Makita GA4530R Angle Grinder | Unboxing and Setting Up

Подписаться 965

Просмотров 77 тыс.

50% 1

Amazon: amzn.to/3sQJS5M
In this video I show the unboxing and the setting up the Makita angle grinder GA4530R including installing of the grinding wheel.
115mm or 4 inch wheel diameter with maximum wheel thickness of 7.2mm. Rated speed of 11,000 rpm with no load. Weight 1.8kg. The tools is intended for grinding, sanding and cutting of metal and stone materials without the use of water.
#makita #tools #anglegrinder
Note: Always wear appropriate eye and hearing protection. Always read the instruction manual before setting up and using the equipment. Have fire extinguishing equipment ready to hand.

Авто/Мото

Опубликовано:

4 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 84

@JohnCarverUK Год назад

Makita GA4530R Angle Grinder --> amzn.to/3Mdb2ko

@VintageRVAdventures Год назад

Great angle grinder.

@DiggingwithDallas 3 года назад

Did an abrasive wheel course at my very first job the course was 1/2 day. On the way back the works van decided to break down on this. 1/2 course ended up go on forever brake down to a garage hat to wait for the boss to bring 2 cars to get us all back. Managed to get over time as well!! Win win

@JohnCarverUK 3 года назад

Lol ... can't refuse the overtime :-)

@richardharrold8777 2 года назад

Thank you, John. This was very helpful. I also read your replies to some of the other comments here which were also very helpful. Great use of RU-vid for a functional, well put together tutorial in what I anticipate will be one of the more well used tools in my shop.

@JohnCarverUK 2 года назад

Thank you very much for the feedback. Glad it was helpful!

@davewr82 4 месяца назад

totally agree with Richard - brilliant

@mirtaxiomelyssandin2001 Год назад

Thank you very much! Very helpful and easy to follow up. God bless you🙏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾☺️👌🏾👍🏽

@JohnCarverUK 11 месяцев назад

Glad it was helpful, and you enjoyed the video!

@zimbaliretreats 2 года назад

Thank you- video was perfect👍 ❤️ from Jamaica🇯🇲

@JohnCarverUK 2 года назад

Glad it was helpful!

@HappyCamperTales 3 года назад

Makita is a great brand to buy.

@JohnCarverUK 3 года назад

😀🚙

@abdurahman1259 9 месяцев назад

Very good information given,

@JohnCarverUK 7 месяцев назад

Thanks for watching and welcome the feedback.

@danielbarrett8560 10 месяцев назад

Very useful thanks!

@JohnCarverUK 7 месяцев назад

Glad it was helpful!

@robinbomai9319 Год назад

Nice set up John 👍

@JohnCarverUK Год назад

Thanks Robin 👍

@mariacolon2954 2 года назад

Excelent video!

@JohnCarverUK 2 года назад

Thank you very much 😀

@robertr2731 Год назад

Thank you for you're help

@JohnCarverUK Год назад

Happy to help

@MrRobertojg 2 года назад

Hi, Good short video and introduction to the product. Just one, but I think important point to make. In the video you say that the supplied disc is a 'Cutting' disc for metal. As far as I am aware the actual disc shown is a 'Grinding' disc for metal. This is an import distinction as using a Grinding disc for cutting and using a cutting disc for grinding is potentially very dangerous. In the interests of safety I just thought I would raise the issue.

@JohnCarverUK 2 года назад

I will have to take a look back at the video and see what I said, against the product supplied.

@simonhendy199 2 года назад

It's definitely a grinding disc with that thickness!

@Retrobots Год назад

Great video!

@JohnCarverUK Год назад

Thank you very much

@asfuss 3 месяца назад

Very helpful!!!

@JohnCarverUK 3 месяца назад

Thank you Alex

@poohpot4462 3 года назад

Thanks so much for this. Very useful 👍

@JohnCarverUK 3 года назад

Thank you very much for the feedback.

@bmzaron713 2 года назад

thank you

@JohnCarverUK 2 года назад

You're welcome

@5295665 11 месяцев назад

Thanks bro

@JohnCarverUK 11 месяцев назад

Welcome glad you enjoyed.

@patscanlan2678 6 месяцев назад

When using with a wire wheel cup brush do you remove the flange?? TY!

@JohnCarverUK 4 месяца назад

I am not sure to be honest.

@danielbonner8309 2 года назад

The makita 4 inch is my favorite of all time and I have had about 10 different grinders. The smaller body feels great in your hand and they are tough and reliable. Replace the brushes and switch and theyll keep going.

@JohnCarverUK 2 года назад

Totally agree!

@eddyhmmk1 Год назад

Kinda sucks how the guard doesn’t have a quick adjust. But this thing is a beast, compared to my cordless.

@MrCleitus Год назад

The guard set up lame for sure when compared to Bosch, it's only 720 watts also.

@JohnCarverUK Год назад

Thanks for the feedback both.

@cliffcarlo180 Год назад

Only design fault is the on-off switch. Dust can accumulate behind it after a while making the unit difficult sometimes to switch and stay on.

@JohnCarverUK Год назад

Yes, I would agree with that experience.

@kathykeane9022 2 года назад

Hello John. I want to use a steel cutting disc (which was sold with the unit) but it won't secure - not as thick or shaped as the grinding disc. The instruction manual is useless. Thanks in advance. Catherine

@JohnCarverUK Год назад

Thank you for the feedback Catherine.

@bikemancambs 2 года назад

first time useing this today , the switch isnt good and the handle is very cheap , sound is ok and cutting is fine

@JohnCarverUK 2 года назад

Thanks for your feedback regarding the equipment.

@TheSr73 2 года назад

Thanks for the video. I'm looking for a 9565crv or this one. The former has sjs I and this sjs II. Does it make any difference?

@JohnCarverUK Год назад

We are not sure, sorry.

@harrytimko2206 2 года назад

Good video.. can I use a Ridgid multi grinding diamond wheel with a Makita grinder? I ask because there is no room on the driveshaft for the inner flange nor the locking nut with the Ridgid grinding wheel.

@JohnCarverUK 2 года назад

Thank you for the feedback. Sadly, I dont know the answer to your question.

@AT_PokemonTCG89 2 года назад

Just bought one need to cut subway tile for by backsplash. Does anyone know if this tool can cut tiles if I buy the right blade or can I use the diamond blade if it comes with??

@JohnCarverUK Год назад

We have never cut tiles with ours, so we cannot give you the answer. Others might be able to.

@melvinsanchez245 3 года назад

Cuantas revoluciones por minuto

@JohnCarverUK 3 года назад

It has a no load speed of 11,000 rpm.

@naspiasaronay3532 2 года назад

Can I use this machine for wood? I hope you can make a video for this.

@JohnCarverUK 2 года назад

Yes, if you use the right type of disc. You can also use other attachments such as a rotary wire brush, as we do.

@josivasam8932 Год назад

Do you know where to purchase the 4 inch cup wheel?

@JohnCarverUK Год назад

Is this the sort of thing you mean? amzn.to/3sHIlko

@Wooshandpush1 3 месяца назад

Does it come with a disk

@JohnCarverUK 3 месяца назад

Yes it does. Check the product link.

@andrewrichards3520 3 года назад

nice video, not to long, does not rabbit on.

@JohnCarverUK 3 года назад

Thanks Andrew 👍

@billyatkin 2 месяца назад

Place the inner flange over the shaft 😂😂😂

@JohnCarverUK 2 месяца назад

Lol... it would be rude not to

@Clairezee5 3 года назад

No way can we remove the locking nut it’s rock solid

@JohnCarverUK 3 года назад

Just checking, are you attempting to turn the nut anti-clockwise? You may need to tap the spanner sharply with a hammer or similar. You can clamp the used disc in a vice, but don't reuse it afterwards.

@timwilcox960 3 года назад

Not a bad effort John but your vid' does have one major flaw. When inserting the cutting disc you say: "make sure you get it on the right way" - or words to that effect. However, you don't explain what the 'right way' is! If I was installing the disc supplied by Makita, I'd just follow what you do, but that won't work as I'm fitting a diamond blade instead (bought seperately). So, explaning which way is 'the right way' to instal discs/blades is, IMO, a major component of a setting up vid' of this kind.

@JohnCarverUK 3 года назад

Hi Tim, thank you for the feedback which is welcomed useful constructive criticism, and which will be taken on board.

@timwilcox960 3 года назад

@@JohnCarverUK Hi John, glad you've taken my comment in the spirit in which it was intended! In all other respects, it was a well put together and well executed short vid'. (Short is good btw, very good.) You could do a follow up vid' in which you address the different types of discs/blades availaible (along with their respective uses), with particular focus on which way round each one needs to be fitted. If you do, be sure to address which way around the locking nut goes on as well, as I copied you in this vid' which, needless to say, is the wrong way around for a diamond blade! ;-)

@alistairseaton800 Год назад

@@timwilcox960 This is precisely the info I'm looking for. I've bought a different blade and im not sure which way the nuts should go....

@iilygray3806 2 года назад

@JohnCarverUK 2 года назад

@funkidstv5308 3 года назад

Your not saying which side to put handle on if right or left handed. I'm a complete novis. I'm only having to guess here 🤦‍♀️

@JohnCarverUK 3 года назад

Thank you for your feedback.

@funkidstv5308 3 года назад

Can you please let me know? ;)

@oranobrien872 3 года назад

@@funkidstv5308 if you’re right handed, you use your right hand to hold the body of the tool and the handle goes on the left. Vice versa for left handed