaksProps 3 года назад

Thanks for checking it out!

@paulpardee 10 месяцев назад

Wow! Yeah, that's great! I love shellac, but I'd never thought to use it in prop making. I have a Witch King helmet that would really benefit from a treatment like this :)

@hauntjunkies 3 года назад

We need to upgrade our cemetery fences using this!

@owenlaprath4135 Год назад

Thank you for doing these videos, which I just stumbled over! While this is not immediately helping me with my N-scale model railway project (I need "platinum mist" silver-metallic SMOOTH paint for small locomotives), it gives me hope I may be able to mix my own paint with shellac :) I JUST found this video, because I am frustrated with the spray paints I recently bought. HALF of the cans I bought, almost all clear finishes and all metallics I bought, went back to store for refunds. Between puddling, spitting, running, and being anything but what was advertised, I am glad I tried it all on spare tosser shells. The biggest disappointment are so called silver-metallic paints by literally every maker at a big box store. They were all just plain grey, and the last can by Krylon looked like the model was covered in semi-transparent greyish slime, without as much of a hint of metal at all! I just do not remember any of these problems 50 years ago, when as kids we assembled all kinds of plastic kits. WTF happened to paints, which have also gotten ridiculously expensive?

@arigatoespacialsuperadmiti7316 10 месяцев назад

I looks incredible! maybe as a personal choice I would add some "welding" marks, probaby out of hot glue pressed with a piece of waxed paper before the texturing so it looks like metal pieces welded togheter

@Stiff_Richards 3 года назад

Unreal

@VanOaksProps 3 года назад

Yeah, it's a cool one for sure.

@emilyfox2072 Месяц назад

Love your Vids! Would u consider showing us how to make the Dark Academia aesthetic using Dollar Tree items and materials? ❤

@VanOaksProps Месяц назад

Thank you and thanks for the suggestion! I'll see what I can come up with.

@emilyfox2072 Месяц назад

@@VanOaksProps thank you! Aloha from Hawaii!

@pishposhomg 3 года назад

Thank you for sharing just found you and am in awe!! 😍

@VanOaksProps 3 года назад

Welcome and thanks!

@columbuskirby4064 2 года назад

Love the channel and I love relaxing and watching your videos on prop making. Your voice is very soothing almost ASMR but not trying to be creepy. I'm glad to be a subscriber.

@kelliglenn9431 3 года назад

You can also use baking powder to give a texture

@VanOaksProps 3 года назад

Yep!

@ImNotBoredImCreative Год назад

Love this technique! Thanks for sharing. I used it on a recent project and it has such a great look. It's featured in my most recent video, I credited you for the technique and put a link to this vid in my description. Hope that's ok.

@VanOaksProps Год назад

Glad it was helpful! That’s absolutely ok.

@howtohaunt 3 года назад

That looks so good! Not worked with graphite before.

@VanOaksProps 3 года назад

Thanks! Yeah, it really transforms the pvc

@KF1 3 года назад

Good job! I would use it on a katana's handguard to make it look like old iron. Currently have rockerguard doing the trick, but this would be better. The look I was going for is of something that had been buried a long time and was just recently dug out of the dirt.

@VanOaksProps 3 года назад

That would be awesome.

@johannacornier8592 Год назад

❤ love your technique

@gerrykenneth8875 6 месяцев назад

This was amazing!

@1shelskid 3 года назад

That’s awesome! Thanks for sharing!

@VanOaksProps 3 года назад

Thanks for watching!

@JoeMessteri 3 года назад

Nice Job, Looks great!

@VanOaksProps 3 года назад

Thanks Joe!

@GregPackard 3 года назад

Nacho cheese, mrs VanOaks would approve...

@VanOaksProps 3 года назад

Yeah she would!

@spacecaptain9188 3 года назад

This is awesome!

@glenbutler9611 2 года назад

Very innovative, creative hack! Just wondering if this trick could be used on rubber and plastic?

@VanOaksProps 2 года назад

Possibly, assuming you don’t need it to flex/bend.

@jimmycrum8107 3 года назад

Looks good , keep the cool ideas coming thanks

@VanOaksProps 3 года назад

I’ll do my best!

@JimAlaska49 3 года назад

Nice technique!

@VanOaksProps 3 года назад

Thanks!

@TheRebelsRefuge 3 года назад

Love this, I have a few uses for this for sure! Thanks for the great tips!!

@VanOaksProps 3 года назад

You bet!

@Big2bees 2 года назад

Looks nice. But would be laborious if doing large pieces like doors and gates. I'd rather use dark gray paint mixed with marble dust or very fine sand to create texture. Onve dry, I would then dry brush the piece with metallic paint ie. silver, or bronze. You can even add light wash of diluted teal color here and there for patina effect 😊

@VanOaksProps 2 года назад

Yeah, it all depends on time/budget. Thankfully there's a lot of different options to fit people's budgets (time/money).

@josephpierzga8602 2 года назад

I love how this turned out. I’m considering using this technique on a coffee table base to make it look more industrial. Can this be top-coated for a layer of protection? I’m wondering if the topcoat would stick once the graphite shines through the shellac.

@VanOaksProps 2 года назад

It can, although it will likely dull the shine of the graphite.

@timcoulson7340 Год назад

What size PVC pipes make up the fence in your video and how are they bonded? This is the first time I've seen PVC used for the horizontal fence piece. I think I like it!

@VanOaksProps Год назад

They’re 1/2” schedule 40 pvc pipes and they’re held together with screws. The finials are friction fit over the pipes by heating up the pipe first and then pushing them in place.

@WhiteysWickedWorkshop 3 года назад

HEY THATS NOT STAR WARS!!!! It looks pretty darn COOL tho! Ill have to store that one away for later! Thanks for vid Derek!

@VanOaksProps 3 года назад

🤣

@wolfman75 3 года назад

Awesome!!!! I am making a fence to put my zombies behind. Thank You!!!! 😲👍😎

@VanOaksProps 3 года назад

Sweet!

@MarcoBoerner Год назад

Great video, thanks! :) I want to treat a larger surface this way but it needs to be safe to the touch, rugged, and shouldn't color. How would you seal this without changing the optics too much?

@VanOaksProps Год назад

You could probably apply a neutral color shellac.

@kproductions9963 4 месяца назад

Fantastic job ! I really like the texture . I'm trying to create a pitted gold look on a 3d printed surface. This is the closest thing i can find so far but is a little too heavy for an ancient gold pitted look. Any suggestions . Maybe there's a finer powder ?

@VanOaksProps 4 месяца назад

The texture can be changed based on how thin/thick you make the shellac mixture. So it might work for your project with less powder to shellac.

@darrylqmiller 3 года назад

That's nacho cheese, that's my cheese! Seriously though, another great prop building tip. Made me get up, go into the garage and work on my new prop!

@VanOaksProps 3 года назад

That’s what it’s all about.

@williamlai5861 3 года назад

Beautiful beautiful,looks like real, can this use on exterior project like the front door?

@VanOaksProps 3 года назад

Yes, definitely but you'll want to make sure you use a polyurethane sealer to protect the finish.

@freespirit2221 9 месяцев назад

I know this video is a little older but I'm hoping so for a response to this question: I would LOVE to use this technique for wood appliques applied to my headboard/footboard for a New Orleans inspired vibe. Once the bed linens begin to rub up against the appliques, will they be stained gray/black from the graphite powder? Great video, thanks!!

@VanOaksProps 9 месяцев назад

They would need to be sealed to prevent the graphite from rubbing off.

@RebellePuella Год назад

This is amazing? Does the graphite leave marks if rubbed on anything? Is there a way to coat it without messing up the effect?

@VanOaksProps Год назад

It can, unfortunately. You can try sealing it with a satin clear coat, but run the risk of dulling the shine of the graphite.

@Sniper.925 Год назад

This is amazing man. I'm going to subscribe for sure. I play Airsoft as a post-apocalyptic sniper and I want to take my paintball mask that I use for paintball. It's plastic. But I want to make it look like metal. To give her that post apocalyptic look, I will be working on that in about a week. I'm actually using a specific paint for the rust. Look you can see in my page. I have a video on it. What do you think about that paint?

@jodinardella3011 Год назад

Thank you for this great video and detailed explanation. This is giving me some great ideas for a large prop project I have in front of me...maybe you could give me some advice on it? I have to make 8 (for a marching band competition) 8 foot high, 15 feet long prison jail walls. Were making the bars out of PVC pipe, but they will need to be colored and textured to look like jail bars. They also need to have this look from a large distance (they perform on a college football field with judges at the top of the stands). We have to color...wait for it...80 of these bars for this project. Any ideas? Also, I wanted to make the wood frames that go around the pipe look like maybe cinderblocks??? Any ideas for that?

@VanOaksProps Год назад

If the closest they’ll get is 10’ I would just paint them with a hammered metal spray paint. This technique would be nearly invisible beyond 10’

@jodinardella3011 Год назад

@@VanOaksProps Thank you - but some judges will be on the ground. I'll look into the cost of the hammered metal spray paint though - maybe do a combo of the two? Thanks again.

@VanOaksProps Год назад

@@jodinardella3011 to keep costs down I’d just texture the pipe by mixing in baking soda with your acrylic paint and then add some rust highlights here and there. I have a video on different textures that explains it in more detail.

@RyanLoetscher 5 месяцев назад

question that only a haunter might be able to answer cause we do weird things. I did this technique... but it was a massive application and I wanted real chunky texture and mixed in corn starch. I tested it on a patch first, and it seemed to work. I hardened and held and didn't scratch off. So I went ahead and did my whole project. however I didn't think to water test it. It doesn't take much for it to seemingly start melting away the shellac mixture. I tried using a spray clear coat and I tried going over it another round with shellac, neither helped. So i'm trying to think of a way to weatherize it. It's not going to be in open rain, but I still want to have it be more water resistant than it is because things happen.

@VanOaksProps 5 месяцев назад

Shellac is not waterproof, but is pretty water resistant. It possible that the corn starch is the culprit and it's absorbing moisture into it and causing it to fail.

@RyanLoetscher 5 месяцев назад

@@VanOaksProps ya I figure the cornstarch is accelerating the issue. I tried another layer of shellac to mitigate but no difference... I've already done a rather large project with it. It wont be fully outdoors, but things happen... do you have a suggestion for what I might use over it to seal and weatherize it better? don't want to just redo the whole thing

@aussiemachandmadeeverything 4 месяца назад

I really liked this fence & the idea of making it look like cast iron, but i wonder how to make very jaggered parts at the top of the fence, how could you create that, ( the pointy bits) lol i dont know what else to call them i cant think of the name im old & losing my memory ...what would you suggest ?

@VanOaksProps 4 месяца назад

The finials? Honestly, they’re really inexpensive if you buy them at kingmetals.com and I don’t know that you could diy them for less.

@blakegravitt3635 3 года назад

The graphite powder reveal was awesome. Thanks for the tip. Any suggestions on a piece to make a "weld" in some of those joints? Thanks as always!

@VanOaksProps 3 года назад

I had a thought, but it hasn't been tested. If you mix it thick enough you might be able to pipe it (like cake frosting) to look like welds.

@darrylqmiller 3 года назад

Maybe create a "weld" bead with hot glue, then paint and then do this technique. Seems like it would work in my mind.

@blakegravitt3635 3 года назад

Both of those sound feasible. Appreciate the advice!

@jimmycrum8107 3 года назад

Paintball Caulking laid like a weld.

@jimmycrum8107 3 года назад

Paintable

@anthonyvera8524 6 месяцев назад

You said it already had some texture before you started. Would this have the same effect had it not already started with the previous texture?

@VanOaksProps 6 месяцев назад

Yes. The texture that was on the pieces at the beginning have very little, if any, impact on the graphite texture/finish.

@tamarajohnson7987 Год назад

How do you think this technique would work with wood spindles on a staircase?

@VanOaksProps Год назад

It would work, but you'd need to seal it to keep the graphite from rubbing off on your hands, etc. from daily use.

@jakem3422 10 месяцев назад

Is there any sort of protecting clear coat you can put on this? I'm thinking of doing this to a BIG cannon prop.

@VanOaksProps 10 месяцев назад

clear spray paint should do it, although it will dull the metal finish a bit.

@grantrizzi3124 Год назад

If you were to add rust with this (using the salt mask technique), would it be better to paint take the salt off before the graphite mixture, or after?

@VanOaksProps Год назад

After. That way the rust is on the top layer.

@grantrizzi3124 Год назад

@@VanOaksProps Thanks!

@trytofinishsomething 3 года назад

I am going back through and watching some old videos that I have saved for future projects and just wanted to say how much I enjoyed this. Were the "tips" or finials on the pvc made out of?

@VanOaksProps 3 года назад

They’re abs plastic

@trytofinishsomething 3 года назад

@@VanOaksProps NIce job ... those 3D prints really sell it too! I would have sworn those were real and put on pvc "poles".

@VanOaksProps 3 года назад

@@trytofinishsomething oh, they’re not prints. They were purchased at kingmetals.com

@spacecaptain9188 3 года назад

Would this work on regular use objects? For example, if I use this graphite and shellac mix to paint my wardrobe to look like some kind of monstrous iron maiden, will it rub graphite all over my clothes as they brush the doors? If I paint it onto the banister, will it leave graphite all over our hands from normal use?

@VanOaksProps 3 года назад

The shellac would harden, so if it was meant to be flexible you wouldn't want to go this route. As for high traffic objects, you'd want to clear coat it to prevent the graphite from rubbing off.

@augustochavez9449 2 года назад

Yes! I think this will be perfect for a Witch King of Angmar-like paint job I am looking to do for a mask project! Do you think for that a black or silver base would be a better idea? Thanks as always for the great videos

@cam-inf-4w5 Год назад

Great video. How would i make round things like half spheres or like a helmet? My brain cant think of a daily object for that like bowls always are flat on the bottom. Do they make pvc stuff you could use for that?

@VanOaksProps 11 месяцев назад

Check out acrylic spheres.

@octave.sacree 9 месяцев назад

Hi ! Fantastic ! I made a steampunk arm with Eva Foam. I saw a post where someone asked you if you know if it works on it, and you said you will test. Did you do ? Thanks a lot !

@VanOaksProps 9 месяцев назад

Thank you! I haven’t tried it yet

@octave.sacree 9 месяцев назад

@@VanOaksProps Ok. I will try... but I can't find the Zinsser Clear Shellac in France. Do you know another product which works ?

@VanOaksProps 9 месяцев назад

@@octave.sacree unfortunately, I don't. Any shellac should work, it doesn't specifically need to be zinsser brand.

@NancyPrior 4 месяца назад

Hello, This technique is what I'm looking for, for my small project. However, this looks like it was done on a piece of metal that is already coated. Can I get this same look from a fresh, untouched piece of wood? Also, is there another product other than shellac that can be used. Small cans of shellac are not readily available to me. Thank you

@VanOaksProps 4 месяца назад

Hi! The base for the technique was PVC pipe and plastic finials. I think I mention it in the video (I can't recall, it's been awhile). That said, you should be able to achieve a similar effect on other materials. Unfortunately, shellac is the only thing I've found that works for this approach.

@AndrewHarbert13 2 года назад

How do you make the top fleur-de-lis section?

@VanOaksProps 2 года назад

They were purchased at kingmetals.com

@pamelaprice1890 2 года назад

Can this be done on wood, would like to do on stair spindles ? Thanks

@VanOaksProps 2 года назад

Yes. Although keep in mind that you’re exposing graphite. So if you put your hands on the spindles they’ll have graphite on them.

@Ren4U2 2 года назад

Wonder if this would work on a large plastic cauldron.

@VanOaksProps 2 года назад

It will!

@Ren4U2 2 года назад

Cool! Was thinking maybe the surface was too large. Thank you so much for the inspiration!

@603VIL 2 года назад

Love this technique! So amazing. You mention using burnt sienna to add the rust look back in. Would that be burnt sienna oil paint in the tube? Also, what method of application do you recommend for this part? Dry brush? Or perhaps an antiquing method where you apply it heavy and then wipe it off? I'm making some Spawn brooches with the chain and I want to make it rusty but still show some metallic features. Thanks Derek. Always appreciate your help. 🤘💀

@VanOaksProps 2 года назад

Any kind of burnt sienna paint (oil or acrylic) will work, although I would suggest acrylic because it dries faster. I'd use a chip brush and lightly dab it to build up to your final rust amount.

@603VIL 2 года назад

@@VanOaksProps many thanks as always. I'll send ya pics when it's all "said and done". 🤙

@gtav218 3 года назад

A really awesome hack 😃👍 I think I will try it for my boring black Stratocaster Pickguard and the Inputjack. Does it work on chrome? 😮 Thx and greets from Germany 🙂

@VanOaksProps 3 года назад

Thank you! Not sure how well the shellac will stick to chrome.

@gtav218 3 года назад

@@VanOaksProps Ok I tried it on my chrome neckplate and it worked not really good on chrome. I think you have to let dry the first coat and then paint a 2nd coat over it with the structure. 🤔 But it worked great on the pickguard. It looks awesome now. 😁

@VanOaksProps 3 года назад

@@gtav218 Did you scuff up the chrome before applying it?

@gtav218 3 года назад

@@VanOaksProps No I didn't scuff it up. I thought about it but I was too lazy to do it. 🤦‍♂️😕 But I can try it with the other neckplat side.

@travisshallenberger9486 3 года назад

I'm already thinking of what idols and such I can apply this to. Nice video of a really cool technique! I was wondering what the step after sanding would be, then realized none was needed. One question though, do your hands get that pencil powder type grubbiness from handling the object? And if so, can it be countered by a layer of clear coat, or would that lessen the effect? (OK I lied, 2 questions, maybe sorta 3.)

@VanOaksProps 3 года назад

They do get grubby after sanding, so you’ll want to seal it with a polyurethane sealer

@rifleman7313 Год назад

I was wondering if there are methods to make fiberglass look like bare steel. On cars such as Chevrolet Corvettes, Pontiac Fieros, etc that use fiberglass in the body, doors, hoods, roofs, etc. Thanks.

@VanOaksProps Год назад

There are a variety of automotive grade metallics that should be able to get you there. I’d check out imperialsurface.com

@rifleman7313 Год назад

I appreciate your insight, I will most definitely look into it thanks.

@KerriGilpin 2 года назад

Wow, graphite powder. Genius! I wonder if you get similar results by rubbing a graphite stick on a textured surface … 🤔

@kevinkelly8444 3 года назад

Bro, do you have your logo printed on the mixing cup or is that a sticker?

@VanOaksProps 3 года назад

It’s a sticker. The coffee company doesn’t need any more publicity. Lol

@kevinkelly8444 3 года назад

It would have been pretty kick ass though.

@whatthehellpeople 2 года назад

Is there a version that's flexible? Like, could this be made with (clear) acrylic mediums instead of shellac?

@VanOaksProps 2 года назад

I don't think acrylic would work the same, especially since you need to be able to remove some of the bonding material to get a polish on the graphite powder. Are you wanting to attempt a similar finish on EVA foam?

@whatthehellpeople 2 года назад

@@VanOaksProps I wanted to do some corroded iron details on a piece of furniture, and worry that the shellac would be too brittle to last in the face of daily use.

@VanOaksProps 2 года назад

@@whatthehellpeople shellac is primarily used on furniture, so it should be alright. You’ll want to seal it once it’s dry otherwise you risk getting graphite all over your hands/clothes.

@NervousNecromancer 2 года назад

I'm struggling to get my hands on clear shellac, woukd it be possible to sub it out for varnish?

@VanOaksProps 2 года назад

Tinted shellac should work too.

@petedevlin8268 3 года назад

So I’m rewatching this video again, and I’m wondering: As your sanding down the textured areas, are the leftover particles reusable for multiple applications?

@VanOaksProps 3 года назад

Good question. I'm not sure. It wouldn't be if you used the steel wool but might be if you used sandpaper. The steel wool leaves too many bits of wool on the table to extract the graphite powder from.

@solemnbuddhist 13 дней назад

Is there a substitute for the shellac?

@VanOaksProps 13 дней назад

Not that I’ve found yet.

@solemnbuddhist 13 дней назад

@@VanOaksProps ok thank you anyways

@carolynmcpherson2667 2 года назад

Hi! I'm brand new here, making Christmas ornaments, and I've just 3-D printed some 4"-high Japanese "granite" garden shrines. What would you recommend for touches of moss? And yes! I've just subscribed to your site.

@VanOaksProps 2 года назад

Hi Carolyn and welcome! For moss, I'd probably start with model railroad grass, the kind that can be dusted over PVA glue.

@carolynmcpherson2667 2 года назад

@@VanOaksProps Great idea! Thank you.

@yodaparseghian3213 Год назад

If using on EVA foam, do you need to finish the item with a clear coat?

@VanOaksProps Год назад

I’ve never tried it on eva foam and I’m not sure how it would respond to the flexibility of the foam.

@yodaparseghian3213 Год назад

@@VanOaksProps One, thanks for responding so quickly and secondly, I'm about to spray my eva project with plasti dip that has already been heat formed, so I'm not as worried about the flexibility aspect of the project, I'm more so curious if would you say that the shellac would react to the plasti dip itself

@VanOaksProps Год назад

@@yodaparseghian3213 I’ve never tried using them together, so I can’t say. I’d do a test and see how they react first and go from there.

@yodaparseghian3213 Год назад

@@VanOaksProps Okay, thanks again. You're responses are very much appreciated Sir Van of Oakprops

@madambutterfly5343 3 года назад

Any suggestions on weather proofing this for outdoor use. My son wants to do a grave in his yard surrounded by old fencing.

@VanOaksProps 3 года назад

Great question. Any polyurethane sealer should do the job.

@madambutterfly5343 3 года назад

@@VanOaksProps Thank you! My son owns a house that’s over 100 years old. He’s wanting to have an old grave site in the yard year round. This will be perfect for that.

@heidim6468 2 года назад

Will the Shellac and graphite powder work on cardboard

@VanOaksProps 2 года назад

Great question. I’ve never attempted it, but considering the cardboard is porous, it should bond to it.

@bajillian7353 2 года назад

I love this so much! One small problem: I am having trouble finding any shellac (tinted or clear). Is there anything you would recommend as a substitute?

@VanOaksProps 2 года назад

Most hardware stores carry it in the paint department. Unfortunately I haven’t found a good substitute yet

@bajillian 2 года назад

@@VanOaksProps - thanks - I’ll keep looking - according to the guy at my local store, there is a shortage at the moment.

@GeekyRaptorStudios Год назад

yeah but how do you make it look like rusted metal? edit: this is for a plastic model of a dumpster so I want it to really look authentic like it was exposed to the elements!

@VanOaksProps Год назад

I have a few different videos on rust paint. So check those out.