Тёмный

Making The PS2 Slim Better Than A PS2 Phat 

Macho Nacho Productions
Подписаться 248 тыс.
Просмотров 655 тыс.
50% 1

In 2023, This May Be The Best Way To Load Games On A Slim PS2
Use this link to SAVE $5 on your first order at PCBWay: pcbway.com/g/A311e7
Ever wanted to have a real internal hard drive in you Slim PS2? Well this mod from Gusse is your answer!
// PS2 Slim Hard Drive Parts Needed:
► Gusse’s Retro Store: gusse.in/
► IDE Resurrector Ribbon: gusse.in/shop/ps2-modding-par...
► IDE to SD Card Adaptor: amzn.to/3mm6NrS
► MicroSD Card PCB: amzn.to/3ZuaKZE
► 128GB microSD Card: amzn.to/3ZzQBkK
► 3D Printed Nuts and Spacers: gusse.in/ps2-modchip-diagram-...
► HDL Software: www.psx-place.com/resources/h...
// Support Macho Nacho:
► PATREON: / machonachoproduction
► MERCH: macho-nacho.com/shop/
► WEBSITE: macho-nacho.com/
► JOIN our DISCORD Community: / discord
// Follow Me On Social Media
► Instagram: / machonachoproductions
► Facebook: / machonachoproductions
► Twitter: / machonachomedia
---
Timestamps
0:00 Intro
3:07 Parts Needed
4:58 IDE PS2 Slim Tutorial
20:24 Features
21:51 Pros and Cons
-----
// SAVE MONEY at these Retro Modding Stores! (Affiliate Links Below):
► SAVE 10% by using COUPON CODE: TITO on any purchase from RETRO GAME: TITO on any purchase from RETRO GAME REPAIR SHOP here: retrogamerepairshop.com/?ref=...
► SAVE 5% by using COUPON CODE: MACHONACHO on any purchase from RETRO MODDING here: bit.ly/39hHnz7
// TOOLS AND GEAR I Use For Video Game Console Modding (Soldering Equipment, Flux, Kapton Tape etc) (Affiliate Link):
►SRA Flux Pen: amzn.to/2CmPX4U
►Circuit Board Holder - amzn.to/2zV7VuC
►28 AWG gauge wire: amzn.to/2Ni1V22
►Wire Stripper/Cutter: amzn.to/3hQ7fb2
►Silicone Mat for soldering: amzn.to/314rc88
►Kapton Tape: amzn.to/3xFk4wp
►iFixit Toolkit I use for all my projects: amzn.to/2CnJEOt - Everything you need!
►Hakko FR-301 Desolder Gun: amzn.to/2E8P2X3
►All other stuff I use: www.amazon.com/shop/machonacho...
-----
// MY VIDEO and AUDIO Equipment (Amazon Affiliate Links):
-Sony A6500 Camera - amzn.to/39FSxQa
-My Absolute Favorite Lens - amzn.to/308Zm9O
-Zoom H4N Audio Recorder - amzn.to/2CR5LxF
-Aston Origin Microphone - amzn.to/3hPnap0
-Atomos Ninja V External Recorder - amzn.to/3fcq3i6
-----
// These stores provide fantastic Gear and Mods for Retro Consoles! If you use the following links below, I received a small percentage from sales at no cost to you. This is a great, free way to support the channel!
○ Retro Game Repair Shor (Tons of Game Boy Mods)
► retrogamerepairshop.com/?ref=...
○ Retro Modding (Lots of Handheld Console Mods)
► bit.ly/39hHnz7
○ Stone Age Gamer (Flash Carts and other great Retro Tech)
► stoneagegamer.com?afmc=MACHONACHO
○ eBay (Second Hand Retro Gaming Gear and More. It’s where I buy a lot of the consoles I mod!)
► ebay.us/NCwNkl
○ Sendico (Proxy Service to bid on Japanese Auctions. I use Sendico to get great deals on Retro Consoles directly from Japan!)
► sendico.com/referral/MachoNacho
-----
// Intro Music for Retro Renew Series by Matthew McCheskey:
► matthewmccheskey.bandcamp.com/
-----
Disclaimer: This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not Macho Nacho Productions or Tito Perez. If you are uncertain about any step of the process or feel unsure about your skill level, seek a more authoritative source.
Affiliate Disclosure: I get a small percentage of each sale that uses an affiliate link or coupon code. It’s a great way to help SUPPORT my channel at no cost to you so I can continue to make these videos for all of you, everyone wins! And as always, thank you for your continued support of my channel!
#PlayStation2 #Sony #MachoNachoProductions

Игры

Опубликовано:

 

16 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 978   
@Bendilin
@Bendilin Год назад
One of my favourite things about this channel is learning just how many different variants there are of the same console model due to the internal parts slightly changing. Even the original GameBoy Advance had two different models.
@zappingdumondeanimal2925
@zappingdumondeanimal2925 Год назад
Two différent model ?
@MachoNachoProductions
@MachoNachoProductions Год назад
I’m glad I could show you some of the variants for these consoles! It’s crazy how many there are and how different can be.
@Bendilin
@Bendilin Год назад
@@zappingdumondeanimal2925 They have two different GBA models, the only difference I know of is that the screen's ribbon cable has two different amounts of pins (one has 40 pins, the other has 32 pins). It's only necessary knowledge if you plan to swap your og GBA's screen.
@El_IsraPS2
@El_IsraPS2 Год назад
@@MachoNachoProductions the 70k model is an interesting example of that There are 3 variations
@MarbleThumbs
@MarbleThumbs Год назад
Yup, I mashed together a working PS4 from several broken ones and quickly learned there are so many variants that are different internally but not externally, with alot of sanding I got it all to fit together nicely.
@Daniel-it1dp
@Daniel-it1dp Год назад
Man, these solder points of these mods get smaller and smaller in your videos 😲. Bravo to developing your skills! Also, I love the wire routing you did...very nice.
@MachoNachoProductions
@MachoNachoProductions Год назад
Thanks Daniel! I have definitely gotten better at soldering over the years.
@meeyou3128
@meeyou3128 6 месяцев назад
can i just ship you my ps2?
@ssj99gohanisthebest48
@ssj99gohanisthebest48 Год назад
My 20 year old PS2 slim: “I can be like big bro?!” Great work on the video!
@MachoNachoProductions
@MachoNachoProductions Год назад
Haha true! It can be just like big bro now 😁
@hugevibez
@hugevibez Год назад
I've been thinking about doing this HDD mod for a while now, so this flex cable is a godsend. Your implementation with the microSD card is really sleek, and by chance I happen to have to same IDE to SD card adapter so will definitely give it a go
@Boredealis
@Boredealis Год назад
Man I just love that Cable Management, and the crisp solder joints! Keep up the good work Tito!
@l00tur
@l00tur Год назад
Tito if you haven't heard it yet, you're an animal! You're all over the retro console spectrum bringing attention to some of the most unique modifications available to our beloved childhood consoles. To say you've really developed this channel into a mainstay doesn't begin to describe the overall success it's encapsulated. I know other channels have existed to bring similar content, but your video editing skills have made the content easily digestible for a wide audience. I genuinely look forward to your videos. Thanks for what you do!
@WhatAboutZoidberg
@WhatAboutZoidberg Год назад
Thats some sweet sweet cable management pron. Well done. Looks sleek and probably the nicest slim mod now. Don't use my ps2 since I got my deck but I still REALLY want to do this mod for fun. Looks like a nice challenge.
@ratykat
@ratykat Год назад
Unbelievable work, nicely done! Thanks for another brilliant video Tito, hope you're well!
@xboxmods
@xboxmods Год назад
Might have finally found a mod I’m not comfortable installing on this channel 😂. Really impressive work with the cable management!
@laura9x64
@laura9x64 Год назад
ohhh! ive always wanted to do this, great to see theres finally an accessible flex cable version of the mod!!
@boomer-nomad
@boomer-nomad Год назад
I've tried to do this mod couple of years ago but ended up without any luck and a slipped resistors array (which I've fixed eventually). Now with this ribbon cable, better soldering gear and gained experience I want to give it another try. Thanks for inspiration!
@RaverRacer
@RaverRacer 3 месяца назад
Did it work?
@boomer-nomad
@boomer-nomad 3 месяца назад
@@RaverRacer haven't done it yet
@SeveredLegs
@SeveredLegs Год назад
Hard to imagine many people taking the time to do this mod. But it is pretty cool that someone figured it all out.
@hydraciano
@hydraciano 3 месяца назад
That's my new goal in life.
@noonethatspecial
@noonethatspecial Год назад
Great video as always! Have you ever considered making a "Where are they now?" video? In where you showcase how some of your older mod units have held up after a year or two of use.
@hawkfeather6802
@hawkfeather6802 Год назад
That's amazing! The wire management looks very professional. The mods just keep getting better.
@haloslayer255
@haloslayer255 Год назад
Nice work Tito! Big shoutout to Gusse, I've installed this twice and just need the third one installed. I have two more coming in the post soon. Love these modifications. Cheers!
@MrBoop4345
@MrBoop4345 Год назад
What a great time we live in. So many awesome mods coming out lately that really help out modders to slim down the time and cleanliness of the install. Great video as always Tito. Keep em coming!
@ps4games164
@ps4games164 Год назад
Not really. It's 2023. WW3 is possible and EU approved bugs for food.
@emceebois
@emceebois Год назад
A SATA adapter that accepts USB drives would make this mod the ULTIMATE way to portablize the PS2. Very advanced stuff, but also insanely cool. Congrats to the mod maker and thanks to you for another excellent video.
@omarghionecuppi3194
@omarghionecuppi3194 Год назад
I did that a few years ago, i removed the dvd assembly to make room and used a mini router with SMB support. Solder the the lan ports, cut the traces of a frontal USB and solder to the router. I use a external disk in opl. Very clean.
@solidsnakeandgrayfox
@solidsnakeandgrayfox Год назад
​@omarghionecuppi3194 are you limited by the usb speed?
@emceebois
@emceebois Год назад
@@solidsnakeandgrayfox The USB ports on the PS2 itself are USB 1.1, which causes stuttering when loading some cutscenes in some games when run from OPL. If a faster USB standard (2 or 3) could be used to attach a USB mass storage device with higher speeds, then that wouldn't be a limitation.
@solidsnakeandgrayfox
@solidsnakeandgrayfox Год назад
@@emceebois ahhhhh
@omarghionecuppi3194
@omarghionecuppi3194 Год назад
@@solidsnakeandgrayfox It works perfectly, because the usb port is managed by the router and shares it via SMB with the LAN port of the PS2, resulting in a higher speed and with an HDD in NTFS format, so you can use ISOS larger than 4GB.
@thegametinkerer
@thegametinkerer Год назад
This is an amazing mod. You made it looks so good. And the led relocation and sd card was perfect.
@Falcnuts
@Falcnuts Год назад
One thing I love is how you always are showing new ways to mod consoles, I love loading games over Ethernet on my slim but this seems like a fun project
@El_IsraPS2
@El_IsraPS2 Год назад
20:50 although the connection is the same, the 70k is not equivalent functionality-wise to a expansion bay model Sony removed the HDD drivers from on board ROM. Wich essentially makes the 70k behave the same as a PCMCIA model, aka: *SCPH-1X000* To put it simple: it won't autonomously boot the HDD MBR program, it requires a bootloader on the memory card. Fortunately, FreeMcBoot has a secret feature to do the MBR booting on its own, it just requires pasting 3 .irx drivers into the corresponding system update folder
@El_IsraPS2
@El_IsraPS2 Год назад
What are the advantages of booting off the MBR program? The HDD filesystem and S.M.A.R.T status are super quickly checked each boot if the MBR program supports it And this allows running FreeHdBoot, HDD-OSD and even PSBBN!!!
@notkyloren
@notkyloren Год назад
I've been waiting for this. I have an SSD modded Phat PS2, but also a Slim 7000 series. I've seen IDE mods for it, but it's been virtually impossible to find one actually for sale.
@byt3swap375
@byt3swap375 8 месяцев назад
I did this mod a while ago before the QSB was available, and have been frustrated by the 128GB limit due to the missing LBA48 support on the adapter. I looked around for adapters with support for a while with LBA48 support and had no luck. However, tonight I remembered the iflash CF -> SD card adapters for replacing the mini IDE hard drives in old iPods. Ordered some tonight and am going to try to redo my slim with that. From what I understand those adapters are completely compatible with the IDE spec and should support much larger SD cards. Keeping fingers crossed, should be a fun experiment and I haven't seen anyone attempt to do this mod this way.
@loqloqloqloqloqloqloqlo
@loqloqloqloqloqloqloqlo 6 месяцев назад
Did you do it? I'm willing to try this mod
@byt3swap375
@byt3swap375 5 месяцев назад
@@loqloqloqloqloqloqloqlo I didn't have any luck with the flash cf-> sd adapter unfortunately
@darenn-keller
@darenn-keller Год назад
This is so cool! After modding my fat PS2 using your tutorial I was actually discussing on our discord how it could be done on a ps2 slim using the IDE pins. And here you, Tito not disappointing as always. 😊
@Linecker1805
@Linecker1805 Год назад
Not even Gusse made a video about the ps2 slim hdd mod like that, Tito is the GOAT, I was waiting for this video coming from your Chanel! Good job 👏🏻
@Vykrex
@Vykrex Год назад
Love it as always. It's literally the morning ritual for my kids and I before school!
@MachoNachoProductions
@MachoNachoProductions Год назад
Awesome! So glad I can be a part of your morning!!
@GatorRay
@GatorRay Год назад
Forgot to say this last week. BUT congrats on finally being able to rent your own filming location for videos. Even if these things aren't stuff I can do myself. I love seeing how they come together.
@doafan455
@doafan455 Год назад
I didn’t paid attention to work today but here I am paying as much attention and almost taking notes like never before, am listening and learning 😊
@bitcrush
@bitcrush Год назад
I've seen this ide mod for the slim before but this flex ribbon just makes it a lot simpler!
@FaSMaN
@FaSMaN Год назад
Like you mentioned this was originally a mod discovered by a user over at psx-scene , it required a lot of wires and cutting into a IDE cable, later a Chinese manufacturer started making them on two flex cables and included a replacement bottom cover for the PS2 and a 12/5v power supply , it could take any 3.5" IDE hard drives, there was some bugs with the original software too but can't remember them as it was years since I last fitted one , we only ever got about a dozen of them before they disappeared off the market. Some things to consider with the SCPH-7000x it's not recommended to install a mod chip(modbo 4 , Matrix infinity etc...) in them in my book , the mechacon on these are notoriousfor crashing and killing the laser coils, only protection that worked about 80% of the time was the sub-zero mod, or the resistor mod, don't use the diodes that come with chips they are useless, I stopped doing that model console because of that.
@haloslayer255
@haloslayer255 Год назад
Have you tried using the matrix pic or comsoft v4 fix?
@bloeckmoep
@bloeckmoep Год назад
Ughhh, yeah somewhere back in my head something started screaming LA65 something..... so nope, no moded slim for me. I got some 9000s slims via network injection and two reliable 30000s with standard hd drive adapters. Everything in between that transgression period from fat to slim is kinda shady, buggy or faulty (v9, v10, v12, v13)...
@dudemaster8575
@dudemaster8575 Год назад
Maybe that's why i have already 2 dead laser in my 7000*. Do i need a mod chip for using this mod or i can just uninstall?
@satibel
@satibel Год назад
Tbh freemcboot is good enough imo
@OnTheEdgex23
@OnTheEdgex23 Год назад
@@haloslayer255 the matrix fix mod is legit imo. The comsoft mod adds extra shit that doesn’t do anything
@ReggaeRootsoficial
@ReggaeRootsoficial Год назад
Um dos mais belos trabalhos que vi no yt. Espetacular!!! Abraços do brasil !!!
@sergiolopes3417
@sergiolopes3417 Год назад
Your soldering skills are amazing, man. All your job works good and in the finest aesthetics. And, you said clearly which every thin cable on the Gus's cable management fits perfectly, but your job isn't losing for hims.
@dave8826
@dave8826 Год назад
I love this channel, congrats Tito! 39 euros + shipping for a ribbon is way too much, let's hope the price comes down in the future
@Ucfhm
@Ucfhm Год назад
Great video, i will start looking for that model!! keep up the good work!!
@MachoNachoProductions
@MachoNachoProductions Год назад
Will do! Thanks Youssef!
@killersagetv6059
@killersagetv6059 Год назад
2023 and yet making ps2 mod videos, man I love this channel pls provide more ps2 content
@Cain532.
@Cain532. Год назад
I love your videos man. Super concise and very professional! If I get some spare income I will definitely try this mod out. Thank you!!
@WickedGamerCollector
@WickedGamerCollector Год назад
This is one awesome mod to do indeed. Find it just really relaxing watching you modding 😅
@MachoNachoProductions
@MachoNachoProductions Год назад
Thank you!
@IngwiePhoenix
@IngwiePhoenix Год назад
This, plus the mod where you hacksaw off the DVD portion, is basically my dream PS2.
@jbtwo7n
@jbtwo7n Год назад
Unfortunately, that mod only works on 79000x PS2s (because they cut off the IDE functionality). But if they ever find a way to combine the two, it'll be crazy.
@draconic5129
@draconic5129 Год назад
@@jbtwo7n theoretically it should be possible, I heard about a very old mod that adds back hard drive functionality for later 75000 units, though it is significantly more complicated than the mod shown here since it doesn't just tap into the IDE circuitry they had to actually rebuild and reimplement the IDE circuitry with a modchip, I believe it also required its own special loader software. Similar to the original IDE Flex cable mod this one wasn't very popular due to low availability, though it seems to be even less popular and even less well-known about then that original IDE flex cable mod for the 70000 units.
@__-ni1kz
@__-ni1kz Год назад
FINALLY. I’ve been waiting so long for an optimal way to digitize my collection on a slim console. Thanks Tito! You should a video with this flex cable where you remove the disc drive and put an HDD in that space.
@AMD2600
@AMD2600 9 месяцев назад
How the SD card just perfectly fits through the vent is just amazing.
@Clockwork_Enby
@Clockwork_Enby Год назад
beautiful wire management !
@MachoNachoProductions
@MachoNachoProductions Год назад
Thank you 🙏
@mogwai_for_sale
@mogwai_for_sale Год назад
wow! it is unfortunate just how complex this mod is. the 128GB storage limit is definitely a big con with the sd card. i currently have two 2TB drives setup on a fat ps2 totaling about 1000 games and i couldn't be happier with the flexibility that provides. regardless, i never thought it would be possible to install a ssd or sd card adapter into a slim ps2 so this is very impressive!
@draconic5129
@draconic5129 Год назад
I'm not sure if that limit is actually a hard limit or is just a limit that they put on the specs page on Amazon, 128gb is a bit of a weird capacity to cap at since other cases like 2, 4, or 32GB caps are based on memory allocation or file systems but 128gb just seems like they put the largest available SD size at the current time (lots of these adopters are of an older design) and it's not actually a real limit but rather the largest available card at the time it was designed, similar to how my old Samsung phone says it only takes up to 64GB cards because there weren't larger one's available when it was made but in reality the phone can likely take up to 2TB (because of MBR partition limit, though I've only gone up to 256GB since 512 cards were and still are a bit pricey).
@HalianTheProtogen
@HalianTheProtogen Год назад
@@draconic5129 the PS2 uses 28-bit LBA to address files on the hard drive, so it's limited to 137 GB.
@draconic5129
@draconic5129 Год назад
@@HalianTheProtogen really? If that's the case then how are people putting 1TB hard drives in their PS2 and using all that capacity?
@makere
@makere Год назад
@@HalianTheProtogen You can format them with 48bit by sacrificing some compatibility to get 2TB drives.
@HalianTheProtogen
@HalianTheProtogen Год назад
@@draconic5129 see above.
@ivan55227
@ivan55227 Год назад
This awesome. I'd only wish this ribbon cable would not cost like a 3x ps2 slims on a used market.
@hardkore360
@hardkore360 3 месяца назад
😂😂😂😂
@3v068
@3v068 Год назад
The same song every video. So simple, yet so calming to listen to when watching these. Love it.
@keepwatchingthat
@keepwatchingthat Год назад
Why was I not notified about this video smh. These videos are always a banger. Keep up the hard work Tito!
@MachoNachoProductions
@MachoNachoProductions Год назад
Thanks Nickolas! RU-vid works I’m mysterious ways. They don’t notify as much as they used to
@The_Unpunished
@The_Unpunished Год назад
Nice mod! Although you could've probably simplified it if you used an SD Card extension cable instead. This is superbly clean though.
@tigheklory
@tigheklory Год назад
Great video as always Tito. Love the Turbo Express in the background. I would love to see you bring some attention to the Colecovison modscene.
@Danny.._
@Danny.._ Год назад
i know from experience this is very difficult soldering, but you make it look so easy!
@MachoNachoProductions
@MachoNachoProductions Год назад
It’s definitely challenging
@Gusse
@Gusse Год назад
Thank you very much Tito for your great work! the work you have done is impressive! the video is of a huge quality! ultra educational, we keep in touch for a future project 😉
@ModzvilleUSA
@ModzvilleUSA Год назад
Beautiful work brotha! I manually wired one of these recently, never again lol. The flex makes it so much more reasonable. The issue with the the IDE to SD card pcbs is that they only support a max of 128gb. I've been meaning to try one of those m2 sata adapters to see if I can get a 1tb working.
@dcfuksurmom
@dcfuksurmom Год назад
Yeah I was thinking that limit didn't sound right, usually the "limit" on something like that is just the highest they tested with (at least in stuff I've seen), gotta wonder if it would actually accept a higher capacity.
@ModzvilleUSA
@ModzvilleUSA Год назад
@@dcfuksurmom It’s a limit on the ide to Sd adapters. I’ve heard tale of sds getting corrupted. I haven’t done too much testing personally though. If you want over 128gb you might need something a bit less elegant. M2 sata ssd would be a pain to access but should fit on the bottom of the board just fine.
@ArchGeek
@ArchGeek Год назад
Beautiful and clean work my friend, as always.
@ISAK.M
@ISAK.M Год назад
I have wanted to do this since literally 2019 but I havent looked it up any more up until right now and to my surprise not only 1 but 2 YT channels uploaded a video 1 month ago wow this is just perfectly timed.
@RisingAnthony
@RisingAnthony Год назад
Soldering on to the resistors from the bottom side was very difficult, I ended up lifting a pad from the QSB and having to wire directly from a resistor to the IDE pin. My recommendation is to use braided bare wire to make that connection, since flux'd solder will have a very hard time bridging that small gap. That did the job for me, and though my cable management is not nearly as pretty, I was able to follow along. Thanks a lot, Tito!
@sjftech
@sjftech Год назад
Great video, as usual. I just think it's a bit misleading to title this as an internal hard drive mod when this video is about an SD card install. From the title/thumbnail, I was expecting the internal SSD mod that you mentioned you're going to do a video of when the SATA adapter is available.
@Null_Experis
@Null_Experis Год назад
There are plenty of IDE to Sata or IDE to MSata, or IDE to M.2 boards on the market already. You can even directly hook at CF card up to the PS2, as a CF card is IDE compatible. You can even buy very small industrial Disk on Module IDE SSDs up to 16GB
@magfal
@magfal Год назад
For the use of a PS2 they're functionally equivalent since it's practically read only. For something like the Xbox where most games swap to HDD it would be a disaster
@zachUSN89
@zachUSN89 4 месяца назад
this process looks painstaking. I like that the hardware can be preserved and used in a more modern fashion though. Cheers mate!
@silentjose
@silentjose Год назад
Man that cable management is something else. Gorgeous work. Was that nail polish you were using to glue them together?
@devershee
@devershee Год назад
this mod is most prevalent in india... scph 70000 models
@dpacyau
@dpacyau Год назад
One issue I had with this mod is when you're removing the SD card holder from the adapter. During that section, while I was bending the SD card holder back and forth to break it off, I pulled off two pad since they stayed stuck while the rest broke off. I probably would use a hot air station to remove that in the future.
@jasonl3445
@jasonl3445 Год назад
Fantastic job some serious soldering skills - Cheers!
@cbg1723
@cbg1723 7 месяцев назад
This is Awesome!! Would you say the game compatibility list would be the same as the PS2 Fat with hard drive?
@MmntechCa
@MmntechCa Год назад
If you just want to play PS2 games without discs, emulation is more than mature enough these days. But I have tremendous respect for the folks doing crazy stuff to keep the old hardware alive.
@RippahRooJizah
@RippahRooJizah 10 месяцев назад
Yeah, but sometimes playing the game on the more accurate original system is nice.
@wanderingsoul621
@wanderingsoul621 10 месяцев назад
@@RippahRooJizah Exactly! That's the appeal, playing the games on original hardware that they were meant to be played on.
@unknownd3ath
@unknownd3ath 10 месяцев назад
​@@wanderingsoul621running games on the original hardware just runs smoother than emulation especially on the PS2. Pcsx2 just doesn't run games without a lot of stutter
@Synanova
@Synanova 10 месяцев назад
​@@unknownd3ath You're clearly playing on a potato or just making shit up. NO STUTTER AT ALL on decent hardware.
@masterman3211
@masterman3211 10 месяцев назад
Not true, emulation still cant match a ps2 connected to a crt with 12k refresh rate compared to new TVs locked at 30 or 60
@conzpiracy9382
@conzpiracy9382 Год назад
It’s crazy because about 2-3 years ago I thought “I wonder if you could still hook up a hard drive through these connections?” I predicted the future.
@MachoNachoProductions
@MachoNachoProductions Год назад
Haha, you did! The future is now 😁
@sebastian19745
@sebastian19745 Год назад
Around 2011 it was possible, then existed a flex cable to do this mod but it was very hard to find. So, it is ancient history actually.
@rainbowdooche6957
@rainbowdooche6957 Год назад
@@MachoNachoProductions Gusse has been doing these installs for years, just the FPCB is new
@conzpiracy9382
@conzpiracy9382 Год назад
@@sebastian19745 huh. Well then I stand corrected. Well… actually sit, because I’m sitting down.
@marcusql
@marcusql Год назад
really enjoy these videos a ton that it made me start looking for a soldering kit to get into the hobby, but can we get a change in music during your walkthroughs lol
@Drive-n-Vibe
@Drive-n-Vibe Год назад
awesome. going to pick one of these up. waiting on fuses to fix my phat model but may just replace it with this.
@sharzy7209
@sharzy7209 Год назад
Using the front grill to hide the sd card was such a good idea
@dcfuksurmom
@dcfuksurmom Год назад
I'd have used one of those spring loaded slots, so I could put it further in and have it more flush, along with having that nice click when inserting it, some kind of guide would have to be 3D printed though, as losing a card inside a PS2 would be annoying
@saddlesore_adventures
@saddlesore_adventures Год назад
TIto, how thin can one go when doing such mods in terms of wire used? 34AWG for signaling cables (and 28AWG for 5v)?
@MachoNachoProductions
@MachoNachoProductions Год назад
I used 30awg for signal and 28 for the 5v
@talxfon
@talxfon 10 месяцев назад
dude you are a master at soldering. wish i was capable of doing this to my ps2
@setanta2548
@setanta2548 Год назад
bro I have been searching for a way for days Thank you very much
@James_D.
@James_D. Год назад
Awesome! 😃
@MachoNachoProductions
@MachoNachoProductions Год назад
Glad you liked it James!!
@OceanTechh
@OceanTechh Год назад
To much work for me but is great
@sebastian19745
@sebastian19745 Год назад
Ages ago, I got a V12 PS2 that had burnt laser. While I was unable to find the DVD assembly at the time, I used it with an external HDD connected via a IDE2USB adapter. When I found about this mod, I wanted to buy the custom flex cable to make the mod but I was unable to find it for sale. So, I took a 80wires IDE cable and started soldering. I did a good job, it took me almost two days to finish (yes, I took my time) but it was done. I had some laptop IDE HDDs, from 20G to 160G that I was not gonna use again and formated and installed games with WinHiip. I made HDDs for each genre and swapped when wanted to play a different type of game. The HDD I put in the original DVD tray and the advantages were that it required only 5V and was slim enough to fit. When I connected to the internet, OPL downloaded the covers and info for the games and stored them on each HDD. I still have that console. I promised myself that I will never do this mod again but it seems that (since I have another V12 PS2) I will give it a try with the new flex cable. Only this time I will use a IDE2SATA adapter because is easyest to remove a SATA connector than the old IDE 44 pin. And maybe I will disguise the HDD/SSD in a cartridge form shell ;) Beautiful cable management (mine was a mess compared).
@tynewlin
@tynewlin 9 месяцев назад
This is awesome! Finally, a use for my PS2 Slim consoles. That blue HDD access light would drive me nuts though 😬
@hudsonball4702
@hudsonball4702 Год назад
I think I'll stick with the MC2S10. It's great without being intrusive like this mod. Sure there are compatibility issues (I'm looking at you Medal of Honor series), but it's still cost effective and very simple with no soldering. This mod is WAY beyond my capability.
@nonyabiz9340
@nonyabiz9340 Год назад
I agree and compatibility will continue to improve as the software is improved. This whole video seems like a whole lot of work and extra money to have an experience that's 1% better.
@ellaquin
@ellaquin Год назад
Will this work with an SSD?
@MachoNachoProductions
@MachoNachoProductions Год назад
Yes!
@dannyball2503
@dannyball2503 18 дней назад
Having quite a bit of soldering experience is mandatory for this, I’ve got the experience but Wowzers. This is small, I’ll need some magnification. Well done sir, you are for sure a gaming enthusiast, nice work . Very nice fit on the micro SD card. The small led is nice, I’d want it. Very nice routing on the wires. Grade A work.
@TravisStamper
@TravisStamper Год назад
This was a cool one Tito. Had not saw it yet. Thanks for the video
@MachoNachoProductions
@MachoNachoProductions Год назад
Glad you enjoyed it Travis!
@supersaiyaneevee1573
@supersaiyaneevee1573 Год назад
Waaaaaayyyyyy too complicated. But i just enjoyed watching the video. Lol
@Kuraio
@Kuraio Год назад
Clickbait thumbnail. I thought you were putting a SATA SSD in it
@Enchurito
@Enchurito 26 дней назад
Yeah and him saying "You can put an internal HARD DRIVE into your slim PS2" over and over is just false advertising. Then the video is a really complex mod for a microSD card reader.
@iLife64
@iLife64 Год назад
It feels like yesterday that the slim IDE mod was created, it's so cool that it's now available to those with moderate soldering stills
@tetsuo3k
@tetsuo3k Год назад
I always figured this sort of thing was possible. Might need to get my hands on a Slim PS2 now.
@JS-uh1ly
@JS-uh1ly 11 месяцев назад
This is like magic. Subbed.
@rainbowdooche6957
@rainbowdooche6957 Год назад
I was very excited to see this because I've watched Gusse's videos in the past and was/am amazed by his work, but that price point is just a compete deterrent lol, I can't imagine spending $40 on just an FPCB that is WAY too much, I can understand though that these probably aren't terribly cheap to get manufactured with the shape they are, but I will hold off for the future hopefully the price will drop with other people ordering or he will release the Gerber files at some point so we can just order our own batch manually, regardless still insanely awesome to see that this is an ez install now :)
@Bogomil76
@Bogomil76 Год назад
I realy like your music and intro! Everytime!
@retrotony4119
@retrotony4119 Год назад
I was searching for something like this just this morning. Nice.
@bocarlsson3rd
@bocarlsson3rd Год назад
Really nice! Quick question: what is the adhesive you use during cable management (the one you apply with a brush)? I can't seem to find it in your amazon lists.
@qwertylesh
@qwertylesh 8 месяцев назад
Super impressive mod!
@kazinwho
@kazinwho Год назад
This is so cool. I really wish my 90000 model Slim would work with one of these mods. Excellent cable management, btw, Tito haha
@MachoNachoProductions
@MachoNachoProductions Год назад
Thanks! Hope more mods for 90k variants come out soon
@dcfuksurmom
@dcfuksurmom Год назад
@@MachoNachoProductions AFAIK, the pins for IDE aren't there on the 90k variants, but yeah they need more love, its like people just gave up on it. We dont even have FMCB, just Fortuna and Funtuna (Fortuna with a modified FMCB). FreeDVD boot also works. I wonder if there are any modchips that can spoof a USB as an HDD, yeah it'd still be slow but it'd likely improve compatibility with games that require HDD and maybe allow loading FHDB from USB, freeing up a memory card slot.
@Revan-HK-47
@Revan-HK-47 Год назад
Modding is getting better and better every year 😊😊😊
@Kevin_Mariano
@Kevin_Mariano 9 месяцев назад
awesome mod, nice work
@yeolemillinial8295
@yeolemillinial8295 Год назад
i've been keeping an eye on IDE mods on the slim for awhile now, i feel like i can do this mod now that the ribbon is out, i didn't feel so confident about it with wires only yet lol
@SchiffInsel4267
@SchiffInsel4267 Год назад
Cool Video! I personally use SMB because I have already running a NAS and only had to connect my PS2 with a network cable and configure OPL to use the NAS, but its pretty cool what other options there are!
@AlamoOriginal
@AlamoOriginal Год назад
beautiful setup, but i havent tried that kind of NAS storage, does it have any latency of sort when connected?
@chuuwieee
@chuuwieee Год назад
Keep up the good work really enjoy your content
@awesomeferret
@awesomeferret Год назад
I completely forgot about this mod. That's so cool that there's now a quick solder flex cable now.
@kasiorap
@kasiorap Год назад
took me 1 minute and 13 seconds to subscribe, your intro is so dope lol
@Vibropollo
@Vibropollo Год назад
Absolutely awesome! Thanks, Tito!
@MachoNachoProductions
@MachoNachoProductions Год назад
Thank you!!
@TurboBass
@TurboBass 11 месяцев назад
This is a really cool video and I would like to see (obviously not requesting, just saying :P) it would be cool to have a chill cut of just the soldering and whatnot to a relaxing soundtrack.
@kamilbarczyk8339
@kamilbarczyk8339 8 месяцев назад
Awesome work!
@Alex13mod
@Alex13mod Год назад
This is awesome! 2022 and 2023 have made retro restoration much easier, and the options are unlimited.
@BMR86
@BMR86 Год назад
Amazing work! Thank you for what you do!
@DanielOliveiraViolao
@DanielOliveiraViolao Год назад
"Fancy wire management". 😂 That was great. I have a Matrix chip, but the wire management was a mess. 😆Great mod!
Далее
Making The PS2 Even Smaller
17:55
Просмотров 951 тыс.
Прошёл minecraft в Google
00:33
Просмотров 220 тыс.
I built a MODERN PlayStation 2...
21:21
Просмотров 1,5 млн
Playstation 2 | The War Against Modchips
26:10
Просмотров 259 тыс.
This HDMI Mod Makes The PlayStation 2 Look GORGEOUS!
28:34
Play PS2 games from a Memory Card? | MC2SIO | MX4SIO
16:21
Someone Just Did, What Nintendidn’t
25:21
Просмотров 600 тыс.
Free 30r in Duo Op Tactic
0:55
Просмотров 481 тыс.