Manually DRAWING with a LASER CUTTER

Подписаться 105 тыс.

Просмотров 34 тыс.

50% 1

This video shows the experimental software I built which makes it possible to control a 10 Watt laser cutter by drawing on a tablet. What can go wrong? Although I couldn't think of a productive use for it, It turned out to be more fun than I expected! Due to the hazard this comes with and the early development phase of this software I am not going to share it freely. You can contact me directly if you would like to try it out for yourself, but it's at your own risk!
The second halve of the video shows a more productive use in which I make a fitting packaging using packaging. I use the slicer for Fusion360 to make the cardboard slices, but it's also possible to use BlendScript which I don't have experience with.
I've used the Pergear LaserStorm S10 which does a very decent job. I do recommend to add a base place and some fume extraction as I've shown in the video.
Please use my referral link if you want one yourself: amzn.to/3kgX2a2 and you can get $70,- discount plus a $50,- coupon when using the promo code QWMXTKDD
Other interesting options for this laser cutter are the air assist pump: amzn.to/3kgX2a2 and a honeycomb working table amzn.to/3kgX2a2 Disclaimer though: I don't have experience with these two products.
I also recommend using better safety goggles, these are ones I used jtechphotonics.com/?product=l...
Please use one of my affiliate links to support my work:
The equipment I mostly use:
FDM printers:
- Creality Ender 3 pro: geni.us/KDfgpA
- Creality Ender 3 S1 pro: geni.us/n03Ah
- Creality CR-30 Printmill: geni.us/8zMA
Resin printers:
- Anycubic Photon Mono X: geni.us/Ijcw2
- Anycubic Photon Mono X 6K: geni.us/hRMBSB9
- Anycubic Photon M3 Max: geni.us/8wGZDd
The software and sites I use:
-Music source: Epidemic sound www.epidemicsound.com/referra...
Check the merch on merch.properprinting.pro/
My designs can be downloaded from my website www.properprinting.pro/
Consider becoming a Patreon supporter: www.patreon.com/properprintin...
Or buy me a coffee! ko-fi.com/properprinting/
Chapters:
0:00 Intro
0:12 The software idea
1:31 The laser cutter
2:24 Getting it to work
6:47 Drawing with the tablet
9:09 Making fitting packaging
11:44 Making the box
14:41 Using XPS sheets

Наука

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 117

@properprinting 2 года назад

Due to safety reasons I’m not going to share the software openly like I did with the 3D printer controller. I can send it to you on request, but at your own risk! If you know a fun case for a laser engraver, leave a comment! :D

@alexdubois6585 2 года назад

I think you'll be a surgeon soon. Remote working.

@SeanTaffert 2 года назад

Add a dental drill or a plasma torch and I'm in for a copy.

@ryanaukes266 2 года назад

I would love to receive the software so i can experiment with it with my own laser engraver. How can I get a copy? Btw I really like your projects and your videos! As a dutchie I can also relate to the ‘godve…’ moment 😂. Thanks in advance!

@properprinting 2 года назад

@@ryanaukes266 Awesome! You can send me a message using the form on my website properprinting.pro/about/ Be aware that it's experimental spaghetti code made in LabVIEW. You can download the LabVIEW community Edition for free, but if you haven't used it before, this will definitely not be plug & play.

@sebastiengara4891 2 года назад

I'm pretty curious about your soft. I'm doing laser with a longer LK 4 pro, on marlin 2.0. I have mostly done wood engraving for the grand-parents :)

@jaspurr7467 2 года назад

Can really relate to that moment of 'thing doesn't work again' "GODVE-"

@muralha1 2 года назад

To better deal with the smoke, get an aluminium honeycomb bed and vacuum from underneath (vacuuming from the back and the sides also helps). To get better laser performance, make an air assist (normally DIY is with an aquarium pump). It also helps in keeping the lens clean. If you're using LightBurn, you can add an webcam for precision engraving.

@joebywan 2 года назад

knife table's better, honeycomb you end up with flashing on the back of the workpiece

@TheStuartstardust 2 года назад

Water mist top just before on light wood also reduce burning and black fumes marking. Sometimes at least 🤓

@stevesmith-sb2df 2 года назад

Use lightburn to cut perforations to make the cardboard fold easy. I use this feature when making greeting cards.

@properprinting 2 года назад

That's a great idea!

@3DMusketeers 2 года назад

Okay, up until now those diode lasers have been absolutely stupid to me, especially having a co2 in the shop, but this is a legit use case that seems to work well! Nice work!

@properprinting 2 года назад

Thanks Grant! To be honest, I had difficulties finding an actual use since I'm mainly focused on functional products. I'm glad I was able to find something useful :D

@3DMusketeers 2 года назад

@@properprinting Still big safety risks, glad you covered that, but I agree, something is eventually useful about them!

@tigre3droyce771 2 года назад

I have been look for a carton free template software for a long time now.. thank you every much

@jralrazaz2828 2 года назад

Man you are genius, loves every single video you made, keep it up

@Diesr 2 года назад

5:30 *harnesses his inner Dutchman*

@uliklaassen 2 года назад

Im following for about 2 years .... but never hat so much fun watching ..... greetings to holland from essen

@garagemonkeysan 2 года назад

Great video. Very entertaining. Awesome use of upcycling cardboard. Mahalo for sharing! : )

@Dystrackshun 2 года назад

You are a proper mad engineer...I love it!

@NudelMC2 2 года назад

i love your stuff dude, keep up the good work

@geauxracerx 2 года назад

Amazing how you always seem to parallel what I’m doing and deliver the missing pieces sometimes before I know I need them 🤯

@properprinting 2 года назад

That's, awesome!

@maxbiagi3091 2 года назад

Simply Genius 😀😀😀 Thanks for your vids ❤️❤️❤️🙏

@Pluto1010 2 года назад

I like your crazy ideas :D

@LuisHansenNH 2 года назад

You remind me of myself 10 years ago, when I made everything using Flash. It was fun. But then came Steve Jobs and killed Flash. I gotta say, thanks to him, now I can do much more interesting stuff with the new stuff I learned.

@andrewowens5653 2 года назад

My suggestion is that you add a 2-axis head to the laser mount so you can cut at variable angles. That way you aren't constrained by sloting pieces together at 90 degree angles.

@duality4y 2 года назад

how about no

@andrewowens5653 2 года назад

@@duality4y Excellent punctuation!

@screet123 Год назад

Awesome video! I also have laser and i use it mostly to encrave names to wood and creating signs ect. I also made foldable cardboard boxes. I made dashed lines with laser to the folding lines so its easied to fold the box up. I also 3d printed small cones to lift the cardboard up to get better quality while burning through stuff. Honeycomb would be better tho.

@GhVost Год назад

Thanks for the video! Do you have a toolchain for a newbie to learn the LabView in a reasonable amount of time?

@cappe_yt9182 2 года назад

What is your opinion/thoughts about the Bambu Lab X1 (Carbon)? seem like an actual printer with improvments and new features. but then again its a kickstarter.

@your_utube 2 года назад

Dit is nou vir jou 'n ding! Laserstrale was nog nooit so misbruik nie.

@austinc9153 2 года назад

I would love to get a copy of the software to play around with and find regular use options, I use a laser engraver frequently and I feel like this would be perfectly suitable for some artists

@properprinting 2 года назад

Nice! Please send me a message through my about page and I'll send it to you properprinting.pro/about/ I can also send you the stl's you asked in your other comment.

@christophermacier 2 года назад

I suggest you try using the sheet metal function of fusion to create a foldable cardboard insert to cradle the extruder. Then convert that into flat pattern and export that DXF for your laser. Will be much less cardboard waste, faster production and cheaper because of both previous reasons.

@lipoudadaluvich5628 Год назад

cool ! can you share the stl of the fume extractor please ? it s looking really awsome and easier than en encloser !

@derekmcdonald2168 2 года назад

New goal: be as cool as this guy

@sl_st 2 года назад

It will be even more interesting if you receive data about pressure, tilt, rolling of the pen and translate them into coordinates for additional axes.

@realandthebandit2535 2 года назад

And or for thicker lines like a paint brush

@OldCurmudgeon3DP 2 года назад

If that's a true 10W output then you have a tool that is very versatile. A 20W 🤯😱 quad diode just hit the market. I didn't see it mentioned in the video, but it looks like you may have done "a bit" of research on laser cutting/engraving. May I suggest checking out Laser Everything and The Louisiana Hobby Guy for more tips and ideas? LA Hobby Guy has a forum with a section on what's not "safe" to use w/ a laser whether it be diode or CO2. Many materials either can't be cut or give off poisonous fumes.

@properprinting 2 года назад

20W is insane! Thanks for your suggestions!

@rachellejanssen2655 2 года назад

Would be interesting if you could sell these crazy inventions as a side hustle! Kind of like how the exoslide guy does it.

@properprinting 2 года назад

I was thinking about that, but at this moment my channel itself is the side hustle😆

@jsal92 2 года назад

"this is not a toy" he says and then proceeds to play with 😝

@gonzabaldo 2 года назад

Loved this video! And the power of that laser 🤯what about lifespan? Probably a lot using it below 80% right? I probably order one and test it on my diy laser. I wonder how will perform with air compressor + your fume extraction solution.

@properprinting 2 года назад

I have no idea regarding lifespan. I think it'd decrease when burning cardboard like I did xD

@DaveBorghuis 2 года назад

This is a LED laser, not a CO2 laser that you would use on max 80% of power. Don't know if this 'rule' also apply to a LED laser.

@TheStuartstardust 2 года назад

@@DaveBorghuis co2 need to be below 80% really? Have a 80w and run most cutting at 95 🤔😬

@geauxracerx 2 года назад

@@TheStuartstardust yeah 2,000 hour laser tube lifespan. Greatly decreased when run above 80%

@jcn115 2 года назад

Plastic Man was the guest presenter on this video

@rickrack78 2 года назад

Could you use the laser to weld plastic parts together? Say, 3D print a couple parts that can be assembled and use the laser to fuse/weld them?

@properprinting 2 года назад

I have no idea, but welding with lasers is possible so why not. Interesting idea, thanks for bringing up!

@thomasre8073 Год назад

awesome

@DigChaos 2 года назад

Lol that box template lookin REAL sus

@Meerchi 2 года назад

You got my like 12 seconds into the video :D

@WhamBamSystems 2 года назад

Brilliant Jon! Can I get your program? I want to try some improvised brain surgery on the fly

@properprinting 2 года назад

Thanks Peter! I'll send you an email ;)

@rtytt1243 2 года назад

where can i download the files or buy the files of the belt extruder or are they not released yet couln't find it on your website

@properprinting 2 года назад

I'm going to publish them on my website soon after the upcoming video!

@Roobotics 2 года назад

Instead of resins, if your print head has flat parts, you could laser those out?

@properprinting 2 года назад

If the part only has contours, so no 3 dimensional features, that's possible.

@platypusrex2287 2 года назад

Where can I find the files for the red fume extractor?

@olorf 2 года назад

"live laugh love 😐" 🤣

@magnagazoo4863 2 года назад

I remember being forced to do tests in labview... It sucked a bit duck...

@theofficialczex1708 2 года назад

Ah! A fellow Slicer for F360 user. May the deprecated software of yesteryear be picked up and maintained by its original creator in the future.

@properprinting 2 года назад

It's a shame that it's no longer being maintained anymore. This has some great potential and it would be nice if it's not that bound to Fusion360 itself.

@PascalVos 2 года назад

mooie bloemen!

@LeeFiero Год назад

I lasercut alot and its tricky to cut cardboard slow. You need higher speed!

@SeanTaffert 2 года назад

So can you cut 3D printed SLA resin with your laser? Then you could laser mark or post process parts.....like serialization or automated support removal. THAT would be sweet! Industrially, if you could automatically remove supports, that is worth money.

@properprinting 2 года назад

That'd be interesting, I have no idea how well that'd work. I have to investigate if there'll be any toxic fumes coming off though

@SeanTaffert 2 года назад

@@properprinting If toxic fumes are the issue, then just cracking the seal of the resin bottle should be an issue too. I'm SURE there will be some nasty stuff from laser burning SLA resin... laser your name into a cabbage and tell me how that smells.

@properprinting 2 года назад

@@SeanTaffert I have to disagree on that one. Burning materials can release toxic fumes, PVC is a prime example of that. I'm not a chemist, but I'd not assume that something is safe to cut with a laser.

@mduckernz 2 года назад

@@properprinting You are absolutely right about that. Heating materials to decomposition is effectively performing very dirty chemistry and can result in all sorts of very unusual products that may be super toxic. Especially so if you are burning with high frequency light like these diode lasers tend to as photochemistry also makes for even more unusual products!

@duncyy7471 2 года назад

Gcode G28 homes X Y and Z. i guess you are missing the Z axis (or homing switch for that matter). Recently had the same problem, I didn't want to change the gcode so I just shorted the z switch signal.

@properprinting 2 года назад

I found out that G28 places the tool back to its zero position instead of homing. This can be useful when you start engraving at a different position and set the zero position somewhere else.

@duncyy7471 2 года назад

@@properprinting G28 should home. "virtual home" can be set with G92. if you want to go back to here (after moving) a G0 or G1 will take you there. But if you use a G28 afterwards it should go back to machine home. or marlin uses some G commands different?

@properprinting 2 года назад

@@duncyy7471 Maybe Laser GRBL does things differently, but this is the behavior it shown.

@jacobvdheide 2 года назад

So you got the product and the packaging. When are you starting to sell?

@properprinting 2 года назад

I'll post the 3D printable files on my website soon after I've done some more tweaks. I don't think I'm going to sell it as an assembly any time soon. This'll take too much time and would be too expensive. Maybe I'm going to sell the non-3D printable parts as a kit. The extruder as it is now is just a part of the extruder series I'm working on with my quest for the strongest 3D print possible using unconventional methods.

@brandoneich2412 2 года назад

Any updates on your extruder design?

@properprinting 2 года назад

Next video!

@spartan3299 2 года назад

@@properprinting Getting ready to take my money!

@Rob_65 2 года назад

Just one tip: don't peek at the laser with your good eye 😁

@carlo-ter-woord 2 года назад

10/10 Intro 😂

@hrdcpy Год назад

Camera sensors also dislike laser light.

@bluelive23 2 года назад

Sucks burning bits into the shopvac, giving it lots of air and fuel... Ja ja :) (goeie reden om een stalen shopvac te hebben.)

@GUCR44 2 года назад

Cool stuff man! I would love to meet sometime. Would be a good time! Peace Rolfie

@panorytmypanorythms5348 2 года назад

Hi, this look awesome!! can I buy your software somehow? It looks awesome use copyright and spread it for your fun base !

@properprinting 2 года назад

Awesome! Send me a message through my contact page properprinting.pro/about/ and I can send it to you for free! Due to safety reasons I don't want to share it openly.

@shaunmorrissey7313 2 года назад

Hands up. Who thought the first laser cut doodle was going to be a cock and balls? I feel cheated😁

@Sithhy 2 года назад

Have you seen the packaging template?

@whatif8741 2 года назад

Nice Fker I mean Fender 😆

@RoycoNL 2 года назад

I can smell this video

@properprinting 2 года назад

I still smell it haha xD

@BenRyherd 2 года назад

Yeah.... Gcode isn't the same across all machines (seems like a bad choice to me as well).... You were like "why doesn't G28 home?" and I was like "Probably because your laser engraver doesn't run marlin, and that's marlin's GCode command for home." Also, from the last time I used Slicer for Fusion there were checkboxes on the export to include the numbers and the alignment holes (the rectangles you deleted) so you should be able to turn those off and not have to delete them every time.

@properprinting 2 года назад

Thanks for the tip! I found the alignment hole checkbox, but these added extra alignment holes xD Maybe I havent looked good enough

@austinc9153 2 года назад

You have to factor in the material used for the folds

@properprinting 2 года назад

True, and I assumed the "Material thickness allowance" parameter took care of that.

@austinc9153 2 года назад

@@properprinting honestly I'm still new to 3d printing and didn't even know there was a parameter for that, I would have just added a few mm to the model in the file where the folds are. I still have a lot to learn about different software though

@properprinting 2 года назад

@@austinc9153 Awesome, welcome! There's definitely a lot to learn! I hope one day to become better at Blender.

@austinc9153 2 года назад

@@properprinting I know, it's almost a little overwhelming given the extreme versatility 3d printers allow, and that's the main one I'm working on learning besides the cura slicer, blender has so many different applications from what I've seen. But I love your videos and your models, I actually used your low profile power supply mod on my ender 3, it's got a thicker power supply than the pro but in combination with damper feet works great, just needed some modification for the bottom cover

@properprinting 2 года назад

@@austinc9153 It's overwhelming indeed. I can clearly remember when I first started and had to figure out how to actually print something out of PLA. I tend to forget that things like there are not common knowledge. Awesome that you've managed to add the low profile power supply mod, the actual design which kicked off my channel (together with the folding mechanism)

@jonhaze7537 2 года назад

Diode lasers are horrible for using as a laser engraver. Fiber and CO2 are the way to go hands down! Hell, I have handheld laser pointers that are almost 8000mw =X