No video :(

Mapei Ultracolor Plus FA Grout Complete Guide for DIYers, plus how to avoid any and all issues.

Подписаться 177

Просмотров 41 тыс.

50% 1

I allowed this grout to fully dry on an off cut to test Jeff's assertion that it is impossible to remove if allowed to dry on the tile. It came right off of these glossy porcelain tiles using an average razor scraper, as did the grout haze. So it seems that only highly porous tiles are at risk if the grout is left for too long before cleanup, so bear that in mind.
Reference Videos:
1.)Jeff from Home RenoVision DIY: • This Grouting Mistake ...
2.) DIYers Response to Jeff from Home RenoVision DIY: • My Response to Jeff fr...
3.) DIYers grouting mistake with Ultracolor: • How to Avoid a Groutin...
4.) Tile Coach Isaac Ostrom's Grout Performance Video showing the superiority of Mapei Ultracolor: • WHICH GROUT IS BEST???... (Fast forward to the 37:00 minute mark for results)
Mapei Ultracolor Plus FA Grout Complete Guide Pitfalls Issues Dries Sets Set too fast Disaster Color Variation Color Wrong Color Too Light Blotchy Look Horrible Look Bad Avoid Problems

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@ResponseDigitalMedia Год назад

Thanks for the detailed mixing instructions. If you hadn’t shown the mixing in real time I would’ve added more water because at first it just does not look like the right mix, but then as you demonstrated it comes out perfect. I did 1 pound for my first batch and 2 pounds from my second batch and I’m about to start my third but wanted to stop and thank you for your video, because I too saw the other video discouraging the use of the ultracolor and almost didn’t use it.

@johng9562 Год назад

🙂

@602rmiller 9 месяцев назад

Showing the entire mixing process was so helpful! Thanks for taking the time to do that.

@pauljohnson7468 Год назад

You, sir, did a phenomenal job of giving clear and precise directions for this grout. I followed your instructions to the letter, kept the room as cool as I could (starting early in the AM), and my grout turned out great….with plenty of pot time. And I had no qualms mixing smaller batches in order to be careful and consistent. Thanks so much!!!

@johng9562 Год назад

🙂

@sonydesigns Год назад

man, This tutorial safe me 3 hours. I was looking information on how to do this and others RU-vidr scare me out but glad I found this video. just did my bathroom under 1 hour. No problem at all thank to this film. Thank you man!

@johng9562 Год назад

♥

@davidchristensen4033 Год назад

Just finished grouting an outdoor grill here in Phoenix. 2lb batches(hand stirred) using refrigerated distilled water. Started 6am with umbrella for shade. Plenty of work time and great color accuracy and consistency. Looks great!

@johng9562 Год назад

🙂

@davefarmery8180 Год назад

Do not use a mechanical mixer , mix it by hand , if you are mixing a full bag then use a dril on slow and don't overmix it , the more you mix the fazter it will go hard

@stevelumsdon9882 Год назад

Great video, thank you. We are about to use this grout to tile our kitchen. We will be following your advice. One thing I may add is that based upon my recent experience with the thinset mixing, I found that adding the water to the mixing bucket before adding the grout powder will ease the mixing process and reduce dry clumps of the powder, whether it’s grout or thinset. Thanks again for the video.

@2121212147 Год назад

Best grout on the market hands down. I have 25yrs experience and I've learned my lessons with this grout as well as many others. If it's dialed in .......it's a dream to work with.

@danielharper2366 8 месяцев назад

I don't care for mapei products. They aren't bad, but I don't think they're superior to Custom products.

@michaelzientara668 3 месяца назад

Thanks for a great/simple video on how to mix the Mapei Ultracolor Plus FA grout. It was super helpful and our tile job turned out great.

@johng9562 3 месяца назад

@gordonblank6845 5 месяцев назад

I followed your directions and didn't have any problems. Weighed the powder, measured the water (RO) and mixed. I was hesitant but all was good. While mixing it looked like there wasn't enough water but I continued to work the powder into a nice mix. I live in Phoenix and was concerned about the low humidity but I had 15 to 20 minutes of working time. It's as easy as John G said, follow the instructions.

@johng9562 5 месяцев назад

@sjhuskey 2 месяца назад

Thanks for giving a clear ratio of grout to water!

@johng9562 2 месяца назад

@Dedendwight Год назад

This video and your explanation, demo, and all the information is great! Thanks for the clear, easy to understand, straightforward instruction. You've done a nice job on your bathroom.

@BillRay-bb7ui Год назад

Just finished grouting in a repair. Worked perfect! I would have messed up if I hadn't watched your video and put WAY too much water. Measured like you said and it was perfect. THANKS!

@nikbo40 2 года назад

Used your formula, 5#/17.5 oz distilled water. used paddle mixer (slowly)/slaked, then hand mixed. Had plenty of time. Had to wash it twice as much because I used charcoal grout on a grey porcelain floor tile (Lowes) with a rough surface to prevent tile staining.Gonna bring a garden hose in to facilitate changing rinse water. THX so much.

@user-bx3in1nt1i 4 месяца назад

Instructions were perfect for this material! Thanks for relieving any stress using this product. Our backsplash turned out great!!

@johng9562 4 месяца назад

🙂

@patrickrexroat7292 Год назад

Great video summarizing everything I've researched so far! I was going to use the CQ product due to the fear about FA....but I discovered it was going to scratch the finish on my subway tile (I tested it, and it did scratch the glossy finish). I guess the media is much larger in CQ. I read that FA will not scratch it (or much less chance). Your tip to use distilled water is something I have not found on any other video. Great tip! One thing to add that can't hurt, some guys have said it's best to lower the temperature in the house the day you grout. They said they ask the homeowner to lower it to 68 degrees on tile day. I will use FA this weekend thanks to your great video. Thanks.

@johng9562 Год назад

❤

@l34rn25 Год назад

Just grout my shower floor and thank you for this videos. All goes well and according to plan. Set my thermostat to 66 and hand mix it with cold water and I got all the time in the world to grout and clean.

@nicwatchestoomuch7 2 года назад

This is the best video I have found!! Thank you so much! I was worried about using this grout, but I also couldn’t find a product as durable. Going to grout right now.🤞

@johng9562 2 года назад

@johnbarney5787 Год назад

Great video! I'm about to use this and saw the " DO NOT USE" video. I bought it last year so I couldn't take it back. I'll let you know how it went.

@darrylday30 Год назад

Thanks. I hadn’t thought of using distilled water. Your instructions are excellent.

@zcolavecchia Год назад

i would for sure have added more water without seeing this man thank you!!!

@damon4427 Год назад

Of all the videos I’ve seen regarding this particular grout, THIS video explains it best. Thank you!

@lindabeaudoin8911 2 года назад

Thank you so much! Because of your so perfect video I succeed doing my grout even though it was my first experience. Thanks again!!! 👌😎

@diyfferent Год назад

Cool. We're glad our video was helpful for your project :)

@homunculustextathon Год назад

Thanks for your help. Our backsplash came out perfect precisely because we followed your well researched and explained instructions.

@anitaworden1779 Месяц назад

Thanks so much for making this video! Very helpful!

@johng9562 Месяц назад

✌

@Jursorama 7 месяцев назад

Thanks John-- I'm about to use this stuff and I'm glad I caught your video (was about to use my drill to mix)-- you bathroom looks excellent-- Cheers!

@johng9562 7 месяцев назад

@thewood66 Год назад

Thank you for your video. I bought this grout because the flooring store I bought it at didn't have the traditional grout in the color I needed. I knew the grout would dry fast after watching the Home RenoVision video. I am using the grout to fill in some deep crevices in the tiles along several inside and outside corners my walk in shower. To help fill the large crevices, I was using a quart ziplock bag to squeeze the grout in. I set the bag down to smooth out some of the grout and when I went to pick up the bag in about 15 to 20 minutes to lay down more grout, the bag was solid as a rock and very hot. I'm wondering if the grout hardened quicker because it was sealed in the plastic bag? I only got half the job done and will definitely be working much quicker the next time and also my wife will be helping. This grout definitely dries quicker but when it sets it is a much better grout!

@johng9562 Год назад

🙂

@taimanchan4434 2 года назад

best/clearest explanation ever. THANK YOU, THANK YOU

@dhauraney Год назад

Thanks for the great video. I'm about to use this product and would have used my drill as per the mfg's TDS and mixed to wetter consistency for sure. Confident I can get this right thanks to your video.

@CB-vg1wq 2 месяца назад

Your tile work was excellent!

@johng9562 2 месяца назад

Thx

@davidwhite5721 5 месяцев назад

I'm using this at the weekend definitely 100% would of used more water year late but brilliant tip and video many thanks

@johng9562 5 месяцев назад

@dimitrypavlovsky1115 8 месяцев назад

Thank you so much for sharing your findings! This video was super helpful.

@johng9562 8 месяцев назад

❤

@Wavelover33 Год назад

This stuff is great and so easy to use. Just put it on and 10-15 minutes later wipe it with a sponge. Lots of working time for the amount I use per batch (2lbs mixed with just over 200ml of cold water - 220/230 ml). Lasts long enough to put it down and wipe. I don’t understand the fear of this product. It’s excellent and you can get the job done quickly plus the stuff is so much better lasting than the non FA stuff

@jeremyjohn7622 8 месяцев назад

We all needed a video like this. Will give it a whirl tomorrow 👍 much appreciated

@johng9562 8 месяцев назад

😜

@MasterToneMods 2 года назад

Everything you said is spot on.

@RenegadeJD Год назад

Thanks for the video and information and for sharing your experience.

@bradwelliver4536 2 года назад

Great video follow this exactly and you won’t go wrong.

@Bamaboompa Год назад

👍Thanks for a very well done video Got just one question. Got a small amount of grout for just replacing 8 small tiles. Can’t find my kitchen scale. Do you know how much volume of grout per pound? Very hard to tell from the video, maybe around one cup per pound? Also for a small batch I wonder about mixing it in a one gallon freezer bag. Just knead it to your consistency then snip a corner. Seems like keeping the air out of it would give a little more time and make for easier cleanup. Thanks again.

@GregDidier 2 года назад

Perfect instructions. Thanks

@dmorrone111 2 года назад

Thank you, Jeff!

@brandonldonaldson Год назад

Followed your instructions. Worked perfectly. Thanks, bro.

@johng9562 Год назад

@plembonicities6263 Год назад

Very helpful. Thank you.

@timlutkins7629 Год назад

How much area would you cover at once (3/16" lines)? How long before you go back and sponge?? Thx

@PhillyPianst Год назад

Great video

@brucecorman7304 Год назад

Thank you

@johng9562 Год назад

@brucecorman7304 Год назад

I actually put the formula and it worked out perfectly.

@kociarz46 10 месяцев назад

Question Did you use sealer after using mapei ultra color plus fa On your tiles after applying the grout?

@johng9562 10 месяцев назад

Not as of today, which has been one year now. Since it is water, mold, and stain resistant, sealant is not mandated, but I was considering doing it anyway just to make more it like epoxy grout, which is totally waterproof.