Тёмный

MAP Sensor Cleaning 

ScrewsNutsAndBolts
Подписаться 113 тыс.
Просмотров 168 тыс.
50% 1

Removing and cleaning the MAP (manifold absolute pressure) sensor on a 2001 to 2008 Peugeot 307 1.4 litre petrol. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 MAF Cleaner ~ amzn.to/3v7BQJu
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.com
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer:
Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Screwsnutsandbolts recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

Авто/Мото

Опубликовано:

 

23 июн 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 103   
@screwsnutsandbolts
@screwsnutsandbolts 2 года назад
Thanks for watching my video. If you found this or any of my other videos helpful, maybe you could consider supporting my channel by using the ‘♡ Thanks’ button below each of my videos. Your support would be greatly appreciated, thank you ! 👍 Screwsnutsandbolts
@b.t.pburgertimeproduction8
@b.t.pburgertimeproduction8 Год назад
May I ask what you used to clean it with
@smartweartech3089
@smartweartech3089 3 года назад
great vid, short and explicit, not talking for half hour.
@screwsnutsandbolts
@screwsnutsandbolts 3 года назад
Thanks for watching :)
@joannaatkins822
@joannaatkins822 3 года назад
Wow, a simple, easy, practical video with no buggering about. THANK YOU.
@screwsnutsandbolts
@screwsnutsandbolts 3 года назад
You're welcome :)
@eyesofthetiger3568
@eyesofthetiger3568 3 года назад
Very straightforward explanation. I enjoyed watching it. Many thanks for sharing.
@realfaithlife2104
@realfaithlife2104 3 года назад
This video was clean and straightforward...how it should be done. Much appreciated and super helpful. S/O from Richmond, VA.
@screwsnutsandbolts
@screwsnutsandbolts 3 года назад
Thanks very much ! :)
@hewasdeadwhenigotthere46
@hewasdeadwhenigotthere46 Год назад
Worked for me. 👍🤝
@TheLaxBroseph
@TheLaxBroseph Год назад
Thanks for posting, have to do this soon
@screwsnutsandbolts
@screwsnutsandbolts Год назад
You're welcome !
@hassanaldossari2509
@hassanaldossari2509 4 года назад
So relax you are :)
@screwsnutsandbolts
@screwsnutsandbolts 4 года назад
😊 thank you
@ranjeetbhoirekar350
@ranjeetbhoirekar350 Год назад
It is always good to remove negative terminal of battery before removing any sensor. It avoids any potential damage to sensor. I am sure, you must have done it, but should have been shown in video.
@screwsnutsandbolts
@screwsnutsandbolts Год назад
Yes you're right, I usually remove the negative terminal before carrying out any work on electrical components
@harryalbur8382
@harryalbur8382 2 года назад
corto y al punto.Gracias
@screwsnutsandbolts
@screwsnutsandbolts 2 года назад
You're welcome !
@Scorpion_heart
@Scorpion_heart 4 года назад
Does the sensor have to be one-way? Because it is a broken sensor and its direction is variable.
@Grenadieros
@Grenadieros 3 года назад
At 2:43 i think a little bit of contact cleaner spray would help.
@darrenangel461
@darrenangel461 10 месяцев назад
Great informative video well made sir.
@screwsnutsandbolts
@screwsnutsandbolts 10 месяцев назад
Thank you !
@codylujan
@codylujan 2 года назад
I've been reading your comments about rough idle. you could also try cleaning / replacing your mass airflow sensor. Ignition coils go after some time too. not always spark plugs.
@screwsnutsandbolts
@screwsnutsandbolts 2 года назад
Thanks for the tips 👍
@kayleeblack4303
@kayleeblack4303 2 года назад
If you have a MAP, you won't have a MAF.
@codylujan
@codylujan 2 года назад
@@kayleeblack4303 yes you can. MAF will be right on the intakes and the MAP will be post-intercooler or pre-throttle body. MAP is a pressure sensor. it has nothing to do with airflow.
@ricowade4987
@ricowade4987 11 месяцев назад
@@kayleeblack4303 LOL difference between "pressure" and "air flow"
@miguelpaolino6508
@miguelpaolino6508 2 года назад
A suitable MAP sensor cleaner is any contact cleaner that leaves no residue after drying, which AFAIK is all of them. Do not spend your money using a MAF sensor cleaner in a MAP, that is for a completely different type of sensor. If in doubt think about where the MAP sensor is placed vs the MAF sensor. MAP sensors are always exposed to engine oil, hence resistant to petroleum based solvents. MAF sensors are placed before the throttle body where almost no oil recirculation should reach it.
@venervalencia5029
@venervalencia5029 2 года назад
Is maf cleaner can damage car if using for map sensor cleaning?
@DavidFlores-qp9dm
@DavidFlores-qp9dm 2 года назад
Yes this is true i end up replasing my map sensor
@Dracasethaen
@Dracasethaen Год назад
CRC's QD Electronics cleaner cleans MAPs very well, no residue. Have been using it for years, and it's pretty handy for any sensitive electronics, electromechanical equipment, and isn't as aggressive as their Lectramotive or MAF cleaner.
@nunograca7416
@nunograca7416 3 года назад
Hello thank you for vídeo, did you notice any difference on the performance or consumption of the car after cleaning the MAP sensor Thank you
@screwsnutsandbolts
@screwsnutsandbolts 3 года назад
Not on this occasion.
@blixasice
@blixasice 3 месяца назад
My MAP sensor is harder to reach than this one
@halloweenjunkie666
@halloweenjunkie666 Год назад
I cleaned my map sensor and the check engine came on a few minutes later after running the car. It only goes off once I get the car moving at a certain speed...amazon does have the part GM for $48 which is awesome ☆
@Draugluin999
@Draugluin999 2 года назад
Need to do this on my 05' ford escape my engine light is on because of this someone said i can clean it with brake fluid but I'd rather use a maf cleaner like you did thanks
@CadillacDriver
@CadillacDriver 2 года назад
Brake fluid? Yikes
@MrJCMacDonald
@MrJCMacDonald Год назад
I think they meant brake cleaner?
@djmaplesyrupbaby
@djmaplesyrupbaby 2 года назад
This is ASMR
@jimb1580
@jimb1580 Год назад
😄
@zzhughesd
@zzhughesd Год назад
P0105 !!!! Yes , been here !
@screwsnutsandbolts
@screwsnutsandbolts Год назад
This is from the Haynes manual: "The Intake air temperature sensor is integral with the throttle housing and is not available separately"
@zzhughesd
@zzhughesd Год назад
@@screwsnutsandbolts aha. Great. Many many many thanks. I’m at the throttle body next. Found oil water oil mix gloop at the throttle !!!! … and in the air filter box and filter. Maybe long standing former engine problem. Who knows. Running car idle driveway awaiting new air filter. Without filter. Box straight through. Is noticeably better. Cleared code scanner. Will clean up the throttle next. May even get a used throttle. Thanks again. MAP changed. Air filter. Only throttle body left.
@screwsnutsandbolts
@screwsnutsandbolts Год назад
@@zzhughesd You're welcome. Best of luck ! 👍
@techtravel8702
@techtravel8702 2 года назад
Sir all car both sensor maf and maf? Or only one?
@screwsnutsandbolts
@screwsnutsandbolts 2 года назад
It is the same with MAP and MAF cleaning
@vlatter9537
@vlatter9537 6 месяцев назад
Is Throttle Body & Air Intake Cleaner a suitable alternative?
@screwsnutsandbolts
@screwsnutsandbolts 6 месяцев назад
I don't think so. That can leave a small residue which might affect the sensor reading
@TikTok_Sucks
@TikTok_Sucks 6 месяцев назад
No. Try some CRC electrical cleaner. It costs a lot less than MAF/MAP specific cleaners.
@wooddee6079
@wooddee6079 2 года назад
can i use Mass air flow Cleaner by CRC spray to clean it?
@screwsnutsandbolts
@screwsnutsandbolts 2 года назад
Yes you can
@b.t.pburgertimeproduction8
@b.t.pburgertimeproduction8 Год назад
There's my answer 😁
@ejer.
@ejer. 3 года назад
Man, why did not you use a car scanner. It would be easier. My car had the same prb like yours. I pit new spark plug, throttle body and celan MAP and MAF. After scanner, the problem was coil.
@mr.markov7519
@mr.markov7519 Год назад
I have a 308 / 2010 and stupidly I can´t locate the map sensor. It´s not on the same spot as it is in this 307. Where should I look?
@screwsnutsandbolts
@screwsnutsandbolts Год назад
Which engine ?
@mr.markov7519
@mr.markov7519 Год назад
@@screwsnutsandbolts 1.6 vti
@screwsnutsandbolts
@screwsnutsandbolts Год назад
Does this look like your engine: images.ilcats.ru/getImage.php?catalog=peugeot&filename=pr/87/0007/00076387.jpg&hash=185815a6b43e2e840c789cee973ffc52
@screwsnutsandbolts
@screwsnutsandbolts Год назад
If it is, I think it's the sensor marked number 12
@mr.markov7519
@mr.markov7519 Год назад
Thanks, looks like map. I will check it.
@gelfeatherweight5335
@gelfeatherweight5335 11 месяцев назад
Why does this not look like a MAP sensor?
@renzcaparas9230
@renzcaparas9230 3 года назад
Can i use contact cleaner to clean my map sensor?
@screwsnutsandbolts
@screwsnutsandbolts 3 года назад
I'm not sure to be honest. I've heard some people say it's ok and others say that contact cleaner can leave a residue on the sensor
@azarahwagner2749
@azarahwagner2749 3 года назад
If MAP sensor is dirty it’s best to replace it since they only have a 12 month warranty
@navidhaqpk
@navidhaqpk Год назад
Can I use carb-cleaner for this?
@screwsnutsandbolts
@screwsnutsandbolts Год назад
It's not recommended.
@navidhaqpk
@navidhaqpk Год назад
@@screwsnutsandbolts thanks what about using ctc?
@screwsnutsandbolts
@screwsnutsandbolts Год назад
@@navidhaqpk ctc ? contact cleaner ?
@navidhaqpk
@navidhaqpk Год назад
@@screwsnutsandbolts yes contact cleaner
@screwsnutsandbolts
@screwsnutsandbolts Год назад
@@navidhaqpk I've heard some people say it's ok to use contact cleaner and others say it leaves a small amout of residue behind so it might be ok but I'm not 100% sure.
@darkotimov4759
@darkotimov4759 3 года назад
Is WD 40 ok for cleaning
@screwsnutsandbolts
@screwsnutsandbolts 3 года назад
No it's not recommended for this
@foxtrotbravo
@foxtrotbravo 2 года назад
@@screwsnutsandbolts so what is recommended?
@eliasbalbuena9625
@eliasbalbuena9625 2 года назад
@@foxtrotbravo Mass air flow Cleaner by CRC or equivalent for MAF should do the job, safe on the plastics and dries quick.
@jgv1852
@jgv1852 2 года назад
@@screwsnutsandbolts can i use contact cleaner?
@screwsnutsandbolts
@screwsnutsandbolts 2 года назад
@@jgv1852 Contact cleaner leaves a small residue on the sensor and I'm not sure if that would affect its function. You can see what I mean if you spray a bit on a window or mirror.
@isaiahw1995ify
@isaiahw1995ify 4 года назад
What was your car doing for you to feel the need to clean the sensor??
@screwsnutsandbolts
@screwsnutsandbolts 4 года назад
It's idling a bit rough and sometimes it's a bit hesitant on acceleration so I just thought I'd clean this to see if it would make a difference. It didn't :)
@Dan007UT
@Dan007UT 3 года назад
@@screwsnutsandbolts did you find out what was causing your rough idle ?
@screwsnutsandbolts
@screwsnutsandbolts 3 года назад
@@Dan007UT Not yet. I have a second 307 and it idles slightly rough as well !. I've renewed the spark plugs and air filter in both of them and cleaned both throttle bodies and they both still idle a little rough. I'll keep trying ! :)
@Dan007UT
@Dan007UT 3 года назад
@Kevin R no is that a hard thing to do? I have some basic tools or should I just take it somewhere to have done
@screwsnutsandbolts
@screwsnutsandbolts 3 года назад
@Kevin R I haven't tried that yet, thanks for the suggestion :)
@azarahwagner2749
@azarahwagner2749 3 года назад
Never use brake cleaner, electrical connector cleaner is the mildest , throttle cleaner is aggressive . JUST cleaning alone without testing is worthless since map sensors only have a 12 month warranty
@ragnaroksangel
@ragnaroksangel 2 года назад
He used MAF sensor cleaner. And fuck off with that. If cleaning it fixes the problem, then it fixes the problem. Not everybody has the funds to just run out and start firing the parts cannon any time something goes wrong. Most things can just be cleaned and be fine if you maintain everything like you should. What stupid advice
@chiefdenis
@chiefdenis 2 года назад
@@ragnaroksangel 😂😂😂classic American consumerism at play
@jimb1580
@jimb1580 Год назад
THANK YOU, Azarah! I don't have electrical cleaning spray on hand --- could I use rubbing alcohol (isopropyl alcohol) in a spritzer bottle and then let the MAP sensor dry out before reinstalling it? Please advise... Much appreciated...
@richardwilliams9815
@richardwilliams9815 Год назад
That's not a map sensor. That's intake air temperature.
@robertficek7586
@robertficek7586 Год назад
Its a MAP + Intake temp sensor, with 4 pins
@javiercetina
@javiercetina Год назад
I noticed you used MAF sensor cleaner to clean the MAP sensor! Is this OK, because I cleaned my MAP sensor with MAF sensor cleaner, using the exact same brand that’s in the picture of your video, and now my check engine light is on.
@screwsnutsandbolts
@screwsnutsandbolts Год назад
MAF sensor cleaner is fine for cleaning MAP sensors. Did you take the car for a drive to see if the light goes out by itself ?
@MOSKOVICH88
@MOSKOVICH88 Год назад
Лада калина форевер ёпта!
Далее
MAF SENSOR CLEANING
13:09
Просмотров 61 тыс.
MAP Sensor Cleaning Tutorial
3:36
Просмотров 28 тыс.
skibidi toilet 76 (part 1)
03:10
Просмотров 15 млн
MAF Sensor Cleaning in Slow Motion
9:03
Просмотров 388 тыс.
SYMPTOMS OF A BAD MAP SENSOR
3:50
Просмотров 812 тыс.
10 Symptoms Of A Bad MAP Sensor & DIY Fixes
9:18
Просмотров 17 тыс.
MAP Sensor - Manifold Absolute Pressure - Explained
4:03
Proses Buat Spoiler Hino Lohan
0:55
Просмотров 12 млн
Respect🥺
0:35
Просмотров 3,1 млн
The Sidi Rex Boots🔥 #motorcycle #racing #shorts
0:14
W truck driver #edit #trollface
0:20
Просмотров 5 млн