Make Your Own Screen Printing Screens EASY 

Going on

Bro gets it 😭❤️

Absolutely. Just straight 2 the point

Hi Dina, the link to the exact mesh that I used is in the more info section, but any 110 mesh will work well.

what do you used for the screen

ahhhh great idea!

:) I still check my comments. Thanks for the kind words.

I'm from Ghana please please help me

It's in his description

What is that material he is using for that much bounce

lol

I've seen them used once before. It all depends on the size of the frame and what size your print is. The instance that I saw, the user treated each half of the frame as two separate one color screens. Personally I wouldn't recommended it unless your print is small (for instance you're printing on baby t-shirts or bibs).

There is a method that I use for stretching canvas on frames that works very well! You start in the middle of the frame by stapling one side and then directly across from it pull the canvas and staple. At this point ONLY staple 2 staples 1 inch apart. Go to the opposite and stretch and then staple 2 staples one inch apart. Then do the same procedure with the other sides of the square, again only stapling 2 staples 1 inch apart. You should now have 2 staples on each middle of the square. And it should be stretched tight in the 4 directions. Then going clockwise around the perimeter stretch and staple 2 staples on side A then 2 staples on side B then 2 staples on side C and then 2 staples on side D. Just continue doing this in a clockwise manner stretching as you go and stapling. When you get to the end of the sides the canvas should be wrinkle free and taut. Hard to explain but once you do one you will see it is easy and very effective. Just try to have uniform stretching as you proceed around the sides. When you have reached the end going clockwise then do the same sequence but going counter clockwise. Hope this is not too confusing and helps!

did you not watch the video at all?

Literally the whole video is about getting out the ripples

I'm using just about the cheapest staple gun you can find. You can get one for $10 - $12 at most stores (Walmart, Home Depot, Lowes, etc.).

That staple gun is so cheap you’ll be surprised it’s literally like $7-$10.00 if you can’t afford one just say that 😐

Explore life