No video :(

Make your own flagpole - sturdy, affordable, & simple!

Подписаться 31 тыс.

Просмотров 36 тыс.

50% 1

You don't have to shell out $$$ for a flagpole when you can have the satisfaction of making your own. I'll walk you through it step by step and make it easy for you.
Ingredients:
2 - 10 ft chain link fence top rails (1 1/4" diameter)
2 - Eye bolts w/ nuts
1 - 12" 1 1/4" diameter nipple & 2 end caps*
2 - carabiners
(optional) 2 - quick links
1-2 bags of concrete post mix
An American Flag
*Use galvanized rather than black to avoid rust.
Allegiance Flag Supply didn't sponsor or pay me for this video. They did provide the flag to me free of charge after I researched the best American made American flags and reached out to tell them about my project. They were very happy to provide a flag for the project. And I'll never buy another flag besides Allegiance Flag Supply flags.
Follow me - @joelnert

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@petemiller519 5 месяцев назад

Thanks for the video, one change I would recommend is reversing the poles so the female end is on top of the male end upon insertion.....ahm. That way you obtain shingleing and no water gets between the poles at the joint.

@creamwobbly 2 дня назад

It follows you'd be burying a narrower diameter tube in the ground also.

@alanwhitsitt5196 26 дней назад

Great idea! I could see putting an eye bolt on top and one down lower, then use paracord to tie on the carabiner. Then you can raise and lower your flag without taking the pole down.

@TheLizBailey 2 месяца назад

brilliant ‘recipe’ and easy! Got everything done in no time. Thank you for your service 🇺🇸

@russellculler524 Год назад

Looks great! Hope I can do that kind of job. Thanks for your service. I was in Germany, 'vietnam era'

@scottbuck17 5 месяцев назад

The American Legion's website has American made flags you can purchase. The money also goes to a good cause.

@oscarfarley4104 6 месяцев назад

looks great. All I would recommend is using pvc collars that rotate around the pole to prevent the flag from wrapping. :)

@JQUICK21 20 дней назад

trying to picture that but not sure how that would look exactly.....

@LeafThereBePlants 10 месяцев назад

Well brother thank you for your service and I’m on my way to purchase materials now! I’ll send a photo over when completed. God bless and take care

@joelnert 10 месяцев назад

Awesome!

@jamesmarquez3361 Год назад

Hollister CA. Here Worked beautifully! Thank you!

@Rescue_animal_advocate 2 года назад

Awesome video, Joel. Love how the flag looks at the house, and especially love the cap hack, for the NIPPLE in the ground. Genius genius genius!

@SLLindstrom 3 месяца назад

Going to Home Depot this weekend Thank you

@sonnybowman 4 месяца назад

I recommend using flag mounting rings and a larger/deeper base. The amount of force created by a strong wind on a large flag can be enormous.

@jamesboggess7980 Год назад

Awesome idea! Thank you for the video!

@leftymumf9872 2 года назад

I've never even thought about putting up a flagpole, but after watching this video I can't stop thinking about it. Would it be possible for you to just come to my house and build it for me. I might have a case of Pepsi in it for you. 🤪

@joelnert 2 года назад

Done

@jeffro4080 2 года назад

Looks great, I paid way to much for mine but it's the outcome that matters. Stay fresh my friend. 🇺🇸

@davidgriffin3981 Год назад

Awesome "recipe" and thank you for your service.

@bvansuch 6 месяцев назад

Thanks for this video. I will be making one this weekend. Hooah!

@joelnert 6 месяцев назад

Niiiice!

@tammysacres7422 Год назад

Ty definately going to do this this weekend

@Clemson-rc2yq Год назад

I will add out two i hooks at half staff so you can fly your flag at half staff when time is warranted to

@joelnert Год назад

Like today for example.

@Clemson-rc2yq Год назад

@@joelnert yes sir I made one that can and flew it half staff today

@stephenshelton4267 2 года назад

Interesting build! I hope you don't have HOA Karens that act like they own your house.

@joelnert 2 года назад

This is Idaho. If Karen tries that she's off the HOA.... I hope.

@stormy8612 10 месяцев назад

@@joelnert I'm also in Idaho! I'm hoping my HOA leaves me alone once I construct my pole! It's worth the fight if needed though! Thanks for the instructions! I do have a question though.... When you need to take the flag down and/or fly it half mast, is it easy to disconnect the poles or do you need to have a tall ladder and do it that way?

@joelnert 10 месяцев назад

@@stormy8612 don't need a ladder to take it down, comes apart Easy.

@LSU1-wo5hj Год назад

Anytime I’m get an idea there is always a video. I’ll sub just for thinking alike.

@robcoastalga8279 2 года назад

Good share sir. Thanks to your Pops too! Subscribed!! 🇺🇲

@joelnert 2 года назад

So glad to have you on board my coastal GA friend. Lived in Georgia for a while and loved it

@empire595 Месяц назад

Thanks

@ssniadach012 Год назад

Making one Today Thanks

@j-boy9256 Год назад

How did the build go? How's it holding up where you live? Do you get a lot of wind. Thanks

@ssniadach012 Год назад

@@j-boy9256 Build went Great . Followed your plans and used two foot pvc at the base and creted it in and have not had a single issue, We live in Florida by Ponce inlet and have gotten rocked by some bad storms with crazy wind. Thanks Again

@empire595 Месяц назад

Thanks!

@joelnert Месяц назад

Thank you! Hope your Flagpole serves you well

@397coney7 Год назад

Hmm, I love the idea. But, I’d like to add pullies to mine. I like the idea of just using rope to change flags out. I’ve always bought those retractable in-ground poles, but they are always a pain in the butt to lower because they stick and then the push pins break. I looked into poles with pullies, but they get real pricey. Some are thousand of dollars🤦‍♂️. Anywho, I’m going to try your method but just use pullies and I’ll also paint mine white. Thanks!

@FromThe3PointLine 4 месяца назад

Keep in mind back in the day, materials were made with better quality Maybe that's why it lasted so long

@timklima6016 Год назад

So the flag hangs down until the wind picks up ?

@Johnny53kgb-nsa 11 месяцев назад

Cool idea from you and your Dad. Where you pole slides into the base short section, you have no wobble problems? Thanks, John

@joelnert 11 месяцев назад

No wobble problems. It's been over a year and it's still working great every day.

@mattmohr7244 Год назад

This looks awesome - thanks for sharing! Do you think the pole would be sturdy enough to also be an anchor point (below the flag) for a solar shade? A little flex would be ok I imagine.

@patrickjohnstevens Год назад

I just did this. I think it would work great for this purpose. The two things different is I’m installing a security pin near the bottom so that it will prevent the poll from being pulled out accidentally from an unexpected large wind gust. I’m also only using one ten foot poll on each side of the driveway with a two foot deep hole. It’s a rectangle one. I want to also use each one as a flag pole as well. Our football team flags on game day and USA and state flag

@TT-di5ut Год назад

Thank you so much 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸 LGB😜

@user-qc3ft5vx4r 2 месяца назад

Does the flag end up wrapping around itself after a while? I was looking for a way to allow the flag to swivel around with the wind where it's attached to the pole so it won't get caught up?

@joelnert 2 месяца назад

It never gets wrapped around or tangled

@creamwobbly 2 дня назад

Costs a bit, doesn't it? I can see putting your kit together from bits you happen to have already, but those hardware pieces really add up for someone starting from nothing. Plus they're probably made in China if you're going for cheap, so may as well just browse Amazon and get a kit from one of the multiple anonymous fly-by-night importers with memorable names like Zowpzim or Mplftoo. The only thing you're missing there is the concrete.

@dmwiggy7661 2 месяца назад

Any thought on a pulley to be able to raise and lower

@russelllogan8198 Месяц назад

How did you stop the flag from rapping?Or do you have any idea? Like your idea though love it!

@joelnert Месяц назад

@russelllogan8198 it never wraps up like this. I couldn't get it to wrap up if I tried

@marh6309 4 месяца назад

How has it held up in the weather these past 2 years?

@jimmckay3841 4 месяца назад

My yard is all pavers you think if I fill a Homer bucket up with cement it will stay up? Last thing I want is to come outside and see old glory on the floor

@joelnert 4 месяца назад

If you bury the 5 gallon bucket into the ground it might work. If it's sitting on the surface I think it will tip right over.

@jimmckay3841 4 месяца назад

@joelnert thanks maybe I could strap it to my deck somehow

@perrylund4889 2 месяца назад

How does it hold up to high winds

@joelnert 2 месяца назад

It's been two years, we've had plenty of windstorm. No issues

@aaronmentzer7831 2 года назад

Excellent vid. Where does one go about purchasing a shirt like that, which if I'm not mistaken, depicts the breaking of the world record for most toothpicks placed in a beard?

@joelnert 2 года назад

Thank you sir. There was a limited run of them a couple years ago. Perhaps someday there will be another run.

@bobbrown5241 Год назад

Nice but doesn't the flag wrap around the pole. There should be a looped weight ahead bottom so the flag will turn around the pole. And you should have something at the top that spins around with with the flag.

@joelnert Год назад

It never has got wrapped up or tangled up.

@donaldsmckenzie8227 9 месяцев назад

Once in place and upright, for maintence and cleaning purposes, how do you take it down?

@joelnert 9 месяцев назад

Whenever I need to take it down for weather I just pull both poles and store them in the garage. I put the extra cap over the pipe in the ground.

@jesica9540 Год назад

Great video! What was the total cost? 🇺🇸 Love my country

@dennisdavis8649 9 месяцев назад

Would that flag pole hold two flags without bending

@joelnert 9 месяцев назад

Nope. It's a simple one flag pole.

@godsgeneral006 10 месяцев назад

Could it holdup with flying 3 flags you think? Thanks for the video

@joelnert 10 месяцев назад

Probably not. If you put more than 1 on there, the wind might take out the pole. But it's been a year and a half now, and I've had no issues with one flag.