Making an Inset Bench Metal Folder/Brake

Подписаться 13 млн

Просмотров 3,9 млн

50% 1

To get a COLINFURZE MERCH click here
www.colinfurzeshop.com
So i have taken a grudge against my vice mounted metal folder which has just got in the way for to long and also the way it clamps in the vice like theres a bit missing so rather than moan i thought i'd make my own but make it inset so when i'm not using it its not in the way.......yes i know it's a fantastic idea.
Check out more amazing videos here
Epic Projects bit.ly/2qeC2XN
Crazy Inventions bit.ly/2aW8tjA
Epic Vehicles bit.ly/2aU9mMY
Film Gadgets bit.ly/2pDaudQ
I have a book for Kids who want to get into inventing Order your Copy Here smarturl.it/C-Furze
Social stuff here people
Twitter / colin_furze
Instagram / realcolinfurze
Facebook / colin-furze-5216807512...
Music
The 1st Track is called "Tempo" and is by "Husky Loops" more on them here alcopop.bandcamp.com/album/hu...
The 2nd Track is called "Caught and is by "10 To Go" more on them here
morningwoodrecords.bandcamp.c...
/ 10togopunkrock
3rd Track is called "Rat in a Maze" and is by "7Daze" more on them
here 7daze.bandcamp.com/album/black
4th track is called "All i need is to be Needed" and is by "The Ultraviolet" more on them here
theultravioletofficial.bandca...
In a band, want your music on my videos! Send your tracks to furzemail@yahoo.co.uk as all music on this channel is from viewer's

Авто/Мото

Опубликовано:

18 окт 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,1 тыс.

@colinfurze 6 лет назад

Really pleased with this as it's turned a tool that was useful but seemed to just be in the way to one thats on hand and blends in to the bench. Just another note that the RED KIDS SHOW is separate to the normal channel and thursday uploads will continue as the always have done so don't panic you don't have to have red to see my normal stuff.

@finley_read5463 6 лет назад

Say hi

@tobinee141 6 лет назад

colinfurze vietname

@cocospops9351 6 лет назад

colinfurze Hi furzey bear

@akshayacharya2895 6 лет назад

😍😍😘😘 From 🇮🇳🇮🇳🇮🇳🇮🇳🎃🎭

@jonscob301 6 лет назад

colinfurze how is ur hand

@ThisOldTony 6 лет назад

wonderful!

@numbasixx 3 года назад

This Old Tony probably best not to encourage him. 1. He might get too cocky and expend his 9th life. But more importantly... 2. Colin is very bad for my self esteem.

@LULU1422__ 3 года назад

hi tot

@zombiekillingskater 6 лет назад

Mr. Colin Furze, I'm a 21 year old film student in San Diego, USA. I come from a 'farming community' back home in Maryland, USA. Watching your videos makes me sane again whenever I'm stressed out during a film shoot or during midterms and finals in school. But this video, the 'how to make a tools one', was especially epic! It brought me back to the pure ingenuity of my family, friends, and neighbors back home. PLEASE, please make more of these videos, please. You're so full of talent, and I'd hate to see it go to waste in advertisement/cool (but over the top/show-style) inventions! There is absolutely nothing wrong with these videos, but don't forget to stick to your roots! PSA, I visited GB a few weeks ago, and it was *ducking* awesome!

@hnaja12 4 года назад

Put some recessed springs on the bolts under the clamp to lift the clamp automatically when the bolts are loosened. That'll make it easier to insert the workpiece.

@DanteYewToob 4 года назад

I like how most people probably assume Colin is joking when he says he's a "Tidy Person", but that is actually a pretty immaculate shop. For non-makers or builder types, it might look like a mess... but take my word for it. That is a beautiful, clean, and very functional shop. If you don't believe me, take a look at any older Diresta video and look at Jimmy's NYC shop! Google a few workshops and try to find a shop that's as functional, as well used, but also as clean and orderly as Colins. I have serious respect for Colin. Not just for his creativity and building skills, but for his respect for his workplace and tools and how he maintains a clean and effective work environment. Just the right amount of mess, just the right amount of chaos for inspiration! Way to go, Tidy Guy!

@kaptein1247 4 года назад

he has a lot of stuff. But no trash, dust etc its very tidy

@Iliketomakestuff 6 лет назад

Good stuff man! I got some ideas to make improvements on mine! Thanks for sharing!

@k.i.d4369 6 лет назад

I Like To Make Stuff hey love your vids

@Iliketomakestuff 6 лет назад

Thanks!

@benjyletouffu 6 лет назад

Hey Bob

@tijnvaneendenburg8846 6 лет назад

i like you

@n00bma5ter69 3 года назад

1:18 - "Alan's metal" cracks me up everytime

@meandoody678 6 лет назад

You should fit a protractor on each end so you can get closer to doing more precise folds and not just 90°

@thebigpicture2032 4 года назад

Once you’ve done a bunch of bends, you can eyeball it pretty easily.

@ShortyzProductionz 4 года назад

You have to go past 90° just the slightest amount due to the metal flexing. Let’s say if you went exactly to 90° then it may only be bent to 88°

@grumpofitzgerald4350 4 года назад

@Rayan Norval it varies from metal to metal and various thicknesses so it wouldn't make much difference

@ShortyzProductionz 4 года назад

Rayan Norval he’d need a different one for each thickness of each type of metal he’s bending

@milotorres6894 3 года назад

Combo square works for precision or make gauges for diff angles just slap on leaf or hold down..

@Frozty 6 лет назад

These are my absolute favorite types of videos. Making something that's super cool and practical. Shoot, if you just filmed yourself tidying up around the shed and making like storage solutions and what not, i would watch the crap out of that series.

@iwtommo 6 лет назад

Agreed, this style of vid is great. Sure, the hyperactive megabuilds are fun, but theres something about these which are spot on too.Also, 3:30 was hilarious

@JDeWittDIY 6 лет назад

Agreed!

@AndrewBone 6 лет назад

Put the top bit on springs, so as you loosen it it lifts itself up.

@JonHiddenColey 6 лет назад

Andrew Bone just what I was thinking!

@AdBul_ 6 лет назад

it would have to be inside the steel to have room to compress fully and still tightening to the steel

@garystinten9339 6 лет назад

Low&Slow Works perhaps smaller springs with a higher compression ratio.

@peterzingler6221 6 лет назад

Not the problem just drill ot the top section srews guide a bit to give the spring room

@wild14wayne 6 лет назад

Watched Collin for ages now still amazes me how how God of a engineer he is

@diesel8447 4 года назад

This just popped up in my suggested feed, very happy it did. Your a top craftsman lad!

@professorchronos6345 6 лет назад

Love the transition with the 360 Swing! Keep it up, Colin!

@gixerman01 6 лет назад

It’s crazy how much shop you got packed in there! This is one of my favorite videos of yours. I’ve been working on my shop for about 10 months now. I just picked up a 36in metal brake. I like seeing guys make their own tools. You have a high level of craftsmanship for guy in a small garage.

@briansargeant1949 4 года назад

Colins enthusiasm is infectious. What a happy camper. Weld on sir from upstate new york.

@radosawpodgorski487 6 лет назад

I absolutely adore the way you make your movies! Excellent sense of humour, interesting projects and fantastic workshop. I wish I had one like yours ;)

@MizzzKitty 5 лет назад

Bench metal folder, never going need my own but just finished watching making one for the last 12 minutes 😄... lol. Every video is awesome Colin. Thanks for the entertainment👍. Love from 🇨🇦✌.

@alandefa3686 6 лет назад

Hands off my metal

@trekkerenvrachtwagenspotte7200 6 лет назад

Alan Defa lol

@tims2188 3 года назад

dozens of clips out there showing home made items but first time view of this one. Love the sense of humor and different approach for a bench mounted brake. Nice having the right amount of tools and scrap around, coupled with a great presentation. Kudos!

@distracted6 6 лет назад

One of my favourite videos of yours in recent times. Would love to see more of this type of stuff

@jth1177 6 лет назад

I love building stuff but this guy inspires me to build more

@metlgandalf 5 лет назад

Nice job! Instead of the handle you want to mount on the back, you could simply just bore some holes to grap with your fingers to lift it up.

@malr8189 3 года назад

I have spent hours looking at videos on how to do the hinges. This is the only one that gives all the exact detail. Would love a workshop like his. Would even wear a tie!

@frankierzucekjr 4 года назад

You sir are absolutely brilliant and make everything you do look easy. Truly an inspiration

@samuelclark4525 6 лет назад

I've got to make myself one of these. That is a great idea. Time to put my powertig welder to good use.

@alainmoran8560 5 лет назад

Oi, that was my metal :D Please make more of these tool fabrication videos, the wacky ones are fun, but these are actively interesting.

@niklar55 5 лет назад

I've looked at a dozen or more benders, and yours is by far the neatest. One thing that made an impression, is that really thick angle etc. functions, thin stuff bends, but in the wrong places! The other was the hinge construction, very effective. Thanks.

@ChadNierenhausen 6 лет назад

Great build video, would be interested in seeing more like this! You can never go wrong when 7Daze is in the sound track.

@godfreypoon5148 6 лет назад

0:48 That's some *top cable* Colin has right there.

@user-hi3tx7lm3k 6 лет назад

Godfrey Poon 😂😂😂

@maxr.mamint8580 6 лет назад

thats for high voltage stuff. i saw a reel of bottom wire for low voltage in another vid of his. He can do it all.

@foxagri3316 6 лет назад

Godfrey Poon me too

@GLAKJack 6 лет назад

Stick a protractor on there, so you can see the angles and such.

@andries4561 6 лет назад

Hot Wine that's doesn't work because you always have to overbend a bit so it's a matter of practice

@venbrou 6 лет назад

Well what's stopping you from making a formula for each type of metal to calculate the amount of offset needed? Plug in the thickness and the desired angle, and the formula spits out the number of degrees that you need to overbend?

@benjaminlord7572 6 лет назад

It would still be useful if you were trying to do a weird angle bend like 17 or 83 degrees, as then you would have a reference point from which to start overbending. Although I'm not sure how often you need non 90 or 45 degree angles

@noiplah 6 лет назад

Would definitely watch more of these. Thanks Colin!

@DowneastThunderCreations 6 лет назад

Colin, you've shown outstanding fabrication skills, and you have an innovative mind. Aside from that, you're simply entertaining and very funny. You certainly brightened up my day! Thanks so much for producing this video.

@BadAls19 6 лет назад

Give back my metal

@EpicStuffMan1000 5 лет назад

looks like you and colin really fell out

@tairegaming5464 5 лет назад

its not yours it is myn

@someevilswan2314 3 года назад

Alan vs Alan There battle will be legendary

@LULU1422__ 3 года назад

nah its mine

@monktonlad 6 лет назад

Hi Colin, I like your tube notcher that you used in this project. Do you think that you could design an inexpensive one for everybody to make? I use a hole saw in my pillar drill but would like something that could just be vice mounted. Cheers.

@tk20111 5 лет назад

Thank u, one of ur videos kinda saved my ass in a project. Cheers

@thegamelegend7359 6 лет назад

We want old Colin back who brings huge innovations

@electronicsNmore 6 лет назад

Very nice!

@mt7680 2 года назад

Man 7 likes on a verified

@electronicsNmore 2 года назад

@@mt7680 I have countless comments that are in the thousands, even tens of thousands of likes, not every comment will be liked, and many get buried.

@markbrathwaite9671 6 лет назад

It always amazes me how much tools he has in his workshop

@lwx1 6 лет назад

Beautiful work! You are a true craftsperson.

@TibbsyTheUltimate 6 лет назад

I actually really enjoyed watching you make something totally normal for a change.

@SquareSquidStudios 6 лет назад

I'd say make a super easy and cheap lathe, but I know I wouldn't be able to make it. I need tools to make the tools I want to make XD

@SharkyMoto 6 лет назад

ive built my first lathe out of scrap steel, used an angle grinder, drill press and a cheap welder. i mean, could it build formula one engines? propably not, but it was more than good enough for first steps and propably for everything you will ever do in a home shop. "i dont have tools" is a very bad excuse, i mean if you have NO tools, it might be a problem but come on, drill press: 60$, angle grinder 20$ used mma welders are so dirt cheap too. 3 basic tools with those you can build pretty much everything, you just need the will and patience to do so.

@PeregrineBF 6 лет назад

David Gingery's books are the classic instruction sets for that. Very little needed in the way of tools, and no power tools are strictly necessary. gingerybookstore.com/ or Amazon. And once you've got the basic lathe built you can use it to improve itself.

@ArcanePath360 6 лет назад

There's plenty on YT for making tools with limited tools, such as turning a drill into a drill press. As you make tools you use these to make even more tools. Just putting a belt sander in a vice turns it into a bench sander. I made a table saw recently and all I had to buy was a circular saw. I used the saw to help make parts of it, strange as that sounds.... EG: I used a piece of wood and clamps to make a temporary fence which helped me to make a good square fence. So basically it built itself!

@RubSomefastOnIt 6 лет назад

not worth it. you would need a lathe in the first place to make anything worth using. you can find used lathes fairly cheaply. I got a 1946 logan 820 with lots of tooling for 600$. Dont bother building one if you actually want to do real lathe work with it. A decent lathe pays for itself very quickly taking odd jobs and repairing and making tools. The same goes for a mill, got mine very cheap. Now I am building myself a CNC pool cue lathe with them, thats only for cutting tapers and inlay engraving, but to get the spindle I machined anywhere even close to the proper run out had to be done on a lathe then ground.

@SharkyMoto 6 лет назад

not worth using? and cheap? sure, you can get a 1000 pound lathe "cheap" but if he doesnt have a shop already, where should he put it at? following the gingery books is a very nice, fun and rewarding way to build your own shop, you learn so much by doing this stuff and you become better and better

@Tekspert 6 лет назад

Yo yo yo it's furze time!!

@foxyfoxy5779 6 лет назад

Tekspert espak spanish?

@rafterL78 2 года назад

Been watching several videos on building a sheet metal brake. Your's is the tidyist, prettiest, and most inspiring quality work. High quality craftsmanship in the build and the video. Entertaining too. Thanks

@gilbus4989 4 года назад

Very solid piece of gear. Excellent idea the way you mounted it on the table.

@RWBHere 6 лет назад

0:31 had me in stitches, and wanting to watch more. Thanks Colin. Greets from somewhere near to distant Lincoln.

@jaapverhoeven873 6 лет назад

Please upload more 1 episode projects

@DWeezy62 5 лет назад

That's ridiculously excellent!

@BrilliantDesignOnline 6 лет назад

Colin- Slot the hold-down holes and add fixed vertical holes aft a bit with horizontal threaded stock to allow the hold down clamp to be adjusted in/out for variable bend radius. Absolutely BRILLIANT (as usual); I am totally going to build one of these! You rock!

@juliaverrier 6 лет назад

I like to make stuff anyone?

@dorupero 6 лет назад

Julia Verrier Nah...I like to make people do stuff

@matthewyoung917 6 лет назад

I thought that when I saw the thumbnail

@masterofnone 6 лет назад

Yes I do too

@scwfan08 6 лет назад

Julia Verrier Yep. Exactly what I thought.

@thedankoona_5854 6 лет назад

omg my thoughts exactly!

@nealphelps5260 6 лет назад

Make a motorized shopping cart! No one wants to shop AND push and walk.

@sergioramos3321 6 лет назад

Neal Phelps that would be so cool

@pngman4635 6 лет назад

Neal Phelps check out the channel "BoostedBoiz". He has built one/is building one.

@forevercomputing 6 лет назад

Neal Phelps trolley. Shopping trolley

@kevinstutzman515 6 лет назад

they have those at Walmart for elderly and disabled not lazy people

@drippingwax 6 лет назад

The lazy use them anyway.

@BrettsGarage 6 лет назад

Such a cool shed. Can't wait til I get mine.

@lendoggy2 5 лет назад

and I like the way you do stuff - really neat and professional.

@jonaskinner5273 6 лет назад

Try to fold a paper more than 8 times with it!

@George10001 6 лет назад

Mr C that escalated quickly

@robert9595 6 лет назад

myth busters did it 11 times.

@emeryshurpit8656 6 лет назад

Thats...not how it works

@attickid5681 5 лет назад

Hey you should make a Cnc machine you are awsome

@wrksnfx 5 лет назад

#colinfurze But only using an old commercial grade office printer parts (Craigslist) for the hardware except for the Dremel tool or router and electronics as low cost as possible. @colinfurze

@dirktroost5117 6 лет назад

These are my favourite videos of yours. Then ones were it's just good raw Colin making stuff!

@josephe3697 6 лет назад

Precision engineering, brilliant!

@ToadVh1 6 лет назад

Love this one, only thing i might do different is add springs to the bolts so it auto lifts when you untighten it.

@dejayrezme8617 6 лет назад

I've thought you could maybe make the screws "in reverse" so the nut is in the top part screwing up and down, and the bottom is fixed but can turn freely. That way when you screw them up there is a growing gap.

@ethelmini 6 лет назад

Better as it is so you can unscrew leaving a flat surface to clamp longer of folded bits of sheet on to form boxed corners etc. You could still make it lift, a couple of starlock washers being easiest.

@dejayrezme8617 6 лет назад

True. Did you mean rounded corners? Does this work if you'd put a pipe on the top?

@thetastefultoastie6077 6 лет назад

You have to be careful when bending teabags. It can somewhat warp the flavour.

@RobertSeviour1 6 лет назад

A drop of cutting fluid sorts that out.

@simontay4851 6 лет назад

Tea bag cutting fluid aka milk.

@1976fang 6 лет назад

TheTasteful Toastie ihi

@alioman26 4 года назад

Excellent workmanship

@lightwave73 4 года назад

excellent work thanks for sharing this project - can do so much with the right tools

@subzeros1451 6 лет назад

I thought of this the other day while at work. So, you know those little toy cars that when you pull them back a spring winds up and when you let go it shoots off? What if you were to take a real cheap car and try to make the same thing but full size? Highly a waste of time, but I believe it would be fun/funny to watch. Maybe make the exhaust shoot out flames or something.

@GLITCH_-.- 5 лет назад

IF the spring suddenly unwinds uncontrolled it will be mayhem. Total destruction. There's so much force in them. Just look at those tiny springs in garage door openers. They can already kill you.

@kareemashraf- 6 лет назад

The amount of drills he have thousands of them ......man a lot of drills

@7differential 6 лет назад

this is mad stuff !!!! definitly trying this tommorow thumbs up for the performance .

@_divinebeast_7168 5 лет назад

Thats one hella nice looking bench well done

@martin6123 5 лет назад

3:33 You're so funny! :D

@ohnoitisnt 3 года назад

this was properly funny

@RobinHilton22367 6 лет назад

At around 12mins you mention adding a handle, why not put a small spring on either side that would just raise the top piece by half a cm instead (to keep it looking streamlined)

@joeljustice9338 6 лет назад

Robin Hilt

@Pac0Master 5 лет назад

the idea is sound, but it may cause issues when tightening the sheet.

@joshuarosen6242 6 лет назад

I love the crazy inventions but this was an interesting variation on your usual stuff and I'd happily watch more like this.

@danielflores7724 6 лет назад

Nice shop , tools and talents

@pemmanissanka3748 6 лет назад

7:40 NEEEAAAWWWWWW

@peepeestorm2178 6 лет назад

the title and thumbnail made me think hes gonna build a folding bench that he carries around with him

@isaacmadhavan 5 лет назад

Superb! And so neatly done!

@luisjuantunari8227 5 лет назад

Exelente trabajo amigo me encanto saludos desde Argentina

@MichaelMacGyver 6 лет назад

Not hating on your regular videos but this was miles better than most of them, you showed the whole build and test in one video rather than cutting it up into two or three separate videos released over a week or two

@colinfurze 6 лет назад

its a small project but the ones i break up tend to be ones where the result is something loads of people would want to see but only a few want to see how it was made and you have to wait a week because those projects take ages to build.

@jonbraid2520 6 лет назад

After dinner Colin said to his wife "I'm just going to the shed to do a bender".

@Battle-Fab 6 лет назад

Love your personality!!! Great video. Great ideas for us hands on guys.

@radar2119 5 лет назад

Nice techniques, cool brake!

@mazenamged5096 6 лет назад

Why aren't u wearing ur shirt and tie today??😂

@bicky210 6 лет назад

Power Pom he finally gave it to the laundry 😂

@tobyfarman9733 6 лет назад

He wears it when trying out the inventions so they don't get destroyed when he's building it

@danodden9783 6 лет назад

I miss colins old music, the intense rock music...

@Despotic_Waffle 6 лет назад

Dan Odden colon? Lol

@thermmaloverload 6 лет назад

My colon makes music 😂

@joshuarosen6242 6 лет назад

I don't want to listen to a colon or the rock music.

@IvanOoze1990 6 лет назад

instead of a discography, its a colonoscopy

@danodden9783 6 лет назад

sorry bout that, it was autocorrect...

@1mrunforgetable 5 лет назад

Love it... keep building more DIY Tools...

@juanrolando2185 5 лет назад

Excelente trabajo amigo muy buena idea

@MajdSindi96 6 лет назад

Would it be useful if you put a protractor at the side of it?

@MrKaalman 6 лет назад

But what if you want to bend with a different radius?

@douglaspurcell4192 6 лет назад

make a bar to go under the sheet metal clamp bar and radius the edge 1/4 round to whatever radius you're looking to get, place it under the clamp and flush with the clamp face. if the metal is thin enough just router a radius on a hardboard edge and use that.

@hanvyj2 6 лет назад

Really like these kinds of build videos.

@udoetzberg7576 6 лет назад

You are crazy and a genius. And i like that. Go forward colin !!

@sunnyjeet4465 6 лет назад

Build a car for zombie apocalypse

@projectdn5 6 лет назад

Hey Colin, please please please could you try and get a collaboration with Guy martin, maybe you guys could build something to go head to head with each other in or on and make a mini series or something along those lines if you both have time, or even a small joint project, this would brake the internet and needs to happen :P

@razorwing7136 6 лет назад

projectdn5 Guy martin is main stream bro, colin is nothing to him (Jk colin you make him look like small fry) >:}

@darrenpowell7110 6 лет назад

Like make a baby or somerhing? Idk?

@projectdn5 6 лет назад

lol Can't it would get demonetized.

@paulsengupta971 6 лет назад

Enjoyed that, cheers Colin! Look forward to more.

@Faisal-ku6rq 6 лет назад

really pro editing video..not boring..fun and educational too..good job

@zerverin9235 6 лет назад

3:36 when the teacher asks why you didn’t do you homework.😂😂

@misellus3931 6 лет назад

wtf ur not wearing a tie

@baderrammal6537 6 лет назад

British first...Safety second

@selectronica6769 6 лет назад

You’re a Legend Colin !

@madcowrebel4216 5 лет назад

Big fan of Colin tool builds!

@billydab3189 6 лет назад

Make a multi tool with over 10 uses

@leonchekk9 6 лет назад

Who else spotted toilet brush behind the lathe at 0:48 ? O.o

@veronicahartmann1860 6 лет назад

want to see more like this, great job

@DaleHawkins 6 лет назад

Nice work, Colin.

@DaveSlaz 6 лет назад

FUCK RU-vid RED . . . OH WAIT A MINUTE !

@douglascharles6869 6 лет назад

can you make the Wolds biggest blowtorch?

@tobyfarman9733 6 лет назад

douglas charles yeah

@deathruddlesdeathruddles5438 5 лет назад

Obsessed with that 7daze track! Cheers Dr Colin

@LupusUmbra995 6 лет назад

Colin this video was GREAT. It had a good bit of the older feel to it. The quick transition shots of you working and goofing near the start were almost nostalgic. I absolutely love your channel but I miss a little of the old craziness. Keep up the amazing work and your unique editing style. You're an amazingly quirky person :D