No, problem * First enter "circle" command * Right click on your mouse button you will find "center" option select this option. * Now if you drag over the object then you will find a "green circle" in the center . Wherever you find the green circle just click " No need to go towards the center" _________________________________ * Other solutions is to make circle separately and then use "move" command and do the same steps.
Well, it is not big issue it always happen in cad. To join the profile uses these steps : 1. Make sure that there is no additional line in profile specialy at the corners of fillet. 2. Use different command to join as you can use both "Join" and "Region" command. Note: In my case when I try to use region command it fails but when I use join command the profile is join perfectly and may be in your case if you use join command first. Now try with region command may be this will work. 3. When you use array command make sure to uncheck the association option. 4. And finally my last tip is keep trying sometimes it is just a software problem. That's it keep following me in RU-vid. Any other problem just ask in comment I will reply definitely.👍👍👍
There are basically some thing to be considered that are : * If you are using the latest version (say 2019-2020) please make sure to uncheck the "associate" option. And in older version you can use first "explode" command to divide the lines individual then use join or region command *Also make sure that there is no extra lines *And finally recheck the profile is completely joined. 👍-------------best of luck----------------👍
