Тёмный
No video :(

Making a sharp 455 KC IF filter with 4 cheap single 455 KC ceramic filters schematic & demo (pt. 1) 

radiofun232
Подписаться 16 тыс.
Просмотров 2,9 тыс.
50% 1

How to make a simple IF amplifier in the 440 KC-470 KC range for (say) a radio. The video tells everything + gives the schematic & a demo about how to make a sharp 455 KC IF filter (or for whatever other electronic purpose) with a few cheap ceramic filters (normally used in remote controls) made for 455 KC. Could be also (say) 460 KC or whatever.
You can use here these “single” ceramic filters made to resonate on 440 KC, 450 KC, 455 KC, 460 KC in this electronic HF setup.
Talking about Richards radiochannel (Allamericanfive radio): his channel is here / allamericanfiveradio
Much information about radio technology there! Very valuable and unique information about tube technology is there, he also has a free book about tube technology.
Please note: at the moment (upload 21 november 2021) this electronic circuit (filter) has an extremely high output impedance. That is logical, because we look to the “open end” of a ceramic resonator. Such an “open end” (= extremely high impedance source) needs a high impedance input amplifier, like a tube grid or a FET Gate.
When you know something about electronics the term “impedance transformation” must be common. Though, in this case, the best idea to connect the output of that ceramic 455 KC (or whatever ceramic) filter on its resonance frequency will be via the grid of a tube (triode) or the Gate of a FET.
That will (thus) be in video 2 of the series in the future: a FET impedance transformer + (I think) a bipolar transistor that will amplify everything (= the IF signal to a good usable level for AM detection via a normal Germanium diode.
Part 1 of the series is here • Making a sharp 455 KC ...
Part 2 of the series is here • Making a sharp 455 KC ...
Part 3 of the series is here • The Grounded Emitter 1...
Part 4 of the series is here • Making a sharp IF filt...
By the way: the FET local oscillator that I am going to use (read: used, now, 21 nov. 2021, visible in this video) for this Long Wave Radio is here:
• FET test oscillator si...
The oscillator coil (visible in this video, now, is made to generate frequencies that are 455 KC apart from the frequencies on the long wave antenna coil, making the frequency transformation effective.
You can contact me via email when you have questions about my published circuits. I always ask for a picture of what you have made + a problem description; I ask to communicate.
My You Tube channel trailer is here: • Radiofun232 on RU-vid... When you search, search always “NEWEST FIRST” to get the right overview. You can also search via the “looking glass” on my Channel trailer via keywords like ”audio”, “radio”, “amplifier”, “filter”, “Shortwave”, “transistor”, “FET”, “oscillator”, “generator”, “switch”, “schmitt trigger” etc; so the electronic subject you are interested in.
My books about electronics & analog radio technology are available via the website of "LULU”, search for author “Ko Tilman” there.
www.lulu.com/s...
I keep all my YT videos constant actual, so the original video’s with the most recent information are always on RU-vid. Search there, and avoid my circuits that are republished, re-arranged, re-edited on other websites, giving not probable re-wiring, etc.
Some persons try to find gold via my circuits. I take distance from all these fake claims. I cannot help that these things happen. Upload 21 november 2021.

Опубликовано:

 

23 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 16   
@bblod4896
@bblod4896 2 года назад
The 455 kHz filters have three (or more) pins. One is input, the second is ground and the third is output. Thanks for the video.
@radiofun232
@radiofun232 2 года назад
Thanks Barry, I could not get them (the TOKO A50 Fw with the 5 pins) right. Tried to remove the double resonance peak on (say) 455 KC in all kinds of ways, did (too) many experiments to fix it without success. So I went to plan B (this option).
@wesamrabadi4457
@wesamrabadi4457 2 года назад
I would like to thank you for perfect published circuits .I design some of them and work well
@radiofun232
@radiofun232 2 года назад
I am very pleased to hear that they work well. I almost never get these kinds of comments, and it takes a lot of time to develop them in such a way that they can (almost) always work.
@Pwaak
@Pwaak 2 года назад
Very good Ko! Great idea of using Ferrite Rod for antenna!
@radiofun232
@radiofun232 2 года назад
Thanks Tony, yes I am going to work that idea out. Hope it will succeed. 21 nov 2021.
@RapperBC
@RapperBC 2 года назад
Nice to hear such kind words for Rick "AllAmericanFiveRadio" McWhorter. He is fantastic, as is his RU-vid Channel - ru-vid.com.
@radiofun232
@radiofun232 2 года назад
Yes, he is a very inspiring and professional person. Learned a lot from him.
@barrymayson2492
@barrymayson2492 2 года назад
If you parallel the resonates you can a bit more bandwidth. But I am sure you know that! Great video. I used to like playing with filter's mostly crystal ones though.
@radiofun232
@radiofun232 2 года назад
Thanks & yes, that is well known. In the first setup I had some TOKO filters (A50 Fw), but I could not get them working, spent many many hours with trying parallel capacitors with them. Only could get as a maximum result 2 resonance peaks with a (bad) "dip" somewhere in-between that 455 KC frequency band. Needs a lot of more experiments and elaboration to get them properly working. Will take time...Anyway, thanks, 22 nov. 2021.
@SeAfasia
@SeAfasia 2 года назад
Hi Ko... waiting next circuit....Dinos
@radiofun232
@radiofun232 2 года назад
Yes, hope it will succeed. HF and IF amplification will be critical.
@uwepolifka4583
@uwepolifka4583 2 года назад
Have these resonators at 455 kHz the highest impedance/resistance or the lowest. It would help me to understand the shematic. Thanks.
@radiofun232
@radiofun232 2 года назад
Thanks, good to hear that. Keep me informed or upload your results to YT, could be necessary and interesting for everyone.
@Oufg103f
@Oufg103f 2 года назад
👍
Далее
Help for the BFO-LESS
31:02
Просмотров 14 тыс.
Х.евая доставка 😂
00:23
Просмотров 549 тыс.
Cristiano ronaldo VS Tibo Inshape ! 😱😱
00:20
Просмотров 1,6 млн
#617 How to Design a Crystal Filter
28:53
Просмотров 22 тыс.
RESSONADOR CERÂMICO: APRENDA A TESTAR!
11:02
Просмотров 2,5 тыс.
Making a 455 KHZ IF CAN from Scratch Part 1
21:01
Просмотров 11 тыс.
Q-31 Part 9. IF amplifiers and IF filter
10:35
Просмотров 1,7 тыс.
#1005 455 kHz Resonator and Filter Teardown
4:47
Просмотров 3,5 тыс.