Making Raised Panels - Finish Carpentry 

You’re a great teacher. Thank you for just spelling it all out.

once again digging through your videos to figure out how to do the next thing that i've never done before ....and i find this. excellent as always - gives me the confidence that i can do something that is otherwise daunting. (BTW - looked at several other videos first - and yours is by far the clearest, providing the appropriate amount of detail). thanks richard

I have watched you install all different styles of molding you really know what your doing thanks.I have used your knowledge on my woodworking.

Really dig your videos. I have done construction for about 15 years, but never got a chance to really get into finish work,but it has always interested me! Love the videos.

Great video, it really helped me in several ways. Thanks.

thank you for keeping a high standard on production value i.e. the wind sock on mic i respect your gangster brotha

Your channel is great. Learning something everyday before I turn the light off for the night

You sir are a very fine tradesman the folk of Texas are lucky indeed to have such a conscientious craftsman . Good luck and I wish you continued prosperity your videos are inspiring and thoughtful bravo from an Englishman in France .

That’s pretty cool and another trip in the books

Thanks Richard! I really love your videos! You're definitely one of my favorites on YT!

Drone view rocked!

Absolutely Great Job as usual.No nonsense just what you need.

Great channel!!! thanks for sharing your skills

just picked up this CMT cabinet kit, set me back $371 plus tax, can't wait to use it. Thank you for the video, it is nice to see this type of work on job site and not in the workshop

I love your work and really enjoy watching your videos.

Still learning you are an excellent teacher

This guy is amazing .. Recently started watching his videos

Richard, Your videos are THE BEST! Thanks for sharing your knowledge.

Nice video Richard, Im in the process of making about 60 of these panels for the raised panel wainscoting in my house and even with a vacuum the mdf goes everywhere, i have been routing it out on the front driveway and you can see a film of mdf 4 houses down the road hahahahaha

I like this guy, he's always so chill. I think he smokes the ''special plant'' lol Idk he's always overly calm.

Amazing video as always. The production quality and knowledge that you pass on is second to none.

I like the full face respirator. I have a job installing 400 Kitchens on a three-man crew in a high-rise. My job is to install the valances and fillers which are made of a wrapped MDF. I haven't vacuumed and wear disposable face masks but the MDF is still brutal. I'm going to get one of those respirators this weekend

You're so AWESOME kid you make it so simple, so proud of you kid, I wish that I could meet you in person but that's just a dream but I'm so proud of you I know your parents are so proud of you keep doing a great job dog God bless you and your family don't never give up okay I love watching programs it's always good to learn from The Young generation peace be with you and your family God bless you bro and thank you for teaching a lot of people that they think they know

These are secrets that you are sharing. Love your videos, learned so much.

Very Well Done.. Thanks Bro

HI Richard, thanks for another of your great videos; just a suggestion, much as you put on the full face respirator, would you consider using some sort of dust extraction system (a vacuum cleaner perhaps) because it looks like the air around you is being seriously polluted - I'm thinking other people in the vicinity.....that innocent child playing in the back garden or rather riding their bike nearby...…that's the least I do when processing mdf outside. Mind, it is not 100% but it does contain a substantial portion of the carcinogenic stuff. kind regards

Thanks Richard for another great informative video. I can't wait to start my media room project. Any chance you can do a video designing and measuring a room for wainscoting especially walls that have multiple windows? Thanks again, keep up the great work.

Bro yall are awesome

Richard, please make a video on how you finish the routed edges to keep them from sucking up primer prior to painting a top coat.

You are a VERY GOOD teacher!

Nice Richard, that was a battery powered Rigid, I didn't see it in the link Thanks Frank from NYC

Thanks Richard! Another great video!

A true craftsman!!! Especially considering your age. Very well done! From a construction superintendent with 27 years experience.

맨날보니 엄청친한사이같네요 ㅋㅋ 저도 시골집을 수리하러갈건데 많은정보 감사하고있어요 ♡^^~

Hey Richard Great video I have them router bits they are great what about a video on how you paint the raw mdf thanks

Great video as usual, can you PLEASEEE make a video on how to properly prep and seal mdf edges?? Thanks

great job! Thanks!

Your the man Richard great video as usual !!! I hate working with mdf dust but it's a necessary evil. Way to be safe!!

0:54 When he opened the box I was overwhelmed and gave up.

Thats real classy work thanks for the video/

you probably know this, but the MDF at home stores is a whole lot more course and the edges lot harder to sand smooth than the cabinet grade MDF you buy at a place that sells cabinet material. hardwood incorporated Nashville tn.

When working with mdf and especially lacquers or other finishes with formaldehyde, make sure you have the right organic vapor cartridges that protect against it. Not all are made for protecting against certain carcinogens. 3m model 6005 is what I use. Stay safe everyone!

Ever used a table saw and router? Or block planes? I choose high powered fan(s) and / or shop vac used as a blower over the respirator. No knocks man you are fully a good man for taking the time to drop them pearls. IBCJ LOCAL 944

Great work man! I just came across to ur channel and have learned alot. You style is too the point and no ego. Keep it up. BTW my 9 year old loves it.

Awesome videos! Really appreciate the instructions.

Nice demo, great content as usual.

Good information, thanks for sharing!

Really like your videos. Great content and fantastic commentary. Keep them coming, I have learnt a lot from your videos.

Always good how to's from the master.

Another great video Richard, I have the same router table and router bits as you from sommerfeld tools

Man.. I gotta say... you are one of best finishers I've seen around... and I know you are young... so you definitely got a great future ahead of you... thanks for the tips... keep up your awesomeness.....

Good job. But you need to put a vacuum on that vacuum attachment on the back of the table, that will take care of a lot of the dust.

Awesome! I wondered how that was done.

If i wasnt broke and homeless id hire u !

Awesome video!!

Its so pretty!!

Using Sommerfeld set up is the easiest and strongest cabinets and doors there is.

Nice video. Thank you! You have a lot of nice toys ;-) May be you have to treat yourself with truck saw you will love it. It took a lot of convincing myself before I got one but i never regret it.

Excellent tutorials keep it up!!!

i am curious the bit you use cuts into the back of the panel. i understand that if your using it for doors as it fits into a frame but when you use it on walls does it not leave a gap around the perimeter of the board between the wall and the panel. i am always looking to up my wood working skills and i appreciate your videos. thanks

Awesome stuff 👌

Thank you so much

Thanks for video. Can this be done using 1/4” shank router?

Great video!

Hey guys quick question would this work with 1/2 inch MDF? I noticed your using 3/4...thanks for the tip

Wow, that is removing a lot of material in one pass. It would be interesting to learn how you prepare and paint that extended exposed edge of the MDF. Cheers, David.

So if you are using those panels for wainscoting could you just leave the back cutter off since your molding will just sit on top and not really going to fit over the edge like it would in a cabinet door? I like your work and want to start my staircase soon. Thanks for the instruction.

Keep up the great videos!

Great MDF 'explosions', Richard; what an eye opener for breathing safety! Say, If you replaced that black sliding material on the fence face, on the in-feed side, with a sacrificial material, and ran the bit through it, it makes a zero-clearance between your bit and the indeed-side fence which gives much better support to your workpiece. Not so big a deal in this case but on more delicate trims it could save you some tear-out frustration. Great, great vids.

Man another great video. I was going to ask about the raised panel inserts on that sexy accent wall you did. It almost looks like 1” mdf, but I think it’s just that profile

Thank you !

I love your videos. I thank you so much Ford informing and teaching me. You are my sensei! Keep up the good work my friend and I will be watching your progression...

Great vid 👍🏻👍🏻

Hello I always watch your channel You are a creative and ingenious person I like you so much I am from Algeria I did not find it in my country table routerand bits Can you help me with that?

Amazing

Love the look. What is the thickness of the mdf you are using here??

Great job,!

Make sure and not raise or lower the bit after your first pass if you are making raised panel doors - the backcutter on the raised panel bit will shave down the size of the tongue that goes into the rails and stiles. Rather, adjust the fence in or out if you want to make multiple passes, which is generally what you want to do, particularly if you don't have a powerful router motor.

Totally excellent video. Thank you. I have a Porter Cable model 1001 router. It’s 1 - 3/4 h.p. Do you know if it’s capable of handling these size router bits.??

Good Stuff !! But I always use some kind of dust collection with my router table, Festool,shop vac, plus the full face mask....live to work and play another day :)

Hey Richard really like your video's. Can I ask how you paint your crowns. Do you spray? What do you do if the customer has stipple or textured ceilings? How would someone go about masking off the crown for paint?

Every time I see your logo on your shirt I think of car subs ☺️ great video as always 👍🏽👍🏽

Great vid

I had my dw618 router variable speed,but I am not sure in what velocity work with. It has 1 to 6 . what would you say is better for pine wood

What do you do about the gap on the backside of the panel if it doesn't fit in to a female end. Doesn't it just leave a gap between the panel and the wall?

Not sure if you still see comments on this video but how is that Freud bit holding up with shaping mdf as far as sharpness goes? I just purchased one to do raised panel wainscot floor to ceiling as an accent wall. I’m curious if I’ll ruin this thing by running a lot of mdf through it.

We dont take the time for this in the netherlands, but i love your work en i al aperently stil learning. Keep it going a dutch fan💪🏻

It is great to work outside making dust.

What is the benefit of using mdf verses plywood

Do you normally use a track saw for your angles cuts? They are great for custom jobs and give such a clean and fast cut.

MDF MAN KILLER

I like big bits, and I cannot lie.

I wanna by the table like u have on video give the name and where I can by

maybe set up fan, and use off-on foot pedal fr HF.

It’s easy for you

Is the surface of the router cuts smooth enough to paint immediately or do they require filling and sanding first? Great videos and selection of topics!

Respect.

Hey there, nice video. Do you find that MDF makes your bits dull or has that not been a problem?

your router looks like little underpowered for this size of the bit. I would go with solid 3HP. Also doing it outside I would still plug in portable dust collector. Good Job man!!!

Do you like the Somerfield bits or the Freud bits better for the raised panels?