Make your own ESC/Servo Tester

Подписаться 2 млн

Просмотров 148 тыс.

50% 1

$2 for 10PCBs (Not only for New Member): jlcpcb.com
DC & Brushless DC Motor + ESC video: • Electronic Basics #18:...
Make your own ESC video: • Make your own ESC || B...
Timer video: • Electronic Basics #30:...
Facebook: / greatscottlab
Twitter: / greatscottlab
Support me for more videos: www.patreon.com/GreatScott?ty=h
More project information on Instructables: www.instructables.com/id/Make...
Parts list (incomplete, see Instructables for more, affiliate links):
Aliexpress:
1x Arduino Pro Mini: s.click.aliexpress.com/e/_dVV...
1x FTDI breakout board: s.click.aliexpress.com/e/_dVM...
1x I2C 16x2 LCD: s.click.aliexpress.com/e/_dUr...
1x Locking Push Button: s.click.aliexpress.com/e/_d8o...
4x Tactile Switches: s.click.aliexpress.com/e/_dTI...
1x 10k Potentiometer: s.click.aliexpress.com/e/_dWe...
1x PCB Terminal: s.click.aliexpress.com/e/_dXn...
Ebay:
1x Arduino Pro Mini: rover.ebay.com/rover/1/711-532...
1x FTDI breakout board: rover.ebay.com/rover/1/711-532...
1x I2C 16x2 LCD: rover.ebay.com/rover/1/711-532...
1x Locking Push Button: rover.ebay.com/rover/1/711-532...
4x Tactile Switches: rover.ebay.com/rover/1/711-532...
1x 10k Potentiometer: rover.ebay.com/rover/1/711-532...
1x PCB Terminal: rover.ebay.com/rover/1/711-532...
In this small project I will show you how to build a custom ESC/Servo Tester. Along the way I will show you how to setup the timer of the ATmega328P in order to create the required control signal. At the end I will then add tactile switches, a potentiometer and an LCD to adjust the control signal easily. Let's get started!
Thanks to JLCPCB for sponsoring this video
Visit jlcpcb.com to get professional PCBs for low prices
Music:
2011 Lookalike by Bartlebeats
Ecstatic Wave, Jens Kiilstofte
machinimasound.com/music

Наука

Опубликовано:

29 дек 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 291

@bobevans5282 5 лет назад

Congrats that you almost reached to 1 million subscribers and thanks for giving us the knowledge.

@melnedgars7273 5 лет назад

I just made my first video about electronics DIY and now I understand how hard it is to make such a qualitative video as yours. Keep up the good work also in 2019 ;)

@glowingone1774 5 лет назад

Good job :)

@Johennessy 5 лет назад

best channel for new age engineers on RU-vid... thanks GreatScott

@ChristianJoyAzucenas 5 лет назад

Advance Happy New Year Scott!🎉🍺

@brandonbrand2338 5 лет назад

Great video Scott as always, I notice you hitting close to 1mil subscribers. We'll done. And all the Best for 2019!

@eumesmo-kd1tr 5 лет назад

Happy new year great scott and be ready for the million regards

@kennywalterdiolola2290 5 лет назад

1M subs on the waay... congrats man Happy New Year

@brainfornothing 5 лет назад

Thanks for sharing and Happy New Year !

@ege621 5 лет назад

You are the only reason for me to like Sundays...

@Unordung 5 лет назад

sad it comes out on a Monday in Australia..... =( Whilst its a good start to the day nothing can make Mondays good.

@alexapetri7200 5 лет назад

Great project! 1M subscribers soon! Keep it up!

@maxk3673 5 лет назад

My weekly motivation. Thanks you Great Scott

@mupschiplayz1802 5 лет назад

Dear Scott, im very thankfull for your many cool & nice videos! I (and i guess your community) are wishing you a nice new year 2019! Greetings from Germany to Germany : - ) P.S. Sorry for my bad english but you might get what i mean :D

@ventusprime 5 лет назад

happy new year Scott!!!

@matejgamingandotherstuff6484 5 лет назад

Happy New Year 2019 Scott!

@retsetman9698 5 лет назад

Great video scott!

@petrichors 5 лет назад

love you man ,, happy new year !!

@FantaBH 5 лет назад

Another great video from GreatScott , :)

@parameshpavin2708 5 лет назад

Nice video on ESC tester👌👍😘

@lsudan2670 5 лет назад

i wish u a #GREAT new year scott !! 👏👏😉😎 edit plot ! and this year stay creative aaand aaa will seee u neeext time !😎

@rajatsharma1889 5 лет назад

eagerly waiting for 1 million subscribers

@maliduudepana3323 5 лет назад

happy new year!!

@jamess1787 5 лет назад

1M here we come!

@miadmirhaj7603 3 года назад

👌. your work is perfect

@matiasramos2409 5 лет назад

Cool project

@typxxilps 5 лет назад

11.000 subscribers and you break the 1.000.000 barrier.

@SIKHGT650 5 лет назад

hi Scott , Merry Christmas ,,,, please continue diy esc

@electronic7979 5 лет назад

Nice video 👍

@americanrebel413 5 лет назад

Great video my friend thank you!

@1337PANDA 5 лет назад

what a coincidence i was the 79th viewer of both greatscott and electronoobs video

@1337PANDA 5 лет назад

@Zuck ThatGaming of cource

@Stefano91ste 5 лет назад

Great Work!

@aerodigital 5 лет назад

I just blew out a motor controller on a 3d printer, so I have all of this on my bench right now, what timing!

@zerrium 5 лет назад

Wow, almost at 1 million subs

@flutters.mp4 5 лет назад

GREAT SCOTT

@jamest.5001 5 лет назад

Diy multiple cell bms! Happy NewYear!!

@mariomichalik9015 5 лет назад

Bms diy or buy and how it works 🤔

@filipsebik6138 5 лет назад

This is the greatest project idea I've ever seen

@linuspauly2380 5 лет назад

Well all you need is his charge and security circuit with another ic for higher voltages and transistors activated by comparators so that cells get discharged if over 4.2v thats it

@junuhunuproductions 5 лет назад

Definitely!! @greatscott

@PropaneTreeFiddy 5 лет назад

I work with batteries quite often, and it depends on how complex your battery pack is, as well as the chemistry of the batteries. For standard 3.7 volt lithium ion cells (like common 18650s) in simple configuration (single, 3-series, etc.) there are many cheap options available that will do the trick. However, I ended up designing my own for some of my bigger projects involving complex custom series-parallel packs or less-common chemistry like LiFe.

@junuhunuproductions 5 лет назад

@@PropaneTreeFiddy Oh my, I always wanted to make a custom bms. Can you share how you designed your own?? I need a bms for my 6S8P 600Wh li-ion battery pack before it blows up :)

@gamingtechtamil69 5 лет назад

Can you build a pure sine wave inverter using 4017 ic and ne555ic?

@DSLRDIY 5 лет назад

Nice video!!! , I was wondering and looking for a hot swap battery pack, I want to use two 2S 18650 7.2v battery packs and be able to switch them if one is out of juice so I can have a continuous output, something more nice than using 2 diodes. Any ideas?

@dannyagunbia206 5 лет назад

Almost got a million subscribers

@dumbdeniz 5 лет назад

i love how you say "JLCPCB" make a video about yourself saying JLCPCB for 1 hour

@peerappel2012 5 лет назад

MrScott6000

@wouter11234 5 лет назад

Would be great marketing for sure

@hyperhektor7733 5 лет назад

10hr version is more trendy now

@MedSou 5 лет назад

*That's nice* 👍👍👍👍👍

@MCsCreations 5 лет назад

BTW, happy new year! 😊

@kvlpnd 5 лет назад

I can watch an entire video of you doing soldering just for fun.

@avejst 5 лет назад

Thanks for sharing😀👍

@tchellosilveira 5 лет назад

Hello GreatScott! Is it possible to use a brushless motor as a stepper motor ? I was thinking about this when seeing the camera stabilizers that use ATMega and brushless motors, the stabilizing gimbal.

@Epic-Electronics 5 лет назад

Your videos are always very exciting!!🤘🏻 I have a question about the general purpose dot pcb boards, where do you buy this boards? Thanks in advance for an answer.

@lex4play394 5 лет назад

Hey! I'd appreciate help very much. I build my diy boombox, but without battery and everytime i unplug it the car radio forgets its settings

@glewiss6696 5 лет назад

Hi Scott, Nice video again! I was wondering which microcontroller you end up using and enjoying the most since you have used several ones already such as atmega328, esp32, stm32, ... Thanks a lot!

@jcchouinard3792 5 лет назад

Good Vidéo :)

@VKRenato 5 лет назад

Excellent, video. Next, closed loop bldc servo.

@tesseract342 5 лет назад

awesome!

@sciencetech9922 5 лет назад

Soon your channel get 1m. Subscribers....

@waheedhafathmath9298 5 лет назад

I have a broken cd drive and when I force the cd drawer in side the led lit even if it was not connected to any thing so I took the motor and tried to get power out of it however it didn't work. Can you tell me why this is happening

@GreatNerve 5 лет назад

Nice!

@davidfox9048 5 лет назад

I dont understand but i enjoy your video

@argentinomacrifuevidaltamb3772 5 лет назад

Excelente capo. Gracias

@commander_red 5 лет назад

Do you think that you can use the Arduino Uno Analog I / O pins to make an oscilloscope or something like that?

@thereynolds2725 5 лет назад

You can do it. I did. But it is almost worthless. It is a very, very poor oscilloscope.

@manuelplascencia3223 5 лет назад

hello i have a question about if i am using an arduino uno what pins do i connect SDA and SCL? thank you so much

@bagassetiawan1478 5 лет назад

excellent, in 10 minutes there are more than 1,000 viewers

@Deepdown. 5 лет назад

Hi GreatScott Can you please make a video on how to build a heartbeat detectors and I will really appreciate if you also include in the video how to make an ECG(electrocardiogram) using some low pass filter and operational amplifier. please help me. Thanks.

@JVMP 5 лет назад

Can an Arduino Nano be used as well? I am not familiar with the board you used, so I dont know if the code can be used on Nano as well.

@lunarz7117 5 лет назад

Wouldn't the 'knob' sketch in example sketch also do the same thing (with little modifications of course)?

@waheedhafathmath9298 5 лет назад

Is there a way to off the charger when the device reaches the max charge.

@ZeniethLily 5 лет назад

Great project, I assume it will be possible to adapt it to switch to a narrow pulse mode (760us)?

@MetalZaraki93 5 лет назад

Got a question out of contest. Will you ever make an USB/TOSLINK(?) DAC? I saw the basics video and was really curious to see maybe a proper one functioning on pc or tv. I didn't find anyone doing it.

@Veso266 5 лет назад

can you tell me why I cannot dim LED bulb properly it just flickers and does not want to dim? is there a way to modify it to be dimable?

@rizkyp 5 лет назад

Lipo or ESC powered on thing I know is that it need to have a common ground or the signal can be floating which means the negatives need to be connected and shared.

@davidianmusic4869 5 лет назад

Are you taking suggestions? Long ago I built a metal detector with just a magnet, coil, and multimeter. I could use a nail detector, but have no time or workshop to test. Any simple ideas on using an Arduino and pw/frequency modulation? And thank you for the inspiring projects. I’ve built a few of my own designs after seeing what you have done.

@chrissgamer48 5 лет назад

On the lipo protection video ypu showed that your going to make a new gameboy thingy when is it going to come?

@mindaugasvaskevicius1818 5 лет назад

Setting the timer register bit values but to set a pin to output not using DDR? Besides 4 push buttons pot and a LCD, a little bit of an overkill, don't you think?

@andreimihai5266 5 лет назад

Hello mate, y run in to a problem, y can't connect my phone to my BT 05 Bluetooth module, do you think you can help me?

@julius6239 5 лет назад

How could i make a arduino keypad lock for circuits? With a lcd to show that it is locked/unlocked

@MicheleHjorleifsson 5 лет назад

is there a way to reverse the rotation direction of the bldc ?

@foamyrocks665 5 лет назад

Where can I buy that silver copper wire you are using in your circuits?

@michal_c9007 5 лет назад

Nice now add to it rpm meter and power meter to define efficiency BTW in arduino is scatch named servo knob it can create pwm just like yours code but is not that precise

@farisdelic5493 5 лет назад

Perfect😏

@murugasenram7749 5 лет назад

Is that possible to create speedometer for cycle or wind mill speed in audrino nano that should be portable and is that possibe to create a skatebboard that powered by bldc and mamual transmission 6 speed with n

@rsphie80 5 лет назад

great vid as always, thanks scott!

@KrisX7331 5 лет назад

So many motor and ESC related content lately. The quadcopter is coming!!!

@rahultej2248 4 года назад

Кристиян Митев 2022 he said.

@EasyOne 5 лет назад

nice

@lsudan2670 5 лет назад

Easy One 😏

@brotschuh 5 лет назад

Guten Rutsch!

@shreeyatyagi 5 лет назад

Can you make a video on how to optimally read from several sensors from multiple arduino together? Thanks.

@salmanakbarkhan7866 5 лет назад

Can you tell me? How to select the correct farad value of capacitor.

@NienteNessuno 5 лет назад

Can you make a review of the DPS5020? Thanks!

@tonyli1212 5 лет назад

3:28 ...you use the highlighter as an eraser?

@jesusaguilarsongco2240 5 лет назад

you so smart

@mazl1322 5 лет назад

can you make an DYI o BUY video where you make an digital ignition system for example for your simson moped

@tonyvarghese75 5 лет назад

Nice

@mrroobarb 5 лет назад

Nice work - where do you source your solder? (just asking because you seem to go through several pounds of it in each video ;-))

@pinkysharma8884 5 лет назад

Hey Scott I have a great project idea for you basics of LCD and driving them with arduino ,wait a while not the ones with cog or otger controller but bare LCD which is quite difficult to control using a microcontroller

@DIYMODIfY 5 лет назад

hey can you make a simple cubesat or a mini satellite

@onjofilms 5 лет назад

Anybody else here get tingles in your spine when you see someone rub a magic marker?

@DJkillstyler 5 лет назад

Yo GreatScott, i have some ideas for projects you can try/create to make a new video :D 1. a mobile car heating for the driver area and windows 2. a present card, and if you open it will play your music 3. a little spy cam with memory for videos Hope this are good concept s for you ;p

@MrBlockyTV 5 лет назад

So you explored bldcs extensively now - how about an esc/inverter project for 3 phase induction motors? Ps: guten Rutsch!

@624andrewwafik3 5 лет назад

Can you make the shake torch again but with more details

@MrJob91 5 лет назад

Does it work with dshot?

@vincentjacobs6774 5 лет назад

Thanks! The first channle woh dose not make an awful best of!

@EDISONSCIENCECORNER 5 лет назад

Awsome

@darkstar2111 5 лет назад

Hi Scott, thank you for video. Please work on your code formatting. It looks like braces are in random places. I know that Arduino IDE is far from perfect, but it helps a lot in larger projects. Kind regards!