Making the RTV Ghost Trap From Ghostbusters: Spirits Unleashed!

Подписаться 7 млн

Просмотров 74 тыс.

50% 1

Check out Ghostbusters: Spirits Unleashed at www.ghostbusterssu.com/
The new game Ghostbusters: Spirits Unleashed carries forward the story from Ghostbusters: Afterlife and brings along with it the Ghostbusting equipment and props seen in the film. We’ve partnered with them to build the RTV Ghost Trap as it appears in the game-the perfect opportunity for Tested’s Sean Charlesworth to complete a working RC version of the prop!
RTV Build Parts list:
Chassis Option 1 - Traxxas Stampede 4x4 VXL #67086-4 - amzn.to/3Ep9zla
Chassis Option 2 - Traxxas 67014-4 Stampede 4x4 - amzn.to/3i5pkq2
E-Maxx Big Bore Shocks - amzn.to/3EQKpwn
Traxxas EZ Peak Plus Charger #2970 & 5800 Batt #2843X - amzn.to/3gubKw1
Traxxas TQi 4 channel TX & RX #6507R - amzn.to/3V17xit
RC Switch for lights: amzn.to/3XpYPMc
Front Turnbuckles #3643 - amzn.to/3XkzdQZ
Rear Turnbuckles #3644 - amzn.to/3guTjr8
Traxxas 6755 Center Driveshaft - amzn.to/3Ou0NHc
Traxxas 6888X Front Hardened Steel Drive Hub - amzn.to/3OwevcX
Goolsky 2Pcs AUSTAR AX-3011 Tires (2) - amzn.to/3EVCP4D
12mm to 17mm Wheel Extension - amzn.to/3GzKzKW
Small Light - for guts this works - remove circuit board and just use front and lens.
amzn.to/3ADHtl4
Big Light - for guts this is perfect - cut off front portion - amzn.to/3EXjIHA
Rear connector - 6 pin female ITT Canon type # MS3102E14S-6S - Amphenol, Canon, ITT, Bendix brands are all similar
www.mouser.com/ProductDetail/...
Sean's versions of the steering arm & antenna mount www.thingiverse.com/thing:563...
Full Ghost Trap www.thingiverse.com/thing:139...
Shot and edited by Josh Self
Music by Jinglepunks
Ghostbusters TM & © 2022 Columbia Pictures Industries, Inc. All Rights Reserved.
Game software excluding Columbia Pictures Industries, Inc. elements: ©2022 IllFonic, Inc. All Rights
Reserved. Developed by IllFonic, Inc. IllFonic® and the IllFonic Logo are trademarks and/or registered trademarks of IllFonic, Inc. throughout the world.
Join this channel to support Tested and get access to perks:
/ @tested
Subscribe for more videos (and click the bell for notifications): ru-vid.com_c...
Tested and Adam Savage Ts, stickers, (de) merit badges and more: tested-store.com
About Tested: www.tested.com/about
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Intro bumper by Abe Dieckman
Thanks for watching!
#ghostbusters #props #adamsavage

Наука

Опубликовано:

22 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 137

@tested Год назад

Check out Ghostbusters: Spirits Unleashed at www.ghostbusterssu.com/

@marveld.c1420 Год назад

Love❤ from India🇮🇳.

@pmartinez358 Год назад

How honest they are about the doors and not knowing how to do certain things makes me feel better about my build

@DreadMakerRoberts Год назад

FYI the original could do 50mph! it was terrifying

@georgemclain216 Год назад

Is it going to be used again for the sequel next year

@wildsqueak1816 Год назад

😂 o shit

@necatron73 Год назад

Saw the rebuild today. As much as I love a good rebuild I'm always partial to some destruction footage.

@JacobHGamez Год назад

lol

@DreadMakerRoberts Год назад

LOVE THIS!!!!!!! Well done! There are just not enough exclamation marks available on the internet.

@DreadMakerRoberts Год назад

Also here is the playlist for the RTV rebuild ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SXDIegEz2zg.html

@CworthDynamics Год назад

Thank you for all the sharing you have done!

@coryzepp238 Год назад

I'm an rc guy and I love ghostbusters so this is great. The vxl has a brushless motor and beefier axles. So it would probably last longer with those big tires, but this also probably isn't going to get run regularly and hard so it won't be so much of an issue. Awesome build.

@Narcle0 Год назад

When I saw the RC Trap in the movie, I immediately thought about how to make one. Not surprised it finally showed up here, lol

@maxm1417 Год назад

my dream come true tested and RC all together. For not knowing anything RC related you seem to know more than some RU-vid RC reviewers. Great build and research!

@philopharynx7910 Год назад

Hat tip to the Buckaroo Banzai reference. That's a franchise that desperately needs a little love.

@CworthDynamics Год назад

Charlesworth just doesn't fit on the tag well!

@georgeaura Год назад

Definitely would love to see a future version where more parts on it are functional and can use the more nerdy controller

@punishedprops Год назад

Top notch build Sean! =D

@umbraelegios4130 Год назад

If only there was someone who had done lights and smoke upgrade video for the ghost trap.

@aserta Год назад

9:48 ask Adam to transform the adapters from thread to expanding thread. Then, you'll have what you want, where you reach into the hub with an allen wrench and screw the grub screw into the adapter, expanding it and thus capturing the wheel. Alternatively, you can find the strongest glue and glue them on.

@dorsk84 Год назад

When I saw the movie in the theaters I knew it was either a shortened Monster Truck, Horizon hobbies Granite or a E-Maxx, or a smaller stadium truck, Stampede or the Horizon version, with just larger tires. This just confirms my suspension. Thank for this vid. For the doors you need micro servos and a Y- harness, and possibly a programmable controller.

@PelleKuipers Год назад

I like your typo.

@Jonathan_Chong Год назад

Yeah was wondering what R/C base was used, will say the work to shorten the chassis seems a little much work over finding a already needed sized vehicle and just extending the axel length. Granted if traxxas had a contract for marketing etc then you have to stick to that brand. As for cosplay use being accurate is great but also many like to make it there own so something similar isn't a bad idea ethier and not out of the realm of the Ghostbusters world besides most people won't go on that's the wrong chassis unless it really stood out different. As for the motor was curious about it because of the actions it took in film vs what the fastest motor (traxxas has the 100mph car motor one of if not the fastest made in the industry) could actually do. Obviously suspend belief due to cutting of shots closeups etc but in reality the fastest motor is good for mostly doing wide oval turns and even then you can flip at that speed if you turn too sharply-its like trying to turn a drag car. That said with this being more stadium truck with oversized tires the weight will slow down the max speed unlike the car it was designed for maybe making it slightly easier to turn. The other motor you mentioned seems more probably the one used but using the fastest motor might be the way when filming with a real moving car. I always assumed they took a smaller scale RC that's under 1/10 scale and threw tires from a scale up or two and used the props weight as the downforce to carry it through a turn/handling and with the super wide tires it should hold it's turning. on a last note if the super accurate of the trap isn't required yes sport trap is a start but even better is the one Walmart had that was the same trap but instead of a button pressed at the handle it had a foot pedal. You can take the wiring for that pedal and change it to go to a micro controller on a 3rd or 4th channel and it will do the same functionality.

@CaptainJack2048 Год назад

You mention that you don't have a lot of experience with RC cars, and I understand that this is important as a disclaimer for people looking for that expertise. However... no one knows everything (at first, anyway 😀). Being able to go out and learn what you need to know to get the job done is possibly the most critical making skill of all. I commend you for sharing your process, including the parts where you didn't let lack of familiarity with a topic get in the way of your project. Well done.

@richv1893 Год назад

That's one of the coolest R/C's I've seen in a long time.

@Scrapla1 Год назад

19:00 reminds me of the controllers we used for RC planes in the 80's even though in the 80s there were more advanced controllers the style featured in this video were the budget friendly option.

@kevintofttoft Год назад

I got to drive one of these! Thanks Ben!

@SoirEkim Год назад

Can’t wait for the RU-vid notification to chime on the video of Adam fabricating from scratch his own FULLY OPERATIONAL version. That would be AWESOME “AF”!

@historydude446 Год назад

now we need a ghosttrap drone

@PlayNowWorkLater 2 месяца назад

Nice! For those Ghostbusters jobs that require some off-road catching.

@total_betty Год назад

Absolutely love this, it's such a pleasing chunky shape and the design and build is perfect. Really enjoyed it the video, thanks!

@Shimmerin Год назад

This was WONDERFUL!

@TeriWilde Год назад

Amazing build, I love everything Tech and RC so this ticks all boxes.... One point that made my OCD itch, The tires are directional and on the wrong way around and need swapping left to right. and the Game version also shows the tire the correct way around.

@CworthDynamics Год назад

Ha - good to know!

@cabe_bedlam Год назад

Always great to see Sean!

@jonathan__g Год назад

Super cool build. This looks great!

@jamesbailey5859 Год назад

This video made me think of Grant Imahara... he would've been all over this build... 😢

@CworthDynamics Год назад

His doors would have worked - and smoked - and made sound!

@tested Год назад

@@CworthDynamics #Truth

@16-BITFPV Месяц назад

Grant Imahara and Tim Smith were working on a speedrun Guinness Book Of World Record RC car before he passed away. Anyone know where the footage is or what happened to that project?

@nathantron Год назад

Literally just finished the movie. Fucking awesome.

@mosspiglet2897 Год назад

I just cannot express the joy I get out of your videos. Huge fan!

@FutureRailProductions 11 месяцев назад

I'm attempting this with a 1/16th E-Revo Chassis. Dimensions are about the same length as the Spirit Halloween Trap. Still have a lot of work to do.

@jarekmace1536 Год назад

If budget is not a factor, almost every part can be replaced with metal. Most RC drivers will tell you to keep the lower control arms as plastic. This is an easy part to replace and you need SOME flex point, or everything gets bent and there goes the budget. The wheels are likely the ones used on the Traxxas X-Maxx. The monster size wheels often require, and come with an adapter that bolts into the wheel center to connect to whatever hub you run, whether 17mm hex or screw post hub. A common issue will be that the wheels are too close to the body to give good turn radius. Extended arms are available. The decision is screen Replication vs. usability. The guy at the Knight Rider Historical Channel is having a similar problem with the mobile unit he got. How does one fit the office and garage into a space 8' wide?

@CworthDynamics Год назад

Totally! The tires are 3rd party (parts list above) - they indeed used the extenders as most of the movie shots were the practical RC RTV!

@carlostavaresjr958 Год назад

Yes I've done this with my molded tmaxx long ago.

@johnabbottphotography Год назад

Beautiful job, brother!

@davidbyourplanb Год назад

So awesome!!!

@truerc Год назад

They should have used a Slash 4x4 chassis for the film. That would provide more space and stability. The Stampede was a strange and less practical choice.

@JollyPirateAhoy Год назад

2 servos with extended arms and have it assigned to the lights on the receiver or aux. Flip a switch and will push doors up and down. Can also set the timing on the servos to run slower for a more fluid movement

@mojolycan2148 Год назад

Super cool 🤘

@LeoAzzakaGoile Год назад

Ohh My! Oh My! ... OOOHH MY! Thank you :)

@nathkrupa3463 Год назад

Great video sir thanks for sharing.

@jonathantaylor6349 Год назад

Fan-freakin-tastic!!! Awesome beer retrieving vehicle!!!! Gotta work out the refrigerator with a custom drop mechanism to deliver said beverage to the trap🍺🤔

@kryptonianbat Год назад

That is so cool...gr8 job!!! Til next tyme...keep those cre8ive juices abrewing!!!

@necatron73 Год назад

Ive a great suggestion. Add an fpv camera and diguise it as one of the lights or greeblys. I think a swift fpv kit would work and be fitted to the rc car controller (the one inside the car not the handheld controller. Pair this with an fpv headset disguised as a pair of ecto goggles. You would be able to drive and see where you are going and still be able to look cool doing it.

@powchainsamaniego6744 Год назад

cool rc ghost box

@kearnsey64 Год назад

Coolness!

@Oldmonstrosityshop Год назад

The only caveat I would say about buying the Stampede VXL is that the VXL motor would probably cope with the larger tyres a lot better than the standard Stampede. As long as you have the right spur/pinion set up

@ronwhitmill7068 Год назад

The starting torque alone (from a standstill) would be reason enough to uprate the motor, but what about uprating battery as well? Sure, spur/pinion can mitigate to an extent, but that translates to what you want. Do you want ease of starting from a stop to protect the motor or do you want top speed?. A delicate balancing act to know what best suits. The other upgrade should be a higher torque steering servo to handle the large wheels and overcoming the centrifugal forces imparted by them at speed. (Spin a bicycle wheel whilst holding each end of the spindle, then try turning it to get an example of the centrifugal forces involved).

@666cemetaryslut Год назад

It's basically a decoration that also happens to drive. It's not an RC that will get used like an RC car.

@ronwhitmill7068 Год назад

Irrespective, Spur/Pinion gearing has to be correct to the situation so that the motor does not get burnt out. Same with steering servo.

@nat7278 Год назад

That was fun

@bennyfactor Год назад

Fun!

@YodatheHobbit Год назад

Play Spirits Unleashed everybody! It's super fun! Especially to play as a ghost! And you can play as SLIMER!

@andrewphillips8198 Год назад

I’m building this soon

@retrogamerfan123 Год назад

I’d love to see Adam build his own Johnny 5 robot

@rcjbvermilion Год назад

It's been a while since I have looked, but the NYCNC guys were making one out of metal.

@171QA Год назад

Neat.

@davidhogue100 Год назад

And I have a 4wd Stampede out in the shop already....hmm, lol

@Peter_Enis Год назад

ZUUUUUULLLLLLL!!!!!!! 😍👹👹👹

@chrishechtl8330 Год назад

I love it! I want one but I don't have room. lol I wonder how long it will take someone to make them commercially? they did with Lola from SW after all.

@markojuros6533 Год назад

Aaaaaamazing.😆😆😆

@robevans8555 Год назад

Would be simple to setup 2 mini servo to push the doors open

@cerohero1 Год назад

So it looks like the way the movie rtv's wheels/hubs work is more like what you would see on an 1/8th scale buggy/truggy. Rather than a screw you have some threads that peek thru the hole in the wheel and a nut that holds it all together. Something like this part number from Hot Racing would likely work HRAWH17HT01. Edit: I would also use different 17mm wheel nuts that are a better color (black? Kinda hard to tell) and a simpler hex shape. Like Arrma part ARA310449

@seththomas2490 Год назад

A smaller 2s lipo battery will give you more space underneath the doors. There are powerful batteries out there. Ovonic, or tattu are just a couple recommendations. The hub on the wheels on the movie version look like just a couple of hex nuts that hole them in. Try looking at the wheels of a Arrma Mojave for reference

@CworthDynamics Год назад

Thanks for the tips

@ZeFroz3n0ne907 Год назад

Hey guys! I had a thought for the doors: Would a worm drive or a servo with 3d printed gears work to open the doors? Just a thought! Loved this! Love the channel! Keep up the amazing work!!

@devoid-of-life Год назад

I’d imagine that a servo and 3D printed gears would be better so it can open more quickly

@ZeFroz3n0ne907 Год назад

@@devoid-of-life Makes sense to me, I thought the worm gear would be another thing to possibly try if the other didn't pan out.

@devoid-of-life Год назад

@@ZeFroz3n0ne907 I get you

@CworthDynamics Год назад

Possibly! Wonder if it would open really slow?

@ZeFroz3n0ne907 Год назад

@@CworthDynamics That was my thought as well, may be worth a try? I loved the episode you made with Adam, thank you for responding so quick!

@the47thpresident Год назад

A short LiPo battery pack with a traxxas connector to replace the one you have could free up enough space to install servo that could open and close the trap doors.

@Lion_McLionhead Год назад

The ABS in a 1973 Futaba transmitter is probably too brittle to use anymore. Just weird that they couldn't drive ecto 1 under the ghost or they couldn't throw the RC car out the back instead of having a complicated trap door.

@CworthDynamics Год назад

Based on how easily the side panels break, this may be true!

@salenstormwing Год назад

Spirits Unleashed is great. It honestly makes me want to build a proton pack based on their customized designs. Great work on the RTV. Hope to see more. Maybe SU's ghost detector?

@melissacardoso467 Год назад

Realmente incrivel

@michaelpw97 Год назад

Please make a watch collection video!

@GhostGuyPaul 12 дней назад

Where’d you find the red lenses for the front headlights??

@Games_and_Music Год назад

This looks like Wall-E's cool cousin.

@PetrolJunkie Год назад

Now I want to get Adam an XMaxx to see what he thinks of driving it. lol Also, I want to make one of those just because, now.

@jesseedmands9631 Год назад

Are the tires on backwards while the model is in Adam's shop ?

@CworthDynamics Год назад

Apparently! Will fix.

@CworthDynamics Год назад

@@16-BITFPV the set pictures I saw had them going both ways so it was a toss up!

@CworthDynamics Год назад

I fixed the tires! 😂

@theamazingross1770 Год назад

Adam you beautiful genius

@a.d.d._maker Год назад

Did you receive your whole ecto1 from Eaglemoss before they went under? I did not. Sure hope someone else picks up that subscription. I have half of a very expensive model.

@unorec1983 Год назад

swap out the traxxas battery pack for a RC racing shorty pack you will gain alot of free space

@TheChevyloonatik Год назад

Hey Adam watching the video right now, i know a decent amount about traxxas rc vehicles and can set you up with the answer to the wheel issue

@ezrarichardson279 Год назад

Can’t you just use a simple 9 gram servo with a push rod for the doors?

@marveld.c1420 Год назад

Love❤ from India🇮🇳.

@BaconbuttywithCheese Год назад

Gasoline version with working doors and smoke. 88mph do-able.

@CworthDynamics Год назад

That would be terrifying.

@BaconbuttywithCheese Год назад

@@CworthDynamics When terror becomes proportional to fun! :-)

@billyspocketlife Год назад

I've been waiting on finding a cheap enough rtv that is the correct model but turns out you can literally just by the wheels seperately

@CworthDynamics Год назад

If you don't need it to go super fast and be 100% accurate that's the way to go!

@PaulJones-br6uv Год назад

More Maggie!

@feckneddy Год назад

More Maggie Please .

@MoHanStryngslayer Год назад

Now if only you could use the one in the game without breaking your Ghostbuster.

@Eye_Make Год назад

Can we get a video about Maggie?

@Genadvideo Год назад

Tread pattern wrong side

@CworthDynamics Год назад

On it!

@16-BITFPV Месяц назад

It's movie accurate. Tread pattern goes backwards. Not sure why though?

@apershin77 8 месяцев назад

Do you think I’ll ever be a ghost trap drone?

@Wabowussi Год назад

Twisted Metal Small Brawl??

@troywalker8078 Год назад

tires are on backwards...

@juanitabeall8723 Год назад

14 hours

@physicsbystanprisajny6284 Год назад

Ghost Buster rover?

@MrChief101 Год назад

Yeah, that's all well and good, but what about EVIL, pure and simple, from the 8th Dimension?!!!

@kquinn9910 Год назад

Adam savage's tested I hope 1 day that u come to lansing Michigan for a comic con because I would love to show u my gear that I modify in my own image and that I hope 1 day that I can show Jason riteman as well.

@trusarmor4957 Год назад

'all you need to do is Blah Blah Blah' Lmao

@finchmeister08 Год назад

Why do you guys keep deleting my comments about Quentin Michaels and Marc Carabelli? They literally have all the files you could ever need to build any Ghostbusters prop including the RTV.

@CworthDynamics Год назад

If including links RU-vid will often auto-delete it.

@Outlawoverlanding2015 Год назад

Day one of posting till Adam notices this comment. Adam you have to check out NerdForge on youtube.

@rynoopperman5010 Год назад

Am I the only one that subscribed to Adam Savage Tested, due to Adam If it was john Smith tested , I would not have subscribed… I am here for him, and him only I must be alone on this…😳

@CworthDynamics Год назад

Sorry?

@bryan__m Год назад

Same. I skip all the Norm and etc videos.

@danielmagana7043 Год назад

That is kids Ghostbusters ghost trap

@colbicolbiWTF Год назад

someone tell ukraine to not sleep on rcv! drones are greater yes but im sure we could gather all of our kids old toy rc cars and send em over there where they can rig it up to fight infantry lol

@AlexSanchez-pt2lq Год назад

Want to work out for reals?

@jackfranks7160 Год назад

Afterlife was garbage

@Sleepy4life Год назад

Its a traxas car with a trap on it , lame

@SahareStudios Год назад

Awesome but should have added the stickers on the front: I can't add links but search Gogglle for: "MUON TRAP: OPERATING MANUAL (ADF, TR, TR G, OFF, NRADS, ETC.)" Afterlife played a bit too loose with the canon details (the wand bargraph didn't even work when Phoebe turned it on) Stephen Dane's original work in 1983 is the go to "manual" for how these things were made to work: Again I can't add links but Gogglle: ghostbusters reference library "Ghostbusters Prop concepts and inspiration" Stephen Dane is the person who designed the wand and the trap in 1983, his manual is listed in his concept drawings on the above site.

@CworthDynamics Год назад

I actually make those dry transfers, but left them off since they weren't on the Afterlife RTV

@SahareStudios Год назад

@@CworthDynamics Sure. It's inconsistent in the movies. They were on the screen used GB1 Planet Hollywood trap (which is where we learned what they were). I think it was an oversight on the part of the director to not include them in all scenes. All the prop switches (especially the wand) are meticulously labelled. To have that many unlabelled rotary switches so close together on the front of the trap doesn't really add up. We will see what Firehouse brings! But awesome replica man it looks out of this world.