Making a Drop Point Hunting knife, without the use of a belt grinder

Подписаться 12 тыс.

Просмотров 65 тыс.

50% 1

Custom Knife Making: The "No Belt Grinder" Drop Point Knife. Knife making with common tools.
Thank you for joining me on my channel. Today, we will be making a Drop Point Hunting knife, using only commonly available tools that you will find at any local hardware store. No belt grinder was used for this build. I made this knife using 3,2mm 1070 steel for the blade, 3,2mm steel pins, 6mm Carbon Fiber tube for the Lanyard hole and Rhodesian Teak for the scales. Feel free to use whatever you have available or prefer. Don’t forget to like and subscribe.
Download the template from below link:
drive.google.com/file/d/1MhA_...
01:00 Cutting the Profile
01:30 Hand filing the profile
02:30 Mark and drill the pinning holes
04:20 Mark the plunge lines and bevel areas
07:00 File the plunge lines and bevel areas
12:50 File the sharpening choil
13:40 Prepare the steel pins
16:13 Prepare the wood scales
18:23 Rough shape the scales
23:29 Heat treat the blade
26:30 Remove the warp from the blade
28:50 Hand sand the blade
33:12 Prep the scales for glue-up
34:49 Glue and assemble the knife
37:38 Clean up the pins
38:18 Peen the pins
39:00 Shape the scales
34:20 Sharpen the blade
DISCLAIMER:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Zeeman Knives will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including losses, damages, or injuries sustained while you were trying to emulate the actions and projects on this channel).
Always wear the appropriate safety clothing.

Опубликовано:

30 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 139

@tb8249 3 дня назад

One of the best videos I have seen, explained in very detail, good work!!👌👍👌👍🔪🔪🔪🔪

@Strohann501 8 дней назад

Great video!! Everything super detailed, very good explanation about why you do what you do. Helps a lot!

@Roger21989 7 дней назад

Great tutorial, well done!

@addappt 14 дней назад

Beautiful process and great video to watch. True craftsmanship and attention to detail. Great work.

@Mark--Todd 2 месяца назад

Absolutely 1st class. 48k views and only 1,2k likes seems somewhat rude to me given the quality of this video

@zeemanknives 2 месяца назад

Thank you for the compliment. I try to produce decent quality...and am thankful for the views I get. Not sure how to bump it up though. Oh well, time will tell I suppose.

@jasonhojnacki2234 2 месяца назад

This was the best video on the subject of knife making I have ever watched. Thank you so much

@zeemanknives 2 месяца назад

Thank you, appreciate the comment!

@Narahari-nt7uc 7 месяцев назад

Отличные видео. Без лишней информации и заумных слов. Все по делу. Первый свой нож делал подсматривая этапы создания ножа у вас.

@zeemanknives 7 месяцев назад

Спасибо за добрые слова. Всегда приятно слышать, что мои видео помогают другим создать свой первый нож.

@gricnime 8 месяцев назад

just goes to show how much a belt grinder speeds up the process of knife making, it took you 5 months to make a new video cause you went basic... Still, that was one of the most complete tutorials for new makers. welcome back! hope to see you more!

@zeemanknives 4 месяца назад

Thank you. Yes belt grinders make life alot easier...but not neccesary. Thats the point I was trying to prove here. Although, like you rightfully mentioned...time and patience is key to get it right.

@ctasdmebrc4925 2 месяца назад

And the process is as fulfilling as the destination, in this case. So no hurry.

@TheGarner77 7 месяцев назад

Always something to learn, we often take for granted the technologies we have.... South Africa on the other hand, look our power away due to "Load shedding" we just have to adapt. Thanks for awesome content sir.

@zeemanknives 4 месяца назад

Yes, loadshedding its part of our reality. Gotta learn to use those hand tools!

@tamimamini7446 8 месяцев назад

Your videos are very informative and easy to follow. Keep up the good work and inspire everyone else just like you inspired me.

@zeemanknives 4 месяца назад

Glad to hear that! Happy knifemaking!

@DougieNMySnuggy 2 месяца назад

i have the cheap HF 1x30 belt grinder. I've modified it to be more suitable for my knives. I've learned how to freehand bevels with it. I can make a decent looking knife with the crappy belt grinder. HOWEVER, knife making is therapeutic for me. And there's nothing more therapeutic than putting on some tunes, zoning out the rest of the world, and hand filing bevels.

@zeemanknives 2 месяца назад

Yes that is true...hand filing, and hand sanding tends to leave you to your thoughts. And, you learn to use the tools you have at hand. I remember when I first got my 2x72 belt grinder, I thought to myself now I am going to produce knives at a lightning pace, only to very quickly realize that freehand grinding is a skill that needs to learned, and no machine regardless of quality will teach you how to do that...it's still something that I sometimes don't get right....hand files on the other hand...you cannot go wrong with it...:)

@gregnutt9918 2 месяца назад

This the best instruction video, I have seen, yet

@zeemanknives 2 месяца назад

Thank you, appreciate the comment!

@tiagobrasil5910 3 месяца назад

Excellent video and excellent teaching. What a wonderful knife. God bless you. Thank you very much.

@zeemanknives 2 месяца назад

Thank you, appreciate the comment!

@Cptnbond 8 месяцев назад

Amazing episode, and perfectly easy to follow along. Thanks for sharing. Cheers.

@zeemanknives 4 месяца назад

My pleasure, thank you for watching!

@billhayward1585 3 месяца назад

Great Video. Very easy to follow. I'm slowly building up my confidence to give knife making a try. Thank you.

@zeemanknives 2 месяца назад

Thank you, appreciate the comment! Build one knife, no matter what the end result might be...you will learn alot from it. Then move to the second...

@mikemolina949 8 месяцев назад

Always a pleasure watching your videos! Please keep making more like this ! Very inspiring and very Informative! Thank you for the content

@zeemanknives 8 месяцев назад

Thank you for taking the time to watch my content. I really appreciate that! Glad you find it useful! Keep well!

@Trav261 4 месяца назад

I really enjoyed watching this, you made it look so easy and the instructions are very easy to follow. thank you! 🙂

@zeemanknives 4 месяца назад

Thank you for watching, glad you like it. Its a practice thing...do it over and over again and it becomes easy.

@nathanaelcole7102 5 месяцев назад

Great video! I really appreciate the simplicity of your process, jigs, and fixtures...thank you!

@zeemanknives 4 месяца назад

Thank you. Yes, that is the point I am trying to bring across. You need need expensive machines to make a knife.

@snakeplissken3061 7 месяцев назад

Sometimes the simple processes are best. Excellent video and great looking knife. Well done, sir.

@zeemanknives 4 месяца назад

I agree...you cannot go wring with the basics. Thank you for watching!

@WorkerDroid 7 месяцев назад

Beautiful knife. Straight to the action for every step. Very inspiring for the average guy to try and do as well. Great job on the video and the knife. Thank you and congratulations..

@zeemanknives 4 месяца назад

Thank you! Happy you find it usefull!

@TexasPatriot79 6 месяцев назад

I bought a cheap belt grinder and I really struggle with grinding the blades..but I tried your file and eye-bolt method. Even though it takes FOREVER, it produces the BEST grinds ever! Thank you for the inspiration!

@zeemanknives 6 месяцев назад

Try combining the two. Take off the bulk of the metal with the grinder, then finish on the filing jig. Free hand grinding takes alot of practice, and depending on the blade shape can be very frustrating to get right. I also dont always get it right...and I hate wasting material because of messed up grinds.

@jonathang.5092 3 месяца назад

Fantastic craftsmanship. I really learned a lot from this. I've made about 5 knives now, but nothing as nice as this.

@zeemanknives 2 месяца назад

Thank you for watching. Keep on making knives...you see an improvement with everyone you make.

@ashishsawant6403 5 месяцев назад

Nice informative video. Thanks !! Love from India 👍

@zeemanknives 4 месяца назад

Glad you liked it!

@paulmendolia8483 2 месяца назад

One of the most complete instructional videos I have ever seen and I have seen hundreds. At least you dont have that awful head banging music in the background. Excellent.

@zeemanknives 2 месяца назад

Thank you, appreciate the feedback! Glad you enjoyed it! Regards

@rayellgeral9065 8 месяцев назад

Great video Henk, thanks for the effort!!!

@zeemanknives 8 месяцев назад

Thank you Ray, I appreciate the support!

@DanHelfond 7 месяцев назад

Thank you for this. It was clear, concise, and exceptionally informative. Very well done!

@zeemanknives 4 месяца назад

Thank you! Glad you like it!

@neilhaddifon3225 8 месяцев назад

Great video I really learned alot from it, thank you.

@zeemanknives 8 месяцев назад

Thank you for watching. Glad you could learn from it!

@hdpei3502 8 месяцев назад

My favorite channel, I have learned a lot from it, and I look forward to more updates.

@zeemanknives 4 месяца назад

Thank you, I enjoy comments like these. Glad you like my content!

@grantudemans6381 Месяц назад

Fantastic vid .. thanks

@laca8612 7 месяцев назад

Really Thank you for your video. It was spot on and well created, good explanation! :)

@zeemanknives 4 месяца назад

Thank you. Glad you enjoyed it!

@Semerich_Knives 2 месяца назад

Отлично 👍

@davemcnair1569 4 месяца назад

best explained vidio i have seen thank you

@zeemanknives 4 месяца назад

Glad you liked it

@MASI_forging 7 месяцев назад

Outstanding work. The knife looks cool.

@zeemanknives 4 месяца назад

Thank you for watching!

@kiwich66 5 месяцев назад

Great video. You make it look so easy, and the result is amazing. Very motivating. Thanks!

@zeemanknives 4 месяца назад

Thank you for watching. Glad you liked it!

@eloylobatoneto 2 месяца назад

Show! Gostei desse novo modelo de vídeo narrado.

@zeemanknives 2 месяца назад

Thank you, appreciate the comment!

@user-ly9vb9ef8r 8 месяцев назад

Great Video ! I am also using 1084 and struggling with plunge lines. I agree that the 1084 is forgiving and easier to work with. Two thingsI found helpful from this video is using an oil while sanding the the use of the correct round file with a file guide. Henk has been so helpful in answering questions while I make my first knife. I need to hurry up and get one done, he has asked me twice to see a finished knife. Thanks for the inspiration and encouragement.

@zeemanknives 4 месяца назад

Its a practice thing. Take a piece of scrap steel and just file plunge lines. You will get it right.

@abumamun2503 4 месяца назад

You Very Good Engineer

@zeemanknives 4 месяца назад

Thank you!

@radekbubienko6042 5 месяцев назад

Thanks, very useful video. :)

@zeemanknives 4 месяца назад

Thank you! Glad you enjoyed it

@d-arts7139 3 месяца назад

very nice

@cultivationplus6719 3 месяца назад

You can achieve the rounded transition in the bevel from the plunge by moving the belt slightly over the edge. However much over the edge the belt sits translates to how round of the plunge you get. Thats if your using a 2x72 that is

@zeemanknives 3 месяца назад

Thank you for the tip!

@amitbhattachariya9357 4 месяца назад

You are very innovative.

@zeemanknives 4 месяца назад

Thank you!

@Tromps04 7 месяцев назад

Awesome tutorial as always and your video transitions are top notch!

@zeemanknives 4 месяца назад

Thank you. Well, I try to make it as seamless as possible.

@shaungill6992 6 месяцев назад

Excellent mate thank you

@zeemanknives 4 месяца назад

Thank you!

@pawekozielski2422 8 месяцев назад

When hardening in carbon, I would use a steel section with a rectangular cross-section. Once warmed up, I would insert the blank. This is how I would create a hardening chamber. The color of the shape allows you to additionally assess the temperature. This also reduces the risk of steel burning. I wouldn't delay letting go either. During this time, the steel consolidates its crystalline structure. Immediately after hardening, just to be on the safe side, I would place the blank between 2 flat bars and squeeze it until it cools down. The blank is plastic for about 2 minutes after hardening. This would correct the curvature. Any stress before tempering causes the risk of the blank breaking

@zeemanknives 8 месяцев назад

Thank you for the advice. Keep well!

@edharker5775 8 месяцев назад

Stunning results as usual

@zeemanknives 4 месяца назад

Thank you Mr. Harker

@Sokol10 4 месяца назад

Nice knife, but laborious making process. Well make video.

@zeemanknives 2 месяца назад

It is time consuming, but I find it rewarding. Thank you for watching!

@Order4627 14 дней назад

I don’t have that much time to do what you did, it’s more cost effective just to buy a knife now.

@peteremerson4150 5 месяцев назад

Nice !😀👍

@zeemanknives 4 месяца назад

Thanks! 👍

@sergeykuvshinov6194 5 месяцев назад

Perfect!

@zeemanknives 4 месяца назад

Thank you!

@Yunesko24 4 месяца назад

SUPER 👍👍👍 SUPER

@zeemanknives 2 месяца назад

Thank you for watching!

@mikenorris6769 8 месяцев назад

Your videos are very good, I am making all my knives pretty much by hand, I first used large circular saw blades from sawmill but now I' trying 1084. I can't believe how much easier it is to work with! I have been trying to file my plunge lines with round file but they never seem to come out that great, I will keep trying though, I'm sure I will get it! eventually!

@zeemanknives 8 месяцев назад

It is a practice thing...just keep trying, and you will get it. Do you use a file guide clamp? If not spend the time and make yourself one, or you get commercially available ones but it tends to be very expensive. That simplifies getting your plunge lines symmetrical on both sides. Grab a piece of mild steel flat bar and spend a day just filing in plunge lines to get a feel for it.

@mikenorris6769 8 месяцев назад

@zeemanknives That's very helpful, I have actually made a file guide clamp so will do do exactly as you say and practice on some scrap steel until I master it,cheers

@thorwaldjohanson2526 3 месяца назад

Saw blades will have a heat treat, while 1084 or any steel stock for that matter is annealed. This makes it MUCH easier to work with. Annealed steal is like 5-20 hrc, while heat treated steel is usually 50-68 hrc.

@mikenorris6769 Месяц назад

@@thorwaldjohanson2526 That's great information, thanks, (I only just saw your message!)

@thorwaldjohanson2526 Месяц назад

@@mikenorris6769 you can also anneal hardened steel yourself, make the knife and then heat treat it again.

@jmunsamy 8 месяцев назад

Great detailed content, highly appreciated. Would like a video about your background and how you got into the hobby. Also if you could share who you look up to or others in trade that currently inspire you.

@zeemanknives 8 месяцев назад

Thank you for watching. I am a bit camera shy, but it is something worth looking into to. The audience can let me know what questions I need to answer for them.

@blacklight4460 4 месяца назад

Use cutting oil for drilling and sawing.

@zeemanknives 4 месяца назад

Thank you, yes it saves the drill bits from wearing out too quickly.

@josephbracero8404 5 месяцев назад

It's not gonna look pretty? That knife looks gorgeous!

@zeemanknives 4 месяца назад

Thank you...well you know....its no showpiece, but very functional.

@mikenorris6769 2 месяца назад

That is a great video, I value your tutorials and learn so much from them! Could you please tell me what thickness (in metric) you like to leave on knife edge when doing bevels? Also, should I start process with coarse file for quicker removal then switch to a second cut file to finish, or, do you use same file for whole process, Thanks

@zeemanknives 2 месяца назад

Thank you for the comment. I try to get the edge to about 1mm before I heat treat. I used to start with a coarse file but I found that the deep file marks are very hard to remove...so nowadays I do everything with a medium cut file. The time "saved" by using coarse file is not really worth the time hand sanding afterwards.

@user-sv3op2vm6c Месяц назад

Hello my friend, i like your vids. Question at minute 22:42 you are rounding your handles. Do you you use a half-round file are a regular rectangle bastert!!

@zeemanknives Месяц назад

Hi, i use a flat file on the handle, and a half round file in the rounded sections like the the finger choil and inside of the handle. I prefer medium cut files as bastard file can be aggresive and cause nasty scratches.

@bbarker5766 7 месяцев назад

Awesome simple design with nice crisp lines!! What is the sharpener that you used?

@zeemanknives 7 месяцев назад

Thank you. That is a "Warthog Multi-edge" sharpener im using. Local product to South Africa.

@JohnDoe-sw4kg 6 месяцев назад

Man this was awesome. What was that sharpener you used?

@zeemanknives 6 месяцев назад

Thank you. That is a Warthog Multi-edge sharpener. Local product to South Africa.

@hammertusk1948 6 месяцев назад

Hi man nice video I don't know much about knife making but I liked the video For tempering, you want a orange hot, not white/yellow, not gray. The spine has to be dimmer than red because you want resistance not strength. Basically, do the opposite of 26:09. Anyways butterfly knife would be pre cool!!!!

@nickthompson529 4 месяца назад

I think you’re talking about hardening not tempering. If you heat the blade orange hot during tempering you will ruin the hardness of the blade.

@zeemanknives 4 месяца назад

I usually temper in a dark room to accurately judge the metal colours. It looks much different under a bright light. For the 10xx series and 5160 metals, critical temp is usually around a red colour. Still, always test with a magnet, and of course if you have a kiln with accurate temp sensors then you cannot go wrong.

@nickthompson529 4 месяца назад

Again I think you’re confusing tempering and heat treating.

@zeemanknives 4 месяца назад

@@nickthompson529 Yes you are right...wrong terminology from my side. I heat treat in a dark room to judge the colours of the steel, tempering happens in the kitchen oven.

@andreykotovsky Месяц назад

I have a question, can you gring already hardened steel with a file? I mean if ill buy blank of a knife, is it possible to remove big amount of material from hardened steel?

@zeemanknives Месяц назад

Not with a hand file I'm afraid. You will blunt the file very quickly without much progress if the steel is hardened already. A belt grinder will be a better option in that regards, or you can anneal the blank and re-harden after filing.

@andreykotovsky Месяц назад

@@zeemanknives ok, thanks for reply 🙂

@maniac8246 7 месяцев назад

👍👏👏👏

@zeemanknives 4 месяца назад

Thank you!

@harisbudiwicaksono6112 6 месяцев назад

How do you make the line in the tip ?

@zeemanknives 6 месяцев назад

Hi, sorry I am not sure which line you are referring to?

@harisbudiwicaksono6112 6 месяцев назад

@@zeemanknivesthe line in 4:55

@MWard-zk4wg 4 месяца назад

The flickering at the beginning hurts my eyes. Otherwise a most excellent video

@zeemanknives 4 месяца назад

Thank you for the feedback. I will tone it tone a bit in the future.

@madeleineventer667 Месяц назад

Are Jo in Bloemfontein

@zeemanknives Месяц назад

No, Im based in Johannesburg.

@helmutgath2895 3 месяца назад

Ich arbeite mit Maschinen um mir die Arbeit zu erleichtern und um Geld zu verdienen.😊

@zeemanknives 2 месяца назад

Yes, that is the goal of every knifemaker I suppose...however not everybody has access to machines, and in South Africa, we have no electricity during parts of the day...so, we have to learn to work without power tools. Thanks for watching! Regards

@tamimamini7446 8 месяцев назад

Am I the first comment?

@zeemanknives 8 месяцев назад

Yes you are the first to comment. Thank you for the kind words. Happy to hear that you find my content useful!

@NuritheTurk 5 месяцев назад

The strobbing light show may be dangerous to epileptic folks.

@zeemanknives 4 месяца назад

Thank you for the feedback...Ill tone it down in the future.

@PaulTardino 5 месяцев назад

Why peen the pins only to sand them flush with the scales? Doesn’t that defeat the purpose?

@zeemanknives 5 месяцев назад

The metal pins expand slightly into the wood where you peen it, thats why you need to becareful not to peen it too much because you can crack the wood if the pins expand too much.