There were many ups and downs in this build, I do like how the over all project turned out. However, I had to cut three pieces of Extruded Acrylic Mirror, before I could finish it up. Follow along in the journey as I totally destroy two of the cut pieces. Fun thing is the CNC machine was not to blame or even the cause of the issue, its me and using Novus 2 & 3 , with out testing. I do not hold Novus responsible, for any of my bad choices. I have used it on several of my Cast Acrylic Projects with great success. Please note that Novus 1 was fine, it was only with Novus 2 & 3 that I had issues.
YOU CAN GET THE NEW MK2 LONG MILL HERE (These are affiliate links that help support the channel and add nothing to the overall cost):
sienci.com/product/longmill-m...
60 Degree V Bit
sienci.com/product/60-degree-...
1/8 Precision Collet for Makita RT0701:
sienci.com/product/1-8-precis...
I will post a link to the Double sided tape as soon as it gets in and I confirm it is the same as the stuff I used on the last mirror part.
Transparent Ocean Blue Acrylic:
amzn.to/3KadfKa
M3 Screws:
amzn.to/3TbLlBx
1:24 - MATERIALS
3:30 - Going over the different layers & Bits used
10:51 - Destroy First Mirror
17:03 - Second Mirror Ruined
17:32 - Wrapping the Project up
22 авг 2022