Making a MULTISCALE Fanned Fret Guitar Neck from a CHEAP eBay neck!

Подписаться 258 тыс.

Просмотров 20 тыс.

50% 1

This video I show how I made a cheap usable twisted bass neck into a high end multi-scale fanned fret neck. I think this might be able to be done easier than how I did it, but overall it was just as much work as making a neck from scratch. Here are the parts I used for this build:
Use coupon code: GAG to save 10% on all Comgrow products!
Comgrow Z1 CNC Laser engraver/cutter: www.comgrow.co...
honeycomb
www.comgrow.co...
air assist
www.comgrow.co...
enclosure
www.comgrow.co...
smoke purifier
www.comgrow.co...
Here is the neck I'm fixing: amzn.to/3StaJC5
The truss rod I used: amzn.to/3Svk2Se
The fret wire I used: amzn.to/3M3052I
12" radius block (which I also used to make my fret caul): amzn.to/3fwtshI
*Prices mentioned in this video are subject to change without notice, please check the links for current pricing.
Full disclosure: I am an Amazon Associate, and the links in this description are affiliate links, which means that if you make a purchase, it doesn't cost you any more money, but I will earn a commission. This video is also sponsored by Comgrow.
Want a Guns and Guitars shirt? buy one here: gunsandguitars...
Facebook: / gunsandguitarsofficial
Instagram @gunsandguitarsofficial
Support me on Patreon: / danthompson
Current Patrons (as of this video)
$5 Patrons:
Yosemite Sam
Mynameisnotjeff
David J Kitelinger
Derek Weathersbee
John Clark
Tanner Redman
David Morgan
David Vaughan
LesLamcke
Fabian Muresan
Alejandro Vega
Captain Rudy 4021
Chris Hopkins
Tony Butterworth
j
Ben Berscak
Jeff Savoie
Mike Bennett
PEEPEE POOPOO
Colin Jenison
Will Fowler
Aidan Peet
Matthew Renegar
Tommy Transplant
Aaron
Daniel Newman
Brian Wigton
Dave Speller
Elijah R Sell
Andrew Epperson
Jeffery A Fallon
Andrew Jeffries
Philip Honeycutt
Travis Blakely
Daniel Russell
Declan Fischer
Paul Messina
Joseph Lacroix
samuel ungeheier
Carlos A. Lizarraga R.
Chriz
Conor O’Doherty
James Populo
Ian Davies
Alex Trocker
Laramie Reg
Troy Thompson
JeffG
Sean Quigg
Dave Van Englehoven
Jamie Cucalon
Maro
Osel Rodrigues
David Anderson
Gerald Ringgold
Brian Brown
Donald West
ChaoticDanny
Ron Clevenger
Matthew Burch
Victor A Estes
Ken Widmer
Trinel Earsery
Malakai Messina
$10+ Patrons:
Adam West
Brandon Leafblad
Christopher Heath
john best
Nicholas
Peter Champlin
The Grapeman Reform
Marcus Warren
James Lamb
Koss Billingham
Drew Lawton
Jim Shepard
Mark Cockrell
William Herrera
Chris Thomason
John Morris
Patrick Emry
David Capp
Tim Chapin
Timothy Potter
Austin Hewlett
James Robers
Seth Johnson
James Shepard
Touch of Oops
Justin Setters
Jack Stow
Daniel Rota
Michael Fierro
Jeffery Maslan
Johnathan Simmonds
Wolfgang Widmer
James Campbell
Corey Muxlow
Casey Smalley
Tim Stephens
E
Matthew Caffell
Clint Walker
Drew
Al Philp
Robert Lewis
Jaden Bass
Rob Haag
Gregory Clark
JoshuaTroller
Josh Perez
Samuel Ungeheier
Billy Sullivan
Brandonlee
Background music made by Jordan Rowan of iMakeMusic
Audiojungle: audiojungle.ne...

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 100

@helbertchiu Год назад

Cloth iron is what I use to remove fretboard. Leave it on for around 5 minutes on highest setting then use a paint palette knife to slide it under, sometimes a thin ruler but I found palette knife works best for me. Great idea on the fretslot cutting technique! Gonna use the same for my next project.

@antonylaas7155 Год назад

Totally agree. I used an iron to remove a fret board as well as a set neck from a guitar I was building and messed up. Got it right the second time. And was able to reuse the same fret board. The iron caused no damage.

@tranka6112 Год назад

Amazing... you know, I bought myself a fretpress, and now I think to myself, why I did that. Dan, you always impress me with these simple ideas, that just work as well, and clearly show, what real DIY is all about: getting creative with what you already got!

@foadrightnow5725 10 месяцев назад

Way more work than it's worth!

@KeyMondYTGaming Год назад

Dan, thank you for pointing out the website multiscale. Im building a 7 string fan fret, and the fan fret length is quite big compared to the one you chose, and really it just needs the right length to put the fixed bridges. Awesome stuff! Also the masking of fret saw, the masking of frets below 12th fret for fallout fret leveling, and the cauls for fret press, that was a really good solution for us small businesses/hobbyist to make. Love this channel.

@picksalot1 Год назад

Bass looks good. I think it will look better without a pickguard. Love your fret press solution.

@familyengineering5591 Год назад

Good job dan. Progress is awesome. Cant wait to see a short scale 6 string prototype

@KingBespokeCreations Год назад

Great job Dan. I always hand cut fret slots after the radius, that way it isn’t deeper than it needs to be in the middle👍

@ATthemusician Год назад

I just finished the first neck I ever made and its a multiscale 7 string guitar, I made my template using FreeCAD Marz guitar to build a fretboard model and then converted it to SVG and printed it off. A miter saw would definitely be way better for doing the initial cut but doing it exclusively with a hand saw wasn't too terrible.

@Kyle_R_Wolfe Год назад

Just a thought but instead of drilling so deep for your fretmarker dots on the side of the neck. Why not drill really shallow holes and cut little pieces of the rods and put those in. You would save a lot of that fret dot rods if so. Pretty sure that's how they are normally done too.

@Kiobo7n7 Год назад

You get the fretboard and the truss road intact ir you use an iron (the one for the clothes) and a spatula, then you plain both and glue them back👌👌👌

@MrDaveKC Год назад

Wow, the neck is very interesting, and I can't wait to hear it when it's done. I also really enjoy your fret press! I never thought of doing it that way on the few necks I've needed to fret myself, but that's a really good (and cheap) idea! Interesting laser prototype. Again, looks like it gives a lot of ideas and flexibility, and I love putting the design inlay on the neck. So overall, that's just awesome, and looking forward to seeing and hearing the finished product.

@danielsgrunge Год назад

I’ve had this idea for the longest time but never actually pulled the trigger, awesome to see it Looks FANTASTIC!! Also, an easy way to remove a fretboard is with a dull knife, one that’s not thick but it’s dull (exact opposite of that chiesel, that’s why it broke). You can work your way up the fretboard with patience and it should come off very cleanly using a heatgun and being careful

@msbrech Год назад

I admire your skill, sir. Your ability to get creative and adapt never ceases to amaze me!

@jonclegg9169 Год назад

I usually use an iron to heat the board (better heat transfer), then use a putty knife or scraper to lift the board with the frets in. That chisel put too much strain on the FB for it to remain intact.

@GunsandGuitars Год назад

Thanks I’ll try that next time!

@freesk8 Год назад

Love your fret-press! Making it from a drill press is a great idea!

@accordv6er Год назад

You should do a kids guitar buildoff. I would love someone to do a neck toddlers who are interested in can actually reach. Maybe use a 3 string cigar box but get 6 in it?

@KeniWilliams Год назад

Hey cool using the drill press!

@jeffyoung8726 Год назад

I am always inspired to step up my game, when you do videos like this!

@RLDWEBER Год назад

A local old-school luthier uses a steamer he made, that has a needle like end on a hose. That with a combination of a clothing iron and wet rags, he gets fingerboards off in one piece!

@Kevin-nr9lj Год назад

This was fantastic. Can't wait to see it installed on the body

@forresthouser5807 Год назад

Thats a great combo for your own enjoyment...Can't wait to see it progress....

@martinheath5947 Год назад

Can't wait to see how this one works out and how it sounds!

@brandonrhodes9011 Год назад

An easier way to remove the fretboard is to use a cloth iron and a cake knife or the back of a flush cut saw. Heat with iron then slowly push the knife down the heated area. It’ll pop of real easy and the fretboard will be reusable when your done. I’ve used this method three times with great success to replace broken truss rods!

@GunsandGuitars Год назад

Awesome thanks for the tip! I’ll try that next time

@lvrxplt397 Год назад

try using a clothes iron on the fretboard... even heat all across the board

@RajorshiBhattacharyya Год назад

Dude this multiscale feature is a must have!

@hextray Год назад

Finally going into the weird/fanned/headless guitar madness, let's gooo !

@andrewlittlefield3425 Год назад

Wow! Dan you can do anything very well 😊

@JoeTheGuitarGuy96 Год назад

Dan, that neck looks amazing. I’m not usually into fan frets. This one does it for me. But those Double J Quad Rails, it’ll be interesting to hear how they sound on your prototype. Can’t wait to see that.

@KevTCC Год назад

Nice! In love that f hole on your bass. Also find that pickguard much better looking. I take the guards off of all my bases because I think they all look terrible. Dingwall has the only ones I tend to like. I could see myself leaving this one on.

@timchapin6482 Год назад

Great video buddy!! Oh, and great way to repurpose that “spray” bottle 😆😷

@troythompson1621 Год назад

Your bass looks to be my favorite design yet. I like the semi-hollow. On the quad coil, I like to keep things simple from an operators point of view, so could you have 4 3way switches to control each vertical pair of coils? Each switch could be selected for top, bottom, or both. That way you could just look and see what is on or off.

@ILKTTRZ Год назад

You just saved me like $60 on an arbor press. I'm running out of excuses to finish this kit build I've had sitting for 5 years now😅

@doc221978 Год назад

Removed that fretboard the hard way. A clothes iron resting on the frets gets the heat to transfer faster.... Takes me about 20 to 30 minutes, and most of the time the fretboard comes off intact.

@Emily_M81 Год назад

I was wondering why you were chopping off the end of the leveling beam until I saw the drill press. That's $65 saved over the Stew Mac fret caul, clever! My DIY project is at the routing stage and has been for months. Now I just need to take a router to it >_> I did recently redesign the body shape, though, and the neck is ready to go! My SRC6 I refinished in black (Minwax True Black) is about to be reassembled tonight! As I type this I'm hitting 24 hours for the dry time on the Rustoleum matte clear coat :D So, time to put it back together and reinstall the electronics! And then the Soviet Formanta bass... Projects, projects, projects. And I already have an idea for another after finding a short scale neck for $75 >_> Thanks for sharing! I'd be tempted to sacrifice a few frets if I could get 35" on the bass side somehow.

@GunsandGuitars Год назад

You might get 35” if you have the space to move your bridge back a little

@Emily_M81 Год назад

@@GunsandGuitars yeah, that makes sense. I occasionally find 35" scale 4-string necks on eBay or Reverb, but they're not common. Thanks!

@bevinmodrak4997 Год назад

Oooh, I want those pickups. Pair that with a low pass filter and you'd be in Wal territory....

@jameslewis2635 Год назад

I think the best way to fix a twist like that would be to pull all the frets and soak the neck in water. Then place the neck fretboard down onto a hard surface that will not bend such as a thick workbench (possibly with something like a couple of rulers you could tuck in each side to allow for the curvature of the fretboard) and clamp the neck down to said surface. Hopefully once the water dissapates the wood should settle in a straight configuration at which point you could release the clamps and install some new frets. That way you should be spending much less time doing the repair although the time taken to put the neck back into surface would be longer. That bass you are working on looks like it will be something I would want to own. The pickup looks very interesting, I bet you could do all sorts of interesting wiring with that. I am thinking P bass, reverse P, inline front and rear and that's only thinking of the one pickup. Trying to wire in all the options for a dual set has got to be a bit of a nightmare.

@ooinvsaoo Год назад

I’ve been looking for pickups that can do that WELL for a long time..

@zfxpedals Год назад

darnit Dan... now I have to look at a different laser. Honestly my Ortur is fine for what I'm doing currently, but that new one you have looks really nice

@jeffyoung8726 Год назад

Wow Dan, AMAZING!

@wjombat Год назад

You should do some research on how to do this. A thin spatula type tool will pry the board off at an angle that is not so severe. The chisel bends the wood past the breaking point. It is much easier and cheaper to learn from others mistakes than to make them again while reinventing the wheel.

@OlavSchneider Год назад

Can't wait for the next part.

@idiotburns Год назад

Well done sir! Nice workmanship

@shanefoster2861 Год назад

I got mine out in one piece quick too. I wish I could show you how. I feel like I owe you.

@peachmelba1000 Год назад

If you have an instrument with a standard bridge but you want to make a multiscale neck for it, and you don't want to be limited by the orientation of that standard bridge, simply set the parallel fret to something like 1000 in a good online fret calculator. The effect will be that the playing area has no parallel fret and the fan will get more and more subtle as the neck is traversed toward the higher register. See Strandberg guitars to visualize it better. Btw... This was a bit like watching someone cook a meal while really drunk. Pretty messy, but you got there lol

@ulfdanielsen6009 Год назад

Now all I need is to see you expand your Behemoth line into 5, 6 and maybe even 7- string or double-neck basses,- however way you´d come by the necks,- have them with fan frets and/or fretless and I´d be very interested in looking into having myself a custom built Dan Thompson Behemoth Special,- and have it shipped all the way to me here in Scandinavia.

@saulgoodeguitars Год назад

Awesome I was hoping for a video today Already know it’s going to be great work, so great work

@dkehrerproductions Год назад

Funny should mention the walnut blanks at Home Depot for a fret board . Its what I do . Just bought some yesterday .

@mrfatbobrider1969 Год назад

Hey Dan... Using ya drillpress is cool for the frets ... Using a scissor jack or something similar under the table of the drill press will make it a lot more stable and be able to apply more pressure if needed

@GunsandGuitars Год назад

Great idea!

@famitory Год назад

would love to see a guitar that looks fanned fret but isn't, all the frets, individual bridge saddles, and nut are just paralell at the same 15 degree angle.

@misinformationwithrandy Год назад

I love the Dan Thompson way!

@ffranklyspkn Год назад

I've seen video clips of guys using a clothes iron to remove fret boards

@mallninja9805 Год назад

Dude your home depot sells walnut? Mine has only pine, poplar, and red oak. I wish they'd carry some maple or walnut or something from time to time

@andropolisstudiomusic Год назад

Cool project! Great work!

@user-uy1ih3zn1e Год назад

You can get a guitar neck without fretboard, and plain fretboard at Ali.

@The..Butterfly..Effect Год назад

interesting - Thank you

@mmhmm88 Год назад

I have seen fret boards stripped using an iron, vs a heat gun.

@GunsandGuitars Год назад

Thanks I’ll try that next time

@x6x745 Год назад

please see a video how to remove a guitar neck fretboard ...thanks

@aaronkandlik Год назад

Was surprised that fretboard didn’t come off cleanly- I have done this a few times- used an iron…came off pretty easily. I wonder how it was glued down.

@GunsandGuitars Год назад

I wanted to try an iron but couldn’t find one, that could have been the issue. Might try it again with an iron if I can grab one cheap at a thrift store

@TheDeedeeFiles Год назад

Awesome

@neurocosm Год назад

I have some weird ideas for my behemoth neck LOL

@sackthevaulthunter8028 Год назад

Wouldn't you need a longer 1" neck length for the intonation?

@GunsandGuitars Год назад

Nope. It was a 34” 24 fret neck. I made it a 34.25-33.75” multiscale 24 fret. Just need to make sure my bridge saddles can move back ~1/8th on the low string, and forward ~1/8th” on the high string.

@nicolashrv Год назад

I got way better results using just 2 spatulas and going from the opposite side (since from the nut side, usually the fretboard is thinner due to the (d'oh) nut having a recess.....and no water needed at all, just a warm iron (the one for the clothes, nothing fanzy) and I applied it directly on the fretts, so the heat remains longer, and also applying heat directly to each spatula.....after struggling for 10min the first inch, eventually the spatulas started to move like into butter accross the neck (the chisel is way too thick and will cause what alredy happened here, which is to crack the fretboard...doing this work like this, I manage to remove the whole fretboard in a single piece, and the frets didn/t even came out, literally I can glue the freatboard in another neck if I want.

@BrileyNeyenhuis Год назад

Hi Dan, are you still using the basswood sheets from Hobby Lobby for your pickguards? I tried it for one of my builds, but was unsatisfied with the results. I found that Michaels sells 12”x5.25” sheets of PINE. I glued two together to make a pickguard. Not only does the grain look nicer, but it is significantly sturdier than the basswood. I highly recommend you try it

@GunsandGuitars Год назад

I never used basswood for pickguards. I use birch plywood. I use basswood to make shims.

@jeffreyeagen4896 Год назад

So the warping was from the fingerboard? Definitely would love to see a review on that new laser! It really has peaked my interest! Have you tried engraving gun slides yet?

@GunsandGuitars Год назад

I’ve been wanting to but I don’t think these laser can engrave steel. I might be wrong though!

@vanshankguitars Год назад

Just wanted to mention that the zero fret can and should be the same height as the rest of the frets.

@GunsandGuitars Год назад

I can always take it down a little if needed. Not as easy to go the other way!

@LukeShingoose Год назад

Most brands use a larger fret than the rest for the zero fret.

@vanshankguitars Год назад

@@LukeShingoose think about it for a second or two. Once you fret your B string at the first fret, is your first fret any higher than your second fret, and does it need to be higher?

@emilyscandycakes4530 Год назад

I have a beautiful musikraft birds eye maple neck new....where can I get a swamp ash strat body for it?...musikraft dont make bodies anymore

@LukeShingoose Год назад

@@vanshankguitars I think you need to think about it for a second because what you’re saying is wrong and matter of opinion. Like I said, a lot of manufacturers use taller frets than the rest for a zero fret, which is simply a fact. If you take a strandberg for example, a guitar that has thought and purpose behind every feature lists clearly on the site the fret sizes used and you can see that a the Boden bass uses a zero fret that is 0.006” taller than the rest. Sure you can make your guitars zero fret the same size as the other but to say that it’s the only way is completely different. It at best is a matter of opinion which isn’t the argument I was making. For that sake you can say zero frets are vastly inferior to an actual nut or whatever you want to argue.

@nugems6000 Год назад

Sickk

@bradleyclosson5042 Год назад

Dude just put a hot iron directly on the frets and move it around every few minutes to take off a fretboard.

@rjwhite907 Год назад

Why wouldn't you just use a flat iron on the fret board?

@GunsandGuitars Год назад

I don’t have one 🤷‍♂️

@redrider5118 Год назад

Totally off topic, but anyone know what’s up with thefretwire? It’s like the company went awol

@GunsandGuitars Год назад

Yes, the original owner sold it to an overseas company and it has gone to crap.

@redrider5118 Год назад

@@GunsandGuitars that’s so sad. There’s been this same as in Facebook and Instagram saying there offering 15% off. But all the comments are extremely negative saying they never got their orders but still had payments taken.

@mrz80 Год назад

You live in a part of the country where Home Cheapot sells maple and walnut? I hate you. :D Down here in FL all we get is red oak, poplar, and pine. **SIGH**