Make your own adjustable DIY Router Template ! A must have Jig !

Подписаться 83 тыс.

Просмотров 2,8 млн

50% 1

Do you have a Router?
Do you want an easy to make adjustable Template for your Router?
Let's make an adjustable DIY Router Template.
● Homepage : www.thosa.info
● Thingiverse : www.thingivers...
● Instagram : / diy_thosa
● Facebook : / diy.thosa.77
● Twitter : / diy_thosa
● my Art @ Twitter 🔞 : / _my_pencil_
● TikTok : / diy_thosa
● Tellonym : tellonym.me/thosa
● Ask.FM : ask.fm/youtube...
● Telegram : t.me/RU-vid_T...
●●● www.thosa.info ●●●
●
● send in your project ideas
● 360° Workshop Cams
● all my Machines
● FAQs
● all my Links
● About me
● Contact me (Direct Chat)
●
● ask me anything anonymous:
● www.tellonym.m...
●
● Download FREE Plans:
● www.thosa.info/
●
●●● www.thosa.info ●●●
All my Tools and Camera Equipment:
● www.amazon.de/...
● Amazon Links are Affiliate Links
● don't try this at home:
I am a do-it-yourselfer and this is a private hobby video,
by showing me how to solve special tasks! The video is not an
instructional video and is not intended to be imitated!
That's why: All information and tips without guarantee!
Everyone is responsible for his actions and is responsible
for his own mistakes! For all work, the general Observe
occupational health and safety regulations! I do not assume
any liability for damages and injuries!
● License:
Cold Funk Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons...
● Title: Make your own adjustable DIY Router Template ! A must have Jig !
diy router template, woodworking, router jig, how to, wood router,
woodworking jigs, joinery, maker, how to make, tools, routing,
tutorial, project, making, woodworking tools you must have, wood,
woodworker, amazing tools, diy woodworking, diy tool,
thosa, diy, thosa und ich, instagram, facebook, twitter,
tellonym, tellonym app, askfm, ask, me, anonym, anonymous,
anything, private, q&a, frage, antwort, q&a, lgbtq, fragen, antworten,
faq, free, plan, download, pdf, template, vorlage, selber, machen,
holzwerken, anleitung, design

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 435

@sleepymoose1 4 года назад

Great video, many thanks for taking the time to make it. I don't see any advantage in cutting the round holes and having an insert. Unless you can tell me? Surely it is better to cut a small square hole and have the bolts just tighten up against the stock then there is less play from moving parts.

@thosa 4 года назад

😳😅👍 yeah, you're right! 😅 I saw the circle cutter and my head was like: yes, great idea. 😅 ..of course it is easier and more useful to put a small rectangle in that place. 😀👍🖐

@istefk 4 года назад

its simplicity is genius.

@thosa 4 года назад

thank you 😊🖐

@ccccen 5 лет назад

#1 I love that blade guard. #2 that router, the putting to guide is very nice. I took a lint roller and put sand paper around it to sand inside circles and also took different sides of wood circles, glue them together and made one for my drill press :) All in all your project is very niceeeeeee I like it.

@williamhoward8319 6 лет назад

did you build your table saw ? when i first started wood working i mounted my only tool at that time to a piece of ply wood a 7 1/4 saw limits what you can do now i prety much have a full wood shop in my garage and my problem is how to move them arround so casters it will b the only thing i own that is mobile is my table saw

@thosa 6 лет назад

yes. its a simle hand circle saw mounted under the table. but now Im happy to have a good new table saw with a splitting wedge. The self made one was to risky.

@williamhoward8319 6 лет назад

i know what you mean what scares me is these work place or guess you would call them portable table saw is the throat plate being so flimsey and large i own a cheap porter cable 10 inch it is sufficient for what i do have 6 inch jointer 14 inch band saw a 12 in thickness plainer and bunch of other goodies looking at a new router just need to talk the wife out of the money

@Friendsincubatorelectric 4 года назад

nice

@thosa 4 года назад

thank you 😊🖐

@underpantswedgy 5 лет назад

Liked!

@asd67lkj 2 года назад

Easy to follow and understand. Thank you.

@bradleytuckwell4854 3 года назад

That is the best I’ve seen and I have seen a lot. And best of all I can make it for under $10 so o thank you for sharing.

@CurtisDensmore1 5 лет назад

You should show the finished product at the beginning. It makes the entire video much more engaging.

@thosa 5 лет назад

Yes, that's right. That only affects the oldest videos. The newer ones are with the finished product at the beginning. 😀🖐

@mickleblade 6 лет назад

Superb. You could have made the T slot routing easier by running it over the tablesaw first

@thosa 6 лет назад

thank you 😊 ... yes thats right 👌 or use a normal router bit to save the T-router bit.. I learned that afterwards. 😯

@keithdavison5578 8 месяцев назад

Thanks alot that's great and looks easy to make and use. I'll get on and make one as soon as I get back home many thanks Keith ❤🎉 👍👏👏👏

@ВалентинаИвановна-г5о 2 года назад

Мне, очень понравилась тема видео.. Один вопрос-вы сами сделали свой рабочий стол??

@thosa 2 года назад

да, но я им больше не пользуюсь. Это было слишком опасно. 😀🖐

@richardbarnum2898 3 года назад

After several failed attempts to make a productive adjustable jig, finally did a RU-vid search and found this. This simple engineering of a simple jig can be quite elusive, yet you sir did an outstanding job on the creation. I had really over complicated my process, now tomorrow I will be making this and I am sure will save me much time on the inlay router cuts I make on my signs. Thanks for sharing.

@thosa 3 года назад

thank you 😀🖐

@macdaddy5802 6 лет назад

Learn something every day 👍

@williamhoward8319 6 лет назад

hey i apologize for spelling your country wrong it is hard for me a arkansas hill billy many times to spell besides i am 78 years old and forget a lot so i am apologising for my stupidity i love to watch your shows to know what people all over the world do and how thank you so much

@thosa 6 лет назад

hey.. all fine... you did nothing wrong ... 😀 thanks for watching and have fun with my videos 😀

@СергейКазанцев-ж7з 2 года назад

Очень своевременное видео.Делаю доски"для завтрака"--приходится каждый раз делать новый шаблон.А тут всё просто.Очень здраво и вовремя.

@thosa 2 года назад

😊👍

5 лет назад

Hola... Otro trabajo excelente... Felizicidades... Por favor, podríais decirme la medida de la fresa de formato "T" que has utilizado??? Gracias... Saludos.

@thosa 5 лет назад

vielen Dank 😀🖐 Ich habe diesen benutzt: Festool 491035 T-Nutfräser HW S8 D10,5/NL13: amzn.to/2glzBeD 😀🖐

5 лет назад

@@thosa Hola... Muchas gracias por la información... Te estoy muy agradecido... Soy un Fiel seguidor tuyo y te doy las gracias por compartir tus conocimientos, tus vídeos son geniales... Un fuerte abrazo... 🤜🤛

@thosa 5 лет назад

@Fernando Gutiérrez Sánchez thank you so much 😊👍 Have fun with my Videos ... I'm getting better and better in filming 😊👍🖐

@1959WoodWorkingHobby 2 года назад

Congratulations on the beautiful work!

@thosa 2 года назад

thank you 😀🖐

@adriancapilna3899 Год назад

Great idea! Easy to make and very useful. Thanks for sharing!

@erickelley1937 5 лет назад

I really like this! You kept it very simple, but very versatile. And as you said (sort of), to another commenter, who gives a rat's ass if there is a "better" patented version. It won't do anything that yours won't do!! Good job!!!

@thosa 5 лет назад

thank you so much 😀🖐 it is even more versatile than I thought at the beginning 😅👍instagram.com/p/BqCrgoXAWlw/

@gregh3947 5 лет назад

And the better patented version is about $220. I just looked.

@thosa 5 лет назад

my version is about 1€ 😅 and makes it the same way. 😅😊🖐

@Duyunovmotors 4 года назад

great respect to people who know how to work with their hands

@thosa 4 года назад

thank you 😀🖐

@funwithavani8665 2 года назад

Cool

@paulwhite9872 2 года назад

pretty new to woodwork but that looks like a musthave awesome jig ty 4 sharing

@thosa 2 года назад

😊👍

@gzfrhbhsolution6620 5 лет назад

Thanks to your video (your hard work) . . . . I made one too ! While it is NOT a perfect solution for some large mortises I was cutting, it was still a DRAMATIC improvement over what I had been doing. MUCH appreciated! THANKS !

@thosa 5 лет назад

perfect 👌😊👍 thanks a lot 😊🖐

@TBBuilds 3 года назад

Cool idea! Looking to make something similar myself. Have you ever thought about making something so you could do angles too?

@thosa 3 года назад

thank you 😀🖐 no, not yet. 🤔😀🖐

@abner20bushi 4 года назад

Got my subscription. Excellent jig.

@thosa 4 года назад

thank you 😀🖐 Pls check my newer videos 😊 I've got a lot more (better) ones 😅🙈

@nicksshitbro 3 года назад

Try cam locks instead. You can use an Allen wrench to unlock it in half of a turn.

@nicksshitbro 3 года назад

Very good idea though! My router does not have plunge capability but I've been thinking of ordering a plunge base for it. Hmm.

@MikeFaneros 6 лет назад

Great idea! I may have to do this... Do you think cam bolts would come loose too easy? If not, then you'd just need a simple screw driver to adjust. Or for more ease (so you don't have to hunt for the wrench or screwdriver), maybe a quick release bolt like you'd find on a bike.

@thosa 6 лет назад

cam bolds would be a nice try... but I don't know if they're strong enough... if you're rebuilding this, don't put screw heads in the slot. They lose their grip after a while and start to turn. a sliding block would be a better solution.

@inebex63 6 лет назад

Espetacular. Wonderful Beni from brazil

@pietverdult3058 5 лет назад

Ik vind het heel mooi en leuk wat ze maken.goede producten.

@thosa 5 лет назад

vielen Dank 😊🖐

@williamhoward8319 6 лет назад

that is a thick hunk of mdf how thick i can get 3/4 then i if i want thicker i will need to laminate 2 or more together

@williamhoward8319 6 лет назад

i talk back and forth to a young russian wood worker it is wonderful to know that we do so muc together

@ashokmoghe8035 2 года назад

Like it - one of the most elegant design. I am going to build one. Also subscribed to your channel.

@thosa 2 года назад

thanks alot 😀🖐 and have fun on my channel 😀🖐

@davidsneddon2242 2 года назад

Oh so simple and what a brilliant idea. Like others I have watched a few and this by far the simplest and most effective.

@thosa 2 года назад

💪😊👍

@Penza-2023 4 года назад

Отличный шаблон. Доберусь до мастерской после коронавируса - сделаю! Спасибо автору за идею👍!

@thosa 4 года назад

vielen Dank 😀🖐

@sumaidifeston8182 3 года назад

Hi sir, sorry for asking you this kind of question I want to know.. my question is,, I saw your post by the social media and I appreciated of it but why were you doing or showing it us very faster...? Please can you try to show us very slowly...?

@thosa 3 года назад

thank you 😀🖐 It is always difficult to show all the important steps without making the video an hour long. Then people no longer watch the entire video, but start jumping. Then they skip important parts of the video and don't understand it and then ask me. That's why I do some parts faster. In the newer videos I have already dealt with this and tried to show certain parts better and to make text insertions. 😀🖐

@Billlupton 5 лет назад

great video, very simple to make and no damned musak, that kind of ply is it plastic treated,dos it have a name?

@thosa 5 лет назад

Thank you 😀🖐 I know it as Phenolic Coated Plywood. Its often used as Ground Plates for Car Trailers. 😀🖐

@Billlupton 5 лет назад

thanks I know the stuff damned expensive

@thosa 5 лет назад

yes, unfortunately. 😥 I regularly go to the Hardware Store. They sell Wood Scraps and Waste at a Fraction of the Original Price. 🤓 Most of the Time the Leftovers are big enough for my small Projects. Hope your Store offer this Option as well. Just ask for it. 😀🖐

@spicyhot1695 4 года назад

Excellent build my friend! Thanks for sharing

@thosa 4 года назад

thank you 😊🖐

@MaddMaxxWoodWorks 2 года назад

Very good idea. I still use the measuring ruler I won on your channel. Love your videos.

@thosa 2 года назад

😊👍 ❤

@markkaufmann8422 3 года назад

What size T slot bit did you use for the router, and what size bolts?? great video!

@thosa 3 года назад

thank you 🙂🖐 I've used M6 Bolts with 10mm Hex Head.. so a 10mm T-Slot cutter from Festool. 😀👍

@timthomas9105 5 лет назад

Have a plastic one very similar but can also change angles. If I added more pieces it could do any multiple of sided. The only limitation is with more sides the larger it has to be.

@thosa 5 лет назад

Sounds nice.😀👍 Do you have a link to that? I wouldn't call that limitation. Sometimes there's no other Way. 😀🖐

@timthomas9105 4 года назад

@@thosa you can do the same thing by rounding over one end.

@murrayglen651 2 года назад

Like it.just what I've been looking for. thanks for sharing.

@thosa 2 года назад

😊👍

@noi5emaker 3 года назад

I loved watching and listening to this! Brilliant idea too.When I have a spare 6:47 I'll make one.

@thosa 3 года назад

😊👍

@dj0men666 6 лет назад

Nice video - subbed - i have been trying to think of a way to create/use something like this to cutout an insert with rounded corners (and keep both pieces) for example a cabinet door, but the internal rounded corner is the tricky part as with this jig you just get the square inset slightly. I wondered about creating some corner inserts that fasten with t screws but not sure if the jig would be accurate enough or strong enough. I have also seen a jig where you fasten the router to a point and follow the radius. This was the best idea yet but could be tricky if in the middle of the workpiece unless you made a jig for everyone you cut. Any ideas?

@thosa 6 лет назад

good question... To cutout an insert with rounded corners would be a challenge if you want this to be done in one step. I would do this in several steps with different templates. For example a template (quarter circle) with some inches straight for a better alignment. Cutout all corners and use this template or some straight pieces for the lines in between. by the way... I wouldn't make a door with a router out of one piece. The gap between door and front would be way too large. If I want this out of one solid part, I would try this with a jigsaw and make the starting cut with a multi-function tool. Please mail me if you found a better solution :-)

@FIGUEIRINHA 6 лет назад

easy to do using one corner chisel

@inebex63 6 лет назад

Very smart ideia ,not every ! Sorry . Internet is very good to be the world close

@thosa 6 лет назад

😂 I had read 'very'

@karlw.9006 6 лет назад

Hallo Thosa, danke für die hilfreichen Videos. Was mich aber brennend interessiert ist dein Säge/Frästisch. Genauer gesagt, die Mechanik von dem Ein- und Ausschwenken der Geräte. Hast du darüber auch ein Video, wie das gemacht ist?

@thosa 6 лет назад

ne. die Kreissäge ist eine einfache Handkreissäge, welche unter den Tisch geschraubt ist. Die drück ich von Hand hoch. Die Fräse genau so. Nur dass ich die Fräse wegen der genaueren Frästiefeneinstellung mit einem Wagenheber hoch krubel. Alles kein großes Hexenwerk und auch nicht wirklich zur Nachahmung empfohlen... zb habe ich dadurch keinen Spaltkeil an der TKS... viele Grüße

@restholzjunkie 6 лет назад

Welche Maße hat der Fräser? Ich habe einen 12,7 mm D... Nach dem Video und dem Boxhalter muss ich mir Deine bisherigen anderen Videos noch reinziehen...

@thosa 6 лет назад

hi. der T-Nut-Fräser ist in der Videobeschreibung verlinkt. Viel Spaß beim Weiter gucken 😊🙋‍♂️

@Woodworks-Switzerland 6 лет назад

aaarg, jetzt muss ich mir doch noch ein t-nut fräser holen. 😀 danke für's zeigen!

@juancarlosgil5428 6 лет назад

Me ha gustado con la sencillez cómo lo has hecho y lo bien que te ha quedado, un saludo.

@thosa 6 лет назад

thank you

@inebex63 6 лет назад

Every smart ideia . Congratulations. Beni from Brazil

@thosa 6 лет назад

thank you 😁 thosa from germany 😉

@williamhoward8319 6 лет назад

you are in europe perhaps around germany?

@thosa 6 лет назад

yes. Im in nothern germany. 😊

@gundur7193 2 года назад

5.nci dakikada sıkma hiç pratik değil. Elle sıkılmalı. Anahtarla değil

@peckerwood780 5 лет назад

There are much simpler ways to do what you just did been making that kind of template just saying

@thosa 5 лет назад

Very possible. 😀🖐 My Methods are certainly not the best Solutions. They are only my Solutions. 🙃 Feel free to make it better and mail me your Solution. I love to learn from the Community. 😀👍

@peckerwood780 5 лет назад

Where do I see your email to send stuff? I have a jig I came up with that's super simple, accurate fast and easy to use I'd definitely share.

@mvpcardinal4668 4 года назад

@@peckerwood780 hey man . Seeing if you could send me a video on your jig. Thanks.

@haenselundgretel654 5 лет назад

Extremely good idea with the half circles!

@thosa 5 лет назад

thank you 😀🖐

@diegohurtadobedoya4168 3 года назад

Súper. Buena guía Tienes planos y donde los puedo ver? Saludos desde Medellín Colombia

@thosa 3 года назад

vielen Dank 😀🖐 Zu diesem Video gibt es keinen Plan. Meine Pläne findest du hier: www.thosa.info/download_free_plans_en/ 😀🖐

@mazinholindomarlopes763 6 лет назад

Good afternoon. Do you have any video on how to make this paralele guide on your bench?

@thosa 6 лет назад

no sorry. this is only an alu system profile. the whole table was made with this profiles. google for "ITEM profile" and you will find them. 😊 but I dont suggest building a fence with this. you have to measure and screw both sides to got a precise cut. a biesemeyer fence out of plywood would be a way better solution ... 👌

@mazinholindomarlopes763 6 лет назад

Ok .... Thank you so much !!!

@eddiedoors1 3 года назад

Great Video !!! Can I find a Distance Sleeve for the simpler Makita Router, the one that you use with one hand?

@thosa 3 года назад

thank you 😀🖐 I'm not sure if there are spacer sleeves for the small router. You can, however, run the entire router along the inner edge. You only have to make sure that you always drive along the frame with the same side of the router. (only if the base plate is not a perfect circle) 🙃👍

@eddiedoors1 3 года назад

@@thosa thank you very much! Cheers from Brazil!

@donquixote1138 3 года назад

hey nice video the plans for this are not listed on the site in description

@thosa 3 года назад

thx 🙂🖐 there is no plan for this video. Only videos with the "free plan" badge in thumbnail have plans. 🙂🖐

@ИванБогглад 3 года назад

Офигенно!!! Пошел покупать фрезер и штангенциркуль)))

@thosa 3 года назад

😊👍

@digoulm 6 лет назад

Das System werde ich mir nachbauen, ist gut nachvollziehbar dargestellt.

@thosa 6 лет назад

Die Sechskantschrauben haben sich jedoch als nicht die beste Wahl erwiesen.. In Holz drehen die schnell über. Ein schmaler, länglicher Alustreifen mit einer Senkkopfschraube ist besser geeignet.

@digoulm 6 лет назад

Der Alustreifen gleitet dann wohl in der Nut? Die Senkkopfschraube verstehe ich ja, nur wie willst Du die fixieren? Einkleben? Ich denke da eher an passende Nutsteine, die Schraube müsste dann anders herum angebracht werden, was aber eine zusätzliche Aussparung zum Einsetzen der Schraube bedingt.

@thosa 6 лет назад

Ja, der Alustreifen quasi als Nut. Loch bohren, Gewinde rein, Senken, Senkkopfschraube rein. Gleiches System habe ich an meinem Kreisschneider für die Bandsäge gemacht. In der Mitte ist eine versenkte Aluschiene. Vorne am Drehpunkt ist eine Senkkopfschraube bündig abschließend in der Aluschiene.

@luciancaliman1617 6 лет назад

thosa eher ein Stahlstreifen der genau ( Länge X Breite des Nutquerschnitts) so breit ist, wie das Brett das stumpf anliegt. Darin ein passendes Gewinde geschnitten, und dann die Senkkopfschraube einkleben. So hält das gut.zum Schluss die Schlitze noch mit Wachs einreiben.

@papamumbi9238 6 лет назад

Gewindestange in Vierkantmutter oder Nutenstein einkleben oder Flachrundschraube am Kopf nachfeilen.

@jamshedamonov9813 4 года назад

Very Nice! I have a quastion. What kind (brand) of router bits do you use in your project? Thank you.

@thosa 4 года назад

thank you 😀🖐 I've used this one: amzn.to/2glzBeD 😀🖐

@morty_mcfly 3 года назад

That's clever ! Thank you for sharing !

@thosa 3 года назад

thank you 😀🖐

@morty_mcfly 3 года назад

@@thosa I made this jig last weekend ! It's great !

@thosa 3 года назад

cool 🤗🙈 yes, its very usefull 💪🙃👍

@NoNAME-p4c4q 5 лет назад

Спасибо за идею

@thosa 5 лет назад

😀👍

@billwebber5208 3 года назад

Really good video thanks

@thosa 3 года назад

😊👍

@Barnagh1 6 лет назад

Great jig, some simple but very clever ideas. Would you consider taking out some of the t-slot with your table saw, to lighten the loading on the router slot cutter?

@thosa 6 лет назад

Yeah, that's a good idea. Thank you

@Barnagh1 6 лет назад

thosa you could also mill stub tenons on the ends of each piece, to engage with the slots, it would keep the jig very flat.

@Barnagh1 6 лет назад

thosa and use longer bolts with correspondingly deeper bores to hold them, then the nuts, washers and spacers won’t work free and get lost?

@thosa 6 лет назад

nothing gets lost. The nuts only need 2 turns to push the bolt out of the slot. An optimization would be to use a longer sliding block instead of the bolts. The wood doesn't prevent the bolts from turning for ever.

@myopinion6328 6 лет назад

Now, wasn't that just clever. Great job

@thosa 6 лет назад

not my invention. but thank you 😊

@agrafes6 4 года назад

I like what you do but, your table saw guard is only useful when you’re not sawing wood. I take its a circular saw, and you’ve screwed it to a bit of wood?

@thosa 4 года назад

Thank you 😀🖐 yes.. But this Video is over two Years old. A long Time ago I have stopped using this Saw due to safety Reasons. Check out my new Videos. Especially the Jigs for the Table Saw. Now I have a new, professional, safe Saw. 😀🖐

@marcb8874 2 года назад

merci ,super idée

@danceanddreams1 6 лет назад

superidee! wer war noch gleich der erste der das vor 5 jahren gebaut hat?

@thosa 6 лет назад

wer der Erste war, weiß ich nicht ... ich habs bei Toolify gesehen 😁 👍

@peterschnettler7722 6 лет назад

super gemacht. Das muss ich auch versuchen. Danke

@thosa 6 лет назад

nimm aber längliche Platten in die Nut. Die Schraubenköpfe drehen mit der Zeit durch und halten nicht mehr im Holz.

@peterschnettler7722 6 лет назад

Ja Danke für dem Hinweis. Mache ich! Schönes Wochenende!

@syproful 4 года назад

What brand is router and saw table underneath ? I really need a saw table, but i’m not sure if i need to spend the cash on a good sled system or if i have to make it myself.

@thosa 4 года назад

These are both the cheapest machines you could find. The hand circular saw cost 40€, the milling machine 19€. But I strongly advise against building such a table saw yourself. Important safety devices such as splitting wedges are missing. A cheap milling machine can be screwed under the table. This has worked well for me for 3 years now. 🙂🖐

@raysmith1992 5 лет назад

Excellent video and project, thank you for your videos, they are very good 👍😀

@thosa 5 лет назад

thank you 😁🖐

@ghabcdef 3 года назад

Awesome idea and great execution! How precise is this in practice?

@thosa 3 года назад

thank you 😀🖐 as precise as the preparation (setup for routing) 😉

@RixtronixLAB 3 года назад

Nice video, thanks :)

@thosa 3 года назад

thank you 😀🖐

@ProDMiner 4 года назад

Hey how do those t rack slots hold up on that type of plywood any good? I am making this wild table sled and would like some feed back

@thosa 4 года назад

hey 🙂🖐 that's obviously not made for eternity... of course there are also points that can be solved better. for example, the hexagonal bolts begin to overtighten in some places... Welding a threaded rod to a flat bar instead would have been the better solution. But you only know that afterwards 😅👍

@ProDMiner 4 года назад

thosa oh ok that makes sense I’ll just use it on hardwood then. Thank you very much :)

@thosa 4 года назад

🙂👍

@marcoheinrich1417 3 года назад

Sehr sehr schönes Projekt,welche Stärke hat die Siebdruckplatte?

@thosa 3 года назад

vielen Dank 😀🖐 18mm müsste das gewesen sein.

@williamhoward8319 6 лет назад

what size bolt i use 5/16 toilet bolts on my jigs and same with bolts

@thosa 6 лет назад

I use M6 bolts.

@williamhoward8319 6 лет назад

metric all my tools are sae i forget the fancy word for them

@samia8380 6 лет назад

excellent idea. .. i like it👍

@mikedavis109 4 года назад

Good evening, just visited your site. Wondering if you still have these plans available?

@thosa 4 года назад

Hi. I had no plan for this. Videos with a plan are marked with a "free plan" in the thumbnail. 😀🖐

@casperscuts2627 4 года назад

Nice project, did you think about using wing nut rather then hex nuts? It might save having to use a wrench.

@thosa 4 года назад

thank you 😀🖐 the wood was to small for a Wing nut and the Hole to small to get in with at least 2 Fingers to turn the wing nut... but the Idea is good... but all have to be larger for that... 😀👍

@KaterKarloMawMaw 4 года назад

I wish I would have half the amount of tools you have T_T

@thosa 4 года назад

I didn't have all the tools either when I started. 🙈

@umengenheironointerior629 5 лет назад

Very good! Pratice...

@thosa 5 лет назад

thank you 😊🖐

@Strenoga 3 года назад

Супер, просто и функционально

@206Seaman 4 года назад

Very nice, I like how you can use this for different sized cut outs. A question, what if you made the openings for the nuts bigger and rectangular and used wing nuts? This would eliminate the need for a wrench. Thanks for sharing!

@thosa 4 года назад

thank you 😀🖐 yes, that would be an option. But then much thicker material would have to be used and the useful depth would be much smaller. 🤔😀🖐

@bobd. 4 года назад

Did you consider adding a stub tenon to the end that would ride in the T-slot and keep the pieces flat.

@thosa 4 года назад

Yes, indeed, but I'm haven't done that yet. But very good idea. thank you very much. 😀👍🖐

@myfake8512 6 лет назад

Super Jig 😃👍🏻

@oldal05 5 лет назад

Excellent idea and great video.

@thosa 5 лет назад

thank you 😀🖐 ... but.. it's one of my first Videos... I've got tons more and way better Videos 😀👍

@dasistholz5809 6 лет назад

😎👍

@PauloHirth 3 года назад

o MELHOR PROJETO JIG!

@thosa 3 года назад

😊👍

@shaase1120 6 лет назад

sehr sehr sehr geil. Hammer.

@fussmatte392 4 года назад

Wie breit hast du die leisten gemacht? Würde auf 8 oder 9 cm breit tippen? Material dicke 19mm?

@thosa 4 года назад

ja so ungefähr. So ganz genau kann ich dir das momentan nicht sagen.

@AngelicOutcry 4 года назад

I love the safety guard on that saw.

@djebzwerolekar3486 5 лет назад

Вот мужмк себе и Assistent клжаал. - Молодец!

@thosa 5 лет назад

vielen Dank 😀

@AArrakis 3 года назад

Cool... do you have a drawing?

@thosa 3 года назад

thank you 😀🖐 No I don't have a drawing for that. Exact measurements are not necessary with this construction. Just build it according to your feeling. 😀🖐

@pkk6428 4 года назад

I WENT TO YOUR WEBSITE AND CAN'T FIND THE PLANS FOR THIS JIG. PLEASE HELP. THANKS

@thosa 4 года назад

The plans are not available for every video. The videos with plan are marked with a "free plan". 🙃🖐 but you don't need a plan for a tool like this...🙃🖐

@pkk6428 4 года назад

@@thosa ok thanks

@Monfred2008 6 лет назад

Prima Lösung mit den ausgeschnittenen Teilen ! Gefällt mir .

@9646driver 4 года назад

@kawazx7783 6 лет назад

Bin erst am Wochenende auf deinen Kanal gestoßen, sehr schöne Sachen, die du entwirst und baust. Aber warum sind deine Beiträge überwiegend in englischer Sprache? Finde ich etwas schade.

@thosa 6 лет назад

dann willkommen auf meinem Kanal und viel Spaß mit den Videos.😀 Zu deiner Frage: Weil ich überwiegend englischsprachige Zuschauer habe. Deutschland macht weniger als 10% meiner Zuschauer aus, von denen die meisten Englisch können. Die anderen 90% meiner Zuschauer können jedoch kein Deutsch. 😉 Aber die meisten Videos sind doch sowieso nur mit Musik. 😉😀