Use a peltier in parallel with a 5v fan and add a aluminium thin sheet to the cold side of the peltier device to increase the cooling area. It works very well even on hot days. While playing Black Desert mobile on my Xiomi Mi 8 the battery reached temperature above 42 °C. With this set up it stays between 28 °C and 33 °C, depending on ambient temperature. Without the peltier device the heat can't do almost any difference if the day is too hot.
Planning on doing this with (Fan) Fan Size: 40×40×10mm Connector: 3pin Voltage: DC 12V Rated Current: 0.087Amp ±10% Bearing: Sleeve Bearing Fan Speed: 5500 RPM±10% Noise Level: 16-25dBA Air Flow: 10-28CFM Life: 35000 hours (Peltier) Rated Voltage: 5V DC Max. Current: 5A Max. Temperature Difference: 67 deg C Max. Voltage: 6.2V Max. Refrigerating Power: 19.4W Couples: 49 Size (L x W): Approx. 1 x 1inch / 25 x 25 mm Then connect both to 12v 1.5a adapter via usb, I will put thermal pad between the phone and peltier, will it work without condensation?
@@franciscoayon9470 unfortunately, found prebuild cooler. And there's condensation when being use. Since then I stop using any active cooler. Only playing game infront fan.
I made one using the parts from a mini soda cooler. Runs on 12 volts and has a much larger heat sink and fan. Playing cod mobile on low graphics overhead my phone after 20 minutes. Now I play on high graphics no problem my phone is ice cold.
condensation comes from water in the air that forms moisture, your phone is almost air tight so there's zero chance of condensation occuring inside the phone
Do not do this if your phone doesn’t have water resistance. If the temperature drops below ambient, water will condense inside the phone and damage your device.
Orang indo bro? rekomendasi pake komponen kek gini karena itu komponen nya ngipas panas terus ngeluarin di depan kipas nya jadi gak langsung kipasnya ngedingin hp biar ngehindar dari ngembun kata orang orang
Bruh do you even know how much power your power bank can produce? And how much voltage does it produces...and how much does the peltier need to work efficiently
Why do u have iphone for 1 300 $? You can buy Asus Rog Phone 5 with Snapdragon 888 for 1 100 $ and this is most powerful phone is the universe. P.S: and this phone has its cool cooler
It works even better if the output is 12v 5 ampere power supply with AIO radiator. In theory you even make an AC. Radiator temps with fan temperature maintained 30°C in hot side , u can get 0° in cold site. Try it thanks later..
use usb cable which has black and red wire bcoz red is positive and black is negative dont use this color coding cable(red wire is + and black wire is -) u have to connect both red wire of peltier and fan in red and other blacks in blacks
yes. For better result use a 5v fan in parallel with the peltier module. You can use a 5v-2A charger or a 12V-2A charger. Increasing the voltage of the charger will make even lower temperatures
@@sigitbudi6755 With a 12v fan you will need 2 chargers. I tried 12V fan in parallel with the Peltier module using a 12V-2A charger. The fan is too slow and wasn't enough to cooldown the the heatsink. Maybe be it will work if you find a high rps 12V fan
@@sigitbudi6755 Even with 12V adapter the peltier will get almost all the current and the fan will run very slow. At least mine did. Is way better with 5v fan in parallel with a peltier device with a 5V-2A adapter
