Make SPY CAMERA from old phone | scientific ideas 2020 

Spy camera in a clock: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ve16SuyXtTs.html

Ahh, the incisor wire stripping technique (off-camera). PRICELESS!

17:30 - Quick tip. Tape the camera down with some Kapton tape. Tape the four wires down close to where they will go also with Kapton tape. Hold them in place with tweezers to aid soldering.

I like how you were slow to tap the screen in sync with the recording that was playing on the phone to make this look legit

It's amazing that used cellphones can be used in the hands of creative people like you.👍🇮🇩👍

Great work! I thought I was the only one who makes things like this..plus great soldering job, especially not using a super fine point soldering iron! Those camera wires are damn hard to see and work with sometimes..Keep up the awesome work! Just subscribed..

What was that thumbnail...🤫🤣🤣😂 Anyway good idea..

I need this to look inside engines to see burnt ir bent valves to show my customers. Perfect. Must do this project.

You know all the perverse uses that could be made using that thing, it's MAGNIFICENT!!! :)

Owesome project 👍... What phone model and how did you find the usb pin???

muy muy bueno el video lo que me uvi9eragustado es que puedas explicar ..por partes sobre la camara saber mas

What a fantastic video! Very well done! Up close viewing with the specifics. Written out what was needed to know. Very very well done!! Thank you for sharing this!

Great video. I love how you are able to get close up. I just subscribed. Love your work.

Just simple and neat - Great

You are doing great work 👍

Absolutely amazing advice ♥️♥️♥️

A very nice device that should be installed at home for protection

What should be different about connection pins when connected to multimeter

Привет! Классно придумал👍 теперь нужно эту мини камеру подключить к wi-fi модулю.

Transporting old camera lens with an otg usb.. Wow.. Fantastic..

Absolutely amazing advice

I really liked,it thank you

Great for finding out if something you've misplaced has fallen behind a dresser or book shelf without having to move it to see what's back there.

You're amazing Brother, Nice Work No comment.

This is absolutely amazing advice

سلمت يداك رحم الله الي يعلم بلا بخل ولا خفايا الله يبارك فيك

Wire diagrams would help us.maub fte some kind of directions to where to soder them on the camera.

Very Nice. Have to try this to I have thousands of old phones

😂What a beautiful idea. No component no IC. Excluding the important things, a beautiful spy camera was made.😝 Thank you😅

Wireless SPY camera ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4YGvEJBDBd0.html

Spy camera saya suka dgn karya Abang , sehingga menambah pengetahuan bagi saya pribadi dan masyarakat umumnya. Trima ksh ya ... Sdh membagi ilmunya

Obrigado pelo conhecimento

wow. good job bro 😍

Awesome!!!Great job!!

as long as we didn’t know we had such masters

Super nice idea lods..thank you for sharing this video...👍😁

Mobile Phone camera modules follow MIPI protocol mostly. I wonder how you have managed hook it directly to USB. Please post a brief about interface topology.

i didn't find tbe schematic, how to identify the wires ? good work👍

Super bro .now I going to try with my old phone

Can you replace the usb with receiver for wireless transmitter with about 2km range?

great work bro love and support from Engineering Fun And Crafts

Nice project but how to identify the wires in golden paper board?

The finding pins is a mistery...

Excelente video y muy útil; gracias por el aporte .

For those asking how he found the camera pin connection diagram: Using multimeter before removing the camera from phone motherboard, then 1. GND is very easy to find, it is shorted to GND of the phone 2. V+ is the 5V input from phone (this might be the hardest to find if you don't have experience in tracing the input voltage). Find pin that has no connection with the GND (but there might be more than one). The OP found out using diode test but does not show which one to test. Another way to find out 5V rail is to find the Power IC or Mosfet that gives the 5V to whole motherboard and find the direct connection. While the data lines are typically not directly connected to power rail (it has connection but has pull-up resistor like 10k Ohm) but directly connected to one of motherboard SOC leg. 3. Then the rest of D+ and D- are found by trial and error (using permutation). First, the testing is done by soldering & jumpering the pins of the camera (while camera still attached in phone board) directly to USB and then PC as seen in 8:09. And NOTE that only some cameras support direct USB interface. So, this will work only on few phone models. And if you guess the 5V line wrong, you might permanently damage the whole system.

Would be easier with a much smaller tip when soldering small components together

Absolutely amazing

8:35 hello bro why you selected it in diode range? What pinouts you targeting at this point

But how do you know the difference between the positive electrode and the negative electrode? Thank you for the idea

Oh vainglory haha, i love it, too

Woow, i want to try it. Good job bro

22:53 самые лучшие провода зачищенные своими зубами...🤣 Я всегда так делаю сам.

What a good carnal video, a question, how do you know which pins to use?

Great project ,I would like to ask you how did you find which wire you need.And the wires function

انت حقا مبدع رغم طول مدة المقطع ولاكن كل دقيقه فيه مفيدة جدا ويستحق المشاهدة وحقا انت تستحق الشكر والتقدير

Mas bro..mau nanya ..ni..bukan jcsat 4b udah off air skarang..atau pon ma c ada lgi..

Bro I'm new one here ❤️, awesome video , can you show more clearly how to find out the pins of the camera

Impressive eyesight and zoom from the cameraman.... As a fellow bot, I can relate to this

Wonderful work😊👍👍👍

Wow that's awesome idea, plzz can i hv more of the videos thanks,

Mini spy camera in awasome My query 1) does the mini spy cam for recording also for hours 2) where can we get the surface paper as used in this project

How did you seperate or analyze the input (data in ) output (data out) pin connections ...it is not clear ....and why did not use the right color code during soldering?

hopefully the next video will include the speaker and how to do it .. Thanks

Wow without any module? Or driver board?

I really like your pliers 😅 where did you bought it? 😂😂😂

Great idea i can keep the flash? Better for look inside de wall dreain pipes.

No entiendo para que soldar el USB, puedes hacer un plano para las conexiones del flex de la camara gracias

Good! I think it may help to read part number from components especially to those who have sight problem like me .Tnx!!!

You're amazing bro..just great🔥🔥🔥

congrats :)) good work

Well done....nice work👌👍

Hola en donde puedo conseguir este tipo de cámara y a que precio

How to know the connection im confuse

U didnt showed us which one is cameras power neagtive and positive and which were are data wires besides u took so much old key phone camera probably of some old 1.6 mega pixel camera and its output is like an hd cam?? U soldered all those camera wires randomly short circuting many wires with solder, and at they end u have used already sold in market otg cam, dnt fool us...

that was a cool vid to watch but not sure why you wrote down the numbers on the pad ? also i have a challenge for you the nerf nightfinder scope is very basic IR scope the leds can be swapped out for better ones but the screen inside the scope is bad and the zoom is a digital zoom on a tiny pixel screen any chance you could look to improve it some how would love that vid and then i could copy to improve my own lol keep up the great work

Bravooooooooooooooooo, abs.respect, from the old BG.

Amazing! I'm new subscriber.. you have a tutorial to find d+ and d- and positive?

muito bom parabéns vou fazer um microscopio

अच्छा प्रोजेक्ट बनाया सर साथसाथ सप्लायका + और - के साथ डायग्राम बताते तो मजा आ जाता।

You are awsome. Thank you for y9ur hard work!

I would like to know why you didn't show what wire to hook on the right path of ribbion

Why is there someone else working in background....??.... Cool..!!!

Thank you so much.

Love it's where to buy black cord USB??

how to identify the wire terminals to make the cctv spy camera at home makes a video

agradeço pelo conhecimento "congratulations"

Nice. Good Job dude ....Keep going !

No first you have to break it apart remove vibration motor completely then speakers completely then find back lighting wires make mini switch to disable screen . This will keep you from getting cought.

Give a specific diagram for the wire connection to camera, that would help

And the prize for the most tasteless thumbnail of the year goes to........

مشالله..عليك...كنشكرك..علا...هادا..فيكرا..راءيعه..

Wow it’s really great 👍 nw thnx a lot

Today I will turn an old camera from a broken phone into a spy camera. This camera has a resolution of 0.3 Mpx. Quite low because it was manufactured in 2010. However, it has USB interface. Facebook group : bit.ly/CreativeElectronic

This is been something I have a problem with anyone who claims they can use any pins on the camera module to USB conversion. It just doesn't work that way. I guess he meant to show the camera module number at the beginning from there he took down the numbers 12, 4, 16 and 20 for this module but he doesn't show the part where he supposedly read that from some module white paper. In any camera the control module has a make and model.. you can search for information on the web.

Hello my friend!. Do U know by the way, to make the same with an old blackberry camera? It's also good to know the pin values.

Thanks👍

How do i know the correct connection of wires?

can you expland how to measure the + - data+ data- ? cause my camera is different with u thanks before

Ur awesome yarr......ur so intelligent.....great man...🤘🤘🤘👍👍👍

🤣😀adoi laaa......wayar lebih tu hang connect kat lubang pungkoq hang.....make sure it's 4G and above