MAKE THIS BUTTON BOX | 32 FUNCTION w ENCODERS

Подписаться 221 тыс.

Просмотров 2,2 млн

50% 1

How to make a DIY USB button box with encoders. A 32 Function button box for Sim Racing, also suitable for Truck simulator or Flight Sims. Design and build the layout, size and function for your requirements. Based around a Arduino Pro Micro.
The 18-page Build Guide available here: bit.ly/2HeizNj
Build your own the same!
Parts
Switch Covers ebay.us/vBH7B3
Momentary toggle ebay.us/PjNZbu
Start button bit.ly/3BglL4T
3 way toggle ebay.us/yqA5a7
Push button ebay.us/YVu0rh
Encoders ebay.us/Wwq6nv
Suitable Encoder knobs ebay.us/gHGb4l
Usb cable ebay.us/MiPZ5r
Box ebay.us/Su6nZj
Carbon Vinyl ebay.us/ItSYEQ or BG bit.ly/2JhDwa8
Pro Micro bit.ly/3y2foQw
Solder BG goo.gl/Ni6n4P
Soldering iron goo.gl/Ahq8e2
Wire eBay 22awg ebay.us/aDR5Pq
Wire strippers goo.gl/4PFXny
Side cutters BG bit.ly/3OXj6mS
Best Soldering Iron ebay.us/VIwU6k
This site contains affiliate links for which I may be compensated
How to assign the buttons to keyboard
• HOW TO ASSIGN BUTTON B...
Enjoyed the video and project support with a tip
amstudioprojec...
How to make a Simple Easy 12 Function USB Button Box
• BUTTON BOX | EASY DIY...
Thank you for watching, all questions and feedback are welcome.
If you know someone interested in this Video please share it with them.
Check here for other Sim Racing, Mods and DIY projects.
/ @amstudioprojects
Sketch bit.ly/3152ALk Library github.com/MHe...
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. creativecommon...
FOR PERSONAL USE ONLY NOT FOR RESALE.
Copyright © AMSTUDIO 2018 All rights reserved | amstudioprojec...

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,4 тыс.

@coryhalvorson8874 6 лет назад

I'll be honest, it took about 8 times watching this video to finally get everything figured out. Persistence prevailing I soldiered on, finally finishing a box with 2 toggles, 10 momentary switches (14 including the momentary switches on the encoders) and 4 encoders. I feel accomplished, thank you for laying this out in a very organized, easy to understand, and quick fashion.

@amstudioprojects 6 лет назад

Good work, Enjoy!

@DvjUpset 6 лет назад

I want to make a MIDI, does this method works? I send the code successfully to my promicro, but in OSX the MIDI doesnt detect anything :(

@fosty. 2 года назад

or did you... solder on?

@MChill111 6 месяцев назад

This is probably the single best instructional video I’ve ever seen on RU-vid. THANK YOU!

@Mielech-cq9fi 4 года назад

Now, during quarantine all over the world, RU-vid recommendations show me your channel. They want me to spend all money on building Sim rig instead of food. Seems legit.

@deeze67 4 года назад

Same here man... and also from Poland :D

@robinhilkert2573 4 года назад

@@deeze67 do you guys know weher to get the sketch ?

@tombonge 4 года назад

@@robinhilkert2573 I'ts in the list parts in the description.

@simracingastur9080 4 года назад

Ya somos dos! es fantástico este canal. Yo ya me metí en un montón de proyectos empujado por amstudio

@josephbadams1 4 года назад

It is.

@joshuamartin4547 7 лет назад

This is fascinating, and very well explained. This has, in seven minutes, opened a door to an entirely new realm of electronics projects for me. I haven't comprehended the concepts behind button matrices until watching this video. I've built basic synths, effects pedals, amps, and video game controllers including gated shifters and custom game pads and have really needed to understand this concept for years. Now I understand fully, and can use this method creatively for lots of awesome projects with or without the arduino board. I can now create projects involving much more complex input panels. Thank you!

@cyaerials6728 6 лет назад

Joshua Martin Hi ,im planning to make it but .. do i need a driver on my pc to communicate with the arduino. i dont mean coding but i mean arduino sending signal to pc

@mrj3217 Год назад

@Cy Aerials did you ever figure this out? I bought the plans and I can't find the correct Auderno software that goes with the button box?

@JustinWoodTV Год назад

@@mrj3217 the software is linked in the PDF for the build. I have been messing with it for a week now and the onlything the software will do is recognize that an arduino board is connected. Cant get any code to load or even show up in the software. I have wasted $80 and a week of my time on a decoration for my rig.

@billdeitz1065 8 месяцев назад

Do you keep getting 'JOYSTICK_DEFAULT_REPORT_ID' was not declared in this scope? I still can't get past this😢

@WARTIMEGAMING 7 лет назад

Good video. Button matrix explained in 7 mins with code. Going to save a lot of ppl time and money mate. Good job. Keep it up. Hope some ppl value your content and donate to you bud.

@England91 6 лет назад

Steve Kirk with this video anyone can make a professional PCB circuit board from like jlcpcb which can extend the life and useability and look better

@gordondatrain 5 лет назад

Where to buy these button

@maff1917 5 лет назад

@@gordondatrain Try the internet :P

@tlofrank5689 4 года назад

@@England91 is jlcpcb a youtuber? And once you design it, where would you go get it made?

@jacksonlundquist1674 4 года назад

Its stuff like this that really makes me miss the convenience of Radio-Shack

@vyladence 4 года назад

yeah I'm seriously bummed they went out of business

@kaboom1252 4 года назад

@@vyladence there are still some stores out there and u can check out their website too!

@psyolent. 4 года назад

Yep, was Tandy here in Australia. We also had a competitor called Dick Smith. Then came along Jaycar ..... who's prices are now no longer competitve, if you want convenience you have to pay a price.

@jayjames9520 4 года назад

Childhood Flashbacks

@H3xx99 4 года назад

@@vyladence they pulled away from the hobby aspect and tried to compete with Best Buy for big electronics. It was a huge mistake in judgment.

@simonl7784 6 лет назад

Very nice.. Just one little thing, I suggest you test every thing before you glue the board in place.. Just to keep Murphy in check! Great vid, thank you

@NadavFedida 4 года назад

ol' Murph will catch you out if he can..

@cipher7565 4 года назад

I just discovered this channel by searching for buttons. Oh man.. all this knowledge! Thank you for everything you've made so far!

@krozareq 2 года назад

Really nice way to go for flight simmers and far cheaper than pre-built ones. It also looks professional too.

@abhishekbaiju 5 лет назад

With this idea i made a euro truck simulator with all functions

@fata__morgana 4 года назад

show us brother!

@Darius-fb8xo 7 лет назад

Your videos have really taken a step up. Amazing job!

@Incognist 2 года назад

currently using all the parts listed for a button box for ets, building most of it tonight Edit: Is now built and works amazingly, Thanks for the tutorial!

@ryanlawrence1764 8 месяцев назад

Can you use multiple buttons at once though? Seems to be most people's problems

@Incognist 8 месяцев назад

@@ryanlawrence1764 when you press more then 3-4 buttons at a time you will get ghosting, and occasionally the buttons that are on the same line pins can sometimes flicker ( when pressing multiple ) but i've never had a big enough issue to need to add any form of anti-ghosting

@kry0cera962 8 месяцев назад

@@Incognist at 6:13 what does the creator mean by "upload the button box sketch to the board"

@Incognist 8 месяцев назад

@@kry0cera962 Hes talking about the code created which you edited to your individual buttons. Eg you edit values if you have a few more rotery encoders or put the buttons on different analog pins. Then it stores the code on the arduino board so that you can unplug and it still be on the board

@tuomasantero 7 лет назад

+1 patron. Never felt the need to support any "youtuber" financially until now. Totally love the quality of your work. The little details like adding links to where to get the parts (even though I use ebay) and answering questions in the comment section make this channel so great :)

@osman4738 5 лет назад

Just bought the guide, the breakdown is idiot proof, i will be using this to replace the console buttons in the sim rig im building out of an old mercedes. I didnt even think something like this was possible, thank you for your videos

@asciblue 6 лет назад

Best tutorial I've found in a solid 2 weeks of searching. Thanks for being simple and declarative!

@simracer1256 2 года назад

Where has this guy gone? No posts for a year.

@ge2719 3 месяца назад

he's just still trying to decide what to map all the buttons to.

@mark2380 5 лет назад

too many people use arduino and forget the use of transistors used for encoding and decoding led switches and functions while at the same time adding complexity an variety to projects arduino lack.thanks for sharing

@BillSmithem 5 лет назад

Nice job. I just built one, not as pretty as yours, front panel and case are plastic and wood scraps, and I added one more switch, works great. Thanks.

@MindstormExpert 4 года назад

Once I have coded it, and uploaded to Arduino, how to I then communicate Arduino with computer? Do I need additional software? Or just a game?

@BillSmithem 4 года назад

@@MindstormExpert If you've done everything right, just plug it in and a PC will recognize it as a HID. What it comes up as in games depends on which Arduino you used. Mine all show up as Arduino Leonardos.

@CARdio1203 3 года назад

Just wanted to say thank you for this video. My button box worked on the first attempt. Pure Gold!

@MrArno1998 7 лет назад

dude keep making these great video's! i realy love them and you just show how easy it actually is to make simracing products that normally kosts a bunch of money! keep doing great work man ;)

@weeksracing 6 лет назад

Another awesome video by amstudio! You deserve a medal for your contributions to the sim racing community! I have combined this project with your TM1638 dash to create an EPIC button box. Keep up the good work!

@basstrammel1322 6 лет назад

I've just bought a ton of parts and a new soldering iron, can't wait to make my own button boxes!! Went for the wood grain vinyl though, fits me good as a FS, ATS, and ETS2 player :)

@basstrammel1322 6 лет назад

Hey buddy, I'm not that far yet.I was stupid and bought several square switches, and making the holes for them took ages with an exacto knife... I have 46 functions, I have no clue how my grid or sketch will look, haha. I'm using the USB Joystick PCB for 10 of the buttons, though. It will be 2 boxes in 1. Btw, anyone, go for the round switches. And prepare for micro soldering, the arduino card is TINY.

@basstrammel1322 5 лет назад

If anyone is hesistant to do this because of the soldering, don't worry. You can hot glue dupont wires to the arduino. I'm also ditching the whole box part of it and using a 30" x 12" piece of plywood mounted straight onto my wheel base to have a dashboard. With a slot and 2 x 2" holes for my old smartphone that runs SimDash, it's going to be a wild setup for a few dollars.

@dantheman9565 5 лет назад

@@basstrammel1322 Would love to see it, sounds great

@Xatinni 4 года назад

Thanks for the video and detailed instructions, had a little false start by trying to be clever and reuse a Arduino nano. Pro micro finally arrived and now works perfectly..Very happy camper. Thanks again

@mmda81 7 лет назад

Pretty much the channel I always wanted to make, but was to lazy for. thx!

@worpd_gamer270 2 года назад

I love this idea. I've got 2 printed out (left and right boxes) with some small edits. I made new brackets that angle the boxes slightly up and in - more like a fighter cockpit. I've adjusted the arduino code slightly as well which will allow more functionality of the buttons/analog sticks. I have them plugged in and working, but have more buttons ordered and on the way to complete it!

@smuncki8 Год назад

Hey did you use the pro micro arduino?

@worpd_gamer270 Год назад

@@smuncki8 yes! specifically with the ATMEGA32U4 chip. I also used terminal connectors in case I decide to change things around... colors, button type, easier maintenance, etc. No soldering required.

@CheffBryan 5 лет назад

A fantastic build idea, especially for the encoders. Personally, I've taken apart an old keyboard, followed all of the traces to mark which pins go to which keys, and am working on a button layout to solder everything in. No programming needed at all, and I simply have to wire the buttons to the keys already used in games.

@CheffBryan 5 лет назад

@Bạch Văn Hoàng Bảo Well aware, simply took common key layouts for all matter of games, and configuring a soldering chart that conforms to it.

@acmarston 5 лет назад

Would it work out a lot cheaper to do it this way?

@cyberleone00 Год назад

I have always been a big fan of your videos but never thought i'd build one myself. i accidentally bought a button box online but that doesn't have wires or anything so i will venture into doing it all myself with your guidance, will keep this comment up to date! Thank you.

@andrewcottingham858 5 лет назад

No one: Am studio: hi can I buy a square mile of carbon vinyl

@lucvandenbosch4844 5 лет назад

Good one!

@drewbutler1326 4 года назад

if i didn't use literal dirt as currency i would too lol.

@andrewcottingham858 4 года назад

Follow up I just made it works so well its sick

@RichBiggs 4 года назад

I appreciate the detailed tutorial. I just completed this USB button box. Huge thanks for providing the links to the library, sketch, and necessary materials. Likely going to take on your Tachometer project next. Thank you again for sharing.

@giovanitestoni5160 5 лет назад

I bought your file and mounted my button box, but there is a conflict of buttons. How to solve ?

@Jiepers 3 года назад

Re do soldering

@ItIsYourBoyMe 3 года назад

If you haven't solved it already, what do you mean by a conflict of buttons? Maybe I can help.

@wagneralves5915 3 года назад

@@ItIsYourBoyMe I'm also having conflicts when I press more than one button at the same time, for example, if I activate switch 1, and press any button, a third signal is sent ...

@ItIsYourBoyMe 3 года назад

@@wagneralves5915 I haven't actually built this box myself, but when I was watching this video, this was an issue that is unavoidable with this design. For example (I haven't rewatched the video, so might not be 100 % in line with the video), let's say a button is pressed such that current flows between row 1 and column 1 of the wiring as shown in the wiring diagram in the video. If all other buttons/switches are deactivated then everything is fine. However, let's now say that you push a button which is wired to row 2 column 2. Then the entire column 2 is activated, and moreover, if at the same time you push the first button (row 1, col 1) then row 1 col 2 and row 2 col 1 are also activated. This is unavoidable unfortunately, as long as you have more buttons/switches than inputs to the arduino. A solution might be to rewire in a more appropriate way (and update the arduino code) or to disengage some buttons/switches.

@Jxsey 3 года назад

@@ItIsYourBoyMe so for example, if i wanted a jake brake on/off toggle switch but needed to increase/decrease intensity with push buttons, theyd need to be wired into different groups?

@theanimationlake3661 4 года назад

I like watching people do electronics

@trinitronaphthalene 4 года назад

It’s like he wants us to build this box Oh wait

@YianniKVideography 6 лет назад

First of i like that you use the same board for all your projects. It's nice that you share with us the arduino code, so we can try them ourselves. Also, i am more amazed that i can use a lot of spare parts to get involved with the arduino world and especially put that effort to improve my sim rig.

@CraigMansfield 5 лет назад

Looks fantastic! It would be great for VR flight simulators (or just 2D flight simulators)

@Skodalicious 10 месяцев назад

Actually the problem with VR is you can't see what you're doing with your hands, so buttons and switches are a huge pain. I find myself counting along rows of switches to find the right ones for example

@mikesapp3241 5 месяцев назад

This is how you do an instructional video about wiring. We don’t need to see your face and bedroom and all the cats, or tell the life story and comment on the news. Just do the damn thing like this !

@jblackops99 7 лет назад

I think I might make one for my actual vehicle for lights and such

@MrBlueJK4 5 лет назад

Really cool of you to share your knowledge of electronics with us plebs

@wil61 5 лет назад

Very fun project. Works like a charm. Thanks for sharing and getting us interested in Arduino ;)

@leontretner6377 2 года назад

As allways wounderfull video.👍 But it would be better if u could add an documentation to the sketch so it´s easyer to understand and expand it.

@tobywenman4769 4 года назад

Don't you need diodes in series with the switches to prevent masking/ghosting?

@JonBck 4 года назад

This is a really good overview! It's the pedagogical video I will be sending people to when I get the question, as I don't dive into detailed descriptions myself when I do wiring. Good inspiration for all of the sim-pit people!

@matthiasmichiels8921 7 лет назад

Again like al your video's very nice tutorial. Don't stop doing this !

@jorge_781 4 года назад

Great video, it will convince a lot of people that buy one is much better and quicker

@Mark_T_902 2 года назад

Great video for people who know a bit of what they are doing but for someone like myself who needs just a bit more information I’d highly recommend spending the couple dollars for the pdf guide. It answered all the questions I had and erased any doubt about being able to complete the project with a working unit. Cheers 🍻 you earned it amstudio.

@amstudioprojects 2 года назад

Thanks 👍

@jexom 6 лет назад

Ok. Now I need this for Elite Dangerous.

@CMDR.Gonzo.von.Richthofen 5 лет назад

That's why I'm here, CMDR o7

@Doile911 5 лет назад

I made it for Elite! IF you want my opinion keep on reeding: it's a good idea to add leds to the front face of the pad as well (for flight assist, or silent running) to toggle, if they are on or off.

@CMDR.Gonzo.von.Richthofen 5 лет назад

@@Doile911 I though Elite couldn't output game data to another device, such as an indicator light?

@FilaYeah 5 лет назад

I think you can use indicator LEDs as if the switches were just for the LEDs

@harpoon_bakery162 5 лет назад

doubt it would be a good fit

@sinkorswim-westernaustralia 10 месяцев назад

This has been in my library, waiting for me to get the soldering skills on that tiny Arduino, for a very, long, time. Almost there….

@PeterM0911 7 лет назад

You are awesome!

@petrolheadjohn 4 года назад

Can’t help but admire your craftsmanship and how easy you make it look it can be. I’ve tried soldering a few times and it’s not as easy as you make it look. It does make you wanna give it go but will prob just chicken out and get a pre built one, I want it to look nice on the rig. Great video tho, I learned a lot,

@longnamedude3947 7 лет назад

Love your videos, keep them up

@amstudioprojects 7 лет назад

Thanks mate!

@Elitesniper257 7 лет назад

The way he showed the buttons and encoders being set up is about the same way you can get led matrixes and some small led cubes. If you want to go a step further, use an Arduino Pro Mini(the micro and mini are different), and LCD, the button box, and a few other components to use it on a real car. Takes a bit of time but its fun nonetheless.

@111Sjaan 5 лет назад

thank you so much for all your amazing teaching videos!!

@DiscoLucas Год назад

This is why I don't understand why some people will spend $200+ on a simple button box. Sure it's easier when you don't have to spend the time, but still, the cost difference between doing it yourself is huge.

@alfarosiarsita 4 года назад

All DIY for sim racing is incomplete without carbon patern vinyl

@mikaelhansen7335 5 лет назад

Just wanted to say Thanks starting to get my project done took awhile to modify the code tho to work with switches and there is some modification left to do but where I am at this stage atleast lets me solder everything without having to worry:-P

@madbluegaming3328 7 лет назад

Another helpful video :)

@amstudioprojects 7 лет назад

Enjoy!

@pissot5970 4 года назад

@@amstudioprojects how can i get codes?

@user-spv96x3x7i.4kc 4 года назад

best channel ever on youtube!!!!

@GarfieldPvP 7 лет назад

love your vids

@amstudioprojects 7 лет назад

Thanks

@MamasFunkyMonkey 4 года назад

Awesome video

@amstudioprojects 4 года назад

Thanks!

@federicoromano9689 6 лет назад

Nice video but I had a question, as I'm not an expert in electronics I did not understand the connection of 3 way toggle

@AsilarWindsailor 4 года назад

Think of the 3-way toggle as two separate switches where only one side or the other can be ON. The center tap is the power in and the two outer taps are the outputs that complete the circuit when the switch is toggled to that side

@diegofernandesp 2 года назад

Thank you. My first DIY button box works like a charm

@wahyuariaji576 Год назад

i've already installed a library but i failed to upload it, it says cannot found kepad.h, where i can found the kepad library? the download link is only give me a joystick library,, please help..

@victorxvalera Год назад

same here

@woutdezeeuw1604 2 года назад

That looks very polished, well done!

@brasileiropower 7 лет назад

This is simply unbelievable. Congratulations mate.

@ALA34388 4 года назад

I wish I could do this 😂

@366gaming Год назад

Thank you for your informative videos. Can I add an ignition key to the box? how can I connect it?

@aderitofilipedepina3103 7 лет назад

I would like to see you making a 3 axis sit motion simulator. Maybe using oculus or vivre as the screen. for head tracking.

@PlasmaPod 7 лет назад

+1 (for next project)

@swekiller98 7 лет назад

or just buy a trackir

@PlasmaPod 7 лет назад

you need 3 axis motion for a racing seat now that would be an epic build

@kyoz1984 9 месяцев назад

I know this is a old video but WOW! such a simple build. this proves the cost of button boxes is complete bull shit lol

@MrFrosty888 4 года назад

I have tried so many times just can’t get it to work lol

@alexander10000000 6 лет назад

Thanks for the video. That helped a lot with my personal button box I'm building.

@TormentorMB 5 лет назад

Where does the "SPARCO" sticker comes from?

@Federation42movies 5 лет назад

G'day, @amstudio ... I'm wondering the same. The only thing that wasn't explained was the sticker. Was it bought as is, or do you have a vinyl printer/cutter thingo? Being able to print labels for the switches would be the cherry on top!

@-book 4 года назад

@@Federation42movies Australians like

@wargasmm 7 лет назад

You Are Great Man!!!! I made a new button box because of you! Thank you!!!

@amstudioprojects 7 лет назад

Awesome! Enjoy.

@syllenchoo 6 лет назад

can u help me i have a problem mine is uploaded and te buttons are wired well but the arduino doesnt show up on assetto corsa and i dont now how to fix that cause the arduino is detected as a keyboard so can u please help me with that mate can u message me on Mail:moraligamesramzi@gmail.com

@Sombre____ 2 года назад

Yeah ... it's how we save money from an expensive simulator board.

@Avenga76 7 лет назад

You could show people how to design and 3D print a button box using your new 3D printer.

@topituulensuu4010 7 лет назад

3D printing boxes is kind a meh unless you need something very specific. Hobby/project boxes come in many sizes and they are more durable and unless you already own a 3D printer way cheaper.

@TheLukemcdaniel 2 года назад

It may add a bit of extra cost, but imho it would be better to add a port to the back of the box to plug the usb cable into.

@stqrscape 5 лет назад

lol noob here I want to know if it matters if I use a matrix in a way that the switches and buttons are in the same line, like 3 switches and 2 buttons on the same line. answer plis

@gabrielgriffon9334 4 года назад

Yes buttons and switch are functionamy identical. It's juste that switches stay in plave

@cha_enthusiast 4 года назад

As long as each component has a unique position in the matrix (i.e. no other component is connected to the same 2 pins on the controller as it) then all should be fine. Even the momentary push on the rotary encoder (bottom row knobs on this build) can be fit into a matrix. (The rotation input cannot, however.)

@benGman69 6 лет назад

Just completing mine now, thanks mate

@samcornelissen1169 6 лет назад

I need the script for the arduino

@andreasotto1977 6 лет назад

github.com/AM-STUDIO/32-FUNCTION-BUTTON-BOX

@darkcypher111 6 лет назад

It's in the description

@mibo8701 3 года назад

Damn, I realize I'm late to the party here, but, just wanted to say 'well done, sir!' That's a mighty fine build you've,..... mmm...built.. Wanted to add that instead of tying a knot in your usb cable, a good solution to preventing the cable from coming out would be adding a clip on ferrite bead to the wire. While a usb cable is generally not pushing enough current to create a problem due to the unintentional {mini}inductor we've created (aka the knot) we do know that sim gear (especially our beloved giant motor wheel bases) has a history of creating nasty EMI and making electronics do all kinds of wonky things. So, using a ferrite bead would help in several ways, a 'cable-stop', remove inductance, and lastly, block potential EMI from our other sim gear. Sorry for the long winded msg, I'm sure you know all this but I wanted to explain for any curious passer-by. One more thing (though you probably won't see this because a. The video is years old and b. You would have had to read through me novel above, and I certainly don't blame anyone for saying "F` reading all that") the car in your background... Did you Photoshop that? Whoever did, did a fantastic job! Only reason I recognized it was is because I spent YEARS photochopping myself. Anyways, sorry again, and seriously great work bro, -Michael

@essenergrieche 6 лет назад

where to get such small sparco stickers?

@Typhlosion100 5 лет назад

g.Force eBay

@slybunda 3 года назад

if its using a matrix does that mean you can only press a limited number of buttons simultaneously or they wont register?

@wonkadewittbukater6322 7 лет назад

is there the possibility to make an complete wheel with Arduino? Cheers mate

@joshuamartin4547 6 лет назад

You very much can. I've already done it, and have just received three more Pro Micros to make more.

@SergejGrabun 6 лет назад

examples?

@vishalgaurav4411 6 лет назад

Joshua Martin Can you show us ?

@graham287 4 года назад

Genius. Easy to follow and extremely useful. Thank You

@henrymathews2556 7 лет назад

Will this work on a PS4, with PCars?

@barrymcaully 6 лет назад

Henry Mathews I’m also interested to see if this works with a PS4 in Project Cars 2.

@slimsign 6 лет назад

Henry Mathews I have made box. But it is not working on a ps4 yet.

@Bigbooti 6 лет назад

Did any of you guys fixed this problem on PS4?

@slimsign 6 лет назад

Yes i got is working on the PS4

@Bigbooti 6 лет назад

How did you do it?

@SticksAandstonesBozo 9 месяцев назад

I built a gorgeous box with ignition , toggles , buttons , you name it. But I used a zero delay USB because I just didn’t know about arduino. Little did I know zero delay is straight garbage unless your playing one sim and want to fight it for weeks to get it working. So I just gotta learn how to use the arduino mini I just bought. 🤦‍♂️

@SticksAandstonesBozo 9 месяцев назад

Ummm ok. But you didn’t explain why you wire it that way. I mean not even just a general explanation would be all I need. I can’t just fly blind based off zero info

@serkankazak5471 7 лет назад

next build should be a pop filter for the mic

@pleaseclickunsubscribe 6 лет назад

Just buy one for ten bucks.

@sonmustang 6 лет назад

Hahaha! I got what you meant. You're funny bro! I agree. Are you a sound engineer? I am. :)))

@pleaseclickunsubscribe 6 лет назад

KaPex Those ones break in 10 seconds. I would try to get one that is at least $10, if not $15+

@Neoproxy_ 6 лет назад

@@kapex6334 But he said that because there's a lot of pops in this video not because he actually want one

@bf_pierce6418 2 года назад

so this sketch file seems to not work? i have added both keypad and joystick and continue to not be able to load to the pro micro

@gryd3461 6 лет назад

i know this is old, but i cant really do any of this, so i will pay you for this if you can send it to me. please

@olleborner4604 6 лет назад

You can buy buttonboxes off of ebay

@theothergtgeek9407 6 лет назад

Olle börner they are extremely expensive though

@harshsingh5447 6 лет назад

i can make for you cheap

@datatech2001 6 лет назад

thank God. Finally. I've been looking for a good video on this. Best one out there. I have a inland mega 2560 and suppossedly you can wire 256 switches like this. I had a diagram but it was vague and blurry. This helps explain it all. Awesome

@amstudioprojects 5 лет назад

Easy to follow 18 page Guide with setup instructions here: bit.ly/2HeizNj

@kamilcosiek5156 5 лет назад

Which program do you use for design your buttonbox? 1:02

@S16xxl 5 лет назад

A few month later I do it for a ps4 ( project car can use a lot of buttons on ps4) but the it doesn’t work( not reconize by the ps4), do you have an idea? I think the problem is the skech of the atmega because is like keypad and not keyboard, what do you think about this ? Great job and and realy big thanks for your diy and also Sorry for my poor english.

@markrogers7304 5 лет назад

The link you have for The 18-page Build Guide is dead. You have a link for it?

@dabzz87 5 лет назад

Would it be possible to include a joystick or two in this build?

@ColinCarnevaleCarneyteen1 5 лет назад

what if i don't want rotaries but more buttons, could you do a video on how to change the i.o sketch to add more buttons to this build and where to solder them on the ardino? Or can anyone help with that been trying for a few weeks now and some how just cant get it to work.

@dafoex 5 лет назад

"Solder to TX and RX" That could make reprogramming tricky if you're using those pins. Not impossible, but its something new arduino users should be aware of.